Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v4.16-rc4 1108 lines 27 kB view raw
1/* 2 * DRM driver for Pervasive Displays RePaper branded e-ink panels 3 * 4 * Copyright 2013-2017 Pervasive Displays, Inc. 5 * Copyright 2017 Noralf Trønnes 6 * 7 * The driver supports: 8 * Material Film: Aurora Mb (V231) 9 * Driver IC: G2 (eTC) 10 * 11 * The controller code was taken from the userspace driver: 12 * https://github.com/repaper/gratis 13 * 14 * This program is free software; you can redistribute it and/or modify 15 * it under the terms of the GNU General Public License as published by 16 * the Free Software Foundation; either version 2 of the License, or 17 * (at your option) any later version. 18 */ 19 20#include <linux/delay.h> 21#include <linux/dma-buf.h> 22#include <linux/gpio/consumer.h> 23#include <linux/module.h> 24#include <linux/of_device.h> 25#include <linux/sched/clock.h> 26#include <linux/spi/spi.h> 27#include <linux/thermal.h> 28 29#include <drm/drm_gem_framebuffer_helper.h> 30#include <drm/tinydrm/tinydrm.h> 31#include <drm/tinydrm/tinydrm-helpers.h> 32 33#define REPAPER_RID_G2_COG_ID 0x12 34 35enum repaper_model { 36 E1144CS021 = 1, 37 E1190CS021, 38 E2200CS021, 39 E2271CS021, 40}; 41 42enum repaper_stage { /* Image pixel -> Display pixel */ 43 REPAPER_COMPENSATE, /* B -> W, W -> B (Current Image) */ 44 REPAPER_WHITE, /* B -> N, W -> W (Current Image) */ 45 REPAPER_INVERSE, /* B -> N, W -> B (New Image) */ 46 REPAPER_NORMAL /* B -> B, W -> W (New Image) */ 47}; 48 49enum repaper_epd_border_byte { 50 REPAPER_BORDER_BYTE_NONE, 51 REPAPER_BORDER_BYTE_ZERO, 52 REPAPER_BORDER_BYTE_SET, 53}; 54 55struct repaper_epd { 56 struct tinydrm_device tinydrm; 57 struct spi_device *spi; 58 59 struct gpio_desc *panel_on; 60 struct gpio_desc *border; 61 struct gpio_desc *discharge; 62 struct gpio_desc *reset; 63 struct gpio_desc *busy; 64 65 struct thermal_zone_device *thermal; 66 67 unsigned int height; 68 unsigned int width; 69 unsigned int bytes_per_scan; 70 const u8 *channel_select; 71 unsigned int stage_time; 72 unsigned int factored_stage_time; 73 bool middle_scan; 74 bool pre_border_byte; 75 enum repaper_epd_border_byte border_byte; 76 77 u8 *line_buffer; 78 void *current_frame; 79 80 bool enabled; 81 bool cleared; 82 bool partial; 83}; 84 85static inline struct repaper_epd * 86epd_from_tinydrm(struct tinydrm_device *tdev) 87{ 88 return container_of(tdev, struct repaper_epd, tinydrm); 89} 90 91static int repaper_spi_transfer(struct spi_device *spi, u8 header, 92 const void *tx, void *rx, size_t len) 93{ 94 void *txbuf = NULL, *rxbuf = NULL; 95 struct spi_transfer tr[2] = {}; 96 u8 *headerbuf; 97 int ret; 98 99 headerbuf = kmalloc(1, GFP_KERNEL); 100 if (!headerbuf) 101 return -ENOMEM; 102 103 headerbuf[0] = header; 104 tr[0].tx_buf = headerbuf; 105 tr[0].len = 1; 106 107 /* Stack allocated tx? */ 108 if (tx && len <= 32) { 109 txbuf = kmalloc(len, GFP_KERNEL); 110 if (!txbuf) { 111 ret = -ENOMEM; 112 goto out_free; 113 } 114 memcpy(txbuf, tx, len); 115 } 116 117 if (rx) { 118 rxbuf = kmalloc(len, GFP_KERNEL); 119 if (!rxbuf) { 120 ret = -ENOMEM; 121 goto out_free; 122 } 123 } 124 125 tr[1].tx_buf = txbuf ? txbuf : tx; 126 tr[1].rx_buf = rxbuf; 127 tr[1].len = len; 128 129 ndelay(80); 130 ret = spi_sync_transfer(spi, tr, 2); 131 if (rx && !ret) 132 memcpy(rx, rxbuf, len); 133 134out_free: 135 kfree(headerbuf); 136 kfree(txbuf); 137 kfree(rxbuf); 138 139 return ret; 140} 141 142static int repaper_write_buf(struct spi_device *spi, u8 reg, 143 const u8 *buf, size_t len) 144{ 145 int ret; 146 147 ret = repaper_spi_transfer(spi, 0x70, &reg, NULL, 1); 148 if (ret) 149 return ret; 150 151 return repaper_spi_transfer(spi, 0x72, buf, NULL, len); 152} 153 154static int repaper_write_val(struct spi_device *spi, u8 reg, u8 val) 155{ 156 return repaper_write_buf(spi, reg, &val, 1); 157} 158 159static int repaper_read_val(struct spi_device *spi, u8 reg) 160{ 161 int ret; 162 u8 val; 163 164 ret = repaper_spi_transfer(spi, 0x70, &reg, NULL, 1); 165 if (ret) 166 return ret; 167 168 ret = repaper_spi_transfer(spi, 0x73, NULL, &val, 1); 169 170 return ret ? ret : val; 171} 172 173static int repaper_read_id(struct spi_device *spi) 174{ 175 int ret; 176 u8 id; 177 178 ret = repaper_spi_transfer(spi, 0x71, NULL, &id, 1); 179 180 return ret ? ret : id; 181} 182 183static void repaper_spi_mosi_low(struct spi_device *spi) 184{ 185 const u8 buf[1] = { 0 }; 186 187 spi_write(spi, buf, 1); 188} 189 190/* pixels on display are numbered from 1 so even is actually bits 1,3,5,... */ 191static void repaper_even_pixels(struct repaper_epd *epd, u8 **pp, 192 const u8 *data, u8 fixed_value, const u8 *mask, 193 enum repaper_stage stage) 194{ 195 unsigned int b; 196 197 for (b = 0; b < (epd->width / 8); b++) { 198 if (data) { 199 u8 pixels = data[b] & 0xaa; 200 u8 pixel_mask = 0xff; 201 u8 p1, p2, p3, p4; 202 203 if (mask) { 204 pixel_mask = (mask[b] ^ pixels) & 0xaa; 205 pixel_mask |= pixel_mask >> 1; 206 } 207 208 switch (stage) { 209 case REPAPER_COMPENSATE: /* B -> W, W -> B (Current) */ 210 pixels = 0xaa | ((pixels ^ 0xaa) >> 1); 211 break; 212 case REPAPER_WHITE: /* B -> N, W -> W (Current) */ 213 pixels = 0x55 + ((pixels ^ 0xaa) >> 1); 214 break; 215 case REPAPER_INVERSE: /* B -> N, W -> B (New) */ 216 pixels = 0x55 | (pixels ^ 0xaa); 217 break; 218 case REPAPER_NORMAL: /* B -> B, W -> W (New) */ 219 pixels = 0xaa | (pixels >> 1); 220 break; 221 } 222 223 pixels = (pixels & pixel_mask) | (~pixel_mask & 0x55); 224 p1 = (pixels >> 6) & 0x03; 225 p2 = (pixels >> 4) & 0x03; 226 p3 = (pixels >> 2) & 0x03; 227 p4 = (pixels >> 0) & 0x03; 228 pixels = (p1 << 0) | (p2 << 2) | (p3 << 4) | (p4 << 6); 229 *(*pp)++ = pixels; 230 } else { 231 *(*pp)++ = fixed_value; 232 } 233 } 234} 235 236/* pixels on display are numbered from 1 so odd is actually bits 0,2,4,... */ 237static void repaper_odd_pixels(struct repaper_epd *epd, u8 **pp, 238 const u8 *data, u8 fixed_value, const u8 *mask, 239 enum repaper_stage stage) 240{ 241 unsigned int b; 242 243 for (b = epd->width / 8; b > 0; b--) { 244 if (data) { 245 u8 pixels = data[b - 1] & 0x55; 246 u8 pixel_mask = 0xff; 247 248 if (mask) { 249 pixel_mask = (mask[b - 1] ^ pixels) & 0x55; 250 pixel_mask |= pixel_mask << 1; 251 } 252 253 switch (stage) { 254 case REPAPER_COMPENSATE: /* B -> W, W -> B (Current) */ 255 pixels = 0xaa | (pixels ^ 0x55); 256 break; 257 case REPAPER_WHITE: /* B -> N, W -> W (Current) */ 258 pixels = 0x55 + (pixels ^ 0x55); 259 break; 260 case REPAPER_INVERSE: /* B -> N, W -> B (New) */ 261 pixels = 0x55 | ((pixels ^ 0x55) << 1); 262 break; 263 case REPAPER_NORMAL: /* B -> B, W -> W (New) */ 264 pixels = 0xaa | pixels; 265 break; 266 } 267 268 pixels = (pixels & pixel_mask) | (~pixel_mask & 0x55); 269 *(*pp)++ = pixels; 270 } else { 271 *(*pp)++ = fixed_value; 272 } 273 } 274} 275 276/* interleave bits: (byte)76543210 -> (16 bit).7.6.5.4.3.2.1 */ 277static inline u16 repaper_interleave_bits(u16 value) 278{ 279 value = (value | (value << 4)) & 0x0f0f; 280 value = (value | (value << 2)) & 0x3333; 281 value = (value | (value << 1)) & 0x5555; 282 283 return value; 284} 285 286/* pixels on display are numbered from 1 */ 287static void repaper_all_pixels(struct repaper_epd *epd, u8 **pp, 288 const u8 *data, u8 fixed_value, const u8 *mask, 289 enum repaper_stage stage) 290{ 291 unsigned int b; 292 293 for (b = epd->width / 8; b > 0; b--) { 294 if (data) { 295 u16 pixels = repaper_interleave_bits(data[b - 1]); 296 u16 pixel_mask = 0xffff; 297 298 if (mask) { 299 pixel_mask = repaper_interleave_bits(mask[b - 1]); 300 301 pixel_mask = (pixel_mask ^ pixels) & 0x5555; 302 pixel_mask |= pixel_mask << 1; 303 } 304 305 switch (stage) { 306 case REPAPER_COMPENSATE: /* B -> W, W -> B (Current) */ 307 pixels = 0xaaaa | (pixels ^ 0x5555); 308 break; 309 case REPAPER_WHITE: /* B -> N, W -> W (Current) */ 310 pixels = 0x5555 + (pixels ^ 0x5555); 311 break; 312 case REPAPER_INVERSE: /* B -> N, W -> B (New) */ 313 pixels = 0x5555 | ((pixels ^ 0x5555) << 1); 314 break; 315 case REPAPER_NORMAL: /* B -> B, W -> W (New) */ 316 pixels = 0xaaaa | pixels; 317 break; 318 } 319 320 pixels = (pixels & pixel_mask) | (~pixel_mask & 0x5555); 321 *(*pp)++ = pixels >> 8; 322 *(*pp)++ = pixels; 323 } else { 324 *(*pp)++ = fixed_value; 325 *(*pp)++ = fixed_value; 326 } 327 } 328} 329 330/* output one line of scan and data bytes to the display */ 331static void repaper_one_line(struct repaper_epd *epd, unsigned int line, 332 const u8 *data, u8 fixed_value, const u8 *mask, 333 enum repaper_stage stage) 334{ 335 u8 *p = epd->line_buffer; 336 unsigned int b; 337 338 repaper_spi_mosi_low(epd->spi); 339 340 if (epd->pre_border_byte) 341 *p++ = 0x00; 342 343 if (epd->middle_scan) { 344 /* data bytes */ 345 repaper_odd_pixels(epd, &p, data, fixed_value, mask, stage); 346 347 /* scan line */ 348 for (b = epd->bytes_per_scan; b > 0; b--) { 349 if (line / 4 == b - 1) 350 *p++ = 0x03 << (2 * (line & 0x03)); 351 else 352 *p++ = 0x00; 353 } 354 355 /* data bytes */ 356 repaper_even_pixels(epd, &p, data, fixed_value, mask, stage); 357 } else { 358 /* 359 * even scan line, but as lines on display are numbered from 1, 360 * line: 1,3,5,... 361 */ 362 for (b = 0; b < epd->bytes_per_scan; b++) { 363 if (0 != (line & 0x01) && line / 8 == b) 364 *p++ = 0xc0 >> (line & 0x06); 365 else 366 *p++ = 0x00; 367 } 368 369 /* data bytes */ 370 repaper_all_pixels(epd, &p, data, fixed_value, mask, stage); 371 372 /* 373 * odd scan line, but as lines on display are numbered from 1, 374 * line: 0,2,4,6,... 375 */ 376 for (b = epd->bytes_per_scan; b > 0; b--) { 377 if (0 == (line & 0x01) && line / 8 == b - 1) 378 *p++ = 0x03 << (line & 0x06); 379 else 380 *p++ = 0x00; 381 } 382 } 383 384 switch (epd->border_byte) { 385 case REPAPER_BORDER_BYTE_NONE: 386 break; 387 388 case REPAPER_BORDER_BYTE_ZERO: 389 *p++ = 0x00; 390 break; 391 392 case REPAPER_BORDER_BYTE_SET: 393 switch (stage) { 394 case REPAPER_COMPENSATE: 395 case REPAPER_WHITE: 396 case REPAPER_INVERSE: 397 *p++ = 0x00; 398 break; 399 case REPAPER_NORMAL: 400 *p++ = 0xaa; 401 break; 402 } 403 break; 404 } 405 406 repaper_write_buf(epd->spi, 0x0a, epd->line_buffer, 407 p - epd->line_buffer); 408 409 /* Output data to panel */ 410 repaper_write_val(epd->spi, 0x02, 0x07); 411 412 repaper_spi_mosi_low(epd->spi); 413} 414 415static void repaper_frame_fixed(struct repaper_epd *epd, u8 fixed_value, 416 enum repaper_stage stage) 417{ 418 unsigned int line; 419 420 for (line = 0; line < epd->height; line++) 421 repaper_one_line(epd, line, NULL, fixed_value, NULL, stage); 422} 423 424static void repaper_frame_data(struct repaper_epd *epd, const u8 *image, 425 const u8 *mask, enum repaper_stage stage) 426{ 427 unsigned int line; 428 429 if (!mask) { 430 for (line = 0; line < epd->height; line++) { 431 repaper_one_line(epd, line, 432 &image[line * (epd->width / 8)], 433 0, NULL, stage); 434 } 435 } else { 436 for (line = 0; line < epd->height; line++) { 437 size_t n = line * epd->width / 8; 438 439 repaper_one_line(epd, line, &image[n], 0, &mask[n], 440 stage); 441 } 442 } 443} 444 445static void repaper_frame_fixed_repeat(struct repaper_epd *epd, u8 fixed_value, 446 enum repaper_stage stage) 447{ 448 u64 start = local_clock(); 449 u64 end = start + (epd->factored_stage_time * 1000 * 1000); 450 451 do { 452 repaper_frame_fixed(epd, fixed_value, stage); 453 } while (local_clock() < end); 454} 455 456static void repaper_frame_data_repeat(struct repaper_epd *epd, const u8 *image, 457 const u8 *mask, enum repaper_stage stage) 458{ 459 u64 start = local_clock(); 460 u64 end = start + (epd->factored_stage_time * 1000 * 1000); 461 462 do { 463 repaper_frame_data(epd, image, mask, stage); 464 } while (local_clock() < end); 465} 466 467static void repaper_get_temperature(struct repaper_epd *epd) 468{ 469 int ret, temperature = 0; 470 unsigned int factor10x; 471 472 if (!epd->thermal) 473 return; 474 475 ret = thermal_zone_get_temp(epd->thermal, &temperature); 476 if (ret) { 477 DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n", ret); 478 return; 479 } 480 481 temperature /= 1000; 482 483 if (temperature <= -10) 484 factor10x = 170; 485 else if (temperature <= -5) 486 factor10x = 120; 487 else if (temperature <= 5) 488 factor10x = 80; 489 else if (temperature <= 10) 490 factor10x = 40; 491 else if (temperature <= 15) 492 factor10x = 30; 493 else if (temperature <= 20) 494 factor10x = 20; 495 else if (temperature <= 40) 496 factor10x = 10; 497 else 498 factor10x = 7; 499 500 epd->factored_stage_time = epd->stage_time * factor10x / 10; 501} 502 503static void repaper_gray8_to_mono_reversed(u8 *buf, u32 width, u32 height) 504{ 505 u8 *gray8 = buf, *mono = buf; 506 int y, xb, i; 507 508 for (y = 0; y < height; y++) 509 for (xb = 0; xb < width / 8; xb++) { 510 u8 byte = 0x00; 511 512 for (i = 0; i < 8; i++) { 513 int x = xb * 8 + i; 514 515 byte >>= 1; 516 if (gray8[y * width + x] >> 7) 517 byte |= BIT(7); 518 } 519 *mono++ = byte; 520 } 521} 522 523static int repaper_fb_dirty(struct drm_framebuffer *fb, 524 struct drm_file *file_priv, 525 unsigned int flags, unsigned int color, 526 struct drm_clip_rect *clips, 527 unsigned int num_clips) 528{ 529 struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0); 530 struct dma_buf_attachment *import_attach = cma_obj->base.import_attach; 531 struct tinydrm_device *tdev = fb->dev->dev_private; 532 struct repaper_epd *epd = epd_from_tinydrm(tdev); 533 struct drm_clip_rect clip; 534 u8 *buf = NULL; 535 int ret = 0; 536 537 /* repaper can't do partial updates */ 538 clip.x1 = 0; 539 clip.x2 = fb->width; 540 clip.y1 = 0; 541 clip.y2 = fb->height; 542 543 mutex_lock(&tdev->dirty_lock); 544 545 if (!epd->enabled) 546 goto out_unlock; 547 548 /* fbdev can flush even when we're not interested */ 549 if (tdev->pipe.plane.fb != fb) 550 goto out_unlock; 551 552 repaper_get_temperature(epd); 553 554 DRM_DEBUG("Flushing [FB:%d] st=%ums\n", fb->base.id, 555 epd->factored_stage_time); 556 557 buf = kmalloc(fb->width * fb->height, GFP_KERNEL); 558 if (!buf) { 559 ret = -ENOMEM; 560 goto out_unlock; 561 } 562 563 if (import_attach) { 564 ret = dma_buf_begin_cpu_access(import_attach->dmabuf, 565 DMA_FROM_DEVICE); 566 if (ret) 567 goto out_unlock; 568 } 569 570 tinydrm_xrgb8888_to_gray8(buf, cma_obj->vaddr, fb, &clip); 571 572 if (import_attach) { 573 ret = dma_buf_end_cpu_access(import_attach->dmabuf, 574 DMA_FROM_DEVICE); 575 if (ret) 576 goto out_unlock; 577 } 578 579 repaper_gray8_to_mono_reversed(buf, fb->width, fb->height); 580 581 if (epd->partial) { 582 repaper_frame_data_repeat(epd, buf, epd->current_frame, 583 REPAPER_NORMAL); 584 } else if (epd->cleared) { 585 repaper_frame_data_repeat(epd, epd->current_frame, NULL, 586 REPAPER_COMPENSATE); 587 repaper_frame_data_repeat(epd, epd->current_frame, NULL, 588 REPAPER_WHITE); 589 repaper_frame_data_repeat(epd, buf, NULL, REPAPER_INVERSE); 590 repaper_frame_data_repeat(epd, buf, NULL, REPAPER_NORMAL); 591 592 epd->partial = true; 593 } else { 594 /* Clear display (anything -> white) */ 595 repaper_frame_fixed_repeat(epd, 0xff, REPAPER_COMPENSATE); 596 repaper_frame_fixed_repeat(epd, 0xff, REPAPER_WHITE); 597 repaper_frame_fixed_repeat(epd, 0xaa, REPAPER_INVERSE); 598 repaper_frame_fixed_repeat(epd, 0xaa, REPAPER_NORMAL); 599 600 /* Assuming a clear (white) screen output an image */ 601 repaper_frame_fixed_repeat(epd, 0xaa, REPAPER_COMPENSATE); 602 repaper_frame_fixed_repeat(epd, 0xaa, REPAPER_WHITE); 603 repaper_frame_data_repeat(epd, buf, NULL, REPAPER_INVERSE); 604 repaper_frame_data_repeat(epd, buf, NULL, REPAPER_NORMAL); 605 606 epd->cleared = true; 607 epd->partial = true; 608 } 609 610 memcpy(epd->current_frame, buf, fb->width * fb->height / 8); 611 612 /* 613 * An extra frame write is needed if pixels are set in the bottom line, 614 * or else grey lines rises up from the pixels 615 */ 616 if (epd->pre_border_byte) { 617 unsigned int x; 618 619 for (x = 0; x < (fb->width / 8); x++) 620 if (buf[x + (fb->width * (fb->height - 1) / 8)]) { 621 repaper_frame_data_repeat(epd, buf, 622 epd->current_frame, 623 REPAPER_NORMAL); 624 break; 625 } 626 } 627 628out_unlock: 629 mutex_unlock(&tdev->dirty_lock); 630 631 if (ret) 632 DRM_DEV_ERROR(fb->dev->dev, "Failed to update display (%d)\n", ret); 633 kfree(buf); 634 635 return ret; 636} 637 638static const struct drm_framebuffer_funcs repaper_fb_funcs = { 639 .destroy = drm_gem_fb_destroy, 640 .create_handle = drm_gem_fb_create_handle, 641 .dirty = repaper_fb_dirty, 642}; 643 644static void power_off(struct repaper_epd *epd) 645{ 646 /* Turn off power and all signals */ 647 gpiod_set_value_cansleep(epd->reset, 0); 648 gpiod_set_value_cansleep(epd->panel_on, 0); 649 if (epd->border) 650 gpiod_set_value_cansleep(epd->border, 0); 651 652 /* Ensure SPI MOSI and CLOCK are Low before CS Low */ 653 repaper_spi_mosi_low(epd->spi); 654 655 /* Discharge pulse */ 656 gpiod_set_value_cansleep(epd->discharge, 1); 657 msleep(150); 658 gpiod_set_value_cansleep(epd->discharge, 0); 659} 660 661static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe, 662 struct drm_crtc_state *crtc_state) 663{ 664 struct tinydrm_device *tdev = pipe_to_tinydrm(pipe); 665 struct repaper_epd *epd = epd_from_tinydrm(tdev); 666 struct spi_device *spi = epd->spi; 667 struct device *dev = &spi->dev; 668 bool dc_ok = false; 669 int i, ret; 670 671 DRM_DEBUG_DRIVER("\n"); 672 673 /* Power up sequence */ 674 gpiod_set_value_cansleep(epd->reset, 0); 675 gpiod_set_value_cansleep(epd->panel_on, 0); 676 gpiod_set_value_cansleep(epd->discharge, 0); 677 if (epd->border) 678 gpiod_set_value_cansleep(epd->border, 0); 679 repaper_spi_mosi_low(spi); 680 usleep_range(5000, 10000); 681 682 gpiod_set_value_cansleep(epd->panel_on, 1); 683 /* 684 * This delay comes from the repaper.org userspace driver, it's not 685 * mentioned in the datasheet. 686 */ 687 usleep_range(10000, 15000); 688 gpiod_set_value_cansleep(epd->reset, 1); 689 if (epd->border) 690 gpiod_set_value_cansleep(epd->border, 1); 691 usleep_range(5000, 10000); 692 gpiod_set_value_cansleep(epd->reset, 0); 693 usleep_range(5000, 10000); 694 gpiod_set_value_cansleep(epd->reset, 1); 695 usleep_range(5000, 10000); 696 697 /* Wait for COG to become ready */ 698 for (i = 100; i > 0; i--) { 699 if (!gpiod_get_value_cansleep(epd->busy)) 700 break; 701 702 usleep_range(10, 100); 703 } 704 705 if (!i) { 706 DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n"); 707 power_off(epd); 708 return; 709 } 710 711 repaper_read_id(spi); 712 ret = repaper_read_id(spi); 713 if (ret != REPAPER_RID_G2_COG_ID) { 714 if (ret < 0) 715 dev_err(dev, "failed to read chip (%d)\n", ret); 716 else 717 dev_err(dev, "wrong COG ID 0x%02x\n", ret); 718 power_off(epd); 719 return; 720 } 721 722 /* Disable OE */ 723 repaper_write_val(spi, 0x02, 0x40); 724 725 ret = repaper_read_val(spi, 0x0f); 726 if (ret < 0 || !(ret & 0x80)) { 727 if (ret < 0) 728 DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret); 729 else 730 DRM_DEV_ERROR(dev, "panel is reported broken\n"); 731 power_off(epd); 732 return; 733 } 734 735 /* Power saving mode */ 736 repaper_write_val(spi, 0x0b, 0x02); 737 /* Channel select */ 738 repaper_write_buf(spi, 0x01, epd->channel_select, 8); 739 /* High power mode osc */ 740 repaper_write_val(spi, 0x07, 0xd1); 741 /* Power setting */ 742 repaper_write_val(spi, 0x08, 0x02); 743 /* Vcom level */ 744 repaper_write_val(spi, 0x09, 0xc2); 745 /* Power setting */ 746 repaper_write_val(spi, 0x04, 0x03); 747 /* Driver latch on */ 748 repaper_write_val(spi, 0x03, 0x01); 749 /* Driver latch off */ 750 repaper_write_val(spi, 0x03, 0x00); 751 usleep_range(5000, 10000); 752 753 /* Start chargepump */ 754 for (i = 0; i < 4; ++i) { 755 /* Charge pump positive voltage on - VGH/VDL on */ 756 repaper_write_val(spi, 0x05, 0x01); 757 msleep(240); 758 759 /* Charge pump negative voltage on - VGL/VDL on */ 760 repaper_write_val(spi, 0x05, 0x03); 761 msleep(40); 762 763 /* Charge pump Vcom on - Vcom driver on */ 764 repaper_write_val(spi, 0x05, 0x0f); 765 msleep(40); 766 767 /* check DC/DC */ 768 ret = repaper_read_val(spi, 0x0f); 769 if (ret < 0) { 770 DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret); 771 power_off(epd); 772 return; 773 } 774 775 if (ret & 0x40) { 776 dc_ok = true; 777 break; 778 } 779 } 780 781 if (!dc_ok) { 782 DRM_DEV_ERROR(dev, "dc/dc failed\n"); 783 power_off(epd); 784 return; 785 } 786 787 /* 788 * Output enable to disable 789 * The userspace driver sets this to 0x04, but the datasheet says 0x06 790 */ 791 repaper_write_val(spi, 0x02, 0x04); 792 793 epd->enabled = true; 794 epd->partial = false; 795} 796 797static void repaper_pipe_disable(struct drm_simple_display_pipe *pipe) 798{ 799 struct tinydrm_device *tdev = pipe_to_tinydrm(pipe); 800 struct repaper_epd *epd = epd_from_tinydrm(tdev); 801 struct spi_device *spi = epd->spi; 802 unsigned int line; 803 804 DRM_DEBUG_DRIVER("\n"); 805 806 mutex_lock(&tdev->dirty_lock); 807 epd->enabled = false; 808 mutex_unlock(&tdev->dirty_lock); 809 810 /* Nothing frame */ 811 for (line = 0; line < epd->height; line++) 812 repaper_one_line(epd, 0x7fffu, NULL, 0x00, NULL, 813 REPAPER_COMPENSATE); 814 815 /* 2.7" */ 816 if (epd->border) { 817 /* Dummy line */ 818 repaper_one_line(epd, 0x7fffu, NULL, 0x00, NULL, 819 REPAPER_COMPENSATE); 820 msleep(25); 821 gpiod_set_value_cansleep(epd->border, 0); 822 msleep(200); 823 gpiod_set_value_cansleep(epd->border, 1); 824 } else { 825 /* Border dummy line */ 826 repaper_one_line(epd, 0x7fffu, NULL, 0x00, NULL, 827 REPAPER_NORMAL); 828 msleep(200); 829 } 830 831 /* not described in datasheet */ 832 repaper_write_val(spi, 0x0b, 0x00); 833 /* Latch reset turn on */ 834 repaper_write_val(spi, 0x03, 0x01); 835 /* Power off charge pump Vcom */ 836 repaper_write_val(spi, 0x05, 0x03); 837 /* Power off charge pump neg voltage */ 838 repaper_write_val(spi, 0x05, 0x01); 839 msleep(120); 840 /* Discharge internal */ 841 repaper_write_val(spi, 0x04, 0x80); 842 /* turn off all charge pumps */ 843 repaper_write_val(spi, 0x05, 0x00); 844 /* Turn off osc */ 845 repaper_write_val(spi, 0x07, 0x01); 846 msleep(50); 847 848 power_off(epd); 849} 850 851static const struct drm_simple_display_pipe_funcs repaper_pipe_funcs = { 852 .enable = repaper_pipe_enable, 853 .disable = repaper_pipe_disable, 854 .update = tinydrm_display_pipe_update, 855 .prepare_fb = tinydrm_display_pipe_prepare_fb, 856}; 857 858static const uint32_t repaper_formats[] = { 859 DRM_FORMAT_XRGB8888, 860}; 861 862static const struct drm_display_mode repaper_e1144cs021_mode = { 863 TINYDRM_MODE(128, 96, 29, 22), 864}; 865 866static const u8 repaper_e1144cs021_cs[] = { 0x00, 0x00, 0x00, 0x00, 867 0x00, 0x0f, 0xff, 0x00 }; 868 869static const struct drm_display_mode repaper_e1190cs021_mode = { 870 TINYDRM_MODE(144, 128, 36, 32), 871}; 872 873static const u8 repaper_e1190cs021_cs[] = { 0x00, 0x00, 0x00, 0x03, 874 0xfc, 0x00, 0x00, 0xff }; 875 876static const struct drm_display_mode repaper_e2200cs021_mode = { 877 TINYDRM_MODE(200, 96, 46, 22), 878}; 879 880static const u8 repaper_e2200cs021_cs[] = { 0x00, 0x00, 0x00, 0x00, 881 0x01, 0xff, 0xe0, 0x00 }; 882 883static const struct drm_display_mode repaper_e2271cs021_mode = { 884 TINYDRM_MODE(264, 176, 57, 38), 885}; 886 887static const u8 repaper_e2271cs021_cs[] = { 0x00, 0x00, 0x00, 0x7f, 888 0xff, 0xfe, 0x00, 0x00 }; 889 890DEFINE_DRM_GEM_CMA_FOPS(repaper_fops); 891 892static struct drm_driver repaper_driver = { 893 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | 894 DRIVER_ATOMIC, 895 .fops = &repaper_fops, 896 TINYDRM_GEM_DRIVER_OPS, 897 .name = "repaper", 898 .desc = "Pervasive Displays RePaper e-ink panels", 899 .date = "20170405", 900 .major = 1, 901 .minor = 0, 902}; 903 904static const struct of_device_id repaper_of_match[] = { 905 { .compatible = "pervasive,e1144cs021", .data = (void *)E1144CS021 }, 906 { .compatible = "pervasive,e1190cs021", .data = (void *)E1190CS021 }, 907 { .compatible = "pervasive,e2200cs021", .data = (void *)E2200CS021 }, 908 { .compatible = "pervasive,e2271cs021", .data = (void *)E2271CS021 }, 909 {}, 910}; 911MODULE_DEVICE_TABLE(of, repaper_of_match); 912 913static const struct spi_device_id repaper_id[] = { 914 { "e1144cs021", E1144CS021 }, 915 { "e1190cs021", E1190CS021 }, 916 { "e2200cs021", E2200CS021 }, 917 { "e2271cs021", E2271CS021 }, 918 { }, 919}; 920MODULE_DEVICE_TABLE(spi, repaper_id); 921 922static int repaper_probe(struct spi_device *spi) 923{ 924 const struct drm_display_mode *mode; 925 const struct spi_device_id *spi_id; 926 const struct of_device_id *match; 927 struct device *dev = &spi->dev; 928 struct tinydrm_device *tdev; 929 enum repaper_model model; 930 const char *thermal_zone; 931 struct repaper_epd *epd; 932 size_t line_buffer_size; 933 int ret; 934 935 match = of_match_device(repaper_of_match, dev); 936 if (match) { 937 model = (enum repaper_model)match->data; 938 } else { 939 spi_id = spi_get_device_id(spi); 940 model = spi_id->driver_data; 941 } 942 943 /* The SPI device is used to allocate dma memory */ 944 if (!dev->coherent_dma_mask) { 945 ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); 946 if (ret) { 947 dev_warn(dev, "Failed to set dma mask %d\n", ret); 948 return ret; 949 } 950 } 951 952 epd = devm_kzalloc(dev, sizeof(*epd), GFP_KERNEL); 953 if (!epd) 954 return -ENOMEM; 955 956 epd->spi = spi; 957 958 epd->panel_on = devm_gpiod_get(dev, "panel-on", GPIOD_OUT_LOW); 959 if (IS_ERR(epd->panel_on)) { 960 ret = PTR_ERR(epd->panel_on); 961 if (ret != -EPROBE_DEFER) 962 DRM_DEV_ERROR(dev, "Failed to get gpio 'panel-on'\n"); 963 return ret; 964 } 965 966 epd->discharge = devm_gpiod_get(dev, "discharge", GPIOD_OUT_LOW); 967 if (IS_ERR(epd->discharge)) { 968 ret = PTR_ERR(epd->discharge); 969 if (ret != -EPROBE_DEFER) 970 DRM_DEV_ERROR(dev, "Failed to get gpio 'discharge'\n"); 971 return ret; 972 } 973 974 epd->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); 975 if (IS_ERR(epd->reset)) { 976 ret = PTR_ERR(epd->reset); 977 if (ret != -EPROBE_DEFER) 978 DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n"); 979 return ret; 980 } 981 982 epd->busy = devm_gpiod_get(dev, "busy", GPIOD_IN); 983 if (IS_ERR(epd->busy)) { 984 ret = PTR_ERR(epd->busy); 985 if (ret != -EPROBE_DEFER) 986 DRM_DEV_ERROR(dev, "Failed to get gpio 'busy'\n"); 987 return ret; 988 } 989 990 if (!device_property_read_string(dev, "pervasive,thermal-zone", 991 &thermal_zone)) { 992 epd->thermal = thermal_zone_get_zone_by_name(thermal_zone); 993 if (IS_ERR(epd->thermal)) { 994 DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n", thermal_zone); 995 return PTR_ERR(epd->thermal); 996 } 997 } 998 999 switch (model) { 1000 case E1144CS021: 1001 mode = &repaper_e1144cs021_mode; 1002 epd->channel_select = repaper_e1144cs021_cs; 1003 epd->stage_time = 480; 1004 epd->bytes_per_scan = 96 / 4; 1005 epd->middle_scan = true; /* data-scan-data */ 1006 epd->pre_border_byte = false; 1007 epd->border_byte = REPAPER_BORDER_BYTE_ZERO; 1008 break; 1009 1010 case E1190CS021: 1011 mode = &repaper_e1190cs021_mode; 1012 epd->channel_select = repaper_e1190cs021_cs; 1013 epd->stage_time = 480; 1014 epd->bytes_per_scan = 128 / 4 / 2; 1015 epd->middle_scan = false; /* scan-data-scan */ 1016 epd->pre_border_byte = false; 1017 epd->border_byte = REPAPER_BORDER_BYTE_SET; 1018 break; 1019 1020 case E2200CS021: 1021 mode = &repaper_e2200cs021_mode; 1022 epd->channel_select = repaper_e2200cs021_cs; 1023 epd->stage_time = 480; 1024 epd->bytes_per_scan = 96 / 4; 1025 epd->middle_scan = true; /* data-scan-data */ 1026 epd->pre_border_byte = true; 1027 epd->border_byte = REPAPER_BORDER_BYTE_NONE; 1028 break; 1029 1030 case E2271CS021: 1031 epd->border = devm_gpiod_get(dev, "border", GPIOD_OUT_LOW); 1032 if (IS_ERR(epd->border)) { 1033 ret = PTR_ERR(epd->border); 1034 if (ret != -EPROBE_DEFER) 1035 DRM_DEV_ERROR(dev, "Failed to get gpio 'border'\n"); 1036 return ret; 1037 } 1038 1039 mode = &repaper_e2271cs021_mode; 1040 epd->channel_select = repaper_e2271cs021_cs; 1041 epd->stage_time = 630; 1042 epd->bytes_per_scan = 176 / 4; 1043 epd->middle_scan = true; /* data-scan-data */ 1044 epd->pre_border_byte = true; 1045 epd->border_byte = REPAPER_BORDER_BYTE_NONE; 1046 break; 1047 1048 default: 1049 return -ENODEV; 1050 } 1051 1052 epd->width = mode->hdisplay; 1053 epd->height = mode->vdisplay; 1054 epd->factored_stage_time = epd->stage_time; 1055 1056 line_buffer_size = 2 * epd->width / 8 + epd->bytes_per_scan + 2; 1057 epd->line_buffer = devm_kzalloc(dev, line_buffer_size, GFP_KERNEL); 1058 if (!epd->line_buffer) 1059 return -ENOMEM; 1060 1061 epd->current_frame = devm_kzalloc(dev, epd->width * epd->height / 8, 1062 GFP_KERNEL); 1063 if (!epd->current_frame) 1064 return -ENOMEM; 1065 1066 tdev = &epd->tinydrm; 1067 1068 ret = devm_tinydrm_init(dev, tdev, &repaper_fb_funcs, &repaper_driver); 1069 if (ret) 1070 return ret; 1071 1072 ret = tinydrm_display_pipe_init(tdev, &repaper_pipe_funcs, 1073 DRM_MODE_CONNECTOR_VIRTUAL, 1074 repaper_formats, 1075 ARRAY_SIZE(repaper_formats), mode, 0); 1076 if (ret) 1077 return ret; 1078 1079 drm_mode_config_reset(tdev->drm); 1080 spi_set_drvdata(spi, tdev); 1081 1082 DRM_DEBUG_DRIVER("SPI speed: %uMHz\n", spi->max_speed_hz / 1000000); 1083 1084 return devm_tinydrm_register(tdev); 1085} 1086 1087static void repaper_shutdown(struct spi_device *spi) 1088{ 1089 struct tinydrm_device *tdev = spi_get_drvdata(spi); 1090 1091 tinydrm_shutdown(tdev); 1092} 1093 1094static struct spi_driver repaper_spi_driver = { 1095 .driver = { 1096 .name = "repaper", 1097 .owner = THIS_MODULE, 1098 .of_match_table = repaper_of_match, 1099 }, 1100 .id_table = repaper_id, 1101 .probe = repaper_probe, 1102 .shutdown = repaper_shutdown, 1103}; 1104module_spi_driver(repaper_spi_driver); 1105 1106MODULE_DESCRIPTION("Pervasive Displays RePaper DRM driver"); 1107MODULE_AUTHOR("Noralf Trønnes"); 1108MODULE_LICENSE("GPL");