Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1# SPDX-License-Identifier: GPL-2.0
2#
3# SATA/PATA driver configuration
4#
5
6config HAVE_PATA_PLATFORM
7 bool
8 help
9 This is an internal configuration node for any machine that
10 uses pata-platform driver to enable the relevant driver in the
11 configuration structure without having to submit endless patches
12 to update the PATA_PLATFORM entry.
13
14menuconfig ATA
15 tristate "Serial ATA and Parallel ATA drivers (libata)"
16 depends on HAS_IOMEM
17 depends on BLOCK
18 select SCSI
19 select GLOB
20 ---help---
21 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
22 any other ATA device under Linux, say Y and make sure that you know
23 the name of your ATA host adapter (the card inside your computer
24 that "speaks" the ATA protocol, also called ATA controller),
25 because you will be asked for it.
26
27 NOTE: ATA enables basic SCSI support; *however*,
28 'SCSI disk support', 'SCSI tape support', or
29 'SCSI CDROM support' may also be needed,
30 depending on your hardware configuration.
31
32if ATA
33
34config ATA_NONSTANDARD
35 bool
36 default n
37
38config ATA_VERBOSE_ERROR
39 bool "Verbose ATA error reporting"
40 default y
41 help
42 This option adds parsing of ATA command descriptions and error bits
43 in libata kernel output, making it easier to interpret.
44 This option will enlarge the kernel by approx. 6KB. Disable it only
45 if kernel size is more important than ease of debugging.
46
47 If unsure, say Y.
48
49config ATA_ACPI
50 bool "ATA ACPI Support"
51 depends on ACPI
52 default y
53 help
54 This option adds support for ATA-related ACPI objects.
55 These ACPI objects add the ability to retrieve taskfiles
56 from the ACPI BIOS and write them to the disk controller.
57 These objects may be related to performance, security,
58 power management, or other areas.
59 You can disable this at kernel boot time by using the
60 option libata.noacpi=1
61
62config SATA_ZPODD
63 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
64 depends on ATA_ACPI && PM
65 default n
66 help
67 This option adds support for SATA Zero Power Optical Disc
68 Drive (ZPODD). It requires both the ODD and the platform
69 support, and if enabled, will automatically power on/off the
70 ODD when certain condition is satisfied. This does not impact
71 end user's experience of the ODD, only power is saved when
72 the ODD is not in use (i.e. no disc inside).
73
74 If unsure, say N.
75
76config SATA_PMP
77 bool "SATA Port Multiplier support"
78 default y
79 help
80 This option adds support for SATA Port Multipliers
81 (the SATA version of an ethernet hub, or SAS expander).
82
83if HAS_DMA
84
85comment "Controllers with non-SFF native interface"
86
87config SATA_AHCI
88 tristate "AHCI SATA support"
89 depends on PCI
90 help
91 This option enables support for AHCI Serial ATA.
92
93 If unsure, say N.
94
95config SATA_MOBILE_LPM_POLICY
96 int "Default SATA Link Power Management policy for mobile chipsets"
97 range 0 4
98 default 0
99 depends on SATA_AHCI
100 help
101 Select the Default SATA Link Power Management (LPM) policy to use
102 for mobile / laptop variants of chipsets / "South Bridges".
103
104 The value set has the following meanings:
105 0 => Keep firmware settings
106 1 => Maximum performance
107 2 => Medium power
108 3 => Medium power with Device Initiated PM enabled
109 4 => Minimum power
110
111 Note "Minimum power" is known to cause issues, including disk
112 corruption, with some disks and should not be used.
113
114config SATA_AHCI_PLATFORM
115 tristate "Platform AHCI SATA support"
116 help
117 This option enables support for Platform AHCI Serial ATA
118 controllers.
119
120 If unsure, say N.
121
122config AHCI_BRCM
123 tristate "Broadcom AHCI SATA support"
124 depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
125 help
126 This option enables support for the AHCI SATA3 controller found on
127 Broadcom SoC's.
128
129 If unsure, say N.
130
131config AHCI_DA850
132 tristate "DaVinci DA850 AHCI SATA support"
133 depends on ARCH_DAVINCI_DA850
134 help
135 This option enables support for the DaVinci DA850 SoC's
136 onboard AHCI SATA.
137
138 If unsure, say N.
139
140config AHCI_DM816
141 tristate "DaVinci DM816 AHCI SATA support"
142 depends on ARCH_OMAP2PLUS
143 help
144 This option enables support for the DaVinci DM816 SoC's
145 onboard AHCI SATA controller.
146
147 If unsure, say N.
148
149config AHCI_ST
150 tristate "ST AHCI SATA support"
151 depends on ARCH_STI
152 help
153 This option enables support for ST AHCI SATA controller.
154
155 If unsure, say N.
156
157config AHCI_IMX
158 tristate "Freescale i.MX AHCI SATA support"
159 depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
160 depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
161 help
162 This option enables support for the Freescale i.MX SoC's
163 onboard AHCI SATA.
164
165 If unsure, say N.
166
167config AHCI_CEVA
168 tristate "CEVA AHCI SATA support"
169 depends on OF
170 help
171 This option enables support for the CEVA AHCI SATA.
172 It can be found on the Xilinx Zynq UltraScale+ MPSoC.
173
174 If unsure, say N.
175
176config AHCI_MTK
177 tristate "MediaTek AHCI SATA support"
178 depends on ARCH_MEDIATEK
179 select MFD_SYSCON
180 help
181 This option enables support for the MediaTek SoC's
182 onboard AHCI SATA controller.
183
184 If unsure, say N.
185
186config AHCI_MVEBU
187 tristate "Marvell EBU AHCI SATA support"
188 depends on ARCH_MVEBU
189 help
190 This option enables support for the Marvebu EBU SoC's
191 onboard AHCI SATA.
192
193 If unsure, say N.
194
195config AHCI_OCTEON
196 tristate "Cavium Octeon Soc Serial ATA"
197 depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
198 default y
199 help
200 This option enables support for Cavium Octeon SoC Serial ATA.
201
202 If unsure, say N.
203
204config AHCI_SUNXI
205 tristate "Allwinner sunxi AHCI SATA support"
206 depends on ARCH_SUNXI
207 help
208 This option enables support for the Allwinner sunxi SoC's
209 onboard AHCI SATA.
210
211 If unsure, say N.
212
213config AHCI_TEGRA
214 tristate "NVIDIA Tegra124 AHCI SATA support"
215 depends on ARCH_TEGRA
216 help
217 This option enables support for the NVIDIA Tegra124 SoC's
218 onboard AHCI SATA.
219
220 If unsure, say N.
221
222config AHCI_XGENE
223 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
224 depends on PHY_XGENE
225 help
226 This option enables support for APM X-Gene SoC SATA host controller.
227
228config AHCI_QORIQ
229 tristate "Freescale QorIQ AHCI SATA support"
230 depends on OF
231 help
232 This option enables support for the Freescale QorIQ AHCI SoC's
233 onboard AHCI SATA.
234
235 If unsure, say N.
236
237config SATA_FSL
238 tristate "Freescale 3.0Gbps SATA support"
239 depends on FSL_SOC
240 help
241 This option enables support for Freescale 3.0Gbps SATA controller.
242 It can be found on MPC837x and MPC8315.
243
244 If unsure, say N.
245
246config SATA_GEMINI
247 tristate "Gemini SATA bridge support"
248 depends on ARCH_GEMINI || COMPILE_TEST
249 default ARCH_GEMINI
250 help
251 This enabled support for the FTIDE010 to SATA bridge
252 found in Cortina Systems Gemini platform.
253
254 If unsure, say N.
255
256config SATA_AHCI_SEATTLE
257 tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
258 depends on ARCH_SEATTLE
259 help
260 This option enables support for AMD Seattle SATA host controller.
261
262 If unsure, say N
263
264config SATA_INIC162X
265 tristate "Initio 162x SATA support (Very Experimental)"
266 depends on PCI
267 help
268 This option enables support for Initio 162x Serial ATA.
269
270config SATA_ACARD_AHCI
271 tristate "ACard AHCI variant (ATP 8620)"
272 depends on PCI
273 help
274 This option enables support for Acard.
275
276 If unsure, say N.
277
278config SATA_SIL24
279 tristate "Silicon Image 3124/3132 SATA support"
280 depends on PCI
281 help
282 This option enables support for Silicon Image 3124/3132 Serial ATA.
283
284 If unsure, say N.
285
286endif # HAS_DMA
287
288config ATA_SFF
289 bool "ATA SFF support (for legacy IDE and PATA)"
290 default y
291 help
292 This option adds support for ATA controllers with SFF
293 compliant or similar programming interface.
294
295 SFF is the legacy IDE interface that has been around since
296 the dawn of time. Almost all PATA controllers have an
297 SFF interface. Many SATA controllers have an SFF interface
298 when configured into a legacy compatibility mode.
299
300 For users with exclusively modern controllers like AHCI,
301 Silicon Image 3124, or Marvell 6440, you may choose to
302 disable this unneeded SFF support.
303
304 If unsure, say Y.
305
306if ATA_SFF
307
308comment "SFF controllers with custom DMA interface"
309
310config PDC_ADMA
311 tristate "Pacific Digital ADMA support"
312 depends on PCI
313 help
314 This option enables support for Pacific Digital ADMA controllers
315
316 If unsure, say N.
317
318config PATA_OCTEON_CF
319 tristate "OCTEON Boot Bus Compact Flash support"
320 depends on CAVIUM_OCTEON_SOC
321 help
322 This option enables a polled compact flash driver for use with
323 compact flash cards attached to the OCTEON boot bus.
324
325 If unsure, say N.
326
327config SATA_QSTOR
328 tristate "Pacific Digital SATA QStor support"
329 depends on PCI
330 help
331 This option enables support for Pacific Digital Serial ATA QStor.
332
333 If unsure, say N.
334
335config SATA_SX4
336 tristate "Promise SATA SX4 support (Experimental)"
337 depends on PCI
338 help
339 This option enables support for Promise Serial ATA SX4.
340
341 If unsure, say N.
342
343config ATA_BMDMA
344 bool "ATA BMDMA support"
345 depends on HAS_DMA
346 default y
347 help
348 This option adds support for SFF ATA controllers with BMDMA
349 capability. BMDMA stands for bus-master DMA and is the
350 de facto DMA interface for SFF controllers.
351
352 If unsure, say Y.
353
354if ATA_BMDMA
355
356comment "SATA SFF controllers with BMDMA"
357
358config ATA_PIIX
359 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
360 depends on PCI
361 help
362 This option enables support for ICH5/6/7/8 Serial ATA
363 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
364 host controllers.
365
366 If unsure, say N.
367
368config SATA_DWC
369 tristate "DesignWare Cores SATA support"
370 depends on DMADEVICES
371 select GENERIC_PHY
372 help
373 This option enables support for the on-chip SATA controller of the
374 AppliedMicro processor 460EX.
375
376 If unsure, say N.
377
378config SATA_DWC_OLD_DMA
379 bool "Support old device trees"
380 depends on SATA_DWC
381 select DW_DMAC_CORE
382 default y if 460EX
383 help
384 This option enables support for old device trees without the
385 "dmas" property.
386
387config SATA_DWC_DEBUG
388 bool "Debugging driver version"
389 depends on SATA_DWC
390 help
391 This option enables debugging output in the driver.
392
393config SATA_DWC_VDEBUG
394 bool "Verbose debug output"
395 depends on SATA_DWC_DEBUG
396 help
397 This option enables the taskfile dumping and NCQ debugging.
398
399config SATA_HIGHBANK
400 tristate "Calxeda Highbank SATA support"
401 depends on HAS_DMA
402 depends on ARCH_HIGHBANK || COMPILE_TEST
403 help
404 This option enables support for the Calxeda Highbank SoC's
405 onboard SATA.
406
407 If unsure, say N.
408
409config SATA_MV
410 tristate "Marvell SATA support"
411 depends on HAS_DMA
412 depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
413 ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
414 select GENERIC_PHY
415 help
416 This option enables support for the Marvell Serial ATA family.
417 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
418 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
419
420 If unsure, say N.
421
422config SATA_NV
423 tristate "NVIDIA SATA support"
424 depends on PCI
425 help
426 This option enables support for NVIDIA Serial ATA.
427
428 If unsure, say N.
429
430config SATA_PROMISE
431 tristate "Promise SATA TX2/TX4 support"
432 depends on PCI
433 help
434 This option enables support for Promise Serial ATA TX2/TX4.
435
436 If unsure, say N.
437
438config SATA_RCAR
439 tristate "Renesas R-Car SATA support"
440 depends on ARCH_RENESAS || COMPILE_TEST
441 help
442 This option enables support for Renesas R-Car Serial ATA.
443
444 If unsure, say N.
445
446config SATA_SIL
447 tristate "Silicon Image SATA support"
448 depends on PCI
449 help
450 This option enables support for Silicon Image Serial ATA.
451
452 If unsure, say N.
453
454config SATA_SIS
455 tristate "SiS 964/965/966/180 SATA support"
456 depends on PCI
457 select PATA_SIS
458 help
459 This option enables support for SiS Serial ATA on
460 SiS 964/965/966/180 and Parallel ATA on SiS 180.
461 The PATA support for SiS 180 requires additionally to
462 enable the PATA_SIS driver in the config.
463 If unsure, say N.
464
465config SATA_SVW
466 tristate "ServerWorks Frodo / Apple K2 SATA support"
467 depends on PCI
468 help
469 This option enables support for Broadcom/Serverworks/Apple K2
470 SATA support.
471
472 If unsure, say N.
473
474config SATA_ULI
475 tristate "ULi Electronics SATA support"
476 depends on PCI
477 help
478 This option enables support for ULi Electronics SATA.
479
480 If unsure, say N.
481
482config SATA_VIA
483 tristate "VIA SATA support"
484 depends on PCI
485 help
486 This option enables support for VIA Serial ATA.
487
488 If unsure, say N.
489
490config SATA_VITESSE
491 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
492 depends on PCI
493 help
494 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
495
496 If unsure, say N.
497
498comment "PATA SFF controllers with BMDMA"
499
500config PATA_ALI
501 tristate "ALi PATA support"
502 depends on PCI
503 help
504 This option enables support for the ALi ATA interfaces
505 found on the many ALi chipsets.
506
507 If unsure, say N.
508
509config PATA_AMD
510 tristate "AMD/NVidia PATA support"
511 depends on PCI
512 help
513 This option enables support for the AMD and NVidia PATA
514 interfaces found on the chipsets for Athlon/Athlon64.
515
516 If unsure, say N.
517
518config PATA_ARASAN_CF
519 tristate "ARASAN CompactFlash PATA Controller Support"
520 depends on ARCH_SPEAR13XX || COMPILE_TEST
521 depends on DMADEVICES
522 select DMA_ENGINE
523 help
524 Say Y here to support the ARASAN CompactFlash PATA controller
525
526config PATA_ARTOP
527 tristate "ARTOP 6210/6260 PATA support"
528 depends on PCI
529 help
530 This option enables support for ARTOP PATA controllers.
531
532 If unsure, say N.
533
534config PATA_ATIIXP
535 tristate "ATI PATA support"
536 depends on PCI
537 help
538 This option enables support for the ATI ATA interfaces
539 found on the many ATI chipsets.
540
541 If unsure, say N.
542
543config PATA_ATP867X
544 tristate "ARTOP/Acard ATP867X PATA support"
545 depends on PCI
546 help
547 This option enables support for ARTOP/Acard ATP867X PATA
548 controllers.
549
550 If unsure, say N.
551
552config PATA_BF54X
553 tristate "Blackfin 54x ATAPI support"
554 depends on BF542 || BF548 || BF549
555 help
556 This option enables support for the built-in ATAPI controller on
557 Blackfin 54x family chips.
558
559 If unsure, say N.
560
561config PATA_BK3710
562 tristate "Palmchip BK3710 PATA support"
563 depends on ARCH_DAVINCI
564 help
565 This option enables support for the integrated IDE controller on
566 the TI DaVinci SoC.
567
568 If unsure, say N.
569
570config PATA_CMD64X
571 tristate "CMD64x PATA support"
572 depends on PCI
573 help
574 This option enables support for the CMD64x series chips
575 except for the CMD640.
576
577 If unsure, say N.
578
579config PATA_CS5520
580 tristate "CS5510/5520 PATA support"
581 depends on PCI && (X86_32 || COMPILE_TEST)
582 help
583 This option enables support for the Cyrix 5510/5520
584 companion chip used with the MediaGX/Geode processor family.
585
586 If unsure, say N.
587
588config PATA_CS5530
589 tristate "CS5530 PATA support"
590 depends on PCI && (X86_32 || COMPILE_TEST)
591 help
592 This option enables support for the Cyrix/NatSemi/AMD CS5530
593 companion chip used with the MediaGX/Geode processor family.
594
595 If unsure, say N.
596
597config PATA_CS5535
598 tristate "CS5535 PATA support (Experimental)"
599 depends on PCI && X86_32
600 help
601 This option enables support for the NatSemi/AMD CS5535
602 companion chip used with the Geode processor family.
603
604 If unsure, say N.
605
606config PATA_CS5536
607 tristate "CS5536 PATA support"
608 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
609 help
610 This option enables support for the AMD CS5536
611 companion chip used with the Geode LX processor family.
612
613 If unsure, say N.
614
615config PATA_CYPRESS
616 tristate "Cypress CY82C693 PATA support (Very Experimental)"
617 depends on PCI
618 help
619 This option enables support for the Cypress/Contaq CY82C693
620 chipset found in some Alpha systems
621
622 If unsure, say N.
623
624config PATA_EFAR
625 tristate "EFAR SLC90E66 support"
626 depends on PCI
627 help
628 This option enables support for the EFAR SLC90E66
629 IDE controller found on some older machines.
630
631 If unsure, say N.
632
633config PATA_EP93XX
634 tristate "Cirrus Logic EP93xx PATA support"
635 depends on ARCH_EP93XX
636 help
637 This option enables support for the PATA controller in
638 the Cirrus Logic EP9312 and EP9315 ARM CPU.
639
640 If unsure, say N.
641
642config PATA_FTIDE010
643 tristate "Faraday Technology FTIDE010 PATA support"
644 depends on OF
645 depends on ARM
646 depends on SATA_GEMINI
647 help
648 This option enables support for the Faraday FTIDE010
649 PATA controller found in the Cortina Gemini SoCs.
650
651 If unsure, say N.
652
653config PATA_HPT366
654 tristate "HPT 366/368 PATA support"
655 depends on PCI
656 help
657 This option enables support for the HPT 366 and 368
658 PATA controllers via the new ATA layer.
659
660 If unsure, say N.
661
662config PATA_HPT37X
663 tristate "HPT 370/370A/371/372/374/302 PATA support"
664 depends on PCI
665 help
666 This option enables support for the majority of the later HPT
667 PATA controllers via the new ATA layer.
668
669 If unsure, say N.
670
671config PATA_HPT3X2N
672 tristate "HPT 371N/372N/302N PATA support"
673 depends on PCI
674 help
675 This option enables support for the N variant HPT PATA
676 controllers via the new ATA layer.
677
678 If unsure, say N.
679
680config PATA_HPT3X3
681 tristate "HPT 343/363 PATA support"
682 depends on PCI
683 help
684 This option enables support for the HPT 343/363
685 PATA controllers via the new ATA layer
686
687 If unsure, say N.
688
689config PATA_HPT3X3_DMA
690 bool "HPT 343/363 DMA support"
691 depends on PATA_HPT3X3
692 help
693 This option enables DMA support for the HPT343/363
694 controllers. Enable with care as there are still some
695 problems with DMA on this chipset.
696
697config PATA_ICSIDE
698 tristate "Acorn ICS PATA support"
699 depends on ARM && ARCH_ACORN
700 help
701 On Acorn systems, say Y here if you wish to use the ICS PATA
702 interface card. This is not required for ICS partition support.
703 If you are unsure, say N to this.
704
705config PATA_IMX
706 tristate "PATA support for Freescale iMX"
707 depends on ARCH_MXC
708 help
709 This option enables support for the PATA host available on Freescale
710 iMX SoCs.
711
712 If unsure, say N.
713
714config PATA_IT8213
715 tristate "IT8213 PATA support (Experimental)"
716 depends on PCI
717 help
718 This option enables support for the ITE 821 PATA
719 controllers via the new ATA layer.
720
721 If unsure, say N.
722
723config PATA_IT821X
724 tristate "IT8211/2 PATA support"
725 depends on PCI
726 help
727 This option enables support for the ITE 8211 and 8212
728 PATA controllers via the new ATA layer, including RAID
729 mode.
730
731 If unsure, say N.
732
733config PATA_JMICRON
734 tristate "JMicron PATA support"
735 depends on PCI
736 help
737 Enable support for the JMicron IDE controller, via the new
738 ATA layer.
739
740 If unsure, say N.
741
742config PATA_MACIO
743 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
744 depends on PPC_PMAC
745 help
746 Most IDE capable PowerMacs have IDE busses driven by a variant
747 of this controller which is part of the Apple chipset used on
748 most PowerMac models. Some models have multiple busses using
749 different chipsets, though generally, MacIO is one of them.
750
751config PATA_MARVELL
752 tristate "Marvell PATA support via legacy mode"
753 depends on PCI
754 help
755 This option enables limited support for the Marvell 88SE61xx ATA
756 controllers. If you wish to use only the SATA ports then select
757 the AHCI driver alone. If you wish to the use the PATA port or
758 both SATA and PATA include this driver.
759
760 If unsure, say N.
761
762config PATA_MPC52xx
763 tristate "Freescale MPC52xx SoC internal IDE"
764 depends on PPC_MPC52xx && PPC_BESTCOMM
765 select PPC_BESTCOMM_ATA
766 help
767 This option enables support for integrated IDE controller
768 of the Freescale MPC52xx SoC.
769
770 If unsure, say N.
771
772config PATA_NETCELL
773 tristate "NETCELL Revolution RAID support"
774 depends on PCI
775 help
776 This option enables support for the Netcell Revolution RAID
777 PATA controller.
778
779 If unsure, say N.
780
781config PATA_NINJA32
782 tristate "Ninja32/Delkin Cardbus ATA support"
783 depends on PCI
784 help
785 This option enables support for the Ninja32, Delkin and
786 possibly other brands of Cardbus ATA adapter
787
788 If unsure, say N.
789
790config PATA_NS87415
791 tristate "Nat Semi NS87415 PATA support"
792 depends on PCI
793 help
794 This option enables support for the National Semiconductor
795 NS87415 PCI-IDE controller.
796
797 If unsure, say N.
798
799config PATA_OLDPIIX
800 tristate "Intel PATA old PIIX support"
801 depends on PCI
802 help
803 This option enables support for early PIIX PATA support.
804
805 If unsure, say N.
806
807config PATA_OPTIDMA
808 tristate "OPTI FireStar PATA support (Very Experimental)"
809 depends on PCI
810 help
811 This option enables DMA/PIO support for the later OPTi
812 controllers found on some old motherboards and in some
813 laptops.
814
815 If unsure, say N.
816
817config PATA_PDC2027X
818 tristate "Promise PATA 2027x support"
819 depends on PCI
820 help
821 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
822
823 If unsure, say N.
824
825config PATA_PDC_OLD
826 tristate "Older Promise PATA controller support"
827 depends on PCI
828 help
829 This option enables support for the Promise 20246, 20262, 20263,
830 20265 and 20267 adapters.
831
832 If unsure, say N.
833
834config PATA_RADISYS
835 tristate "RADISYS 82600 PATA support (Experimental)"
836 depends on PCI
837 help
838 This option enables support for the RADISYS 82600
839 PATA controllers via the new ATA layer
840
841 If unsure, say N.
842
843config PATA_RDC
844 tristate "RDC PATA support"
845 depends on PCI
846 help
847 This option enables basic support for the later RDC PATA controllers
848 controllers via the new ATA layer. For the RDC 1010, you need to
849 enable the IT821X driver instead.
850
851 If unsure, say N.
852
853config PATA_SC1200
854 tristate "SC1200 PATA support"
855 depends on PCI && (X86_32 || COMPILE_TEST)
856 help
857 This option enables support for the NatSemi/AMD SC1200 SoC
858 companion chip used with the Geode processor family.
859
860 If unsure, say N.
861
862config PATA_SCH
863 tristate "Intel SCH PATA support"
864 depends on PCI
865 help
866 This option enables support for Intel SCH PATA on the Intel
867 SCH (US15W, US15L, UL11L) series host controllers.
868
869 If unsure, say N.
870
871config PATA_SERVERWORKS
872 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
873 depends on PCI
874 help
875 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
876 HT1000 PATA controllers, via the new ATA layer.
877
878 If unsure, say N.
879
880config PATA_SIL680
881 tristate "CMD / Silicon Image 680 PATA support"
882 depends on PCI
883 help
884 This option enables support for CMD / Silicon Image 680 PATA.
885
886 If unsure, say N.
887
888config PATA_SIS
889 tristate "SiS PATA support"
890 depends on PCI
891 help
892 This option enables support for SiS PATA controllers
893
894 If unsure, say N.
895
896config PATA_TOSHIBA
897 tristate "Toshiba Piccolo support (Experimental)"
898 depends on PCI
899 help
900 Support for the Toshiba Piccolo controllers. Currently only the
901 primary channel is supported by this driver.
902
903 If unsure, say N.
904
905config PATA_TRIFLEX
906 tristate "Compaq Triflex PATA support"
907 depends on PCI
908 help
909 Enable support for the Compaq 'Triflex' IDE controller as found
910 on many Compaq Pentium-Pro systems, via the new ATA layer.
911
912 If unsure, say N.
913
914config PATA_VIA
915 tristate "VIA PATA support"
916 depends on PCI
917 help
918 This option enables support for the VIA PATA interfaces
919 found on the many VIA chipsets.
920
921 If unsure, say N.
922
923config PATA_PXA
924 tristate "PXA DMA-capable PATA support"
925 depends on ARCH_PXA
926 help
927 This option enables support for harddrive attached to PXA CPU's bus.
928
929 NOTE: This driver utilizes PXA DMA controller, in case your hardware
930 is not capable of doing MWDMA, use pata_platform instead.
931
932 If unsure, say N.
933
934config PATA_WINBOND
935 tristate "Winbond SL82C105 PATA support"
936 depends on PCI
937 help
938 This option enables support for SL82C105 PATA devices found in the
939 Netwinder and some other systems
940
941 If unsure, say N.
942
943endif # ATA_BMDMA
944
945comment "PIO-only SFF controllers"
946
947config PATA_CMD640_PCI
948 tristate "CMD640 PCI PATA support (Experimental)"
949 depends on PCI
950 help
951 This option enables support for the CMD640 PCI IDE
952 interface chip. Only the primary channel is currently
953 supported.
954
955 If unsure, say N.
956
957config PATA_FALCON
958 tristate "Atari Falcon PATA support"
959 depends on M68K && ATARI
960 help
961 This option enables support for the on-board IDE
962 interface on the Atari Falcon.
963
964 If unsure, say N.
965
966config PATA_ISAPNP
967 tristate "ISA Plug and Play PATA support"
968 depends on ISAPNP
969 help
970 This option enables support for ISA plug & play ATA
971 controllers such as those found on old soundcards.
972
973 If unsure, say N.
974
975config PATA_IXP4XX_CF
976 tristate "IXP4XX Compact Flash support"
977 depends on ARCH_IXP4XX
978 help
979 This option enables support for a Compact Flash connected on
980 the ixp4xx expansion bus. This driver had been written for
981 Loft/Avila boards in mind but can work with others.
982
983 If unsure, say N.
984
985config PATA_MPIIX
986 tristate "Intel PATA MPIIX support"
987 depends on PCI
988 help
989 This option enables support for MPIIX PATA support.
990
991 If unsure, say N.
992
993config PATA_NS87410
994 tristate "Nat Semi NS87410 PATA support"
995 depends on PCI
996 help
997 This option enables support for the National Semiconductor
998 NS87410 PCI-IDE controller.
999
1000 If unsure, say N.
1001
1002config PATA_OPTI
1003 tristate "OPTI621/6215 PATA support (Very Experimental)"
1004 depends on PCI
1005 help
1006 This option enables full PIO support for the early Opti ATA
1007 controllers found on some old motherboards.
1008
1009 If unsure, say N.
1010
1011config PATA_PALMLD
1012 tristate "Palm LifeDrive PATA support"
1013 depends on MACH_PALMLD
1014 help
1015 This option enables support for Palm LifeDrive's internal ATA
1016 port via the new ATA layer.
1017
1018 If unsure, say N.
1019
1020config PATA_PCMCIA
1021 tristate "PCMCIA PATA support"
1022 depends on PCMCIA
1023 help
1024 This option enables support for PCMCIA ATA interfaces, including
1025 compact flash card adapters via the new ATA layer.
1026
1027 If unsure, say N.
1028
1029config PATA_PLATFORM
1030 tristate "Generic platform device PATA support"
1031 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
1032 help
1033 This option enables support for generic directly connected ATA
1034 devices commonly found on embedded systems.
1035
1036 If unsure, say N.
1037
1038config PATA_OF_PLATFORM
1039 tristate "OpenFirmware platform device PATA support"
1040 depends on PATA_PLATFORM && OF
1041 help
1042 This option enables support for generic directly connected ATA
1043 devices commonly found on embedded systems with OpenFirmware
1044 bindings.
1045
1046 If unsure, say N.
1047
1048config PATA_QDI
1049 tristate "QDI VLB PATA support"
1050 depends on ISA
1051 select PATA_LEGACY
1052 help
1053 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
1054
1055config PATA_RB532
1056 tristate "RouterBoard 532 PATA CompactFlash support"
1057 depends on MIKROTIK_RB532
1058 help
1059 This option enables support for the RouterBoard 532
1060 PATA CompactFlash controller.
1061
1062 If unsure, say N.
1063
1064config PATA_RZ1000
1065 tristate "PC Tech RZ1000 PATA support"
1066 depends on PCI
1067 help
1068 This option enables basic support for the PC Tech RZ1000/1
1069 PATA controllers via the new ATA layer
1070
1071 If unsure, say N.
1072
1073config PATA_SAMSUNG_CF
1074 tristate "Samsung SoC PATA support"
1075 depends on SAMSUNG_DEV_IDE
1076 help
1077 This option enables basic support for Samsung's S3C/S5P board
1078 PATA controllers via the new ATA layer
1079
1080 If unsure, say N.
1081
1082config PATA_WINBOND_VLB
1083 tristate "Winbond W83759A VLB PATA support (Experimental)"
1084 depends on ISA
1085 select PATA_LEGACY
1086 help
1087 Support for the Winbond W83759A controller on Vesa Local Bus
1088 systems.
1089
1090comment "Generic fallback / legacy drivers"
1091
1092config PATA_ACPI
1093 tristate "ACPI firmware driver for PATA"
1094 depends on ATA_ACPI && ATA_BMDMA
1095 help
1096 This option enables an ACPI method driver which drives
1097 motherboard PATA controller interfaces through the ACPI
1098 firmware in the BIOS. This driver can sometimes handle
1099 otherwise unsupported hardware.
1100
1101config ATA_GENERIC
1102 tristate "Generic ATA support"
1103 depends on PCI && ATA_BMDMA
1104 help
1105 This option enables support for generic BIOS configured
1106 ATA controllers via the new ATA layer
1107
1108 If unsure, say N.
1109
1110config PATA_LEGACY
1111 tristate "Legacy ISA PATA support (Experimental)"
1112 depends on (ISA || PCI)
1113 help
1114 This option enables support for ISA/VLB/PCI bus legacy PATA
1115 ports and allows them to be accessed via the new ATA layer.
1116
1117 If unsure, say N.
1118
1119endif # ATA_SFF
1120endif # ATA