tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * This header file contains public constants and structures used by
4 * both the SCSI initiator and the SCSI target code.
5 *
6 * For documentation on the OPCODES, MESSAGES, and SENSE values,
7 * please consult the SCSI standard.
8 */
9
10#ifndef _SCSI_PROTO_H_
11#define _SCSI_PROTO_H_
12
13#include <linux/types.h>
14
15/*
16 * SCSI opcodes
17 */
18
19#define TEST_UNIT_READY 0x00
20#define REZERO_UNIT 0x01
21#define REQUEST_SENSE 0x03
22#define FORMAT_UNIT 0x04
23#define READ_BLOCK_LIMITS 0x05
24#define REASSIGN_BLOCKS 0x07
25#define INITIALIZE_ELEMENT_STATUS 0x07
26#define READ_6 0x08
27#define WRITE_6 0x0a
28#define SEEK_6 0x0b
29#define READ_REVERSE 0x0f
30#define WRITE_FILEMARKS 0x10
31#define SPACE 0x11
32#define INQUIRY 0x12
33#define RECOVER_BUFFERED_DATA 0x14
34#define MODE_SELECT 0x15
35#define RESERVE 0x16
36#define RELEASE 0x17
37#define COPY 0x18
38#define ERASE 0x19
39#define MODE_SENSE 0x1a
40#define START_STOP 0x1b
41#define RECEIVE_DIAGNOSTIC 0x1c
42#define SEND_DIAGNOSTIC 0x1d
43#define ALLOW_MEDIUM_REMOVAL 0x1e
44
45#define READ_FORMAT_CAPACITIES 0x23
46#define SET_WINDOW 0x24
47#define READ_CAPACITY 0x25
48#define READ_10 0x28
49#define WRITE_10 0x2a
50#define SEEK_10 0x2b
51#define POSITION_TO_ELEMENT 0x2b
52#define WRITE_VERIFY 0x2e
53#define VERIFY 0x2f
54#define SEARCH_HIGH 0x30
55#define SEARCH_EQUAL 0x31
56#define SEARCH_LOW 0x32
57#define SET_LIMITS 0x33
58#define PRE_FETCH 0x34
59#define READ_POSITION 0x34
60#define SYNCHRONIZE_CACHE 0x35
61#define LOCK_UNLOCK_CACHE 0x36
62#define READ_DEFECT_DATA 0x37
63#define MEDIUM_SCAN 0x38
64#define COMPARE 0x39
65#define COPY_VERIFY 0x3a
66#define WRITE_BUFFER 0x3b
67#define READ_BUFFER 0x3c
68#define UPDATE_BLOCK 0x3d
69#define READ_LONG 0x3e
70#define WRITE_LONG 0x3f
71#define CHANGE_DEFINITION 0x40
72#define WRITE_SAME 0x41
73#define UNMAP 0x42
74#define READ_TOC 0x43
75#define READ_HEADER 0x44
76#define GET_EVENT_STATUS_NOTIFICATION 0x4a
77#define LOG_SELECT 0x4c
78#define LOG_SENSE 0x4d
79#define XDWRITEREAD_10 0x53
80#define MODE_SELECT_10 0x55
81#define RESERVE_10 0x56
82#define RELEASE_10 0x57
83#define MODE_SENSE_10 0x5a
84#define PERSISTENT_RESERVE_IN 0x5e
85#define PERSISTENT_RESERVE_OUT 0x5f
86#define VARIABLE_LENGTH_CMD 0x7f
87#define REPORT_LUNS 0xa0
88#define SECURITY_PROTOCOL_IN 0xa2
89#define MAINTENANCE_IN 0xa3
90#define MAINTENANCE_OUT 0xa4
91#define MOVE_MEDIUM 0xa5
92#define EXCHANGE_MEDIUM 0xa6
93#define READ_12 0xa8
94#define SERVICE_ACTION_OUT_12 0xa9
95#define WRITE_12 0xaa
96#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
97#define SERVICE_ACTION_IN_12 0xab
98#define WRITE_VERIFY_12 0xae
99#define VERIFY_12 0xaf
100#define SEARCH_HIGH_12 0xb0
101#define SEARCH_EQUAL_12 0xb1
102#define SEARCH_LOW_12 0xb2
103#define SECURITY_PROTOCOL_OUT 0xb5
104#define READ_ELEMENT_STATUS 0xb8
105#define SEND_VOLUME_TAG 0xb6
106#define WRITE_LONG_2 0xea
107#define EXTENDED_COPY 0x83
108#define RECEIVE_COPY_RESULTS 0x84
109#define ACCESS_CONTROL_IN 0x86
110#define ACCESS_CONTROL_OUT 0x87
111#define READ_16 0x88
112#define COMPARE_AND_WRITE 0x89
113#define WRITE_16 0x8a
114#define READ_ATTRIBUTE 0x8c
115#define WRITE_ATTRIBUTE 0x8d
116#define WRITE_VERIFY_16 0x8e
117#define VERIFY_16 0x8f
118#define SYNCHRONIZE_CACHE_16 0x91
119#define WRITE_SAME_16 0x93
120#define ZBC_OUT 0x94
121#define ZBC_IN 0x95
122#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
123#define SERVICE_ACTION_IN_16 0x9e
124#define SERVICE_ACTION_OUT_16 0x9f
125/* values for service action in */
126#define SAI_READ_CAPACITY_16 0x10
127#define SAI_GET_LBA_STATUS 0x12
128#define SAI_REPORT_REFERRALS 0x13
129/* values for maintenance in */
130#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
131#define MI_REPORT_TARGET_PGS 0x0a
132#define MI_REPORT_ALIASES 0x0b
133#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
134#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
135#define MI_REPORT_PRIORITY 0x0e
136#define MI_REPORT_TIMESTAMP 0x0f
137#define MI_MANAGEMENT_PROTOCOL_IN 0x10
138/* value for MI_REPORT_TARGET_PGS ext header */
139#define MI_EXT_HDR_PARAM_FMT 0x20
140/* values for maintenance out */
141#define MO_SET_IDENTIFYING_INFORMATION 0x06
142#define MO_SET_TARGET_PGS 0x0a
143#define MO_CHANGE_ALIASES 0x0b
144#define MO_SET_PRIORITY 0x0e
145#define MO_SET_TIMESTAMP 0x0f
146#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
147/* values for ZBC_IN */
148#define ZI_REPORT_ZONES 0x00
149/* values for ZBC_OUT */
150#define ZO_CLOSE_ZONE 0x01
151#define ZO_FINISH_ZONE 0x02
152#define ZO_OPEN_ZONE 0x03
153#define ZO_RESET_WRITE_POINTER 0x04
154/* values for variable length command */
155#define XDREAD_32 0x03
156#define XDWRITE_32 0x04
157#define XPWRITE_32 0x06
158#define XDWRITEREAD_32 0x07
159#define READ_32 0x09
160#define VERIFY_32 0x0a
161#define WRITE_32 0x0b
162#define WRITE_VERIFY_32 0x0c
163#define WRITE_SAME_32 0x0d
164#define ATA_32 0x1ff0
165
166/* Values for T10/04-262r7 */
167#define ATA_16 0x85 /* 16-byte pass-thru */
168#define ATA_12 0xa1 /* 12-byte pass-thru */
169
170/* Vendor specific CDBs start here */
171#define VENDOR_SPECIFIC_CDB 0xc0
172
173/*
174 * SCSI command lengths
175 */
176
177#define SCSI_MAX_VARLEN_CDB_SIZE 260
178
179/* defined in T10 SCSI Primary Commands-2 (SPC2) */
180struct scsi_varlen_cdb_hdr {
181 __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
182 __u8 control;
183 __u8 misc[5];
184 __u8 additional_cdb_length; /* total cdb length - 8 */
185 __be16 service_action;
186 /* service specific data follows */
187};
188
189/*
190 * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
191 * T10/1561-D Revision 4 Draft dated 7th November 2002.
192 */
193#define SAM_STAT_GOOD 0x00
194#define SAM_STAT_CHECK_CONDITION 0x02
195#define SAM_STAT_CONDITION_MET 0x04
196#define SAM_STAT_BUSY 0x08
197#define SAM_STAT_INTERMEDIATE 0x10
198#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
199#define SAM_STAT_RESERVATION_CONFLICT 0x18
200#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
201#define SAM_STAT_TASK_SET_FULL 0x28
202#define SAM_STAT_ACA_ACTIVE 0x30
203#define SAM_STAT_TASK_ABORTED 0x40
204
205/*
206 * Status codes. These are deprecated as they are shifted 1 bit right
207 * from those found in the SCSI standards. This causes confusion for
208 * applications that are ported to several OSes. Prefer SAM Status codes
209 * above.
210 */
211
212#define GOOD 0x00
213#define CHECK_CONDITION 0x01
214#define CONDITION_GOOD 0x02
215#define BUSY 0x04
216#define INTERMEDIATE_GOOD 0x08
217#define INTERMEDIATE_C_GOOD 0x0a
218#define RESERVATION_CONFLICT 0x0c
219#define COMMAND_TERMINATED 0x11
220#define QUEUE_FULL 0x14
221#define ACA_ACTIVE 0x18
222#define TASK_ABORTED 0x20
223
224#define STATUS_MASK 0xfe
225
226/*
227 * SENSE KEYS
228 */
229
230#define NO_SENSE 0x00
231#define RECOVERED_ERROR 0x01
232#define NOT_READY 0x02
233#define MEDIUM_ERROR 0x03
234#define HARDWARE_ERROR 0x04
235#define ILLEGAL_REQUEST 0x05
236#define UNIT_ATTENTION 0x06
237#define DATA_PROTECT 0x07
238#define BLANK_CHECK 0x08
239#define COPY_ABORTED 0x0a
240#define ABORTED_COMMAND 0x0b
241#define VOLUME_OVERFLOW 0x0d
242#define MISCOMPARE 0x0e
243
244
245/*
246 * DEVICE TYPES
247 * Please keep them in 0x%02x format for $MODALIAS to work
248 */
249
250#define TYPE_DISK 0x00
251#define TYPE_TAPE 0x01
252#define TYPE_PRINTER 0x02
253#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
254#define TYPE_WORM 0x04 /* Treated as ROM by our system */
255#define TYPE_ROM 0x05
256#define TYPE_SCANNER 0x06
257#define TYPE_MOD 0x07 /* Magneto-optical disk -
258 * - treated as TYPE_DISK */
259#define TYPE_MEDIUM_CHANGER 0x08
260#define TYPE_COMM 0x09 /* Communications device */
261#define TYPE_RAID 0x0c
262#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
263#define TYPE_RBC 0x0e
264#define TYPE_OSD 0x11
265#define TYPE_ZBC 0x14
266#define TYPE_WLUN 0x1e /* well-known logical unit */
267#define TYPE_NO_LUN 0x7f
268
269/* SCSI protocols; these are taken from SPC-3 section 7.5 */
270enum scsi_protocol {
271 SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
272 SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
273 SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
274 SCSI_PROTOCOL_SBP = 3, /* firewire */
275 SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
276 SCSI_PROTOCOL_ISCSI = 5,
277 SCSI_PROTOCOL_SAS = 6,
278 SCSI_PROTOCOL_ADT = 7, /* Media Changers */
279 SCSI_PROTOCOL_ATA = 8,
280 SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
281};
282
283/*
284 * ScsiLun: 8 byte LUN.
285 */
286struct scsi_lun {
287 __u8 scsi_lun[8];
288};
289
290/* SPC asymmetric access states */
291#define SCSI_ACCESS_STATE_OPTIMAL 0x00
292#define SCSI_ACCESS_STATE_ACTIVE 0x01
293#define SCSI_ACCESS_STATE_STANDBY 0x02
294#define SCSI_ACCESS_STATE_UNAVAILABLE 0x03
295#define SCSI_ACCESS_STATE_LBA 0x04
296#define SCSI_ACCESS_STATE_OFFLINE 0x0e
297#define SCSI_ACCESS_STATE_TRANSITIONING 0x0f
298
299/* Values for REPORT TARGET GROUP STATES */
300#define SCSI_ACCESS_STATE_MASK 0x0f
301#define SCSI_ACCESS_STATE_PREFERRED 0x80
302
303/* Reporting options for REPORT ZONES */
304enum zbc_zone_reporting_options {
305 ZBC_ZONE_REPORTING_OPTION_ALL = 0x00,
306 ZBC_ZONE_REPORTING_OPTION_EMPTY = 0x01,
307 ZBC_ZONE_REPORTING_OPTION_IMPLICIT_OPEN = 0x02,
308 ZBC_ZONE_REPORTING_OPTION_EXPLICIT_OPEN = 0x03,
309 ZBC_ZONE_REPORTING_OPTION_CLOSED = 0x04,
310 ZBC_ZONE_REPORTING_OPTION_FULL = 0x05,
311 ZBC_ZONE_REPORTING_OPTION_READONLY = 0x06,
312 ZBC_ZONE_REPORTING_OPTION_OFFLINE = 0x07,
313 /* 0x08 to 0x0f are reserved */
314 ZBC_ZONE_REPORTING_OPTION_NEED_RESET_WP = 0x10,
315 ZBC_ZONE_REPORTING_OPTION_NON_SEQWRITE = 0x11,
316 /* 0x12 to 0x3e are reserved */
317 ZBC_ZONE_REPORTING_OPTION_NON_WP = 0x3f,
318};
319
320#define ZBC_REPORT_ZONE_PARTIAL 0x80
321
322/* Zone types of REPORT ZONES zone descriptors */
323enum zbc_zone_type {
324 ZBC_ZONE_TYPE_CONV = 0x1,
325 ZBC_ZONE_TYPE_SEQWRITE_REQ = 0x2,
326 ZBC_ZONE_TYPE_SEQWRITE_PREF = 0x3,
327 /* 0x4 to 0xf are reserved */
328};
329
330/* Zone conditions of REPORT ZONES zone descriptors */
331enum zbc_zone_cond {
332 ZBC_ZONE_COND_NO_WP = 0x0,
333 ZBC_ZONE_COND_EMPTY = 0x1,
334 ZBC_ZONE_COND_IMP_OPEN = 0x2,
335 ZBC_ZONE_COND_EXP_OPEN = 0x3,
336 ZBC_ZONE_COND_CLOSED = 0x4,
337 /* 0x5 to 0xc are reserved */
338 ZBC_ZONE_COND_READONLY = 0xd,
339 ZBC_ZONE_COND_FULL = 0xe,
340 ZBC_ZONE_COND_OFFLINE = 0xf,
341};
342
343#endif /* _SCSI_PROTO_H_ */