Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v4.14 352 lines 9.6 kB view raw
1/* 2 * Copyright (C) STMicroelectronics SA 2017 3 * 4 * Authors: Philippe Cornu <philippe.cornu@st.com> 5 * Yannick Fertre <yannick.fertre@st.com> 6 * 7 * License terms: GNU General Public License (GPL), version 2 8 */ 9 10#include <linux/clk.h> 11#include <linux/iopoll.h> 12#include <linux/module.h> 13#include <drm/drmP.h> 14#include <drm/drm_mipi_dsi.h> 15#include <drm/bridge/dw_mipi_dsi.h> 16#include <video/mipi_display.h> 17 18/* DSI wrapper register & bit definitions */ 19/* Note: registers are named as in the Reference Manual */ 20#define DSI_WCFGR 0x0400 /* Wrapper ConFiGuration Reg */ 21#define WCFGR_DSIM BIT(0) /* DSI Mode */ 22#define WCFGR_COLMUX GENMASK(3, 1) /* COLor MUltipleXing */ 23 24#define DSI_WCR 0x0404 /* Wrapper Control Reg */ 25#define WCR_DSIEN BIT(3) /* DSI ENable */ 26 27#define DSI_WISR 0x040C /* Wrapper Interrupt and Status Reg */ 28#define WISR_PLLLS BIT(8) /* PLL Lock Status */ 29#define WISR_RRS BIT(12) /* Regulator Ready Status */ 30 31#define DSI_WPCR0 0x0418 /* Wrapper Phy Conf Reg 0 */ 32#define WPCR0_UIX4 GENMASK(5, 0) /* Unit Interval X 4 */ 33#define WPCR0_TDDL BIT(16) /* Turn Disable Data Lanes */ 34 35#define DSI_WRPCR 0x0430 /* Wrapper Regulator & Pll Ctrl Reg */ 36#define WRPCR_PLLEN BIT(0) /* PLL ENable */ 37#define WRPCR_NDIV GENMASK(8, 2) /* pll loop DIVision Factor */ 38#define WRPCR_IDF GENMASK(14, 11) /* pll Input Division Factor */ 39#define WRPCR_ODF GENMASK(17, 16) /* pll Output Division Factor */ 40#define WRPCR_REGEN BIT(24) /* REGulator ENable */ 41#define WRPCR_BGREN BIT(28) /* BandGap Reference ENable */ 42#define IDF_MIN 1 43#define IDF_MAX 7 44#define NDIV_MIN 10 45#define NDIV_MAX 125 46#define ODF_MIN 1 47#define ODF_MAX 8 48 49/* dsi color format coding according to the datasheet */ 50enum dsi_color { 51 DSI_RGB565_CONF1, 52 DSI_RGB565_CONF2, 53 DSI_RGB565_CONF3, 54 DSI_RGB666_CONF1, 55 DSI_RGB666_CONF2, 56 DSI_RGB888, 57}; 58 59#define LANE_MIN_KBPS 31250 60#define LANE_MAX_KBPS 500000 61 62/* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */ 63#define SLEEP_US 1000 64#define TIMEOUT_US 200000 65 66struct dw_mipi_dsi_stm { 67 void __iomem *base; 68 struct clk *pllref_clk; 69}; 70 71static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val) 72{ 73 writel(val, dsi->base + reg); 74} 75 76static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg) 77{ 78 return readl(dsi->base + reg); 79} 80 81static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask) 82{ 83 dsi_write(dsi, reg, dsi_read(dsi, reg) | mask); 84} 85 86static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask) 87{ 88 dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask); 89} 90 91static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg, 92 u32 mask, u32 val) 93{ 94 dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val); 95} 96 97static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt) 98{ 99 switch (fmt) { 100 case MIPI_DSI_FMT_RGB888: 101 return DSI_RGB888; 102 case MIPI_DSI_FMT_RGB666: 103 return DSI_RGB666_CONF2; 104 case MIPI_DSI_FMT_RGB666_PACKED: 105 return DSI_RGB666_CONF1; 106 case MIPI_DSI_FMT_RGB565: 107 return DSI_RGB565_CONF1; 108 default: 109 DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n"); 110 } 111 return DSI_RGB888; 112} 113 114static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf) 115{ 116 /* prevent from division by 0 */ 117 if (idf * odf) 118 return DIV_ROUND_CLOSEST(clkin_khz * ndiv, idf * odf); 119 120 return 0; 121} 122 123static int dsi_pll_get_params(int clkin_khz, int clkout_khz, 124 int *idf, int *ndiv, int *odf) 125{ 126 int i, o, n, n_min, n_max; 127 int fvco_min, fvco_max, delta, best_delta; /* all in khz */ 128 129 /* Early checks preventing division by 0 & odd results */ 130 if ((clkin_khz <= 0) || (clkout_khz <= 0)) 131 return -EINVAL; 132 133 fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX; 134 fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN; 135 136 best_delta = 1000000; /* big started value (1000000khz) */ 137 138 for (i = IDF_MIN; i <= IDF_MAX; i++) { 139 /* Compute ndiv range according to Fvco */ 140 n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1; 141 n_max = (fvco_max * i) / (2 * clkin_khz); 142 143 /* No need to continue idf loop if we reach ndiv max */ 144 if (n_min >= NDIV_MAX) 145 break; 146 147 /* Clamp ndiv to valid values */ 148 if (n_min < NDIV_MIN) 149 n_min = NDIV_MIN; 150 if (n_max > NDIV_MAX) 151 n_max = NDIV_MAX; 152 153 for (o = ODF_MIN; o <= ODF_MAX; o *= 2) { 154 n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz); 155 /* Check ndiv according to vco range */ 156 if ((n < n_min) || (n > n_max)) 157 continue; 158 /* Check if new delta is better & saves parameters */ 159 delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) - 160 clkout_khz; 161 if (delta < 0) 162 delta = -delta; 163 if (delta < best_delta) { 164 *idf = i; 165 *ndiv = n; 166 *odf = o; 167 best_delta = delta; 168 } 169 /* fast return in case of "perfect result" */ 170 if (!delta) 171 return 0; 172 } 173 } 174 175 return 0; 176} 177 178static int dw_mipi_dsi_phy_init(void *priv_data) 179{ 180 struct dw_mipi_dsi_stm *dsi = priv_data; 181 u32 val; 182 int ret; 183 184 /* Enable the regulator */ 185 dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN); 186 ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS, 187 SLEEP_US, TIMEOUT_US); 188 if (ret) 189 DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n"); 190 191 /* Enable the DSI PLL & wait for its lock */ 192 dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN); 193 ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS, 194 SLEEP_US, TIMEOUT_US); 195 if (ret) 196 DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n"); 197 198 /* Enable the DSI wrapper */ 199 dsi_set(dsi, DSI_WCR, WCR_DSIEN); 200 201 return 0; 202} 203 204static int 205dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode, 206 unsigned long mode_flags, u32 lanes, u32 format, 207 unsigned int *lane_mbps) 208{ 209 struct dw_mipi_dsi_stm *dsi = priv_data; 210 unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz; 211 int ret, bpp; 212 u32 val; 213 214 pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000); 215 216 /* Compute requested pll out */ 217 bpp = mipi_dsi_pixel_format_to_bpp(format); 218 pll_out_khz = mode->clock * bpp / lanes; 219 /* Add 20% to pll out to be higher than pixel bw (burst mode only) */ 220 pll_out_khz = (pll_out_khz * 12) / 10; 221 if (pll_out_khz > LANE_MAX_KBPS) { 222 pll_out_khz = LANE_MAX_KBPS; 223 DRM_WARN("Warning max phy mbps is used\n"); 224 } 225 if (pll_out_khz < LANE_MIN_KBPS) { 226 pll_out_khz = LANE_MIN_KBPS; 227 DRM_WARN("Warning min phy mbps is used\n"); 228 } 229 230 /* Compute best pll parameters */ 231 idf = 0; 232 ndiv = 0; 233 odf = 0; 234 ret = dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf); 235 if (ret) 236 DRM_WARN("Warning dsi_pll_get_params(): bad params\n"); 237 238 /* Get the adjusted pll out value */ 239 pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf); 240 241 /* Set the PLL division factors */ 242 dsi_update_bits(dsi, DSI_WRPCR, WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF, 243 (ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16)); 244 245 /* Compute uix4 & set the bit period in high-speed mode */ 246 val = 4000000 / pll_out_khz; 247 dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val); 248 249 /* Select video mode by resetting DSIM bit */ 250 dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM); 251 252 /* Select the color coding */ 253 dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX, 254 dsi_color_from_mipi(format) << 1); 255 256 *lane_mbps = pll_out_khz / 1000; 257 258 DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", 259 pll_in_khz, pll_out_khz, *lane_mbps); 260 261 return 0; 262} 263 264static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = { 265 .init = dw_mipi_dsi_phy_init, 266 .get_lane_mbps = dw_mipi_dsi_get_lane_mbps, 267}; 268 269static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = { 270 .max_data_lanes = 2, 271 .phy_ops = &dw_mipi_dsi_stm_phy_ops, 272}; 273 274static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = { 275 { .compatible = "st,stm32-dsi", .data = &dw_mipi_dsi_stm_plat_data, }, 276 { }, 277}; 278MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids); 279 280static int dw_mipi_dsi_stm_probe(struct platform_device *pdev) 281{ 282 struct device *dev = &pdev->dev; 283 struct dw_mipi_dsi_stm *dsi; 284 struct resource *res; 285 int ret; 286 287 dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); 288 if (!dsi) 289 return -ENOMEM; 290 291 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 292 if (!res) { 293 DRM_ERROR("Unable to get resource\n"); 294 return -ENODEV; 295 } 296 297 dsi->base = devm_ioremap_resource(dev, res); 298 if (IS_ERR(dsi->base)) { 299 DRM_ERROR("Unable to get dsi registers\n"); 300 return PTR_ERR(dsi->base); 301 } 302 303 dsi->pllref_clk = devm_clk_get(dev, "ref"); 304 if (IS_ERR(dsi->pllref_clk)) { 305 ret = PTR_ERR(dsi->pllref_clk); 306 dev_err(dev, "Unable to get pll reference clock: %d\n", ret); 307 return ret; 308 } 309 310 ret = clk_prepare_enable(dsi->pllref_clk); 311 if (ret) { 312 dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__); 313 return ret; 314 } 315 316 dw_mipi_dsi_stm_plat_data.base = dsi->base; 317 dw_mipi_dsi_stm_plat_data.priv_data = dsi; 318 319 ret = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data); 320 if (ret) { 321 DRM_ERROR("Failed to initialize mipi dsi host\n"); 322 clk_disable_unprepare(dsi->pllref_clk); 323 } 324 325 return ret; 326} 327 328static int dw_mipi_dsi_stm_remove(struct platform_device *pdev) 329{ 330 struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data; 331 332 clk_disable_unprepare(dsi->pllref_clk); 333 dw_mipi_dsi_remove(pdev); 334 335 return 0; 336} 337 338static struct platform_driver dw_mipi_dsi_stm_driver = { 339 .probe = dw_mipi_dsi_stm_probe, 340 .remove = dw_mipi_dsi_stm_remove, 341 .driver = { 342 .of_match_table = dw_mipi_dsi_stm_dt_ids, 343 .name = "dw_mipi_dsi-stm", 344 }, 345}; 346 347module_platform_driver(dw_mipi_dsi_stm_driver); 348 349MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>"); 350MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>"); 351MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver"); 352MODULE_LICENSE("GPL v2");