tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#
2# Broadcom device configuration
3#
4
5config NET_VENDOR_BROADCOM
6 bool "Broadcom devices"
7 default y
8 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
9 SIBYTE_SB1xxx_SOC
10 ---help---
11 If you have a network (Ethernet) chipset belonging to this class,
12 say Y.
13
14 Note that the answer to this question does not directly affect
15 the kernel: saying N will just case the configurator to skip all
16 the questions regarding AMD chipsets. If you say Y, you will be asked
17 for your specific chipset/driver in the following questions.
18
19if NET_VENDOR_BROADCOM
20
21config B44
22 tristate "Broadcom 440x/47xx ethernet support"
23 depends on SSB_POSSIBLE && HAS_DMA
24 select SSB
25 select MII
26 select PHYLIB
27 ---help---
28 If you have a network (Ethernet) controller of this type, say Y
29 or M here.
30
31 To compile this driver as a module, choose M here. The module
32 will be called b44.
33
34# Auto-select SSB PCI-HOST support, if possible
35config B44_PCI_AUTOSELECT
36 bool
37 depends on B44 && SSB_PCIHOST_POSSIBLE
38 select SSB_PCIHOST
39 default y
40
41# Auto-select SSB PCICORE driver, if possible
42config B44_PCICORE_AUTOSELECT
43 bool
44 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
45 select SSB_DRIVER_PCICORE
46 default y
47
48config B44_PCI
49 bool
50 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
51 default y
52
53config BCM63XX_ENET
54 tristate "Broadcom 63xx internal mac support"
55 depends on BCM63XX
56 select MII
57 select PHYLIB
58 help
59 This driver supports the ethernet MACs in the Broadcom 63xx
60 MIPS chipset family (BCM63XX).
61
62config BCMGENET
63 tristate "Broadcom GENET internal MAC support"
64 depends on OF && HAS_IOMEM
65 select MII
66 select PHYLIB
67 select FIXED_PHY
68 select BCM7XXX_PHY
69 select MDIO_BCM_UNIMAC
70 help
71 This driver supports the built-in Ethernet MACs found in the
72 Broadcom BCM7xxx Set Top Box family chipset.
73
74config BNX2
75 tristate "QLogic bnx2 support"
76 depends on PCI
77 select CRC32
78 select FW_LOADER
79 ---help---
80 This driver supports QLogic bnx2 gigabit Ethernet cards.
81
82 To compile this driver as a module, choose M here: the module
83 will be called bnx2. This is recommended.
84
85config CNIC
86 tristate "QLogic CNIC support"
87 depends on PCI && (IPV6 || IPV6=n)
88 select BNX2
89 select UIO
90 ---help---
91 This driver supports offload features of QLogic bnx2 gigabit
92 Ethernet cards.
93
94 To compile this driver as a module, choose M here: the module
95 will be called cnic. This is recommended.
96
97config SB1250_MAC
98 tristate "SB1250 Gigabit Ethernet support"
99 depends on SIBYTE_SB1xxx_SOC
100 select PHYLIB
101 ---help---
102 This driver supports Gigabit Ethernet interfaces based on the
103 Broadcom SiByte family of System-On-a-Chip parts. They include
104 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
105 and BCM1480 chips.
106
107 To compile this driver as a module, choose M here: the module
108 will be called sb1250-mac.
109
110config TIGON3
111 tristate "Broadcom Tigon3 support"
112 depends on PCI
113 select PHYLIB
114 imply PTP_1588_CLOCK
115 ---help---
116 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
117
118 To compile this driver as a module, choose M here: the module
119 will be called tg3. This is recommended.
120
121config TIGON3_HWMON
122 bool "Broadcom Tigon3 HWMON support"
123 default y
124 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
125 ---help---
126 Say Y if you want to expose the thermal sensor on Tigon3 devices.
127
128config BNX2X
129 tristate "Broadcom NetXtremeII 10Gb support"
130 depends on PCI
131 imply PTP_1588_CLOCK
132 select FW_LOADER
133 select ZLIB_INFLATE
134 select LIBCRC32C
135 select MDIO
136 ---help---
137 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
138 To compile this driver as a module, choose M here: the module
139 will be called bnx2x. This is recommended.
140
141config BNX2X_SRIOV
142 bool "Broadcom 578xx and 57712 SR-IOV support"
143 depends on BNX2X && PCI_IOV
144 default y
145 ---help---
146 This configuration parameter enables Single Root Input Output
147 Virtualization support in the 578xx and 57712 products. This
148 allows for virtual function acceleration in virtual environments.
149
150config BGMAC
151 tristate
152 help
153 This enables the integrated ethernet controller support for many
154 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
155 needs to be enabled to select this.
156
157config BGMAC_BCMA
158 tristate "Broadcom iProc GBit BCMA support"
159 depends on BCMA && BCMA_HOST_SOC
160 depends on HAS_DMA
161 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
162 select BGMAC
163 select PHYLIB
164 select FIXED_PHY
165 ---help---
166 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
167 They can be found on BCM47xx SoCs and provide gigabit ethernet.
168 In case of using this driver on BCM4706 it's also requires to enable
169 BCMA_DRIVER_GMAC_CMN to make it work.
170
171config BGMAC_PLATFORM
172 tristate "Broadcom iProc GBit platform support"
173 depends on HAS_DMA
174 depends on ARCH_BCM_IPROC || COMPILE_TEST
175 depends on OF
176 select BGMAC
177 select PHYLIB
178 select FIXED_PHY
179 default ARCH_BCM_IPROC
180 ---help---
181 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
182 controller through the generic platform interface
183
184config SYSTEMPORT
185 tristate "Broadcom SYSTEMPORT internal MAC support"
186 depends on OF
187 select MII
188 select PHYLIB
189 select FIXED_PHY
190 help
191 This driver supports the built-in Ethernet MACs found in the
192 Broadcom BCM7xxx Set Top Box family chipset using an internal
193 Ethernet switch.
194
195config BNXT
196 tristate "Broadcom NetXtreme-C/E support"
197 depends on PCI
198 depends on MAY_USE_DEVLINK
199 select FW_LOADER
200 select LIBCRC32C
201 ---help---
202 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
203 Ethernet cards. To compile this driver as a module, choose M here:
204 the module will be called bnxt_en. This is recommended.
205
206config BNXT_SRIOV
207 bool "Broadcom NetXtreme-C/E SR-IOV support"
208 depends on BNXT && PCI_IOV
209 default y
210 ---help---
211 This configuration parameter enables Single Root Input Output
212 Virtualization support in the NetXtreme-C/E products. This
213 allows for virtual function acceleration in virtual environments.
214
215config BNXT_FLOWER_OFFLOAD
216 bool "TC Flower offload support for NetXtreme-C/E"
217 depends on BNXT
218 default y
219 ---help---
220 This configuration parameter enables TC Flower packet classifier
221 offload for eswitch. This option enables SR-IOV switchdev eswitch
222 offload.
223
224config BNXT_DCB
225 bool "Data Center Bridging (DCB) Support"
226 default n
227 depends on BNXT && DCB
228 ---help---
229 Say Y here if you want to use Data Center Bridging (DCB) in the
230 driver.
231
232 If unsure, say N.
233
234endif # NET_VENDOR_BROADCOM