Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * Amlogic SD/eMMC driver for the GX/S905 family SoCs
3 *
4 * Copyright (c) 2016 BayLibre, SAS.
5 * Author: Kevin Hilman <khilman@baylibre.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
18 * The full GNU General Public License is included in this distribution
19 * in the file called COPYING.
20 */
21#include <linux/kernel.h>
22#include <linux/module.h>
23#include <linux/init.h>
24#include <linux/device.h>
25#include <linux/of_device.h>
26#include <linux/platform_device.h>
27#include <linux/ioport.h>
28#include <linux/spinlock.h>
29#include <linux/dma-mapping.h>
30#include <linux/mmc/host.h>
31#include <linux/mmc/mmc.h>
32#include <linux/mmc/sdio.h>
33#include <linux/mmc/slot-gpio.h>
34#include <linux/io.h>
35#include <linux/clk.h>
36#include <linux/clk-provider.h>
37#include <linux/regulator/consumer.h>
38#include <linux/interrupt.h>
39#include <linux/bitfield.h>
40
41#define DRIVER_NAME "meson-gx-mmc"
42
43#define SD_EMMC_CLOCK 0x0
44#define CLK_DIV_MASK GENMASK(5, 0)
45#define CLK_SRC_MASK GENMASK(7, 6)
46#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
47#define CLK_TX_PHASE_MASK GENMASK(11, 10)
48#define CLK_RX_PHASE_MASK GENMASK(13, 12)
49#define CLK_TX_DELAY_MASK GENMASK(19, 16)
50#define CLK_RX_DELAY_MASK GENMASK(23, 20)
51#define CLK_DELAY_STEP_PS 200
52#define CLK_PHASE_STEP 30
53#define CLK_PHASE_POINT_NUM (360 / CLK_PHASE_STEP)
54#define CLK_ALWAYS_ON BIT(24)
55
56#define SD_EMMC_DELAY 0x4
57#define SD_EMMC_ADJUST 0x8
58#define SD_EMMC_CALOUT 0x10
59#define SD_EMMC_START 0x40
60#define START_DESC_INIT BIT(0)
61#define START_DESC_BUSY BIT(1)
62#define START_DESC_ADDR_MASK GENMASK(31, 2)
63
64#define SD_EMMC_CFG 0x44
65#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
66#define CFG_BUS_WIDTH_1 0x0
67#define CFG_BUS_WIDTH_4 0x1
68#define CFG_BUS_WIDTH_8 0x2
69#define CFG_DDR BIT(2)
70#define CFG_BLK_LEN_MASK GENMASK(7, 4)
71#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
72#define CFG_RC_CC_MASK GENMASK(15, 12)
73#define CFG_STOP_CLOCK BIT(22)
74#define CFG_CLK_ALWAYS_ON BIT(18)
75#define CFG_CHK_DS BIT(20)
76#define CFG_AUTO_CLK BIT(23)
77
78#define SD_EMMC_STATUS 0x48
79#define STATUS_BUSY BIT(31)
80#define STATUS_DATI GENMASK(23, 16)
81
82#define SD_EMMC_IRQ_EN 0x4c
83#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
84#define IRQ_TXD_ERR BIT(8)
85#define IRQ_DESC_ERR BIT(9)
86#define IRQ_RESP_ERR BIT(10)
87#define IRQ_CRC_ERR \
88 (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
89#define IRQ_RESP_TIMEOUT BIT(11)
90#define IRQ_DESC_TIMEOUT BIT(12)
91#define IRQ_TIMEOUTS \
92 (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
93#define IRQ_END_OF_CHAIN BIT(13)
94#define IRQ_RESP_STATUS BIT(14)
95#define IRQ_SDIO BIT(15)
96#define IRQ_EN_MASK \
97 (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN | IRQ_RESP_STATUS |\
98 IRQ_SDIO)
99
100#define SD_EMMC_CMD_CFG 0x50
101#define SD_EMMC_CMD_ARG 0x54
102#define SD_EMMC_CMD_DAT 0x58
103#define SD_EMMC_CMD_RSP 0x5c
104#define SD_EMMC_CMD_RSP1 0x60
105#define SD_EMMC_CMD_RSP2 0x64
106#define SD_EMMC_CMD_RSP3 0x68
107
108#define SD_EMMC_RXD 0x94
109#define SD_EMMC_TXD 0x94
110#define SD_EMMC_LAST_REG SD_EMMC_TXD
111
112#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
113#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
114#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
115#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
116#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
117#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
118
119#define SD_EMMC_PRE_REQ_DONE BIT(0)
120#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
121
122#define MUX_CLK_NUM_PARENTS 2
123
124struct sd_emmc_desc {
125 u32 cmd_cfg;
126 u32 cmd_arg;
127 u32 cmd_data;
128 u32 cmd_resp;
129};
130
131struct meson_host {
132 struct device *dev;
133 struct mmc_host *mmc;
134 struct mmc_command *cmd;
135
136 spinlock_t lock;
137 void __iomem *regs;
138 struct clk *core_clk;
139 struct clk *mmc_clk;
140 struct clk *rx_clk;
141 struct clk *tx_clk;
142 unsigned long req_rate;
143
144 struct pinctrl *pinctrl;
145 struct pinctrl_state *pins_default;
146 struct pinctrl_state *pins_clk_gate;
147
148 unsigned int bounce_buf_size;
149 void *bounce_buf;
150 dma_addr_t bounce_dma_addr;
151 struct sd_emmc_desc *descs;
152 dma_addr_t descs_dma_addr;
153
154 bool vqmmc_enabled;
155};
156
157#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
158#define CMD_CFG_BLOCK_MODE BIT(9)
159#define CMD_CFG_R1B BIT(10)
160#define CMD_CFG_END_OF_CHAIN BIT(11)
161#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
162#define CMD_CFG_NO_RESP BIT(16)
163#define CMD_CFG_NO_CMD BIT(17)
164#define CMD_CFG_DATA_IO BIT(18)
165#define CMD_CFG_DATA_WR BIT(19)
166#define CMD_CFG_RESP_NOCRC BIT(20)
167#define CMD_CFG_RESP_128 BIT(21)
168#define CMD_CFG_RESP_NUM BIT(22)
169#define CMD_CFG_DATA_NUM BIT(23)
170#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
171#define CMD_CFG_ERROR BIT(30)
172#define CMD_CFG_OWNER BIT(31)
173
174#define CMD_DATA_MASK GENMASK(31, 2)
175#define CMD_DATA_BIG_ENDIAN BIT(1)
176#define CMD_DATA_SRAM BIT(0)
177#define CMD_RESP_MASK GENMASK(31, 1)
178#define CMD_RESP_SRAM BIT(0)
179
180struct meson_mmc_phase {
181 struct clk_hw hw;
182 void __iomem *reg;
183 unsigned long phase_mask;
184 unsigned long delay_mask;
185 unsigned int delay_step_ps;
186};
187
188#define to_meson_mmc_phase(_hw) container_of(_hw, struct meson_mmc_phase, hw)
189
190static int meson_mmc_clk_get_phase(struct clk_hw *hw)
191{
192 struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw);
193 unsigned int phase_num = 1 << hweight_long(mmc->phase_mask);
194 unsigned long period_ps, p, d;
195 int degrees;
196 u32 val;
197
198 val = readl(mmc->reg);
199 p = (val & mmc->phase_mask) >> __ffs(mmc->phase_mask);
200 degrees = p * 360 / phase_num;
201
202 if (mmc->delay_mask) {
203 period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000,
204 clk_get_rate(hw->clk));
205 d = (val & mmc->delay_mask) >> __ffs(mmc->delay_mask);
206 degrees += d * mmc->delay_step_ps * 360 / period_ps;
207 degrees %= 360;
208 }
209
210 return degrees;
211}
212
213static void meson_mmc_apply_phase_delay(struct meson_mmc_phase *mmc,
214 unsigned int phase,
215 unsigned int delay)
216{
217 u32 val;
218
219 val = readl(mmc->reg);
220 val &= ~mmc->phase_mask;
221 val |= phase << __ffs(mmc->phase_mask);
222
223 if (mmc->delay_mask) {
224 val &= ~mmc->delay_mask;
225 val |= delay << __ffs(mmc->delay_mask);
226 }
227
228 writel(val, mmc->reg);
229}
230
231static int meson_mmc_clk_set_phase(struct clk_hw *hw, int degrees)
232{
233 struct meson_mmc_phase *mmc = to_meson_mmc_phase(hw);
234 unsigned int phase_num = 1 << hweight_long(mmc->phase_mask);
235 unsigned long period_ps, d = 0, r;
236 uint64_t p;
237
238 p = degrees % 360;
239
240 if (!mmc->delay_mask) {
241 p = DIV_ROUND_CLOSEST_ULL(p, 360 / phase_num);
242 } else {
243 period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000,
244 clk_get_rate(hw->clk));
245
246 /* First compute the phase index (p), the remainder (r) is the
247 * part we'll try to acheive using the delays (d).
248 */
249 r = do_div(p, 360 / phase_num);
250 d = DIV_ROUND_CLOSEST(r * period_ps,
251 360 * mmc->delay_step_ps);
252 d = min(d, mmc->delay_mask >> __ffs(mmc->delay_mask));
253 }
254
255 meson_mmc_apply_phase_delay(mmc, p, d);
256 return 0;
257}
258
259static const struct clk_ops meson_mmc_clk_phase_ops = {
260 .get_phase = meson_mmc_clk_get_phase,
261 .set_phase = meson_mmc_clk_set_phase,
262};
263
264static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
265{
266 unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
267
268 if (!timeout)
269 return SD_EMMC_CMD_TIMEOUT_DATA;
270
271 timeout = roundup_pow_of_two(timeout);
272
273 return min(timeout, 32768U); /* max. 2^15 ms */
274}
275
276static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
277{
278 if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
279 return cmd->mrq->cmd;
280 else if (mmc_op_multi(cmd->opcode) &&
281 (!cmd->mrq->sbc || cmd->error || cmd->data->error))
282 return cmd->mrq->stop;
283 else
284 return NULL;
285}
286
287static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
288 struct mmc_request *mrq)
289{
290 struct mmc_data *data = mrq->data;
291 struct scatterlist *sg;
292 int i;
293 bool use_desc_chain_mode = true;
294
295 /*
296 * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been
297 * reported. For some strange reason this occurs in descriptor
298 * chain mode only. So let's fall back to bounce buffer mode
299 * for command SD_IO_RW_EXTENDED.
300 */
301 if (mrq->cmd->opcode == SD_IO_RW_EXTENDED)
302 return;
303
304 for_each_sg(data->sg, sg, data->sg_len, i)
305 /* check for 8 byte alignment */
306 if (sg->offset & 7) {
307 WARN_ONCE(1, "unaligned scatterlist buffer\n");
308 use_desc_chain_mode = false;
309 break;
310 }
311
312 if (use_desc_chain_mode)
313 data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
314}
315
316static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
317{
318 return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
319}
320
321static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
322{
323 return data && data->flags & MMC_DATA_READ &&
324 !meson_mmc_desc_chain_mode(data);
325}
326
327static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
328{
329 struct mmc_data *data = mrq->data;
330
331 if (!data)
332 return;
333
334 meson_mmc_get_transfer_mode(mmc, mrq);
335 data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
336
337 if (!meson_mmc_desc_chain_mode(data))
338 return;
339
340 data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
341 mmc_get_dma_dir(data));
342 if (!data->sg_count)
343 dev_err(mmc_dev(mmc), "dma_map_sg failed");
344}
345
346static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
347 int err)
348{
349 struct mmc_data *data = mrq->data;
350
351 if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
352 dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
353 mmc_get_dma_dir(data));
354}
355
356static bool meson_mmc_timing_is_ddr(struct mmc_ios *ios)
357{
358 if (ios->timing == MMC_TIMING_MMC_DDR52 ||
359 ios->timing == MMC_TIMING_UHS_DDR50 ||
360 ios->timing == MMC_TIMING_MMC_HS400)
361 return true;
362
363 return false;
364}
365
366/*
367 * Gating the clock on this controller is tricky. It seems the mmc clock
368 * is also used by the controller. It may crash during some operation if the
369 * clock is stopped. The safest thing to do, whenever possible, is to keep
370 * clock running at stop it at the pad using the pinmux.
371 */
372static void meson_mmc_clk_gate(struct meson_host *host)
373{
374 u32 cfg;
375
376 if (host->pins_clk_gate) {
377 pinctrl_select_state(host->pinctrl, host->pins_clk_gate);
378 } else {
379 /*
380 * If the pinmux is not provided - default to the classic and
381 * unsafe method
382 */
383 cfg = readl(host->regs + SD_EMMC_CFG);
384 cfg |= CFG_STOP_CLOCK;
385 writel(cfg, host->regs + SD_EMMC_CFG);
386 }
387}
388
389static void meson_mmc_clk_ungate(struct meson_host *host)
390{
391 u32 cfg;
392
393 if (host->pins_clk_gate)
394 pinctrl_select_state(host->pinctrl, host->pins_default);
395
396 /* Make sure the clock is not stopped in the controller */
397 cfg = readl(host->regs + SD_EMMC_CFG);
398 cfg &= ~CFG_STOP_CLOCK;
399 writel(cfg, host->regs + SD_EMMC_CFG);
400}
401
402static int meson_mmc_clk_set(struct meson_host *host, struct mmc_ios *ios)
403{
404 struct mmc_host *mmc = host->mmc;
405 unsigned long rate = ios->clock;
406 int ret;
407 u32 cfg;
408
409 /* DDR modes require higher module clock */
410 if (meson_mmc_timing_is_ddr(ios))
411 rate <<= 1;
412
413 /* Same request - bail-out */
414 if (host->req_rate == rate)
415 return 0;
416
417 /* stop clock */
418 meson_mmc_clk_gate(host);
419 host->req_rate = 0;
420
421 if (!rate) {
422 mmc->actual_clock = 0;
423 /* return with clock being stopped */
424 return 0;
425 }
426
427 /* Stop the clock during rate change to avoid glitches */
428 cfg = readl(host->regs + SD_EMMC_CFG);
429 cfg |= CFG_STOP_CLOCK;
430 writel(cfg, host->regs + SD_EMMC_CFG);
431
432 ret = clk_set_rate(host->mmc_clk, rate);
433 if (ret) {
434 dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
435 rate, ret);
436 return ret;
437 }
438
439 host->req_rate = rate;
440 mmc->actual_clock = clk_get_rate(host->mmc_clk);
441
442 /* We should report the real output frequency of the controller */
443 if (meson_mmc_timing_is_ddr(ios))
444 mmc->actual_clock >>= 1;
445
446 dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
447 if (ios->clock != mmc->actual_clock)
448 dev_dbg(host->dev, "requested rate was %u\n", ios->clock);
449
450 /* (re)start clock */
451 meson_mmc_clk_ungate(host);
452
453 return 0;
454}
455
456/*
457 * The SD/eMMC IP block has an internal mux and divider used for
458 * generating the MMC clock. Use the clock framework to create and
459 * manage these clocks.
460 */
461static int meson_mmc_clk_init(struct meson_host *host)
462{
463 struct clk_init_data init;
464 struct clk_mux *mux;
465 struct clk_divider *div;
466 struct meson_mmc_phase *core, *tx, *rx;
467 struct clk *clk;
468 char clk_name[32];
469 int i, ret = 0;
470 const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
471 const char *clk_parent[1];
472 u32 clk_reg;
473
474 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
475 clk_reg = 0;
476 clk_reg |= CLK_ALWAYS_ON;
477 clk_reg |= CLK_DIV_MASK;
478 writel(clk_reg, host->regs + SD_EMMC_CLOCK);
479
480 /* get the mux parents */
481 for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
482 struct clk *clk;
483 char name[16];
484
485 snprintf(name, sizeof(name), "clkin%d", i);
486 clk = devm_clk_get(host->dev, name);
487 if (IS_ERR(clk)) {
488 if (clk != ERR_PTR(-EPROBE_DEFER))
489 dev_err(host->dev, "Missing clock %s\n", name);
490 return PTR_ERR(clk);
491 }
492
493 mux_parent_names[i] = __clk_get_name(clk);
494 }
495
496 /* create the mux */
497 mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
498 if (!mux)
499 return -ENOMEM;
500
501 snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
502 init.name = clk_name;
503 init.ops = &clk_mux_ops;
504 init.flags = 0;
505 init.parent_names = mux_parent_names;
506 init.num_parents = MUX_CLK_NUM_PARENTS;
507
508 mux->reg = host->regs + SD_EMMC_CLOCK;
509 mux->shift = __ffs(CLK_SRC_MASK);
510 mux->mask = CLK_SRC_MASK >> mux->shift;
511 mux->hw.init = &init;
512
513 clk = devm_clk_register(host->dev, &mux->hw);
514 if (WARN_ON(IS_ERR(clk)))
515 return PTR_ERR(clk);
516
517 /* create the divider */
518 div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
519 if (!div)
520 return -ENOMEM;
521
522 snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
523 init.name = clk_name;
524 init.ops = &clk_divider_ops;
525 init.flags = CLK_SET_RATE_PARENT;
526 clk_parent[0] = __clk_get_name(clk);
527 init.parent_names = clk_parent;
528 init.num_parents = 1;
529
530 div->reg = host->regs + SD_EMMC_CLOCK;
531 div->shift = __ffs(CLK_DIV_MASK);
532 div->width = __builtin_popcountl(CLK_DIV_MASK);
533 div->hw.init = &init;
534 div->flags = (CLK_DIVIDER_ONE_BASED |
535 CLK_DIVIDER_ROUND_CLOSEST);
536
537 clk = devm_clk_register(host->dev, &div->hw);
538 if (WARN_ON(IS_ERR(clk)))
539 return PTR_ERR(clk);
540
541 /* create the mmc core clock */
542 core = devm_kzalloc(host->dev, sizeof(*core), GFP_KERNEL);
543 if (!core)
544 return -ENOMEM;
545
546 snprintf(clk_name, sizeof(clk_name), "%s#core", dev_name(host->dev));
547 init.name = clk_name;
548 init.ops = &meson_mmc_clk_phase_ops;
549 init.flags = CLK_SET_RATE_PARENT;
550 clk_parent[0] = __clk_get_name(clk);
551 init.parent_names = clk_parent;
552 init.num_parents = 1;
553
554 core->reg = host->regs + SD_EMMC_CLOCK;
555 core->phase_mask = CLK_CORE_PHASE_MASK;
556 core->hw.init = &init;
557
558 host->mmc_clk = devm_clk_register(host->dev, &core->hw);
559 if (WARN_ON(PTR_ERR_OR_ZERO(host->mmc_clk)))
560 return PTR_ERR(host->mmc_clk);
561
562 /* create the mmc tx clock */
563 tx = devm_kzalloc(host->dev, sizeof(*tx), GFP_KERNEL);
564 if (!tx)
565 return -ENOMEM;
566
567 snprintf(clk_name, sizeof(clk_name), "%s#tx", dev_name(host->dev));
568 init.name = clk_name;
569 init.ops = &meson_mmc_clk_phase_ops;
570 init.flags = 0;
571 clk_parent[0] = __clk_get_name(host->mmc_clk);
572 init.parent_names = clk_parent;
573 init.num_parents = 1;
574
575 tx->reg = host->regs + SD_EMMC_CLOCK;
576 tx->phase_mask = CLK_TX_PHASE_MASK;
577 tx->delay_mask = CLK_TX_DELAY_MASK;
578 tx->delay_step_ps = CLK_DELAY_STEP_PS;
579 tx->hw.init = &init;
580
581 host->tx_clk = devm_clk_register(host->dev, &tx->hw);
582 if (WARN_ON(PTR_ERR_OR_ZERO(host->tx_clk)))
583 return PTR_ERR(host->tx_clk);
584
585 /* create the mmc rx clock */
586 rx = devm_kzalloc(host->dev, sizeof(*rx), GFP_KERNEL);
587 if (!rx)
588 return -ENOMEM;
589
590 snprintf(clk_name, sizeof(clk_name), "%s#rx", dev_name(host->dev));
591 init.name = clk_name;
592 init.ops = &meson_mmc_clk_phase_ops;
593 init.flags = 0;
594 clk_parent[0] = __clk_get_name(host->mmc_clk);
595 init.parent_names = clk_parent;
596 init.num_parents = 1;
597
598 rx->reg = host->regs + SD_EMMC_CLOCK;
599 rx->phase_mask = CLK_RX_PHASE_MASK;
600 rx->delay_mask = CLK_RX_DELAY_MASK;
601 rx->delay_step_ps = CLK_DELAY_STEP_PS;
602 rx->hw.init = &init;
603
604 host->rx_clk = devm_clk_register(host->dev, &rx->hw);
605 if (WARN_ON(PTR_ERR_OR_ZERO(host->rx_clk)))
606 return PTR_ERR(host->rx_clk);
607
608 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
609 host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
610 ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
611 if (ret)
612 return ret;
613
614 /*
615 * Set phases : These values are mostly the datasheet recommended ones
616 * except for the Tx phase. Datasheet recommends 180 but some cards
617 * fail at initialisation with it. 270 works just fine, it fixes these
618 * initialisation issues and enable eMMC DDR52 mode.
619 */
620 clk_set_phase(host->mmc_clk, 180);
621 clk_set_phase(host->tx_clk, 270);
622 clk_set_phase(host->rx_clk, 0);
623
624 return clk_prepare_enable(host->mmc_clk);
625}
626
627static void meson_mmc_shift_map(unsigned long *map, unsigned long shift)
628{
629 DECLARE_BITMAP(left, CLK_PHASE_POINT_NUM);
630 DECLARE_BITMAP(right, CLK_PHASE_POINT_NUM);
631
632 /*
633 * shift the bitmap right and reintroduce the dropped bits on the left
634 * of the bitmap
635 */
636 bitmap_shift_right(right, map, shift, CLK_PHASE_POINT_NUM);
637 bitmap_shift_left(left, map, CLK_PHASE_POINT_NUM - shift,
638 CLK_PHASE_POINT_NUM);
639 bitmap_or(map, left, right, CLK_PHASE_POINT_NUM);
640}
641
642static void meson_mmc_find_next_region(unsigned long *map,
643 unsigned long *start,
644 unsigned long *stop)
645{
646 *start = find_next_bit(map, CLK_PHASE_POINT_NUM, *start);
647 *stop = find_next_zero_bit(map, CLK_PHASE_POINT_NUM, *start);
648}
649
650static int meson_mmc_find_tuning_point(unsigned long *test)
651{
652 unsigned long shift, stop, offset = 0, start = 0, size = 0;
653
654 /* Get the all good/all bad situation out the way */
655 if (bitmap_full(test, CLK_PHASE_POINT_NUM))
656 return 0; /* All points are good so point 0 will do */
657 else if (bitmap_empty(test, CLK_PHASE_POINT_NUM))
658 return -EIO; /* No successful tuning point */
659
660 /*
661 * Now we know there is a least one region find. Make sure it does
662 * not wrap by the shifting the bitmap if necessary
663 */
664 shift = find_first_zero_bit(test, CLK_PHASE_POINT_NUM);
665 if (shift != 0)
666 meson_mmc_shift_map(test, shift);
667
668 while (start < CLK_PHASE_POINT_NUM) {
669 meson_mmc_find_next_region(test, &start, &stop);
670
671 if ((stop - start) > size) {
672 offset = start;
673 size = stop - start;
674 }
675
676 start = stop;
677 }
678
679 /* Get the center point of the region */
680 offset += (size / 2);
681
682 /* Shift the result back */
683 offset = (offset + shift) % CLK_PHASE_POINT_NUM;
684
685 return offset;
686}
687
688static int meson_mmc_clk_phase_tuning(struct mmc_host *mmc, u32 opcode,
689 struct clk *clk)
690{
691 int point, ret;
692 DECLARE_BITMAP(test, CLK_PHASE_POINT_NUM);
693
694 dev_dbg(mmc_dev(mmc), "%s phase/delay tunning...\n",
695 __clk_get_name(clk));
696 bitmap_zero(test, CLK_PHASE_POINT_NUM);
697
698 /* Explore tuning points */
699 for (point = 0; point < CLK_PHASE_POINT_NUM; point++) {
700 clk_set_phase(clk, point * CLK_PHASE_STEP);
701 ret = mmc_send_tuning(mmc, opcode, NULL);
702 if (!ret)
703 set_bit(point, test);
704 }
705
706 /* Find the optimal tuning point and apply it */
707 point = meson_mmc_find_tuning_point(test);
708 if (point < 0)
709 return point; /* tuning failed */
710
711 clk_set_phase(clk, point * CLK_PHASE_STEP);
712 dev_dbg(mmc_dev(mmc), "success with phase: %d\n",
713 clk_get_phase(clk));
714 return 0;
715}
716
717static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
718{
719 struct meson_host *host = mmc_priv(mmc);
720
721 return meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk);
722}
723
724static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
725{
726 struct meson_host *host = mmc_priv(mmc);
727 u32 bus_width, val;
728 int err;
729
730 /*
731 * GPIO regulator, only controls switching between 1v8 and
732 * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
733 */
734 switch (ios->power_mode) {
735 case MMC_POWER_OFF:
736 if (!IS_ERR(mmc->supply.vmmc))
737 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
738
739 if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
740 regulator_disable(mmc->supply.vqmmc);
741 host->vqmmc_enabled = false;
742 }
743
744 break;
745
746 case MMC_POWER_UP:
747 if (!IS_ERR(mmc->supply.vmmc))
748 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
749 break;
750
751 case MMC_POWER_ON:
752 if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
753 int ret = regulator_enable(mmc->supply.vqmmc);
754
755 if (ret < 0)
756 dev_err(host->dev,
757 "failed to enable vqmmc regulator\n");
758 else
759 host->vqmmc_enabled = true;
760 }
761
762 /* Reset rx phase */
763 clk_set_phase(host->rx_clk, 0);
764 break;
765 }
766
767 /* Bus width */
768 switch (ios->bus_width) {
769 case MMC_BUS_WIDTH_1:
770 bus_width = CFG_BUS_WIDTH_1;
771 break;
772 case MMC_BUS_WIDTH_4:
773 bus_width = CFG_BUS_WIDTH_4;
774 break;
775 case MMC_BUS_WIDTH_8:
776 bus_width = CFG_BUS_WIDTH_8;
777 break;
778 default:
779 dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
780 ios->bus_width);
781 bus_width = CFG_BUS_WIDTH_4;
782 }
783
784 val = readl(host->regs + SD_EMMC_CFG);
785 val &= ~CFG_BUS_WIDTH_MASK;
786 val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
787
788 val &= ~CFG_DDR;
789 if (meson_mmc_timing_is_ddr(ios))
790 val |= CFG_DDR;
791
792 val &= ~CFG_CHK_DS;
793 if (ios->timing == MMC_TIMING_MMC_HS400)
794 val |= CFG_CHK_DS;
795
796 err = meson_mmc_clk_set(host, ios);
797 if (err)
798 dev_err(host->dev, "Failed to set clock: %d\n,", err);
799
800 writel(val, host->regs + SD_EMMC_CFG);
801 dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val);
802}
803
804static void meson_mmc_request_done(struct mmc_host *mmc,
805 struct mmc_request *mrq)
806{
807 struct meson_host *host = mmc_priv(mmc);
808
809 host->cmd = NULL;
810 mmc_request_done(host->mmc, mrq);
811}
812
813static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
814{
815 struct meson_host *host = mmc_priv(mmc);
816 u32 cfg, blksz_old;
817
818 cfg = readl(host->regs + SD_EMMC_CFG);
819 blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
820
821 if (!is_power_of_2(blksz))
822 dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
823
824 blksz = ilog2(blksz);
825
826 /* check if block-size matches, if not update */
827 if (blksz == blksz_old)
828 return;
829
830 dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
831 blksz_old, blksz);
832
833 cfg &= ~CFG_BLK_LEN_MASK;
834 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
835 writel(cfg, host->regs + SD_EMMC_CFG);
836}
837
838static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
839{
840 if (cmd->flags & MMC_RSP_PRESENT) {
841 if (cmd->flags & MMC_RSP_136)
842 *cmd_cfg |= CMD_CFG_RESP_128;
843 *cmd_cfg |= CMD_CFG_RESP_NUM;
844
845 if (!(cmd->flags & MMC_RSP_CRC))
846 *cmd_cfg |= CMD_CFG_RESP_NOCRC;
847
848 if (cmd->flags & MMC_RSP_BUSY)
849 *cmd_cfg |= CMD_CFG_R1B;
850 } else {
851 *cmd_cfg |= CMD_CFG_NO_RESP;
852 }
853}
854
855static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
856{
857 struct meson_host *host = mmc_priv(mmc);
858 struct sd_emmc_desc *desc = host->descs;
859 struct mmc_data *data = host->cmd->data;
860 struct scatterlist *sg;
861 u32 start;
862 int i;
863
864 if (data->flags & MMC_DATA_WRITE)
865 cmd_cfg |= CMD_CFG_DATA_WR;
866
867 if (data->blocks > 1) {
868 cmd_cfg |= CMD_CFG_BLOCK_MODE;
869 meson_mmc_set_blksz(mmc, data->blksz);
870 }
871
872 for_each_sg(data->sg, sg, data->sg_count, i) {
873 unsigned int len = sg_dma_len(sg);
874
875 if (data->blocks > 1)
876 len /= data->blksz;
877
878 desc[i].cmd_cfg = cmd_cfg;
879 desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
880 if (i > 0)
881 desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
882 desc[i].cmd_arg = host->cmd->arg;
883 desc[i].cmd_resp = 0;
884 desc[i].cmd_data = sg_dma_address(sg);
885 }
886 desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
887
888 dma_wmb(); /* ensure descriptor is written before kicked */
889 start = host->descs_dma_addr | START_DESC_BUSY;
890 writel(start, host->regs + SD_EMMC_START);
891}
892
893static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
894{
895 struct meson_host *host = mmc_priv(mmc);
896 struct mmc_data *data = cmd->data;
897 u32 cmd_cfg = 0, cmd_data = 0;
898 unsigned int xfer_bytes = 0;
899
900 /* Setup descriptors */
901 dma_rmb();
902
903 host->cmd = cmd;
904
905 cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
906 cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
907
908 meson_mmc_set_response_bits(cmd, &cmd_cfg);
909
910 /* data? */
911 if (data) {
912 data->bytes_xfered = 0;
913 cmd_cfg |= CMD_CFG_DATA_IO;
914 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
915 ilog2(meson_mmc_get_timeout_msecs(data)));
916
917 if (meson_mmc_desc_chain_mode(data)) {
918 meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
919 return;
920 }
921
922 if (data->blocks > 1) {
923 cmd_cfg |= CMD_CFG_BLOCK_MODE;
924 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
925 data->blocks);
926 meson_mmc_set_blksz(mmc, data->blksz);
927 } else {
928 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
929 }
930
931 xfer_bytes = data->blksz * data->blocks;
932 if (data->flags & MMC_DATA_WRITE) {
933 cmd_cfg |= CMD_CFG_DATA_WR;
934 WARN_ON(xfer_bytes > host->bounce_buf_size);
935 sg_copy_to_buffer(data->sg, data->sg_len,
936 host->bounce_buf, xfer_bytes);
937 dma_wmb();
938 }
939
940 cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
941 } else {
942 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
943 ilog2(SD_EMMC_CMD_TIMEOUT));
944 }
945
946 /* Last descriptor */
947 cmd_cfg |= CMD_CFG_END_OF_CHAIN;
948 writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
949 writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
950 writel(0, host->regs + SD_EMMC_CMD_RSP);
951 wmb(); /* ensure descriptor is written before kicked */
952 writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
953}
954
955static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
956{
957 struct meson_host *host = mmc_priv(mmc);
958 bool needs_pre_post_req = mrq->data &&
959 !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
960
961 if (needs_pre_post_req) {
962 meson_mmc_get_transfer_mode(mmc, mrq);
963 if (!meson_mmc_desc_chain_mode(mrq->data))
964 needs_pre_post_req = false;
965 }
966
967 if (needs_pre_post_req)
968 meson_mmc_pre_req(mmc, mrq);
969
970 /* Stop execution */
971 writel(0, host->regs + SD_EMMC_START);
972
973 meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
974
975 if (needs_pre_post_req)
976 meson_mmc_post_req(mmc, mrq, 0);
977}
978
979static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
980{
981 struct meson_host *host = mmc_priv(mmc);
982
983 if (cmd->flags & MMC_RSP_136) {
984 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
985 cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
986 cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
987 cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
988 } else if (cmd->flags & MMC_RSP_PRESENT) {
989 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
990 }
991}
992
993static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
994{
995 struct meson_host *host = dev_id;
996 struct mmc_command *cmd;
997 struct mmc_data *data;
998 u32 irq_en, status, raw_status;
999 irqreturn_t ret = IRQ_NONE;
1000
1001 if (WARN_ON(!host) || WARN_ON(!host->cmd))
1002 return IRQ_NONE;
1003
1004 spin_lock(&host->lock);
1005
1006 cmd = host->cmd;
1007 data = cmd->data;
1008 irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
1009 raw_status = readl(host->regs + SD_EMMC_STATUS);
1010 status = raw_status & irq_en;
1011
1012 cmd->error = 0;
1013 if (status & IRQ_CRC_ERR) {
1014 dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
1015 cmd->error = -EILSEQ;
1016 ret = IRQ_HANDLED;
1017 goto out;
1018 }
1019
1020 if (status & IRQ_TIMEOUTS) {
1021 dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
1022 cmd->error = -ETIMEDOUT;
1023 ret = IRQ_HANDLED;
1024 goto out;
1025 }
1026
1027 meson_mmc_read_resp(host->mmc, cmd);
1028
1029 if (status & IRQ_SDIO) {
1030 dev_dbg(host->dev, "IRQ: SDIO TODO.\n");
1031 ret = IRQ_HANDLED;
1032 }
1033
1034 if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
1035 if (data && !cmd->error)
1036 data->bytes_xfered = data->blksz * data->blocks;
1037 if (meson_mmc_bounce_buf_read(data) ||
1038 meson_mmc_get_next_command(cmd))
1039 ret = IRQ_WAKE_THREAD;
1040 else
1041 ret = IRQ_HANDLED;
1042 }
1043
1044out:
1045 /* ack all enabled interrupts */
1046 writel(irq_en, host->regs + SD_EMMC_STATUS);
1047
1048 if (ret == IRQ_HANDLED)
1049 meson_mmc_request_done(host->mmc, cmd->mrq);
1050 else if (ret == IRQ_NONE)
1051 dev_warn(host->dev,
1052 "Unexpected IRQ! status=0x%08x, irq_en=0x%08x\n",
1053 raw_status, irq_en);
1054
1055 spin_unlock(&host->lock);
1056 return ret;
1057}
1058
1059static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
1060{
1061 struct meson_host *host = dev_id;
1062 struct mmc_command *next_cmd, *cmd = host->cmd;
1063 struct mmc_data *data;
1064 unsigned int xfer_bytes;
1065
1066 if (WARN_ON(!cmd))
1067 return IRQ_NONE;
1068
1069 data = cmd->data;
1070 if (meson_mmc_bounce_buf_read(data)) {
1071 xfer_bytes = data->blksz * data->blocks;
1072 WARN_ON(xfer_bytes > host->bounce_buf_size);
1073 sg_copy_from_buffer(data->sg, data->sg_len,
1074 host->bounce_buf, xfer_bytes);
1075 }
1076
1077 next_cmd = meson_mmc_get_next_command(cmd);
1078 if (next_cmd)
1079 meson_mmc_start_cmd(host->mmc, next_cmd);
1080 else
1081 meson_mmc_request_done(host->mmc, cmd->mrq);
1082
1083 return IRQ_HANDLED;
1084}
1085
1086/*
1087 * NOTE: we only need this until the GPIO/pinctrl driver can handle
1088 * interrupts. For now, the MMC core will use this for polling.
1089 */
1090static int meson_mmc_get_cd(struct mmc_host *mmc)
1091{
1092 int status = mmc_gpio_get_cd(mmc);
1093
1094 if (status == -ENOSYS)
1095 return 1; /* assume present */
1096
1097 return status;
1098}
1099
1100static void meson_mmc_cfg_init(struct meson_host *host)
1101{
1102 u32 cfg = 0;
1103
1104 cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
1105 ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
1106 cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
1107 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
1108
1109 writel(cfg, host->regs + SD_EMMC_CFG);
1110}
1111
1112static int meson_mmc_card_busy(struct mmc_host *mmc)
1113{
1114 struct meson_host *host = mmc_priv(mmc);
1115 u32 regval;
1116
1117 regval = readl(host->regs + SD_EMMC_STATUS);
1118
1119 /* We are only interrested in lines 0 to 3, so mask the other ones */
1120 return !(FIELD_GET(STATUS_DATI, regval) & 0xf);
1121}
1122
1123static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
1124{
1125 /* vqmmc regulator is available */
1126 if (!IS_ERR(mmc->supply.vqmmc)) {
1127 /*
1128 * The usual amlogic setup uses a GPIO to switch from one
1129 * regulator to the other. While the voltage ramp up is
1130 * pretty fast, care must be taken when switching from 3.3v
1131 * to 1.8v. Please make sure the regulator framework is aware
1132 * of your own regulator constraints
1133 */
1134 return mmc_regulator_set_vqmmc(mmc, ios);
1135 }
1136
1137 /* no vqmmc regulator, assume fixed regulator at 3/3.3V */
1138 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1139 return 0;
1140
1141 return -EINVAL;
1142}
1143
1144static const struct mmc_host_ops meson_mmc_ops = {
1145 .request = meson_mmc_request,
1146 .set_ios = meson_mmc_set_ios,
1147 .get_cd = meson_mmc_get_cd,
1148 .pre_req = meson_mmc_pre_req,
1149 .post_req = meson_mmc_post_req,
1150 .execute_tuning = meson_mmc_execute_tuning,
1151 .card_busy = meson_mmc_card_busy,
1152 .start_signal_voltage_switch = meson_mmc_voltage_switch,
1153};
1154
1155static int meson_mmc_probe(struct platform_device *pdev)
1156{
1157 struct resource *res;
1158 struct meson_host *host;
1159 struct mmc_host *mmc;
1160 int ret, irq;
1161
1162 mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
1163 if (!mmc)
1164 return -ENOMEM;
1165 host = mmc_priv(mmc);
1166 host->mmc = mmc;
1167 host->dev = &pdev->dev;
1168 dev_set_drvdata(&pdev->dev, host);
1169
1170 spin_lock_init(&host->lock);
1171
1172 /* Get regulators and the supported OCR mask */
1173 host->vqmmc_enabled = false;
1174 ret = mmc_regulator_get_supply(mmc);
1175 if (ret == -EPROBE_DEFER)
1176 goto free_host;
1177
1178 ret = mmc_of_parse(mmc);
1179 if (ret) {
1180 if (ret != -EPROBE_DEFER)
1181 dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
1182 goto free_host;
1183 }
1184
1185 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1186 host->regs = devm_ioremap_resource(&pdev->dev, res);
1187 if (IS_ERR(host->regs)) {
1188 ret = PTR_ERR(host->regs);
1189 goto free_host;
1190 }
1191
1192 irq = platform_get_irq(pdev, 0);
1193 if (!irq) {
1194 dev_err(&pdev->dev, "failed to get interrupt resource.\n");
1195 ret = -EINVAL;
1196 goto free_host;
1197 }
1198
1199 host->pinctrl = devm_pinctrl_get(&pdev->dev);
1200 if (IS_ERR(host->pinctrl)) {
1201 ret = PTR_ERR(host->pinctrl);
1202 goto free_host;
1203 }
1204
1205 host->pins_default = pinctrl_lookup_state(host->pinctrl,
1206 PINCTRL_STATE_DEFAULT);
1207 if (IS_ERR(host->pins_default)) {
1208 ret = PTR_ERR(host->pins_default);
1209 goto free_host;
1210 }
1211
1212 host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
1213 "clk-gate");
1214 if (IS_ERR(host->pins_clk_gate)) {
1215 dev_warn(&pdev->dev,
1216 "can't get clk-gate pinctrl, using clk_stop bit\n");
1217 host->pins_clk_gate = NULL;
1218 }
1219
1220 host->core_clk = devm_clk_get(&pdev->dev, "core");
1221 if (IS_ERR(host->core_clk)) {
1222 ret = PTR_ERR(host->core_clk);
1223 goto free_host;
1224 }
1225
1226 ret = clk_prepare_enable(host->core_clk);
1227 if (ret)
1228 goto free_host;
1229
1230 ret = meson_mmc_clk_init(host);
1231 if (ret)
1232 goto err_core_clk;
1233
1234 /* set config to sane default */
1235 meson_mmc_cfg_init(host);
1236
1237 /* Stop execution */
1238 writel(0, host->regs + SD_EMMC_START);
1239
1240 /* clear, ack and enable interrupts */
1241 writel(0, host->regs + SD_EMMC_IRQ_EN);
1242 writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
1243 host->regs + SD_EMMC_STATUS);
1244 writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
1245 host->regs + SD_EMMC_IRQ_EN);
1246
1247 ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
1248 meson_mmc_irq_thread, IRQF_SHARED,
1249 NULL, host);
1250 if (ret)
1251 goto err_init_clk;
1252
1253 mmc->caps |= MMC_CAP_CMD23;
1254 mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
1255 mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
1256 mmc->max_segs = SD_EMMC_DESC_BUF_LEN / sizeof(struct sd_emmc_desc);
1257 mmc->max_seg_size = mmc->max_req_size;
1258
1259 /* data bounce buffer */
1260 host->bounce_buf_size = mmc->max_req_size;
1261 host->bounce_buf =
1262 dma_alloc_coherent(host->dev, host->bounce_buf_size,
1263 &host->bounce_dma_addr, GFP_KERNEL);
1264 if (host->bounce_buf == NULL) {
1265 dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
1266 ret = -ENOMEM;
1267 goto err_init_clk;
1268 }
1269
1270 host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1271 &host->descs_dma_addr, GFP_KERNEL);
1272 if (!host->descs) {
1273 dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
1274 ret = -ENOMEM;
1275 goto err_bounce_buf;
1276 }
1277
1278 mmc->ops = &meson_mmc_ops;
1279 mmc_add_host(mmc);
1280
1281 return 0;
1282
1283err_bounce_buf:
1284 dma_free_coherent(host->dev, host->bounce_buf_size,
1285 host->bounce_buf, host->bounce_dma_addr);
1286err_init_clk:
1287 clk_disable_unprepare(host->mmc_clk);
1288err_core_clk:
1289 clk_disable_unprepare(host->core_clk);
1290free_host:
1291 mmc_free_host(mmc);
1292 return ret;
1293}
1294
1295static int meson_mmc_remove(struct platform_device *pdev)
1296{
1297 struct meson_host *host = dev_get_drvdata(&pdev->dev);
1298
1299 mmc_remove_host(host->mmc);
1300
1301 /* disable interrupts */
1302 writel(0, host->regs + SD_EMMC_IRQ_EN);
1303
1304 dma_free_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1305 host->descs, host->descs_dma_addr);
1306 dma_free_coherent(host->dev, host->bounce_buf_size,
1307 host->bounce_buf, host->bounce_dma_addr);
1308
1309 clk_disable_unprepare(host->mmc_clk);
1310 clk_disable_unprepare(host->core_clk);
1311
1312 mmc_free_host(host->mmc);
1313 return 0;
1314}
1315
1316static const struct of_device_id meson_mmc_of_match[] = {
1317 { .compatible = "amlogic,meson-gx-mmc", },
1318 { .compatible = "amlogic,meson-gxbb-mmc", },
1319 { .compatible = "amlogic,meson-gxl-mmc", },
1320 { .compatible = "amlogic,meson-gxm-mmc", },
1321 {}
1322};
1323MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
1324
1325static struct platform_driver meson_mmc_driver = {
1326 .probe = meson_mmc_probe,
1327 .remove = meson_mmc_remove,
1328 .driver = {
1329 .name = DRIVER_NAME,
1330 .of_match_table = of_match_ptr(meson_mmc_of_match),
1331 },
1332};
1333
1334module_platform_driver(meson_mmc_driver);
1335
1336MODULE_DESCRIPTION("Amlogic S905*/GX* SD/eMMC driver");
1337MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
1338MODULE_LICENSE("GPL v2");