Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v4.1-rc4 319 lines 8.4 kB view raw
1/* 2 * ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC 3 * (C) Copyright 2010 4 * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> 5 * 6 * Based on the ads7828 driver by Steve Hardy. 7 * 8 * Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 23 */ 24 25#include <linux/module.h> 26#include <linux/init.h> 27#include <linux/slab.h> 28#include <linux/delay.h> 29#include <linux/i2c.h> 30#include <linux/hwmon.h> 31#include <linux/hwmon-sysfs.h> 32#include <linux/err.h> 33#include <linux/mutex.h> 34#include <linux/of.h> 35 36#include <linux/i2c/ads1015.h> 37 38/* ADS1015 registers */ 39enum { 40 ADS1015_CONVERSION = 0, 41 ADS1015_CONFIG = 1, 42}; 43 44/* PGA fullscale voltages in mV */ 45static const unsigned int fullscale_table[8] = { 46 6144, 4096, 2048, 1024, 512, 256, 256, 256 }; 47 48/* Data rates in samples per second */ 49static const unsigned int data_rate_table_1015[8] = { 50 128, 250, 490, 920, 1600, 2400, 3300, 3300 51}; 52 53static const unsigned int data_rate_table_1115[8] = { 54 8, 16, 32, 64, 128, 250, 475, 860 55}; 56 57#define ADS1015_DEFAULT_CHANNELS 0xff 58#define ADS1015_DEFAULT_PGA 2 59#define ADS1015_DEFAULT_DATA_RATE 4 60 61enum ads1015_chips { 62 ads1015, 63 ads1115, 64}; 65 66struct ads1015_data { 67 struct device *hwmon_dev; 68 struct mutex update_lock; /* mutex protect updates */ 69 struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; 70 enum ads1015_chips id; 71}; 72 73static int ads1015_read_adc(struct i2c_client *client, unsigned int channel) 74{ 75 u16 config; 76 struct ads1015_data *data = i2c_get_clientdata(client); 77 unsigned int pga = data->channel_data[channel].pga; 78 unsigned int data_rate = data->channel_data[channel].data_rate; 79 unsigned int conversion_time_ms; 80 const unsigned int * const rate_table = data->id == ads1115 ? 81 data_rate_table_1115 : data_rate_table_1015; 82 int res; 83 84 mutex_lock(&data->update_lock); 85 86 /* get channel parameters */ 87 res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG); 88 if (res < 0) 89 goto err_unlock; 90 config = res; 91 conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]); 92 93 /* setup and start single conversion */ 94 config &= 0x001f; 95 config |= (1 << 15) | (1 << 8); 96 config |= (channel & 0x0007) << 12; 97 config |= (pga & 0x0007) << 9; 98 config |= (data_rate & 0x0007) << 5; 99 100 res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config); 101 if (res < 0) 102 goto err_unlock; 103 104 /* wait until conversion finished */ 105 msleep(conversion_time_ms); 106 res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG); 107 if (res < 0) 108 goto err_unlock; 109 config = res; 110 if (!(config & (1 << 15))) { 111 /* conversion not finished in time */ 112 res = -EIO; 113 goto err_unlock; 114 } 115 116 res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION); 117 118err_unlock: 119 mutex_unlock(&data->update_lock); 120 return res; 121} 122 123static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel, 124 s16 reg) 125{ 126 struct ads1015_data *data = i2c_get_clientdata(client); 127 unsigned int pga = data->channel_data[channel].pga; 128 int fullscale = fullscale_table[pga]; 129 const unsigned mask = data->id == ads1115 ? 0x7fff : 0x7ff0; 130 131 return DIV_ROUND_CLOSEST(reg * fullscale, mask); 132} 133 134/* sysfs callback function */ 135static ssize_t show_in(struct device *dev, struct device_attribute *da, 136 char *buf) 137{ 138 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); 139 struct i2c_client *client = to_i2c_client(dev); 140 int res; 141 int index = attr->index; 142 143 res = ads1015_read_adc(client, index); 144 if (res < 0) 145 return res; 146 147 return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res)); 148} 149 150static const struct sensor_device_attribute ads1015_in[] = { 151 SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0), 152 SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1), 153 SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2), 154 SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3), 155 SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4), 156 SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5), 157 SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6), 158 SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7), 159}; 160 161/* 162 * Driver interface 163 */ 164 165static int ads1015_remove(struct i2c_client *client) 166{ 167 struct ads1015_data *data = i2c_get_clientdata(client); 168 int k; 169 170 hwmon_device_unregister(data->hwmon_dev); 171 for (k = 0; k < ADS1015_CHANNELS; ++k) 172 device_remove_file(&client->dev, &ads1015_in[k].dev_attr); 173 return 0; 174} 175 176#ifdef CONFIG_OF 177static int ads1015_get_channels_config_of(struct i2c_client *client) 178{ 179 struct ads1015_data *data = i2c_get_clientdata(client); 180 struct device_node *node; 181 182 if (!client->dev.of_node 183 || !of_get_next_child(client->dev.of_node, NULL)) 184 return -EINVAL; 185 186 for_each_child_of_node(client->dev.of_node, node) { 187 u32 pval; 188 unsigned int channel; 189 unsigned int pga = ADS1015_DEFAULT_PGA; 190 unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE; 191 192 if (of_property_read_u32(node, "reg", &pval)) { 193 dev_err(&client->dev, "invalid reg on %s\n", 194 node->full_name); 195 continue; 196 } 197 198 channel = pval; 199 if (channel >= ADS1015_CHANNELS) { 200 dev_err(&client->dev, 201 "invalid channel index %d on %s\n", 202 channel, node->full_name); 203 continue; 204 } 205 206 if (!of_property_read_u32(node, "ti,gain", &pval)) { 207 pga = pval; 208 if (pga > 6) { 209 dev_err(&client->dev, "invalid gain on %s\n", 210 node->full_name); 211 return -EINVAL; 212 } 213 } 214 215 if (!of_property_read_u32(node, "ti,datarate", &pval)) { 216 data_rate = pval; 217 if (data_rate > 7) { 218 dev_err(&client->dev, 219 "invalid data_rate on %s\n", 220 node->full_name); 221 return -EINVAL; 222 } 223 } 224 225 data->channel_data[channel].enabled = true; 226 data->channel_data[channel].pga = pga; 227 data->channel_data[channel].data_rate = data_rate; 228 } 229 230 return 0; 231} 232#endif 233 234static void ads1015_get_channels_config(struct i2c_client *client) 235{ 236 unsigned int k; 237 struct ads1015_data *data = i2c_get_clientdata(client); 238 struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev); 239 240 /* prefer platform data */ 241 if (pdata) { 242 memcpy(data->channel_data, pdata->channel_data, 243 sizeof(data->channel_data)); 244 return; 245 } 246 247#ifdef CONFIG_OF 248 if (!ads1015_get_channels_config_of(client)) 249 return; 250#endif 251 252 /* fallback on default configuration */ 253 for (k = 0; k < ADS1015_CHANNELS; ++k) { 254 data->channel_data[k].enabled = true; 255 data->channel_data[k].pga = ADS1015_DEFAULT_PGA; 256 data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE; 257 } 258} 259 260static int ads1015_probe(struct i2c_client *client, 261 const struct i2c_device_id *id) 262{ 263 struct ads1015_data *data; 264 int err; 265 unsigned int k; 266 267 data = devm_kzalloc(&client->dev, sizeof(struct ads1015_data), 268 GFP_KERNEL); 269 if (!data) 270 return -ENOMEM; 271 data->id = id->driver_data; 272 i2c_set_clientdata(client, data); 273 mutex_init(&data->update_lock); 274 275 /* build sysfs attribute group */ 276 ads1015_get_channels_config(client); 277 for (k = 0; k < ADS1015_CHANNELS; ++k) { 278 if (!data->channel_data[k].enabled) 279 continue; 280 err = device_create_file(&client->dev, &ads1015_in[k].dev_attr); 281 if (err) 282 goto exit_remove; 283 } 284 285 data->hwmon_dev = hwmon_device_register(&client->dev); 286 if (IS_ERR(data->hwmon_dev)) { 287 err = PTR_ERR(data->hwmon_dev); 288 goto exit_remove; 289 } 290 291 return 0; 292 293exit_remove: 294 for (k = 0; k < ADS1015_CHANNELS; ++k) 295 device_remove_file(&client->dev, &ads1015_in[k].dev_attr); 296 return err; 297} 298 299static const struct i2c_device_id ads1015_id[] = { 300 { "ads1015", ads1015}, 301 { "ads1115", ads1115}, 302 { } 303}; 304MODULE_DEVICE_TABLE(i2c, ads1015_id); 305 306static struct i2c_driver ads1015_driver = { 307 .driver = { 308 .name = "ads1015", 309 }, 310 .probe = ads1015_probe, 311 .remove = ads1015_remove, 312 .id_table = ads1015_id, 313}; 314 315module_i2c_driver(ads1015_driver); 316 317MODULE_AUTHOR("Dirk Eibach <eibach@gdsys.de>"); 318MODULE_DESCRIPTION("ADS1015 driver"); 319MODULE_LICENSE("GPL");