Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * udc.c - ChipIdea UDC driver
3 *
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
5 *
6 * Author: David Lopo
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/delay.h>
14#include <linux/device.h>
15#include <linux/dmapool.h>
16#include <linux/err.h>
17#include <linux/irqreturn.h>
18#include <linux/kernel.h>
19#include <linux/slab.h>
20#include <linux/pm_runtime.h>
21#include <linux/usb/ch9.h>
22#include <linux/usb/gadget.h>
23#include <linux/usb/otg-fsm.h>
24#include <linux/usb/chipidea.h>
25
26#include "ci.h"
27#include "udc.h"
28#include "bits.h"
29#include "debug.h"
30#include "otg.h"
31#include "otg_fsm.h"
32
33/* control endpoint description */
34static const struct usb_endpoint_descriptor
35ctrl_endpt_out_desc = {
36 .bLength = USB_DT_ENDPOINT_SIZE,
37 .bDescriptorType = USB_DT_ENDPOINT,
38
39 .bEndpointAddress = USB_DIR_OUT,
40 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
41 .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
42};
43
44static const struct usb_endpoint_descriptor
45ctrl_endpt_in_desc = {
46 .bLength = USB_DT_ENDPOINT_SIZE,
47 .bDescriptorType = USB_DT_ENDPOINT,
48
49 .bEndpointAddress = USB_DIR_IN,
50 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
51 .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
52};
53
54/**
55 * hw_ep_bit: calculates the bit number
56 * @num: endpoint number
57 * @dir: endpoint direction
58 *
59 * This function returns bit number
60 */
61static inline int hw_ep_bit(int num, int dir)
62{
63 return num + (dir ? 16 : 0);
64}
65
66static inline int ep_to_bit(struct ci_hdrc *ci, int n)
67{
68 int fill = 16 - ci->hw_ep_max / 2;
69
70 if (n >= ci->hw_ep_max / 2)
71 n += fill;
72
73 return n;
74}
75
76/**
77 * hw_device_state: enables/disables interrupts (execute without interruption)
78 * @dma: 0 => disable, !0 => enable and set dma engine
79 *
80 * This function returns an error code
81 */
82static int hw_device_state(struct ci_hdrc *ci, u32 dma)
83{
84 if (dma) {
85 hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
86 /* interrupt, error, port change, reset, sleep/suspend */
87 hw_write(ci, OP_USBINTR, ~0,
88 USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
89 } else {
90 hw_write(ci, OP_USBINTR, ~0, 0);
91 }
92 return 0;
93}
94
95/**
96 * hw_ep_flush: flush endpoint fifo (execute without interruption)
97 * @num: endpoint number
98 * @dir: endpoint direction
99 *
100 * This function returns an error code
101 */
102static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
103{
104 int n = hw_ep_bit(num, dir);
105
106 do {
107 /* flush any pending transfer */
108 hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
109 while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
110 cpu_relax();
111 } while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
112
113 return 0;
114}
115
116/**
117 * hw_ep_disable: disables endpoint (execute without interruption)
118 * @num: endpoint number
119 * @dir: endpoint direction
120 *
121 * This function returns an error code
122 */
123static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
124{
125 hw_ep_flush(ci, num, dir);
126 hw_write(ci, OP_ENDPTCTRL + num,
127 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
128 return 0;
129}
130
131/**
132 * hw_ep_enable: enables endpoint (execute without interruption)
133 * @num: endpoint number
134 * @dir: endpoint direction
135 * @type: endpoint type
136 *
137 * This function returns an error code
138 */
139static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
140{
141 u32 mask, data;
142
143 if (dir) {
144 mask = ENDPTCTRL_TXT; /* type */
145 data = type << __ffs(mask);
146
147 mask |= ENDPTCTRL_TXS; /* unstall */
148 mask |= ENDPTCTRL_TXR; /* reset data toggle */
149 data |= ENDPTCTRL_TXR;
150 mask |= ENDPTCTRL_TXE; /* enable */
151 data |= ENDPTCTRL_TXE;
152 } else {
153 mask = ENDPTCTRL_RXT; /* type */
154 data = type << __ffs(mask);
155
156 mask |= ENDPTCTRL_RXS; /* unstall */
157 mask |= ENDPTCTRL_RXR; /* reset data toggle */
158 data |= ENDPTCTRL_RXR;
159 mask |= ENDPTCTRL_RXE; /* enable */
160 data |= ENDPTCTRL_RXE;
161 }
162 hw_write(ci, OP_ENDPTCTRL + num, mask, data);
163 return 0;
164}
165
166/**
167 * hw_ep_get_halt: return endpoint halt status
168 * @num: endpoint number
169 * @dir: endpoint direction
170 *
171 * This function returns 1 if endpoint halted
172 */
173static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
174{
175 u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
176
177 return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
178}
179
180/**
181 * hw_ep_prime: primes endpoint (execute without interruption)
182 * @num: endpoint number
183 * @dir: endpoint direction
184 * @is_ctrl: true if control endpoint
185 *
186 * This function returns an error code
187 */
188static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
189{
190 int n = hw_ep_bit(num, dir);
191
192 if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
193 return -EAGAIN;
194
195 hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
196
197 while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
198 cpu_relax();
199 if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
200 return -EAGAIN;
201
202 /* status shoult be tested according with manual but it doesn't work */
203 return 0;
204}
205
206/**
207 * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
208 * without interruption)
209 * @num: endpoint number
210 * @dir: endpoint direction
211 * @value: true => stall, false => unstall
212 *
213 * This function returns an error code
214 */
215static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
216{
217 if (value != 0 && value != 1)
218 return -EINVAL;
219
220 do {
221 enum ci_hw_regs reg = OP_ENDPTCTRL + num;
222 u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
223 u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
224
225 /* data toggle - reserved for EP0 but it's in ESS */
226 hw_write(ci, reg, mask_xs|mask_xr,
227 value ? mask_xs : mask_xr);
228 } while (value != hw_ep_get_halt(ci, num, dir));
229
230 return 0;
231}
232
233/**
234 * hw_is_port_high_speed: test if port is high speed
235 *
236 * This function returns true if high speed port
237 */
238static int hw_port_is_high_speed(struct ci_hdrc *ci)
239{
240 return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
241 hw_read(ci, OP_PORTSC, PORTSC_HSP);
242}
243
244/**
245 * hw_test_and_clear_complete: test & clear complete status (execute without
246 * interruption)
247 * @n: endpoint number
248 *
249 * This function returns complete status
250 */
251static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
252{
253 n = ep_to_bit(ci, n);
254 return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
255}
256
257/**
258 * hw_test_and_clear_intr_active: test & clear active interrupts (execute
259 * without interruption)
260 *
261 * This function returns active interrutps
262 */
263static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
264{
265 u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
266
267 hw_write(ci, OP_USBSTS, ~0, reg);
268 return reg;
269}
270
271/**
272 * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
273 * interruption)
274 *
275 * This function returns guard value
276 */
277static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
278{
279 return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
280}
281
282/**
283 * hw_test_and_set_setup_guard: test & set setup guard (execute without
284 * interruption)
285 *
286 * This function returns guard value
287 */
288static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
289{
290 return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
291}
292
293/**
294 * hw_usb_set_address: configures USB address (execute without interruption)
295 * @value: new USB address
296 *
297 * This function explicitly sets the address, without the "USBADRA" (advance)
298 * feature, which is not supported by older versions of the controller.
299 */
300static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
301{
302 hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
303 value << __ffs(DEVICEADDR_USBADR));
304}
305
306/**
307 * hw_usb_reset: restart device after a bus reset (execute without
308 * interruption)
309 *
310 * This function returns an error code
311 */
312static int hw_usb_reset(struct ci_hdrc *ci)
313{
314 hw_usb_set_address(ci, 0);
315
316 /* ESS flushes only at end?!? */
317 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
318
319 /* clear setup token semaphores */
320 hw_write(ci, OP_ENDPTSETUPSTAT, 0, 0);
321
322 /* clear complete status */
323 hw_write(ci, OP_ENDPTCOMPLETE, 0, 0);
324
325 /* wait until all bits cleared */
326 while (hw_read(ci, OP_ENDPTPRIME, ~0))
327 udelay(10); /* not RTOS friendly */
328
329 /* reset all endpoints ? */
330
331 /* reset internal status and wait for further instructions
332 no need to verify the port reset status (ESS does it) */
333
334 return 0;
335}
336
337/******************************************************************************
338 * UTIL block
339 *****************************************************************************/
340
341static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
342 unsigned length)
343{
344 int i;
345 u32 temp;
346 struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
347 GFP_ATOMIC);
348
349 if (node == NULL)
350 return -ENOMEM;
351
352 node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC,
353 &node->dma);
354 if (node->ptr == NULL) {
355 kfree(node);
356 return -ENOMEM;
357 }
358
359 memset(node->ptr, 0, sizeof(struct ci_hw_td));
360 node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
361 node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
362 node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
363 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
364 u32 mul = hwreq->req.length / hwep->ep.maxpacket;
365
366 if (hwreq->req.length == 0
367 || hwreq->req.length % hwep->ep.maxpacket)
368 mul++;
369 node->ptr->token |= mul << __ffs(TD_MULTO);
370 }
371
372 temp = (u32) (hwreq->req.dma + hwreq->req.actual);
373 if (length) {
374 node->ptr->page[0] = cpu_to_le32(temp);
375 for (i = 1; i < TD_PAGE_COUNT; i++) {
376 u32 page = temp + i * CI_HDRC_PAGE_SIZE;
377 page &= ~TD_RESERVED_MASK;
378 node->ptr->page[i] = cpu_to_le32(page);
379 }
380 }
381
382 hwreq->req.actual += length;
383
384 if (!list_empty(&hwreq->tds)) {
385 /* get the last entry */
386 lastnode = list_entry(hwreq->tds.prev,
387 struct td_node, td);
388 lastnode->ptr->next = cpu_to_le32(node->dma);
389 }
390
391 INIT_LIST_HEAD(&node->td);
392 list_add_tail(&node->td, &hwreq->tds);
393
394 return 0;
395}
396
397/**
398 * _usb_addr: calculates endpoint address from direction & number
399 * @ep: endpoint
400 */
401static inline u8 _usb_addr(struct ci_hw_ep *ep)
402{
403 return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
404}
405
406/**
407 * _hardware_queue: configures a request at hardware level
408 * @gadget: gadget
409 * @hwep: endpoint
410 *
411 * This function returns an error code
412 */
413static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
414{
415 struct ci_hdrc *ci = hwep->ci;
416 int ret = 0;
417 unsigned rest = hwreq->req.length;
418 int pages = TD_PAGE_COUNT;
419 struct td_node *firstnode, *lastnode;
420
421 /* don't queue twice */
422 if (hwreq->req.status == -EALREADY)
423 return -EALREADY;
424
425 hwreq->req.status = -EALREADY;
426
427 ret = usb_gadget_map_request(&ci->gadget, &hwreq->req, hwep->dir);
428 if (ret)
429 return ret;
430
431 /*
432 * The first buffer could be not page aligned.
433 * In that case we have to span into one extra td.
434 */
435 if (hwreq->req.dma % PAGE_SIZE)
436 pages--;
437
438 if (rest == 0)
439 add_td_to_list(hwep, hwreq, 0);
440
441 while (rest > 0) {
442 unsigned count = min(hwreq->req.length - hwreq->req.actual,
443 (unsigned)(pages * CI_HDRC_PAGE_SIZE));
444 add_td_to_list(hwep, hwreq, count);
445 rest -= count;
446 }
447
448 if (hwreq->req.zero && hwreq->req.length
449 && (hwreq->req.length % hwep->ep.maxpacket == 0))
450 add_td_to_list(hwep, hwreq, 0);
451
452 firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
453
454 lastnode = list_entry(hwreq->tds.prev,
455 struct td_node, td);
456
457 lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
458 if (!hwreq->req.no_interrupt)
459 lastnode->ptr->token |= cpu_to_le32(TD_IOC);
460 wmb();
461
462 hwreq->req.actual = 0;
463 if (!list_empty(&hwep->qh.queue)) {
464 struct ci_hw_req *hwreqprev;
465 int n = hw_ep_bit(hwep->num, hwep->dir);
466 int tmp_stat;
467 struct td_node *prevlastnode;
468 u32 next = firstnode->dma & TD_ADDR_MASK;
469
470 hwreqprev = list_entry(hwep->qh.queue.prev,
471 struct ci_hw_req, queue);
472 prevlastnode = list_entry(hwreqprev->tds.prev,
473 struct td_node, td);
474
475 prevlastnode->ptr->next = cpu_to_le32(next);
476 wmb();
477 if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
478 goto done;
479 do {
480 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
481 tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
482 } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
483 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
484 if (tmp_stat)
485 goto done;
486 }
487
488 /* QH configuration */
489 hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
490 hwep->qh.ptr->td.token &=
491 cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
492
493 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
494 u32 mul = hwreq->req.length / hwep->ep.maxpacket;
495
496 if (hwreq->req.length == 0
497 || hwreq->req.length % hwep->ep.maxpacket)
498 mul++;
499 hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
500 }
501
502 wmb(); /* synchronize before ep prime */
503
504 ret = hw_ep_prime(ci, hwep->num, hwep->dir,
505 hwep->type == USB_ENDPOINT_XFER_CONTROL);
506done:
507 return ret;
508}
509
510/*
511 * free_pending_td: remove a pending request for the endpoint
512 * @hwep: endpoint
513 */
514static void free_pending_td(struct ci_hw_ep *hwep)
515{
516 struct td_node *pending = hwep->pending_td;
517
518 dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
519 hwep->pending_td = NULL;
520 kfree(pending);
521}
522
523static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
524 struct td_node *node)
525{
526 hwep->qh.ptr->td.next = node->dma;
527 hwep->qh.ptr->td.token &=
528 cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
529
530 /* Synchronize before ep prime */
531 wmb();
532
533 return hw_ep_prime(ci, hwep->num, hwep->dir,
534 hwep->type == USB_ENDPOINT_XFER_CONTROL);
535}
536
537/**
538 * _hardware_dequeue: handles a request at hardware level
539 * @gadget: gadget
540 * @hwep: endpoint
541 *
542 * This function returns an error code
543 */
544static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
545{
546 u32 tmptoken;
547 struct td_node *node, *tmpnode;
548 unsigned remaining_length;
549 unsigned actual = hwreq->req.length;
550 struct ci_hdrc *ci = hwep->ci;
551
552 if (hwreq->req.status != -EALREADY)
553 return -EINVAL;
554
555 hwreq->req.status = 0;
556
557 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
558 tmptoken = le32_to_cpu(node->ptr->token);
559 if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
560 int n = hw_ep_bit(hwep->num, hwep->dir);
561
562 if (ci->rev == CI_REVISION_24)
563 if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
564 reprime_dtd(ci, hwep, node);
565 hwreq->req.status = -EALREADY;
566 return -EBUSY;
567 }
568
569 remaining_length = (tmptoken & TD_TOTAL_BYTES);
570 remaining_length >>= __ffs(TD_TOTAL_BYTES);
571 actual -= remaining_length;
572
573 hwreq->req.status = tmptoken & TD_STATUS;
574 if ((TD_STATUS_HALTED & hwreq->req.status)) {
575 hwreq->req.status = -EPIPE;
576 break;
577 } else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
578 hwreq->req.status = -EPROTO;
579 break;
580 } else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
581 hwreq->req.status = -EILSEQ;
582 break;
583 }
584
585 if (remaining_length) {
586 if (hwep->dir) {
587 hwreq->req.status = -EPROTO;
588 break;
589 }
590 }
591 /*
592 * As the hardware could still address the freed td
593 * which will run the udc unusable, the cleanup of the
594 * td has to be delayed by one.
595 */
596 if (hwep->pending_td)
597 free_pending_td(hwep);
598
599 hwep->pending_td = node;
600 list_del_init(&node->td);
601 }
602
603 usb_gadget_unmap_request(&hwep->ci->gadget, &hwreq->req, hwep->dir);
604
605 hwreq->req.actual += actual;
606
607 if (hwreq->req.status)
608 return hwreq->req.status;
609
610 return hwreq->req.actual;
611}
612
613/**
614 * _ep_nuke: dequeues all endpoint requests
615 * @hwep: endpoint
616 *
617 * This function returns an error code
618 * Caller must hold lock
619 */
620static int _ep_nuke(struct ci_hw_ep *hwep)
621__releases(hwep->lock)
622__acquires(hwep->lock)
623{
624 struct td_node *node, *tmpnode;
625 if (hwep == NULL)
626 return -EINVAL;
627
628 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
629
630 while (!list_empty(&hwep->qh.queue)) {
631
632 /* pop oldest request */
633 struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
634 struct ci_hw_req, queue);
635
636 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
637 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
638 list_del_init(&node->td);
639 node->ptr = NULL;
640 kfree(node);
641 }
642
643 list_del_init(&hwreq->queue);
644 hwreq->req.status = -ESHUTDOWN;
645
646 if (hwreq->req.complete != NULL) {
647 spin_unlock(hwep->lock);
648 usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
649 spin_lock(hwep->lock);
650 }
651 }
652
653 if (hwep->pending_td)
654 free_pending_td(hwep);
655
656 return 0;
657}
658
659/**
660 * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
661 * @gadget: gadget
662 *
663 * This function returns an error code
664 */
665static int _gadget_stop_activity(struct usb_gadget *gadget)
666{
667 struct usb_ep *ep;
668 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
669 unsigned long flags;
670
671 spin_lock_irqsave(&ci->lock, flags);
672 ci->gadget.speed = USB_SPEED_UNKNOWN;
673 ci->remote_wakeup = 0;
674 ci->suspended = 0;
675 spin_unlock_irqrestore(&ci->lock, flags);
676
677 /* flush all endpoints */
678 gadget_for_each_ep(ep, gadget) {
679 usb_ep_fifo_flush(ep);
680 }
681 usb_ep_fifo_flush(&ci->ep0out->ep);
682 usb_ep_fifo_flush(&ci->ep0in->ep);
683
684 /* make sure to disable all endpoints */
685 gadget_for_each_ep(ep, gadget) {
686 usb_ep_disable(ep);
687 }
688
689 if (ci->status != NULL) {
690 usb_ep_free_request(&ci->ep0in->ep, ci->status);
691 ci->status = NULL;
692 }
693
694 return 0;
695}
696
697/******************************************************************************
698 * ISR block
699 *****************************************************************************/
700/**
701 * isr_reset_handler: USB reset interrupt handler
702 * @ci: UDC device
703 *
704 * This function resets USB engine after a bus reset occurred
705 */
706static void isr_reset_handler(struct ci_hdrc *ci)
707__releases(ci->lock)
708__acquires(ci->lock)
709{
710 int retval;
711
712 spin_unlock(&ci->lock);
713 if (ci->gadget.speed != USB_SPEED_UNKNOWN)
714 usb_gadget_udc_reset(&ci->gadget, ci->driver);
715
716 retval = _gadget_stop_activity(&ci->gadget);
717 if (retval)
718 goto done;
719
720 retval = hw_usb_reset(ci);
721 if (retval)
722 goto done;
723
724 ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
725 if (ci->status == NULL)
726 retval = -ENOMEM;
727
728done:
729 spin_lock(&ci->lock);
730
731 if (retval)
732 dev_err(ci->dev, "error: %i\n", retval);
733}
734
735/**
736 * isr_get_status_complete: get_status request complete function
737 * @ep: endpoint
738 * @req: request handled
739 *
740 * Caller must release lock
741 */
742static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
743{
744 if (ep == NULL || req == NULL)
745 return;
746
747 kfree(req->buf);
748 usb_ep_free_request(ep, req);
749}
750
751/**
752 * _ep_queue: queues (submits) an I/O request to an endpoint
753 *
754 * Caller must hold lock
755 */
756static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
757 gfp_t __maybe_unused gfp_flags)
758{
759 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
760 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
761 struct ci_hdrc *ci = hwep->ci;
762 int retval = 0;
763
764 if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
765 return -EINVAL;
766
767 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
768 if (req->length)
769 hwep = (ci->ep0_dir == RX) ?
770 ci->ep0out : ci->ep0in;
771 if (!list_empty(&hwep->qh.queue)) {
772 _ep_nuke(hwep);
773 retval = -EOVERFLOW;
774 dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
775 _usb_addr(hwep));
776 }
777 }
778
779 if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
780 hwreq->req.length > (1 + hwep->ep.mult) * hwep->ep.maxpacket) {
781 dev_err(hwep->ci->dev, "request length too big for isochronous\n");
782 return -EMSGSIZE;
783 }
784
785 /* first nuke then test link, e.g. previous status has not sent */
786 if (!list_empty(&hwreq->queue)) {
787 dev_err(hwep->ci->dev, "request already in queue\n");
788 return -EBUSY;
789 }
790
791 /* push request */
792 hwreq->req.status = -EINPROGRESS;
793 hwreq->req.actual = 0;
794
795 retval = _hardware_enqueue(hwep, hwreq);
796
797 if (retval == -EALREADY)
798 retval = 0;
799 if (!retval)
800 list_add_tail(&hwreq->queue, &hwep->qh.queue);
801
802 return retval;
803}
804
805/**
806 * isr_get_status_response: get_status request response
807 * @ci: ci struct
808 * @setup: setup request packet
809 *
810 * This function returns an error code
811 */
812static int isr_get_status_response(struct ci_hdrc *ci,
813 struct usb_ctrlrequest *setup)
814__releases(hwep->lock)
815__acquires(hwep->lock)
816{
817 struct ci_hw_ep *hwep = ci->ep0in;
818 struct usb_request *req = NULL;
819 gfp_t gfp_flags = GFP_ATOMIC;
820 int dir, num, retval;
821
822 if (hwep == NULL || setup == NULL)
823 return -EINVAL;
824
825 spin_unlock(hwep->lock);
826 req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
827 spin_lock(hwep->lock);
828 if (req == NULL)
829 return -ENOMEM;
830
831 req->complete = isr_get_status_complete;
832 req->length = 2;
833 req->buf = kzalloc(req->length, gfp_flags);
834 if (req->buf == NULL) {
835 retval = -ENOMEM;
836 goto err_free_req;
837 }
838
839 if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
840 *(u16 *)req->buf = (ci->remote_wakeup << 1) |
841 ci->gadget.is_selfpowered;
842 } else if ((setup->bRequestType & USB_RECIP_MASK) \
843 == USB_RECIP_ENDPOINT) {
844 dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
845 TX : RX;
846 num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
847 *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
848 }
849 /* else do nothing; reserved for future use */
850
851 retval = _ep_queue(&hwep->ep, req, gfp_flags);
852 if (retval)
853 goto err_free_buf;
854
855 return 0;
856
857 err_free_buf:
858 kfree(req->buf);
859 err_free_req:
860 spin_unlock(hwep->lock);
861 usb_ep_free_request(&hwep->ep, req);
862 spin_lock(hwep->lock);
863 return retval;
864}
865
866/**
867 * isr_setup_status_complete: setup_status request complete function
868 * @ep: endpoint
869 * @req: request handled
870 *
871 * Caller must release lock. Put the port in test mode if test mode
872 * feature is selected.
873 */
874static void
875isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
876{
877 struct ci_hdrc *ci = req->context;
878 unsigned long flags;
879
880 if (ci->setaddr) {
881 hw_usb_set_address(ci, ci->address);
882 ci->setaddr = false;
883 if (ci->address)
884 usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS);
885 }
886
887 spin_lock_irqsave(&ci->lock, flags);
888 if (ci->test_mode)
889 hw_port_test_set(ci, ci->test_mode);
890 spin_unlock_irqrestore(&ci->lock, flags);
891}
892
893/**
894 * isr_setup_status_phase: queues the status phase of a setup transation
895 * @ci: ci struct
896 *
897 * This function returns an error code
898 */
899static int isr_setup_status_phase(struct ci_hdrc *ci)
900{
901 int retval;
902 struct ci_hw_ep *hwep;
903
904 hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
905 ci->status->context = ci;
906 ci->status->complete = isr_setup_status_complete;
907
908 retval = _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
909
910 return retval;
911}
912
913/**
914 * isr_tr_complete_low: transaction complete low level handler
915 * @hwep: endpoint
916 *
917 * This function returns an error code
918 * Caller must hold lock
919 */
920static int isr_tr_complete_low(struct ci_hw_ep *hwep)
921__releases(hwep->lock)
922__acquires(hwep->lock)
923{
924 struct ci_hw_req *hwreq, *hwreqtemp;
925 struct ci_hw_ep *hweptemp = hwep;
926 int retval = 0;
927
928 list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
929 queue) {
930 retval = _hardware_dequeue(hwep, hwreq);
931 if (retval < 0)
932 break;
933 list_del_init(&hwreq->queue);
934 if (hwreq->req.complete != NULL) {
935 spin_unlock(hwep->lock);
936 if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
937 hwreq->req.length)
938 hweptemp = hwep->ci->ep0in;
939 usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req);
940 spin_lock(hwep->lock);
941 }
942 }
943
944 if (retval == -EBUSY)
945 retval = 0;
946
947 return retval;
948}
949
950static int otg_a_alt_hnp_support(struct ci_hdrc *ci)
951{
952 dev_warn(&ci->gadget.dev,
953 "connect the device to an alternate port if you want HNP\n");
954 return isr_setup_status_phase(ci);
955}
956
957/**
958 * isr_setup_packet_handler: setup packet handler
959 * @ci: UDC descriptor
960 *
961 * This function handles setup packet
962 */
963static void isr_setup_packet_handler(struct ci_hdrc *ci)
964__releases(ci->lock)
965__acquires(ci->lock)
966{
967 struct ci_hw_ep *hwep = &ci->ci_hw_ep[0];
968 struct usb_ctrlrequest req;
969 int type, num, dir, err = -EINVAL;
970 u8 tmode = 0;
971
972 /*
973 * Flush data and handshake transactions of previous
974 * setup packet.
975 */
976 _ep_nuke(ci->ep0out);
977 _ep_nuke(ci->ep0in);
978
979 /* read_setup_packet */
980 do {
981 hw_test_and_set_setup_guard(ci);
982 memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
983 } while (!hw_test_and_clear_setup_guard(ci));
984
985 type = req.bRequestType;
986
987 ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
988
989 switch (req.bRequest) {
990 case USB_REQ_CLEAR_FEATURE:
991 if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
992 le16_to_cpu(req.wValue) ==
993 USB_ENDPOINT_HALT) {
994 if (req.wLength != 0)
995 break;
996 num = le16_to_cpu(req.wIndex);
997 dir = num & USB_ENDPOINT_DIR_MASK;
998 num &= USB_ENDPOINT_NUMBER_MASK;
999 if (dir) /* TX */
1000 num += ci->hw_ep_max / 2;
1001 if (!ci->ci_hw_ep[num].wedge) {
1002 spin_unlock(&ci->lock);
1003 err = usb_ep_clear_halt(
1004 &ci->ci_hw_ep[num].ep);
1005 spin_lock(&ci->lock);
1006 if (err)
1007 break;
1008 }
1009 err = isr_setup_status_phase(ci);
1010 } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
1011 le16_to_cpu(req.wValue) ==
1012 USB_DEVICE_REMOTE_WAKEUP) {
1013 if (req.wLength != 0)
1014 break;
1015 ci->remote_wakeup = 0;
1016 err = isr_setup_status_phase(ci);
1017 } else {
1018 goto delegate;
1019 }
1020 break;
1021 case USB_REQ_GET_STATUS:
1022 if (type != (USB_DIR_IN|USB_RECIP_DEVICE) &&
1023 type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
1024 type != (USB_DIR_IN|USB_RECIP_INTERFACE))
1025 goto delegate;
1026 if (le16_to_cpu(req.wLength) != 2 ||
1027 le16_to_cpu(req.wValue) != 0)
1028 break;
1029 err = isr_get_status_response(ci, &req);
1030 break;
1031 case USB_REQ_SET_ADDRESS:
1032 if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
1033 goto delegate;
1034 if (le16_to_cpu(req.wLength) != 0 ||
1035 le16_to_cpu(req.wIndex) != 0)
1036 break;
1037 ci->address = (u8)le16_to_cpu(req.wValue);
1038 ci->setaddr = true;
1039 err = isr_setup_status_phase(ci);
1040 break;
1041 case USB_REQ_SET_FEATURE:
1042 if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
1043 le16_to_cpu(req.wValue) ==
1044 USB_ENDPOINT_HALT) {
1045 if (req.wLength != 0)
1046 break;
1047 num = le16_to_cpu(req.wIndex);
1048 dir = num & USB_ENDPOINT_DIR_MASK;
1049 num &= USB_ENDPOINT_NUMBER_MASK;
1050 if (dir) /* TX */
1051 num += ci->hw_ep_max / 2;
1052
1053 spin_unlock(&ci->lock);
1054 err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
1055 spin_lock(&ci->lock);
1056 if (!err)
1057 isr_setup_status_phase(ci);
1058 } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
1059 if (req.wLength != 0)
1060 break;
1061 switch (le16_to_cpu(req.wValue)) {
1062 case USB_DEVICE_REMOTE_WAKEUP:
1063 ci->remote_wakeup = 1;
1064 err = isr_setup_status_phase(ci);
1065 break;
1066 case USB_DEVICE_TEST_MODE:
1067 tmode = le16_to_cpu(req.wIndex) >> 8;
1068 switch (tmode) {
1069 case TEST_J:
1070 case TEST_K:
1071 case TEST_SE0_NAK:
1072 case TEST_PACKET:
1073 case TEST_FORCE_EN:
1074 ci->test_mode = tmode;
1075 err = isr_setup_status_phase(
1076 ci);
1077 break;
1078 default:
1079 break;
1080 }
1081 break;
1082 case USB_DEVICE_B_HNP_ENABLE:
1083 if (ci_otg_is_fsm_mode(ci)) {
1084 ci->gadget.b_hnp_enable = 1;
1085 err = isr_setup_status_phase(
1086 ci);
1087 }
1088 break;
1089 case USB_DEVICE_A_ALT_HNP_SUPPORT:
1090 if (ci_otg_is_fsm_mode(ci))
1091 err = otg_a_alt_hnp_support(ci);
1092 break;
1093 default:
1094 goto delegate;
1095 }
1096 } else {
1097 goto delegate;
1098 }
1099 break;
1100 default:
1101delegate:
1102 if (req.wLength == 0) /* no data phase */
1103 ci->ep0_dir = TX;
1104
1105 spin_unlock(&ci->lock);
1106 err = ci->driver->setup(&ci->gadget, &req);
1107 spin_lock(&ci->lock);
1108 break;
1109 }
1110
1111 if (err < 0) {
1112 spin_unlock(&ci->lock);
1113 if (usb_ep_set_halt(&hwep->ep))
1114 dev_err(ci->dev, "error: ep_set_halt\n");
1115 spin_lock(&ci->lock);
1116 }
1117}
1118
1119/**
1120 * isr_tr_complete_handler: transaction complete interrupt handler
1121 * @ci: UDC descriptor
1122 *
1123 * This function handles traffic events
1124 */
1125static void isr_tr_complete_handler(struct ci_hdrc *ci)
1126__releases(ci->lock)
1127__acquires(ci->lock)
1128{
1129 unsigned i;
1130 int err;
1131
1132 for (i = 0; i < ci->hw_ep_max; i++) {
1133 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
1134
1135 if (hwep->ep.desc == NULL)
1136 continue; /* not configured */
1137
1138 if (hw_test_and_clear_complete(ci, i)) {
1139 err = isr_tr_complete_low(hwep);
1140 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1141 if (err > 0) /* needs status phase */
1142 err = isr_setup_status_phase(ci);
1143 if (err < 0) {
1144 spin_unlock(&ci->lock);
1145 if (usb_ep_set_halt(&hwep->ep))
1146 dev_err(ci->dev,
1147 "error: ep_set_halt\n");
1148 spin_lock(&ci->lock);
1149 }
1150 }
1151 }
1152
1153 /* Only handle setup packet below */
1154 if (i == 0 &&
1155 hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
1156 isr_setup_packet_handler(ci);
1157 }
1158}
1159
1160/******************************************************************************
1161 * ENDPT block
1162 *****************************************************************************/
1163/**
1164 * ep_enable: configure endpoint, making it usable
1165 *
1166 * Check usb_ep_enable() at "usb_gadget.h" for details
1167 */
1168static int ep_enable(struct usb_ep *ep,
1169 const struct usb_endpoint_descriptor *desc)
1170{
1171 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1172 int retval = 0;
1173 unsigned long flags;
1174 u32 cap = 0;
1175
1176 if (ep == NULL || desc == NULL)
1177 return -EINVAL;
1178
1179 spin_lock_irqsave(hwep->lock, flags);
1180
1181 /* only internal SW should enable ctrl endpts */
1182
1183 if (!list_empty(&hwep->qh.queue)) {
1184 dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
1185 spin_unlock_irqrestore(hwep->lock, flags);
1186 return -EBUSY;
1187 }
1188
1189 hwep->ep.desc = desc;
1190
1191 hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX;
1192 hwep->num = usb_endpoint_num(desc);
1193 hwep->type = usb_endpoint_type(desc);
1194
1195 hwep->ep.maxpacket = usb_endpoint_maxp(desc) & 0x07ff;
1196 hwep->ep.mult = QH_ISO_MULT(usb_endpoint_maxp(desc));
1197
1198 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1199 cap |= QH_IOS;
1200
1201 cap |= QH_ZLT;
1202 cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
1203 /*
1204 * For ISO-TX, we set mult at QH as the largest value, and use
1205 * MultO at TD as real mult value.
1206 */
1207 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
1208 cap |= 3 << __ffs(QH_MULT);
1209
1210 hwep->qh.ptr->cap = cpu_to_le32(cap);
1211
1212 hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */
1213
1214 if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1215 dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
1216 retval = -EINVAL;
1217 }
1218
1219 /*
1220 * Enable endpoints in the HW other than ep0 as ep0
1221 * is always enabled
1222 */
1223 if (hwep->num)
1224 retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
1225 hwep->type);
1226
1227 spin_unlock_irqrestore(hwep->lock, flags);
1228 return retval;
1229}
1230
1231/**
1232 * ep_disable: endpoint is no longer usable
1233 *
1234 * Check usb_ep_disable() at "usb_gadget.h" for details
1235 */
1236static int ep_disable(struct usb_ep *ep)
1237{
1238 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1239 int direction, retval = 0;
1240 unsigned long flags;
1241
1242 if (ep == NULL)
1243 return -EINVAL;
1244 else if (hwep->ep.desc == NULL)
1245 return -EBUSY;
1246
1247 spin_lock_irqsave(hwep->lock, flags);
1248
1249 /* only internal SW should disable ctrl endpts */
1250
1251 direction = hwep->dir;
1252 do {
1253 retval |= _ep_nuke(hwep);
1254 retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
1255
1256 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1257 hwep->dir = (hwep->dir == TX) ? RX : TX;
1258
1259 } while (hwep->dir != direction);
1260
1261 hwep->ep.desc = NULL;
1262
1263 spin_unlock_irqrestore(hwep->lock, flags);
1264 return retval;
1265}
1266
1267/**
1268 * ep_alloc_request: allocate a request object to use with this endpoint
1269 *
1270 * Check usb_ep_alloc_request() at "usb_gadget.h" for details
1271 */
1272static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
1273{
1274 struct ci_hw_req *hwreq = NULL;
1275
1276 if (ep == NULL)
1277 return NULL;
1278
1279 hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
1280 if (hwreq != NULL) {
1281 INIT_LIST_HEAD(&hwreq->queue);
1282 INIT_LIST_HEAD(&hwreq->tds);
1283 }
1284
1285 return (hwreq == NULL) ? NULL : &hwreq->req;
1286}
1287
1288/**
1289 * ep_free_request: frees a request object
1290 *
1291 * Check usb_ep_free_request() at "usb_gadget.h" for details
1292 */
1293static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
1294{
1295 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1296 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1297 struct td_node *node, *tmpnode;
1298 unsigned long flags;
1299
1300 if (ep == NULL || req == NULL) {
1301 return;
1302 } else if (!list_empty(&hwreq->queue)) {
1303 dev_err(hwep->ci->dev, "freeing queued request\n");
1304 return;
1305 }
1306
1307 spin_lock_irqsave(hwep->lock, flags);
1308
1309 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1310 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1311 list_del_init(&node->td);
1312 node->ptr = NULL;
1313 kfree(node);
1314 }
1315
1316 kfree(hwreq);
1317
1318 spin_unlock_irqrestore(hwep->lock, flags);
1319}
1320
1321/**
1322 * ep_queue: queues (submits) an I/O request to an endpoint
1323 *
1324 * Check usb_ep_queue()* at usb_gadget.h" for details
1325 */
1326static int ep_queue(struct usb_ep *ep, struct usb_request *req,
1327 gfp_t __maybe_unused gfp_flags)
1328{
1329 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1330 int retval = 0;
1331 unsigned long flags;
1332
1333 if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
1334 return -EINVAL;
1335
1336 spin_lock_irqsave(hwep->lock, flags);
1337 retval = _ep_queue(ep, req, gfp_flags);
1338 spin_unlock_irqrestore(hwep->lock, flags);
1339 return retval;
1340}
1341
1342/**
1343 * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
1344 *
1345 * Check usb_ep_dequeue() at "usb_gadget.h" for details
1346 */
1347static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
1348{
1349 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1350 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1351 unsigned long flags;
1352 struct td_node *node, *tmpnode;
1353
1354 if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
1355 hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
1356 list_empty(&hwep->qh.queue))
1357 return -EINVAL;
1358
1359 spin_lock_irqsave(hwep->lock, flags);
1360
1361 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1362
1363 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1364 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1365 list_del(&node->td);
1366 kfree(node);
1367 }
1368
1369 /* pop request */
1370 list_del_init(&hwreq->queue);
1371
1372 usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
1373
1374 req->status = -ECONNRESET;
1375
1376 if (hwreq->req.complete != NULL) {
1377 spin_unlock(hwep->lock);
1378 usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
1379 spin_lock(hwep->lock);
1380 }
1381
1382 spin_unlock_irqrestore(hwep->lock, flags);
1383 return 0;
1384}
1385
1386/**
1387 * ep_set_halt: sets the endpoint halt feature
1388 *
1389 * Check usb_ep_set_halt() at "usb_gadget.h" for details
1390 */
1391static int ep_set_halt(struct usb_ep *ep, int value)
1392{
1393 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1394 int direction, retval = 0;
1395 unsigned long flags;
1396
1397 if (ep == NULL || hwep->ep.desc == NULL)
1398 return -EINVAL;
1399
1400 if (usb_endpoint_xfer_isoc(hwep->ep.desc))
1401 return -EOPNOTSUPP;
1402
1403 spin_lock_irqsave(hwep->lock, flags);
1404
1405#ifndef STALL_IN
1406 /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
1407 if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
1408 !list_empty(&hwep->qh.queue)) {
1409 spin_unlock_irqrestore(hwep->lock, flags);
1410 return -EAGAIN;
1411 }
1412#endif
1413
1414 direction = hwep->dir;
1415 do {
1416 retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
1417
1418 if (!value)
1419 hwep->wedge = 0;
1420
1421 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1422 hwep->dir = (hwep->dir == TX) ? RX : TX;
1423
1424 } while (hwep->dir != direction);
1425
1426 spin_unlock_irqrestore(hwep->lock, flags);
1427 return retval;
1428}
1429
1430/**
1431 * ep_set_wedge: sets the halt feature and ignores clear requests
1432 *
1433 * Check usb_ep_set_wedge() at "usb_gadget.h" for details
1434 */
1435static int ep_set_wedge(struct usb_ep *ep)
1436{
1437 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1438 unsigned long flags;
1439
1440 if (ep == NULL || hwep->ep.desc == NULL)
1441 return -EINVAL;
1442
1443 spin_lock_irqsave(hwep->lock, flags);
1444 hwep->wedge = 1;
1445 spin_unlock_irqrestore(hwep->lock, flags);
1446
1447 return usb_ep_set_halt(ep);
1448}
1449
1450/**
1451 * ep_fifo_flush: flushes contents of a fifo
1452 *
1453 * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
1454 */
1455static void ep_fifo_flush(struct usb_ep *ep)
1456{
1457 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1458 unsigned long flags;
1459
1460 if (ep == NULL) {
1461 dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
1462 return;
1463 }
1464
1465 spin_lock_irqsave(hwep->lock, flags);
1466
1467 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1468
1469 spin_unlock_irqrestore(hwep->lock, flags);
1470}
1471
1472/**
1473 * Endpoint-specific part of the API to the USB controller hardware
1474 * Check "usb_gadget.h" for details
1475 */
1476static const struct usb_ep_ops usb_ep_ops = {
1477 .enable = ep_enable,
1478 .disable = ep_disable,
1479 .alloc_request = ep_alloc_request,
1480 .free_request = ep_free_request,
1481 .queue = ep_queue,
1482 .dequeue = ep_dequeue,
1483 .set_halt = ep_set_halt,
1484 .set_wedge = ep_set_wedge,
1485 .fifo_flush = ep_fifo_flush,
1486};
1487
1488/******************************************************************************
1489 * GADGET block
1490 *****************************************************************************/
1491static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
1492{
1493 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1494 unsigned long flags;
1495 int gadget_ready = 0;
1496
1497 spin_lock_irqsave(&ci->lock, flags);
1498 ci->vbus_active = is_active;
1499 if (ci->driver)
1500 gadget_ready = 1;
1501 spin_unlock_irqrestore(&ci->lock, flags);
1502
1503 if (gadget_ready) {
1504 if (is_active) {
1505 pm_runtime_get_sync(&_gadget->dev);
1506 hw_device_reset(ci);
1507 hw_device_state(ci, ci->ep0out->qh.dma);
1508 usb_gadget_set_state(_gadget, USB_STATE_POWERED);
1509 usb_udc_vbus_handler(_gadget, true);
1510 } else {
1511 usb_udc_vbus_handler(_gadget, false);
1512 if (ci->driver)
1513 ci->driver->disconnect(&ci->gadget);
1514 hw_device_state(ci, 0);
1515 if (ci->platdata->notify_event)
1516 ci->platdata->notify_event(ci,
1517 CI_HDRC_CONTROLLER_STOPPED_EVENT);
1518 _gadget_stop_activity(&ci->gadget);
1519 pm_runtime_put_sync(&_gadget->dev);
1520 usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
1521 }
1522 }
1523
1524 return 0;
1525}
1526
1527static int ci_udc_wakeup(struct usb_gadget *_gadget)
1528{
1529 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1530 unsigned long flags;
1531 int ret = 0;
1532
1533 spin_lock_irqsave(&ci->lock, flags);
1534 if (!ci->remote_wakeup) {
1535 ret = -EOPNOTSUPP;
1536 goto out;
1537 }
1538 if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
1539 ret = -EINVAL;
1540 goto out;
1541 }
1542 hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
1543out:
1544 spin_unlock_irqrestore(&ci->lock, flags);
1545 return ret;
1546}
1547
1548static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
1549{
1550 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1551
1552 if (ci->usb_phy)
1553 return usb_phy_set_power(ci->usb_phy, ma);
1554 return -ENOTSUPP;
1555}
1556
1557static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on)
1558{
1559 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1560 struct ci_hw_ep *hwep = ci->ep0in;
1561 unsigned long flags;
1562
1563 spin_lock_irqsave(hwep->lock, flags);
1564 _gadget->is_selfpowered = (is_on != 0);
1565 spin_unlock_irqrestore(hwep->lock, flags);
1566
1567 return 0;
1568}
1569
1570/* Change Data+ pullup status
1571 * this func is used by usb_gadget_connect/disconnet
1572 */
1573static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
1574{
1575 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1576
1577 /* Data+ pullup controlled by OTG state machine in OTG fsm mode */
1578 if (ci_otg_is_fsm_mode(ci))
1579 return 0;
1580
1581 pm_runtime_get_sync(&ci->gadget.dev);
1582 if (is_on)
1583 hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
1584 else
1585 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
1586 pm_runtime_put_sync(&ci->gadget.dev);
1587
1588 return 0;
1589}
1590
1591static int ci_udc_start(struct usb_gadget *gadget,
1592 struct usb_gadget_driver *driver);
1593static int ci_udc_stop(struct usb_gadget *gadget);
1594/**
1595 * Device operations part of the API to the USB controller hardware,
1596 * which don't involve endpoints (or i/o)
1597 * Check "usb_gadget.h" for details
1598 */
1599static const struct usb_gadget_ops usb_gadget_ops = {
1600 .vbus_session = ci_udc_vbus_session,
1601 .wakeup = ci_udc_wakeup,
1602 .set_selfpowered = ci_udc_selfpowered,
1603 .pullup = ci_udc_pullup,
1604 .vbus_draw = ci_udc_vbus_draw,
1605 .udc_start = ci_udc_start,
1606 .udc_stop = ci_udc_stop,
1607};
1608
1609static int init_eps(struct ci_hdrc *ci)
1610{
1611 int retval = 0, i, j;
1612
1613 for (i = 0; i < ci->hw_ep_max/2; i++)
1614 for (j = RX; j <= TX; j++) {
1615 int k = i + j * ci->hw_ep_max/2;
1616 struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
1617
1618 scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
1619 (j == TX) ? "in" : "out");
1620
1621 hwep->ci = ci;
1622 hwep->lock = &ci->lock;
1623 hwep->td_pool = ci->td_pool;
1624
1625 hwep->ep.name = hwep->name;
1626 hwep->ep.ops = &usb_ep_ops;
1627 /*
1628 * for ep0: maxP defined in desc, for other
1629 * eps, maxP is set by epautoconfig() called
1630 * by gadget layer
1631 */
1632 usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
1633
1634 INIT_LIST_HEAD(&hwep->qh.queue);
1635 hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
1636 &hwep->qh.dma);
1637 if (hwep->qh.ptr == NULL)
1638 retval = -ENOMEM;
1639 else
1640 memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr));
1641
1642 /*
1643 * set up shorthands for ep0 out and in endpoints,
1644 * don't add to gadget's ep_list
1645 */
1646 if (i == 0) {
1647 if (j == RX)
1648 ci->ep0out = hwep;
1649 else
1650 ci->ep0in = hwep;
1651
1652 usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
1653 continue;
1654 }
1655
1656 list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
1657 }
1658
1659 return retval;
1660}
1661
1662static void destroy_eps(struct ci_hdrc *ci)
1663{
1664 int i;
1665
1666 for (i = 0; i < ci->hw_ep_max; i++) {
1667 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
1668
1669 if (hwep->pending_td)
1670 free_pending_td(hwep);
1671 dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
1672 }
1673}
1674
1675/**
1676 * ci_udc_start: register a gadget driver
1677 * @gadget: our gadget
1678 * @driver: the driver being registered
1679 *
1680 * Interrupts are enabled here.
1681 */
1682static int ci_udc_start(struct usb_gadget *gadget,
1683 struct usb_gadget_driver *driver)
1684{
1685 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1686 unsigned long flags;
1687 int retval = -ENOMEM;
1688
1689 if (driver->disconnect == NULL)
1690 return -EINVAL;
1691
1692
1693 ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
1694 retval = usb_ep_enable(&ci->ep0out->ep);
1695 if (retval)
1696 return retval;
1697
1698 ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
1699 retval = usb_ep_enable(&ci->ep0in->ep);
1700 if (retval)
1701 return retval;
1702
1703 ci->driver = driver;
1704
1705 /* Start otg fsm for B-device */
1706 if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) {
1707 ci_hdrc_otg_fsm_start(ci);
1708 return retval;
1709 }
1710
1711 pm_runtime_get_sync(&ci->gadget.dev);
1712 if (ci->vbus_active) {
1713 spin_lock_irqsave(&ci->lock, flags);
1714 hw_device_reset(ci);
1715 } else {
1716 usb_udc_vbus_handler(&ci->gadget, false);
1717 pm_runtime_put_sync(&ci->gadget.dev);
1718 return retval;
1719 }
1720
1721 retval = hw_device_state(ci, ci->ep0out->qh.dma);
1722 spin_unlock_irqrestore(&ci->lock, flags);
1723 if (retval)
1724 pm_runtime_put_sync(&ci->gadget.dev);
1725
1726 return retval;
1727}
1728
1729/**
1730 * ci_udc_stop: unregister a gadget driver
1731 */
1732static int ci_udc_stop(struct usb_gadget *gadget)
1733{
1734 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1735 unsigned long flags;
1736
1737 spin_lock_irqsave(&ci->lock, flags);
1738
1739 if (ci->vbus_active) {
1740 hw_device_state(ci, 0);
1741 if (ci->platdata->notify_event)
1742 ci->platdata->notify_event(ci,
1743 CI_HDRC_CONTROLLER_STOPPED_EVENT);
1744 spin_unlock_irqrestore(&ci->lock, flags);
1745 _gadget_stop_activity(&ci->gadget);
1746 spin_lock_irqsave(&ci->lock, flags);
1747 pm_runtime_put(&ci->gadget.dev);
1748 }
1749
1750 ci->driver = NULL;
1751 spin_unlock_irqrestore(&ci->lock, flags);
1752
1753 return 0;
1754}
1755
1756/******************************************************************************
1757 * BUS block
1758 *****************************************************************************/
1759/**
1760 * udc_irq: ci interrupt handler
1761 *
1762 * This function returns IRQ_HANDLED if the IRQ has been handled
1763 * It locks access to registers
1764 */
1765static irqreturn_t udc_irq(struct ci_hdrc *ci)
1766{
1767 irqreturn_t retval;
1768 u32 intr;
1769
1770 if (ci == NULL)
1771 return IRQ_HANDLED;
1772
1773 spin_lock(&ci->lock);
1774
1775 if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
1776 if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
1777 USBMODE_CM_DC) {
1778 spin_unlock(&ci->lock);
1779 return IRQ_NONE;
1780 }
1781 }
1782 intr = hw_test_and_clear_intr_active(ci);
1783
1784 if (intr) {
1785 /* order defines priority - do NOT change it */
1786 if (USBi_URI & intr)
1787 isr_reset_handler(ci);
1788
1789 if (USBi_PCI & intr) {
1790 ci->gadget.speed = hw_port_is_high_speed(ci) ?
1791 USB_SPEED_HIGH : USB_SPEED_FULL;
1792 if (ci->suspended && ci->driver->resume) {
1793 spin_unlock(&ci->lock);
1794 ci->driver->resume(&ci->gadget);
1795 spin_lock(&ci->lock);
1796 ci->suspended = 0;
1797 }
1798 }
1799
1800 if (USBi_UI & intr)
1801 isr_tr_complete_handler(ci);
1802
1803 if (USBi_SLI & intr) {
1804 if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
1805 ci->driver->suspend) {
1806 ci->suspended = 1;
1807 spin_unlock(&ci->lock);
1808 ci->driver->suspend(&ci->gadget);
1809 usb_gadget_set_state(&ci->gadget,
1810 USB_STATE_SUSPENDED);
1811 spin_lock(&ci->lock);
1812 }
1813 }
1814 retval = IRQ_HANDLED;
1815 } else {
1816 retval = IRQ_NONE;
1817 }
1818 spin_unlock(&ci->lock);
1819
1820 return retval;
1821}
1822
1823/**
1824 * udc_start: initialize gadget role
1825 * @ci: chipidea controller
1826 */
1827static int udc_start(struct ci_hdrc *ci)
1828{
1829 struct device *dev = ci->dev;
1830 int retval = 0;
1831
1832 spin_lock_init(&ci->lock);
1833
1834 ci->gadget.ops = &usb_gadget_ops;
1835 ci->gadget.speed = USB_SPEED_UNKNOWN;
1836 ci->gadget.max_speed = USB_SPEED_HIGH;
1837 ci->gadget.is_otg = ci->is_otg ? 1 : 0;
1838 ci->gadget.name = ci->platdata->name;
1839
1840 INIT_LIST_HEAD(&ci->gadget.ep_list);
1841
1842 /* alloc resources */
1843 ci->qh_pool = dma_pool_create("ci_hw_qh", dev,
1844 sizeof(struct ci_hw_qh),
1845 64, CI_HDRC_PAGE_SIZE);
1846 if (ci->qh_pool == NULL)
1847 return -ENOMEM;
1848
1849 ci->td_pool = dma_pool_create("ci_hw_td", dev,
1850 sizeof(struct ci_hw_td),
1851 64, CI_HDRC_PAGE_SIZE);
1852 if (ci->td_pool == NULL) {
1853 retval = -ENOMEM;
1854 goto free_qh_pool;
1855 }
1856
1857 retval = init_eps(ci);
1858 if (retval)
1859 goto free_pools;
1860
1861 ci->gadget.ep0 = &ci->ep0in->ep;
1862
1863 retval = usb_add_gadget_udc(dev, &ci->gadget);
1864 if (retval)
1865 goto destroy_eps;
1866
1867 pm_runtime_no_callbacks(&ci->gadget.dev);
1868 pm_runtime_enable(&ci->gadget.dev);
1869
1870 return retval;
1871
1872destroy_eps:
1873 destroy_eps(ci);
1874free_pools:
1875 dma_pool_destroy(ci->td_pool);
1876free_qh_pool:
1877 dma_pool_destroy(ci->qh_pool);
1878 return retval;
1879}
1880
1881/**
1882 * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
1883 *
1884 * No interrupts active, the IRQ has been released
1885 */
1886void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
1887{
1888 if (!ci->roles[CI_ROLE_GADGET])
1889 return;
1890
1891 usb_del_gadget_udc(&ci->gadget);
1892
1893 destroy_eps(ci);
1894
1895 dma_pool_destroy(ci->td_pool);
1896 dma_pool_destroy(ci->qh_pool);
1897}
1898
1899static int udc_id_switch_for_device(struct ci_hdrc *ci)
1900{
1901 if (ci->is_otg)
1902 /* Clear and enable BSV irq */
1903 hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
1904 OTGSC_BSVIS | OTGSC_BSVIE);
1905
1906 return 0;
1907}
1908
1909static void udc_id_switch_for_host(struct ci_hdrc *ci)
1910{
1911 /*
1912 * host doesn't care B_SESSION_VALID event
1913 * so clear and disbale BSV irq
1914 */
1915 if (ci->is_otg)
1916 hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
1917}
1918
1919/**
1920 * ci_hdrc_gadget_init - initialize device related bits
1921 * ci: the controller
1922 *
1923 * This function initializes the gadget, if the device is "device capable".
1924 */
1925int ci_hdrc_gadget_init(struct ci_hdrc *ci)
1926{
1927 struct ci_role_driver *rdrv;
1928
1929 if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
1930 return -ENXIO;
1931
1932 rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
1933 if (!rdrv)
1934 return -ENOMEM;
1935
1936 rdrv->start = udc_id_switch_for_device;
1937 rdrv->stop = udc_id_switch_for_host;
1938 rdrv->irq = udc_irq;
1939 rdrv->name = "gadget";
1940 ci->roles[CI_ROLE_GADGET] = rdrv;
1941
1942 return udc_start(ci);
1943}