Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/*
2 * include/linux/topology.h
3 *
4 * Written by: Matthew Dobson, IBM Corporation
5 *
6 * Copyright (C) 2002, IBM Corp.
7 *
8 * All rights reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
18 * NON INFRINGEMENT. See the GNU General Public License for more
19 * details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 *
25 * Send feedback to <colpatch@us.ibm.com>
26 */
27#ifndef _LINUX_TOPOLOGY_H
28#define _LINUX_TOPOLOGY_H
29
30#include <linux/cpumask.h>
31#include <linux/bitops.h>
32#include <linux/mmzone.h>
33#include <linux/smp.h>
34#include <linux/percpu.h>
35#include <asm/topology.h>
36
37#ifndef node_has_online_mem
38#define node_has_online_mem(nid) (1)
39#endif
40
41#ifndef nr_cpus_node
42#define nr_cpus_node(node) cpumask_weight(cpumask_of_node(node))
43#endif
44
45#define for_each_node_with_cpus(node) \
46 for_each_online_node(node) \
47 if (nr_cpus_node(node))
48
49int arch_update_cpu_topology(void);
50
51/* Conform to ACPI 2.0 SLIT distance definitions */
52#define LOCAL_DISTANCE 10
53#define REMOTE_DISTANCE 20
54#ifndef node_distance
55#define node_distance(from,to) ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
56#endif
57#ifndef RECLAIM_DISTANCE
58/*
59 * If the distance between nodes in a system is larger than RECLAIM_DISTANCE
60 * (in whatever arch specific measurement units returned by node_distance())
61 * then switch on zone reclaim on boot.
62 */
63#define RECLAIM_DISTANCE 30
64#endif
65#ifndef PENALTY_FOR_NODE_WITH_CPUS
66#define PENALTY_FOR_NODE_WITH_CPUS (1)
67#endif
68
69/*
70 * Below are the 3 major initializers used in building sched_domains:
71 * SD_SIBLING_INIT, for SMT domains
72 * SD_CPU_INIT, for SMP domains
73 *
74 * Any architecture that cares to do any tuning to these values should do so
75 * by defining their own arch-specific initializer in include/asm/topology.h.
76 * A definition there will automagically override these default initializers
77 * and allow arch-specific performance tuning of sched_domains.
78 * (Only non-zero and non-null fields need be specified.)
79 */
80
81#ifdef CONFIG_SCHED_SMT
82/* MCD - Do we really need this? It is always on if CONFIG_SCHED_SMT is,
83 * so can't we drop this in favor of CONFIG_SCHED_SMT?
84 */
85#define ARCH_HAS_SCHED_WAKE_IDLE
86/* Common values for SMT siblings */
87#ifndef SD_SIBLING_INIT
88#define SD_SIBLING_INIT (struct sched_domain) { \
89 .min_interval = 1, \
90 .max_interval = 2, \
91 .busy_factor = 64, \
92 .imbalance_pct = 110, \
93 \
94 .flags = 1*SD_LOAD_BALANCE \
95 | 1*SD_BALANCE_NEWIDLE \
96 | 1*SD_BALANCE_EXEC \
97 | 1*SD_BALANCE_FORK \
98 | 0*SD_BALANCE_WAKE \
99 | 1*SD_WAKE_AFFINE \
100 | 1*SD_SHARE_CPUPOWER \
101 | 1*SD_SHARE_PKG_RESOURCES \
102 | 0*SD_SERIALIZE \
103 | 0*SD_PREFER_SIBLING \
104 | arch_sd_sibling_asym_packing() \
105 , \
106 .last_balance = jiffies, \
107 .balance_interval = 1, \
108 .smt_gain = 1178, /* 15% */ \
109}
110#endif
111#endif /* CONFIG_SCHED_SMT */
112
113#ifdef CONFIG_SCHED_MC
114/* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
115#ifndef SD_MC_INIT
116#define SD_MC_INIT (struct sched_domain) { \
117 .min_interval = 1, \
118 .max_interval = 4, \
119 .busy_factor = 64, \
120 .imbalance_pct = 125, \
121 .cache_nice_tries = 1, \
122 .busy_idx = 2, \
123 .wake_idx = 0, \
124 .forkexec_idx = 0, \
125 \
126 .flags = 1*SD_LOAD_BALANCE \
127 | 1*SD_BALANCE_NEWIDLE \
128 | 1*SD_BALANCE_EXEC \
129 | 1*SD_BALANCE_FORK \
130 | 0*SD_BALANCE_WAKE \
131 | 1*SD_WAKE_AFFINE \
132 | 0*SD_SHARE_CPUPOWER \
133 | 1*SD_SHARE_PKG_RESOURCES \
134 | 0*SD_SERIALIZE \
135 , \
136 .last_balance = jiffies, \
137 .balance_interval = 1, \
138}
139#endif
140#endif /* CONFIG_SCHED_MC */
141
142/* Common values for CPUs */
143#ifndef SD_CPU_INIT
144#define SD_CPU_INIT (struct sched_domain) { \
145 .min_interval = 1, \
146 .max_interval = 4, \
147 .busy_factor = 64, \
148 .imbalance_pct = 125, \
149 .cache_nice_tries = 1, \
150 .busy_idx = 2, \
151 .idle_idx = 1, \
152 .newidle_idx = 0, \
153 .wake_idx = 0, \
154 .forkexec_idx = 0, \
155 \
156 .flags = 1*SD_LOAD_BALANCE \
157 | 1*SD_BALANCE_NEWIDLE \
158 | 1*SD_BALANCE_EXEC \
159 | 1*SD_BALANCE_FORK \
160 | 0*SD_BALANCE_WAKE \
161 | 1*SD_WAKE_AFFINE \
162 | 0*SD_SHARE_CPUPOWER \
163 | 0*SD_SHARE_PKG_RESOURCES \
164 | 0*SD_SERIALIZE \
165 | 1*SD_PREFER_SIBLING \
166 , \
167 .last_balance = jiffies, \
168 .balance_interval = 1, \
169}
170#endif
171
172#ifdef CONFIG_SCHED_BOOK
173#ifndef SD_BOOK_INIT
174#error Please define an appropriate SD_BOOK_INIT in include/asm/topology.h!!!
175#endif
176#endif /* CONFIG_SCHED_BOOK */
177
178#ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
179DECLARE_PER_CPU(int, numa_node);
180
181#ifndef numa_node_id
182/* Returns the number of the current Node. */
183static inline int numa_node_id(void)
184{
185 return __this_cpu_read(numa_node);
186}
187#endif
188
189#ifndef cpu_to_node
190static inline int cpu_to_node(int cpu)
191{
192 return per_cpu(numa_node, cpu);
193}
194#endif
195
196#ifndef set_numa_node
197static inline void set_numa_node(int node)
198{
199 this_cpu_write(numa_node, node);
200}
201#endif
202
203#ifndef set_cpu_numa_node
204static inline void set_cpu_numa_node(int cpu, int node)
205{
206 per_cpu(numa_node, cpu) = node;
207}
208#endif
209
210#else /* !CONFIG_USE_PERCPU_NUMA_NODE_ID */
211
212/* Returns the number of the current Node. */
213#ifndef numa_node_id
214static inline int numa_node_id(void)
215{
216 return cpu_to_node(raw_smp_processor_id());
217}
218#endif
219
220#endif /* [!]CONFIG_USE_PERCPU_NUMA_NODE_ID */
221
222#ifdef CONFIG_HAVE_MEMORYLESS_NODES
223
224/*
225 * N.B., Do NOT reference the '_numa_mem_' per cpu variable directly.
226 * It will not be defined when CONFIG_HAVE_MEMORYLESS_NODES is not defined.
227 * Use the accessor functions set_numa_mem(), numa_mem_id() and cpu_to_mem().
228 */
229DECLARE_PER_CPU(int, _numa_mem_);
230
231#ifndef set_numa_mem
232static inline void set_numa_mem(int node)
233{
234 this_cpu_write(_numa_mem_, node);
235}
236#endif
237
238#ifndef numa_mem_id
239/* Returns the number of the nearest Node with memory */
240static inline int numa_mem_id(void)
241{
242 return __this_cpu_read(_numa_mem_);
243}
244#endif
245
246#ifndef cpu_to_mem
247static inline int cpu_to_mem(int cpu)
248{
249 return per_cpu(_numa_mem_, cpu);
250}
251#endif
252
253#ifndef set_cpu_numa_mem
254static inline void set_cpu_numa_mem(int cpu, int node)
255{
256 per_cpu(_numa_mem_, cpu) = node;
257}
258#endif
259
260#else /* !CONFIG_HAVE_MEMORYLESS_NODES */
261
262#ifndef numa_mem_id
263/* Returns the number of the nearest Node with memory */
264static inline int numa_mem_id(void)
265{
266 return numa_node_id();
267}
268#endif
269
270#ifndef cpu_to_mem
271static inline int cpu_to_mem(int cpu)
272{
273 return cpu_to_node(cpu);
274}
275#endif
276
277#endif /* [!]CONFIG_HAVE_MEMORYLESS_NODES */
278
279#ifndef topology_physical_package_id
280#define topology_physical_package_id(cpu) ((void)(cpu), -1)
281#endif
282#ifndef topology_core_id
283#define topology_core_id(cpu) ((void)(cpu), 0)
284#endif
285#ifndef topology_thread_cpumask
286#define topology_thread_cpumask(cpu) cpumask_of(cpu)
287#endif
288#ifndef topology_core_cpumask
289#define topology_core_cpumask(cpu) cpumask_of(cpu)
290#endif
291
292#endif /* _LINUX_TOPOLOGY_H */