tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#
2# SATA/PATA driver configuration
3#
4
5config HAVE_PATA_PLATFORM
6 bool
7 help
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
12
13menuconfig ATA
14 tristate "Serial ATA and Parallel ATA drivers"
15 depends on HAS_IOMEM
16 depends on BLOCK
17 depends on !(M32R || M68K || S390) || BROKEN
18 select SCSI
19 ---help---
20 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
25
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
30
31if ATA
32
33config ATA_NONSTANDARD
34 bool
35 default n
36
37config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
39 default y
40 help
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
45
46 If unsure, say Y.
47
48config ATA_ACPI
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
51 default y
52 help
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
60
61config SATA_ZPODD
62 bool "SATA Zero Power ODD Support"
63 depends on ATA_ACPI
64 default n
65 help
66 This option adds support for SATA ZPODD. It requires both
67 ODD and the platform support, and if enabled, will automatically
68 power on/off the ODD when certain condition is satisfied. This
69 does not impact user's experience of the ODD, only power is saved
70 when ODD is not in use(i.e. no disc inside).
71
72 If unsure, say N.
73
74config SATA_PMP
75 bool "SATA Port Multiplier support"
76 default y
77 help
78 This option adds support for SATA Port Multipliers
79 (the SATA version of an ethernet hub, or SAS expander).
80
81comment "Controllers with non-SFF native interface"
82
83config SATA_AHCI
84 tristate "AHCI SATA support"
85 depends on PCI
86 help
87 This option enables support for AHCI Serial ATA.
88
89 If unsure, say N.
90
91config SATA_AHCI_PLATFORM
92 tristate "Platform AHCI SATA support"
93 help
94 This option enables support for Platform AHCI Serial ATA
95 controllers.
96
97 If unsure, say N.
98
99config SATA_FSL
100 tristate "Freescale 3.0Gbps SATA support"
101 depends on FSL_SOC
102 help
103 This option enables support for Freescale 3.0Gbps SATA controller.
104 It can be found on MPC837x and MPC8315.
105
106 If unsure, say N.
107
108config SATA_INIC162X
109 tristate "Initio 162x SATA support"
110 depends on PCI
111 help
112 This option enables support for Initio 162x Serial ATA.
113
114config SATA_ACARD_AHCI
115 tristate "ACard AHCI variant (ATP 8620)"
116 depends on PCI
117 help
118 This option enables support for Acard.
119
120 If unsure, say N.
121
122config SATA_SIL24
123 tristate "Silicon Image 3124/3132 SATA support"
124 depends on PCI
125 help
126 This option enables support for Silicon Image 3124/3132 Serial ATA.
127
128 If unsure, say N.
129
130config ATA_SFF
131 bool "ATA SFF support (for legacy IDE and PATA)"
132 default y
133 help
134 This option adds support for ATA controllers with SFF
135 compliant or similar programming interface.
136
137 SFF is the legacy IDE interface that has been around since
138 the dawn of time. Almost all PATA controllers have an
139 SFF interface. Many SATA controllers have an SFF interface
140 when configured into a legacy compatibility mode.
141
142 For users with exclusively modern controllers like AHCI,
143 Silicon Image 3124, or Marvell 6440, you may choose to
144 disable this unneeded SFF support.
145
146 If unsure, say Y.
147
148if ATA_SFF
149
150comment "SFF controllers with custom DMA interface"
151
152config PDC_ADMA
153 tristate "Pacific Digital ADMA support"
154 depends on PCI
155 help
156 This option enables support for Pacific Digital ADMA controllers
157
158 If unsure, say N.
159
160config PATA_OCTEON_CF
161 tristate "OCTEON Boot Bus Compact Flash support"
162 depends on CPU_CAVIUM_OCTEON
163 help
164 This option enables a polled compact flash driver for use with
165 compact flash cards attached to the OCTEON boot bus.
166
167 If unsure, say N.
168
169config SATA_QSTOR
170 tristate "Pacific Digital SATA QStor support"
171 depends on PCI
172 help
173 This option enables support for Pacific Digital Serial ATA QStor.
174
175 If unsure, say N.
176
177config SATA_SX4
178 tristate "Promise SATA SX4 support (Experimental)"
179 depends on PCI
180 help
181 This option enables support for Promise Serial ATA SX4.
182
183 If unsure, say N.
184
185config ATA_BMDMA
186 bool "ATA BMDMA support"
187 default y
188 help
189 This option adds support for SFF ATA controllers with BMDMA
190 capability. BMDMA stands for bus-master DMA and is the
191 de facto DMA interface for SFF controllers.
192
193 If unsure, say Y.
194
195if ATA_BMDMA
196
197comment "SATA SFF controllers with BMDMA"
198
199config ATA_PIIX
200 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
201 depends on PCI
202 help
203 This option enables support for ICH5/6/7/8 Serial ATA
204 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
205 host controllers.
206
207 If unsure, say N.
208
209config SATA_DWC
210 tristate "DesignWare Cores SATA support"
211 depends on 460EX
212 help
213 This option enables support for the on-chip SATA controller of the
214 AppliedMicro processor 460EX.
215
216 If unsure, say N.
217
218config SATA_DWC_DEBUG
219 bool "Debugging driver version"
220 depends on SATA_DWC
221 help
222 This option enables debugging output in the driver.
223
224config SATA_DWC_VDEBUG
225 bool "Verbose debug output"
226 depends on SATA_DWC_DEBUG
227 help
228 This option enables the taskfile dumping and NCQ debugging.
229
230config SATA_HIGHBANK
231 tristate "Calxeda Highbank SATA support"
232 help
233 This option enables support for the Calxeda Highbank SoC's
234 onboard SATA.
235
236 If unsure, say N.
237
238config SATA_MV
239 tristate "Marvell SATA support"
240 help
241 This option enables support for the Marvell Serial ATA family.
242 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
243 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
244
245 If unsure, say N.
246
247config SATA_NV
248 tristate "NVIDIA SATA support"
249 depends on PCI
250 help
251 This option enables support for NVIDIA Serial ATA.
252
253 If unsure, say N.
254
255config SATA_PROMISE
256 tristate "Promise SATA TX2/TX4 support"
257 depends on PCI
258 help
259 This option enables support for Promise Serial ATA TX2/TX4.
260
261 If unsure, say N.
262
263config SATA_RCAR
264 tristate "Renesas R-Car SATA support"
265 depends on ARCH_SHMOBILE && ARCH_R8A7779
266 help
267 This option enables support for Renesas R-Car Serial ATA.
268
269 If unsure, say N.
270
271config SATA_SIL
272 tristate "Silicon Image SATA support"
273 depends on PCI
274 help
275 This option enables support for Silicon Image Serial ATA.
276
277 If unsure, say N.
278
279config SATA_SIS
280 tristate "SiS 964/965/966/180 SATA support"
281 depends on PCI
282 select PATA_SIS
283 help
284 This option enables support for SiS Serial ATA on
285 SiS 964/965/966/180 and Parallel ATA on SiS 180.
286 The PATA support for SiS 180 requires additionally to
287 enable the PATA_SIS driver in the config.
288 If unsure, say N.
289
290config SATA_SVW
291 tristate "ServerWorks Frodo / Apple K2 SATA support"
292 depends on PCI
293 help
294 This option enables support for Broadcom/Serverworks/Apple K2
295 SATA support.
296
297 If unsure, say N.
298
299config SATA_ULI
300 tristate "ULi Electronics SATA support"
301 depends on PCI
302 help
303 This option enables support for ULi Electronics SATA.
304
305 If unsure, say N.
306
307config SATA_VIA
308 tristate "VIA SATA support"
309 depends on PCI
310 help
311 This option enables support for VIA Serial ATA.
312
313 If unsure, say N.
314
315config SATA_VITESSE
316 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
317 depends on PCI
318 help
319 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
320
321 If unsure, say N.
322
323comment "PATA SFF controllers with BMDMA"
324
325config PATA_ALI
326 tristate "ALi PATA support"
327 depends on PCI
328 help
329 This option enables support for the ALi ATA interfaces
330 found on the many ALi chipsets.
331
332 If unsure, say N.
333
334config PATA_AMD
335 tristate "AMD/NVidia PATA support"
336 depends on PCI
337 help
338 This option enables support for the AMD and NVidia PATA
339 interfaces found on the chipsets for Athlon/Athlon64.
340
341 If unsure, say N.
342
343config PATA_ARASAN_CF
344 tristate "ARASAN CompactFlash PATA Controller Support"
345 depends on DMADEVICES
346 select DMA_ENGINE
347 help
348 Say Y here to support the ARASAN CompactFlash PATA controller
349
350config PATA_ARTOP
351 tristate "ARTOP 6210/6260 PATA support"
352 depends on PCI
353 help
354 This option enables support for ARTOP PATA controllers.
355
356 If unsure, say N.
357
358config PATA_ATIIXP
359 tristate "ATI PATA support"
360 depends on PCI
361 help
362 This option enables support for the ATI ATA interfaces
363 found on the many ATI chipsets.
364
365 If unsure, say N.
366
367config PATA_ATP867X
368 tristate "ARTOP/Acard ATP867X PATA support"
369 depends on PCI
370 help
371 This option enables support for ARTOP/Acard ATP867X PATA
372 controllers.
373
374 If unsure, say N.
375
376config PATA_BF54X
377 tristate "Blackfin 54x ATAPI support"
378 depends on BF542 || BF548 || BF549
379 help
380 This option enables support for the built-in ATAPI controller on
381 Blackfin 54x family chips.
382
383 If unsure, say N.
384
385config PATA_CMD64X
386 tristate "CMD64x PATA support"
387 depends on PCI
388 help
389 This option enables support for the CMD64x series chips
390 except for the CMD640.
391
392 If unsure, say N.
393
394config PATA_CS5520
395 tristate "CS5510/5520 PATA support"
396 depends on PCI
397 help
398 This option enables support for the Cyrix 5510/5520
399 companion chip used with the MediaGX/Geode processor family.
400
401 If unsure, say N.
402
403config PATA_CS5530
404 tristate "CS5530 PATA support"
405 depends on PCI
406 help
407 This option enables support for the Cyrix/NatSemi/AMD CS5530
408 companion chip used with the MediaGX/Geode processor family.
409
410 If unsure, say N.
411
412config PATA_CS5535
413 tristate "CS5535 PATA support (Experimental)"
414 depends on PCI && X86 && !X86_64
415 help
416 This option enables support for the NatSemi/AMD CS5535
417 companion chip used with the Geode processor family.
418
419 If unsure, say N.
420
421config PATA_CS5536
422 tristate "CS5536 PATA support"
423 depends on PCI
424 help
425 This option enables support for the AMD CS5536
426 companion chip used with the Geode LX processor family.
427
428 If unsure, say N.
429
430config PATA_CYPRESS
431 tristate "Cypress CY82C693 PATA support (Very Experimental)"
432 depends on PCI
433 help
434 This option enables support for the Cypress/Contaq CY82C693
435 chipset found in some Alpha systems
436
437 If unsure, say N.
438
439config PATA_EFAR
440 tristate "EFAR SLC90E66 support"
441 depends on PCI
442 help
443 This option enables support for the EFAR SLC90E66
444 IDE controller found on some older machines.
445
446 If unsure, say N.
447
448config PATA_EP93XX
449 tristate "Cirrus Logic EP93xx PATA support"
450 depends on ARCH_EP93XX
451 help
452 This option enables support for the PATA controller in
453 the Cirrus Logic EP9312 and EP9315 ARM CPU.
454
455 If unsure, say N.
456
457config PATA_HPT366
458 tristate "HPT 366/368 PATA support"
459 depends on PCI
460 help
461 This option enables support for the HPT 366 and 368
462 PATA controllers via the new ATA layer.
463
464 If unsure, say N.
465
466config PATA_HPT37X
467 tristate "HPT 370/370A/371/372/374/302 PATA support"
468 depends on PCI
469 help
470 This option enables support for the majority of the later HPT
471 PATA controllers via the new ATA layer.
472
473 If unsure, say N.
474
475config PATA_HPT3X2N
476 tristate "HPT 371N/372N/302N PATA support"
477 depends on PCI
478 help
479 This option enables support for the N variant HPT PATA
480 controllers via the new ATA layer.
481
482 If unsure, say N.
483
484config PATA_HPT3X3
485 tristate "HPT 343/363 PATA support"
486 depends on PCI
487 help
488 This option enables support for the HPT 343/363
489 PATA controllers via the new ATA layer
490
491 If unsure, say N.
492
493config PATA_HPT3X3_DMA
494 bool "HPT 343/363 DMA support"
495 depends on PATA_HPT3X3
496 help
497 This option enables DMA support for the HPT343/363
498 controllers. Enable with care as there are still some
499 problems with DMA on this chipset.
500
501config PATA_ICSIDE
502 tristate "Acorn ICS PATA support"
503 depends on ARM && ARCH_ACORN
504 help
505 On Acorn systems, say Y here if you wish to use the ICS PATA
506 interface card. This is not required for ICS partition support.
507 If you are unsure, say N to this.
508
509config PATA_IMX
510 tristate "PATA support for Freescale iMX"
511 depends on ARCH_MXC
512 help
513 This option enables support for the PATA host available on Freescale
514 iMX SoCs.
515
516 If unsure, say N.
517
518config PATA_IT8213
519 tristate "IT8213 PATA support (Experimental)"
520 depends on PCI
521 help
522 This option enables support for the ITE 821 PATA
523 controllers via the new ATA layer.
524
525 If unsure, say N.
526
527config PATA_IT821X
528 tristate "IT8211/2 PATA support"
529 depends on PCI
530 help
531 This option enables support for the ITE 8211 and 8212
532 PATA controllers via the new ATA layer, including RAID
533 mode.
534
535 If unsure, say N.
536
537config PATA_JMICRON
538 tristate "JMicron PATA support"
539 depends on PCI
540 help
541 Enable support for the JMicron IDE controller, via the new
542 ATA layer.
543
544 If unsure, say N.
545
546config PATA_MACIO
547 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
548 depends on PPC_PMAC
549 help
550 Most IDE capable PowerMacs have IDE busses driven by a variant
551 of this controller which is part of the Apple chipset used on
552 most PowerMac models. Some models have multiple busses using
553 different chipsets, though generally, MacIO is one of them.
554
555config PATA_MARVELL
556 tristate "Marvell PATA support via legacy mode"
557 depends on PCI
558 help
559 This option enables limited support for the Marvell 88SE61xx ATA
560 controllers. If you wish to use only the SATA ports then select
561 the AHCI driver alone. If you wish to the use the PATA port or
562 both SATA and PATA include this driver.
563
564 If unsure, say N.
565
566config PATA_MPC52xx
567 tristate "Freescale MPC52xx SoC internal IDE"
568 depends on PPC_MPC52xx && PPC_BESTCOMM
569 select PPC_BESTCOMM_ATA
570 help
571 This option enables support for integrated IDE controller
572 of the Freescale MPC52xx SoC.
573
574 If unsure, say N.
575
576config PATA_NETCELL
577 tristate "NETCELL Revolution RAID support"
578 depends on PCI
579 help
580 This option enables support for the Netcell Revolution RAID
581 PATA controller.
582
583 If unsure, say N.
584
585config PATA_NINJA32
586 tristate "Ninja32/Delkin Cardbus ATA support"
587 depends on PCI
588 help
589 This option enables support for the Ninja32, Delkin and
590 possibly other brands of Cardbus ATA adapter
591
592 If unsure, say N.
593
594config PATA_NS87415
595 tristate "Nat Semi NS87415 PATA support"
596 depends on PCI
597 help
598 This option enables support for the National Semiconductor
599 NS87415 PCI-IDE controller.
600
601 If unsure, say N.
602
603config PATA_OLDPIIX
604 tristate "Intel PATA old PIIX support"
605 depends on PCI
606 help
607 This option enables support for early PIIX PATA support.
608
609 If unsure, say N.
610
611config PATA_OPTIDMA
612 tristate "OPTI FireStar PATA support (Very Experimental)"
613 depends on PCI
614 help
615 This option enables DMA/PIO support for the later OPTi
616 controllers found on some old motherboards and in some
617 laptops.
618
619 If unsure, say N.
620
621config PATA_PDC2027X
622 tristate "Promise PATA 2027x support"
623 depends on PCI
624 help
625 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
626
627 If unsure, say N.
628
629config PATA_PDC_OLD
630 tristate "Older Promise PATA controller support"
631 depends on PCI
632 help
633 This option enables support for the Promise 20246, 20262, 20263,
634 20265 and 20267 adapters.
635
636 If unsure, say N.
637
638config PATA_RADISYS
639 tristate "RADISYS 82600 PATA support (Experimental)"
640 depends on PCI
641 help
642 This option enables support for the RADISYS 82600
643 PATA controllers via the new ATA layer
644
645 If unsure, say N.
646
647config PATA_RDC
648 tristate "RDC PATA support"
649 depends on PCI
650 help
651 This option enables basic support for the later RDC PATA controllers
652 controllers via the new ATA layer. For the RDC 1010, you need to
653 enable the IT821X driver instead.
654
655 If unsure, say N.
656
657config PATA_SC1200
658 tristate "SC1200 PATA support"
659 depends on PCI
660 help
661 This option enables support for the NatSemi/AMD SC1200 SoC
662 companion chip used with the Geode processor family.
663
664 If unsure, say N.
665
666config PATA_SCC
667 tristate "Toshiba's Cell Reference Set IDE support"
668 depends on PCI && PPC_CELLEB
669 help
670 This option enables support for the built-in IDE controller on
671 Toshiba Cell Reference Board.
672
673 If unsure, say N.
674
675config PATA_SCH
676 tristate "Intel SCH PATA support"
677 depends on PCI
678 help
679 This option enables support for Intel SCH PATA on the Intel
680 SCH (US15W, US15L, UL11L) series host controllers.
681
682 If unsure, say N.
683
684config PATA_SERVERWORKS
685 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
686 depends on PCI
687 help
688 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
689 HT1000 PATA controllers, via the new ATA layer.
690
691 If unsure, say N.
692
693config PATA_SIL680
694 tristate "CMD / Silicon Image 680 PATA support"
695 depends on PCI
696 help
697 This option enables support for CMD / Silicon Image 680 PATA.
698
699 If unsure, say N.
700
701config PATA_SIS
702 tristate "SiS PATA support"
703 depends on PCI
704 help
705 This option enables support for SiS PATA controllers
706
707 If unsure, say N.
708
709config PATA_TOSHIBA
710 tristate "Toshiba Piccolo support (Experimental)"
711 depends on PCI
712 help
713 Support for the Toshiba Piccolo controllers. Currently only the
714 primary channel is supported by this driver.
715
716 If unsure, say N.
717
718config PATA_TRIFLEX
719 tristate "Compaq Triflex PATA support"
720 depends on PCI
721 help
722 Enable support for the Compaq 'Triflex' IDE controller as found
723 on many Compaq Pentium-Pro systems, via the new ATA layer.
724
725 If unsure, say N.
726
727config PATA_VIA
728 tristate "VIA PATA support"
729 depends on PCI
730 help
731 This option enables support for the VIA PATA interfaces
732 found on the many VIA chipsets.
733
734 If unsure, say N.
735
736config PATA_PXA
737 tristate "PXA DMA-capable PATA support"
738 depends on ARCH_PXA
739 help
740 This option enables support for harddrive attached to PXA CPU's bus.
741
742 NOTE: This driver utilizes PXA DMA controller, in case your hardware
743 is not capable of doing MWDMA, use pata_platform instead.
744
745 If unsure, say N.
746
747config PATA_WINBOND
748 tristate "Winbond SL82C105 PATA support"
749 depends on PCI
750 help
751 This option enables support for SL82C105 PATA devices found in the
752 Netwinder and some other systems
753
754 If unsure, say N.
755
756endif # ATA_BMDMA
757
758comment "PIO-only SFF controllers"
759
760config PATA_AT32
761 tristate "Atmel AVR32 PATA support (Experimental)"
762 depends on AVR32 && PLATFORM_AT32AP
763 help
764 This option enables support for the IDE devices on the
765 Atmel AT32AP platform.
766
767 If unsure, say N.
768
769config PATA_AT91
770 tristate "PATA support for AT91SAM9260"
771 depends on ARM && ARCH_AT91
772 help
773 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
774
775 If unsure, say N.
776
777config PATA_CMD640_PCI
778 tristate "CMD640 PCI PATA support (Experimental)"
779 depends on PCI
780 help
781 This option enables support for the CMD640 PCI IDE
782 interface chip. Only the primary channel is currently
783 supported.
784
785 If unsure, say N.
786
787config PATA_ISAPNP
788 tristate "ISA Plug and Play PATA support"
789 depends on ISAPNP
790 help
791 This option enables support for ISA plug & play ATA
792 controllers such as those found on old soundcards.
793
794 If unsure, say N.
795
796config PATA_IXP4XX_CF
797 tristate "IXP4XX Compact Flash support"
798 depends on ARCH_IXP4XX
799 help
800 This option enables support for a Compact Flash connected on
801 the ixp4xx expansion bus. This driver had been written for
802 Loft/Avila boards in mind but can work with others.
803
804 If unsure, say N.
805
806config PATA_MPIIX
807 tristate "Intel PATA MPIIX support"
808 depends on PCI
809 help
810 This option enables support for MPIIX PATA support.
811
812 If unsure, say N.
813
814config PATA_NS87410
815 tristate "Nat Semi NS87410 PATA support"
816 depends on PCI
817 help
818 This option enables support for the National Semiconductor
819 NS87410 PCI-IDE controller.
820
821 If unsure, say N.
822
823config PATA_OPTI
824 tristate "OPTI621/6215 PATA support (Very Experimental)"
825 depends on PCI
826 help
827 This option enables full PIO support for the early Opti ATA
828 controllers found on some old motherboards.
829
830 If unsure, say N.
831
832config PATA_PALMLD
833 tristate "Palm LifeDrive PATA support"
834 depends on MACH_PALMLD
835 help
836 This option enables support for Palm LifeDrive's internal ATA
837 port via the new ATA layer.
838
839 If unsure, say N.
840
841config PATA_PCMCIA
842 tristate "PCMCIA PATA support"
843 depends on PCMCIA
844 help
845 This option enables support for PCMCIA ATA interfaces, including
846 compact flash card adapters via the new ATA layer.
847
848 If unsure, say N.
849
850config PATA_PLATFORM
851 tristate "Generic platform device PATA support"
852 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
853 help
854 This option enables support for generic directly connected ATA
855 devices commonly found on embedded systems.
856
857 If unsure, say N.
858
859config PATA_OF_PLATFORM
860 tristate "OpenFirmware platform device PATA support"
861 depends on PATA_PLATFORM && OF
862 help
863 This option enables support for generic directly connected ATA
864 devices commonly found on embedded systems with OpenFirmware
865 bindings.
866
867 If unsure, say N.
868
869config PATA_QDI
870 tristate "QDI VLB PATA support"
871 depends on ISA
872 select PATA_LEGACY
873 help
874 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
875
876config PATA_RB532
877 tristate "RouterBoard 532 PATA CompactFlash support"
878 depends on MIKROTIK_RB532
879 help
880 This option enables support for the RouterBoard 532
881 PATA CompactFlash controller.
882
883 If unsure, say N.
884
885config PATA_RZ1000
886 tristate "PC Tech RZ1000 PATA support"
887 depends on PCI
888 help
889 This option enables basic support for the PC Tech RZ1000/1
890 PATA controllers via the new ATA layer
891
892 If unsure, say N.
893
894config PATA_SAMSUNG_CF
895 tristate "Samsung SoC PATA support"
896 depends on SAMSUNG_DEV_IDE
897 help
898 This option enables basic support for Samsung's S3C/S5P board
899 PATA controllers via the new ATA layer
900
901 If unsure, say N.
902
903config PATA_WINBOND_VLB
904 tristate "Winbond W83759A VLB PATA support (Experimental)"
905 depends on ISA
906 select PATA_LEGACY
907 help
908 Support for the Winbond W83759A controller on Vesa Local Bus
909 systems.
910
911comment "Generic fallback / legacy drivers"
912
913config PATA_ACPI
914 tristate "ACPI firmware driver for PATA"
915 depends on ATA_ACPI && ATA_BMDMA
916 help
917 This option enables an ACPI method driver which drives
918 motherboard PATA controller interfaces through the ACPI
919 firmware in the BIOS. This driver can sometimes handle
920 otherwise unsupported hardware.
921
922config ATA_GENERIC
923 tristate "Generic ATA support"
924 depends on PCI && ATA_BMDMA
925 help
926 This option enables support for generic BIOS configured
927 ATA controllers via the new ATA layer
928
929 If unsure, say N.
930
931config PATA_LEGACY
932 tristate "Legacy ISA PATA support (Experimental)"
933 depends on (ISA || PCI)
934 help
935 This option enables support for ISA/VLB/PCI bus legacy PATA
936 ports and allows them to be accessed via the new ATA layer.
937
938 If unsure, say N.
939
940endif # ATA_SFF
941endif # ATA