Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/* atmdev.h - ATM device driver declarations and various related items */
2
3/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
4
5
6#ifndef LINUX_ATMDEV_H
7#define LINUX_ATMDEV_H
8
9
10#include <linux/atmapi.h>
11#include <linux/atm.h>
12#include <linux/atmioc.h>
13
14
15#define ESI_LEN 6
16
17#define ATM_OC3_PCR (155520000/270*260/8/53)
18 /* OC3 link rate: 155520000 bps
19 SONET overhead: /270*260 (9 section, 1 path)
20 bits per cell: /8/53
21 max cell rate: 353207.547 cells/sec */
22#define ATM_25_PCR ((25600000/8-8000)/54)
23 /* 25 Mbps ATM cell rate (59111) */
24#define ATM_OC12_PCR (622080000/1080*1040/8/53)
25 /* OC12 link rate: 622080000 bps
26 SONET overhead: /1080*1040
27 bits per cell: /8/53
28 max cell rate: 1412830.188 cells/sec */
29#define ATM_DS3_PCR (8000*12)
30 /* DS3: 12 cells in a 125 usec time slot */
31
32
33#define __AAL_STAT_ITEMS \
34 __HANDLE_ITEM(tx); /* TX okay */ \
35 __HANDLE_ITEM(tx_err); /* TX errors */ \
36 __HANDLE_ITEM(rx); /* RX okay */ \
37 __HANDLE_ITEM(rx_err); /* RX errors */ \
38 __HANDLE_ITEM(rx_drop); /* RX out of memory */
39
40struct atm_aal_stats {
41#define __HANDLE_ITEM(i) int i
42 __AAL_STAT_ITEMS
43#undef __HANDLE_ITEM
44};
45
46
47struct atm_dev_stats {
48 struct atm_aal_stats aal0;
49 struct atm_aal_stats aal34;
50 struct atm_aal_stats aal5;
51} __ATM_API_ALIGN;
52
53
54#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
55 /* get link rate */
56#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
57 /* get interface names (numbers) */
58#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
59 /* get interface type name */
60#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
61 /* get interface ESI */
62#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
63 /* get itf's local ATM addr. list */
64#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
65 /* reset itf's ATM address list */
66#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
67 /* add a local ATM address */
68#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
69 /* remove a local ATM address */
70#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
71 /* get connection identifier range */
72#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
73 /* set connection identifier range */
74#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
75 /* set interface ESI */
76#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
77 /* force interface ESI */
78#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
79 /* register a LECS address */
80#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
81 /* unregister a LECS address */
82#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
83 /* retrieve LECS address(es) */
84
85#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
86 /* get AAL layer statistics */
87#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
88 /* get AAL layer statistics and zero */
89#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
90 /* get loopback mode */
91#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
92 /* set loopback mode */
93#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
94 /* query supported loopback modes */
95#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
96 /* enable or disable single-copy */
97#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
98 /* set backend handler */
99#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
100 /* use backend to make new if */
101#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
102 /* add party to p2mp call */
103#ifdef CONFIG_COMPAT
104/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
105#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
106#endif
107#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
108 /* drop party from p2mp call */
109
110/*
111 * These are backend handkers that can be set via the ATM_SETBACKEND call
112 * above. In the future we may support dynamic loading of these - for now,
113 * they're just being used to share the ATMIOC_BACKEND ioctls
114 */
115#define ATM_BACKEND_RAW 0
116#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
117#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
118
119/* for ATM_GETTYPE */
120#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
121
122/*
123 * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
124 */
125
126/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
127#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
128#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
129#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
130/* RESERVED 4 loop back on PHY side ---' */
131#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
132#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
133
134/* Direction of loopback */
135#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
136#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
137
138#define __ATM_LM_XTLOC(n) ((n) & 0xff)
139#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
140
141#define ATM_LM_NONE 0 /* no loopback */
142
143#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
144#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
145#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
146#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
147
148#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
149#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
150#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
151#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
152
153/*
154 * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
155 * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
156 */
157
158
159struct atm_iobuf {
160 int length;
161 void __user *buffer;
162};
163
164/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
165
166#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
167
168struct atm_cirange {
169 signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
170 signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
171};
172
173/* for ATM_SETSC; actually taken from the ATM_VF number space */
174
175#define ATM_SC_RX 1024 /* enable RX single-copy */
176#define ATM_SC_TX 2048 /* enable TX single-copy */
177
178#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
179 anyway */
180
181/* MF: change_qos (Modify) flags */
182
183#define ATM_MF_IMMED 1 /* Block until change is effective */
184#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
185#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
186#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
187#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
188#define ATM_MF_BWD 32 /* Set the backward direction parameters */
189
190#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
191 ATM_MF_DEC_SHP | ATM_MF_BWD)
192
193/*
194 * ATM_VS_* are used to express VC state in a human-friendly way.
195 */
196
197#define ATM_VS_IDLE 0 /* VC is not used */
198#define ATM_VS_CONNECTED 1 /* VC is connected */
199#define ATM_VS_CLOSING 2 /* VC is closing */
200#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
201#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
202#define ATM_VS_BOUND 5 /* VC is bound */
203
204#define ATM_VS2TXT_MAP \
205 "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
206
207#define ATM_VF2TXT_MAP \
208 "ADDR", "READY", "PARTIAL", "REGIS", \
209 "RELEASED", "HASQOS", "LISTEN", "META", \
210 "256", "512", "1024", "2048", \
211 "SESSION", "HASSAP", "BOUND", "CLOSE"
212
213
214#ifdef __KERNEL__
215
216#include <linux/wait.h> /* wait_queue_head_t */
217#include <linux/time.h> /* struct timeval */
218#include <linux/net.h>
219#include <linux/bug.h>
220#include <linux/skbuff.h> /* struct sk_buff */
221#include <linux/uio.h>
222#include <net/sock.h>
223#include <linux/atomic.h>
224
225#ifdef CONFIG_PROC_FS
226#include <linux/proc_fs.h>
227
228extern struct proc_dir_entry *atm_proc_root;
229#endif
230
231#ifdef CONFIG_COMPAT
232#include <linux/compat.h>
233struct compat_atm_iobuf {
234 int length;
235 compat_uptr_t buffer;
236};
237#endif
238
239struct k_atm_aal_stats {
240#define __HANDLE_ITEM(i) atomic_t i
241 __AAL_STAT_ITEMS
242#undef __HANDLE_ITEM
243};
244
245
246struct k_atm_dev_stats {
247 struct k_atm_aal_stats aal0;
248 struct k_atm_aal_stats aal34;
249 struct k_atm_aal_stats aal5;
250};
251
252struct device;
253
254enum {
255 ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared
256 by device driver. */
257 ATM_VF_READY, /* VC is ready to transfer data. Set by device
258 driver, cleared by anybody. */
259 ATM_VF_PARTIAL, /* resources are bound to PVC (partial PVC
260 setup), controlled by socket layer */
261 ATM_VF_REGIS, /* registered with demon, controlled by SVC
262 socket layer */
263 ATM_VF_BOUND, /* local SAP is set, controlled by SVC socket
264 layer */
265 ATM_VF_RELEASED, /* demon has indicated/requested release,
266 controlled by SVC socket layer */
267 ATM_VF_HASQOS, /* QOS parameters have been set */
268 ATM_VF_LISTEN, /* socket is used for listening */
269 ATM_VF_META, /* SVC socket isn't used for normal data
270 traffic and doesn't depend on signaling
271 to be available */
272 ATM_VF_SESSION, /* VCC is p2mp session control descriptor */
273 ATM_VF_HASSAP, /* SAP has been set */
274 ATM_VF_CLOSE, /* asynchronous close - treat like VF_RELEASED*/
275 ATM_VF_WAITING, /* waiting for reply from sigd */
276 ATM_VF_IS_CLIP, /* in use by CLIP protocol */
277};
278
279
280#define ATM_VF2VS(flags) \
281 (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
282 test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
283 test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
284 test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
285 test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
286
287
288enum {
289 ATM_DF_REMOVED, /* device was removed from atm_devs list */
290};
291
292
293#define ATM_PHY_SIG_LOST 0 /* no carrier/light */
294#define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */
295#define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */
296
297#define ATM_ATMOPT_CLP 1 /* set CLP bit */
298
299struct atm_vcc {
300 /* struct sock has to be the first member of atm_vcc */
301 struct sock sk;
302 unsigned long flags; /* VCC flags (ATM_VF_*) */
303 short vpi; /* VPI and VCI (types must be equal */
304 /* with sockaddr) */
305 int vci;
306 unsigned long aal_options; /* AAL layer options */
307 unsigned long atm_options; /* ATM layer options */
308 struct atm_dev *dev; /* device back pointer */
309 struct atm_qos qos; /* QOS */
310 struct atm_sap sap; /* SAP */
311 void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
312 void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
313 int (*push_oam)(struct atm_vcc *vcc,void *cell);
314 int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
315 void *dev_data; /* per-device data */
316 void *proto_data; /* per-protocol data */
317 struct k_atm_aal_stats *stats; /* pointer to AAL stats group */
318 /* SVC part --- may move later ------------------------------------- */
319 short itf; /* interface number */
320 struct sockaddr_atmsvc local;
321 struct sockaddr_atmsvc remote;
322 /* Multipoint part ------------------------------------------------- */
323 struct atm_vcc *session; /* session VCC descriptor */
324 /* Other stuff ----------------------------------------------------- */
325 void *user_back; /* user backlink - not touched by */
326 /* native ATM stack. Currently used */
327 /* by CLIP and sch_atm. */
328};
329
330static inline struct atm_vcc *atm_sk(struct sock *sk)
331{
332 return (struct atm_vcc *)sk;
333}
334
335static inline struct atm_vcc *ATM_SD(struct socket *sock)
336{
337 return atm_sk(sock->sk);
338}
339
340static inline struct sock *sk_atm(struct atm_vcc *vcc)
341{
342 return (struct sock *)vcc;
343}
344
345struct atm_dev_addr {
346 struct sockaddr_atmsvc addr; /* ATM address */
347 struct list_head entry; /* next address */
348};
349
350enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS };
351
352struct atm_dev {
353 const struct atmdev_ops *ops; /* device operations; NULL if unused */
354 const struct atmphy_ops *phy; /* PHY operations, may be undefined */
355 /* (NULL) */
356 const char *type; /* device type name */
357 int number; /* device index */
358 void *dev_data; /* per-device data */
359 void *phy_data; /* private PHY date */
360 unsigned long flags; /* device flags (ATM_DF_*) */
361 struct list_head local; /* local ATM addresses */
362 struct list_head lecs; /* LECS ATM addresses learned via ILMI */
363 unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */
364 struct atm_cirange ci_range; /* VPI/VCI range */
365 struct k_atm_dev_stats stats; /* statistics */
366 char signal; /* signal status (ATM_PHY_SIG_*) */
367 int link_rate; /* link rate (default: OC3) */
368 atomic_t refcnt; /* reference count */
369 spinlock_t lock; /* protect internal members */
370#ifdef CONFIG_PROC_FS
371 struct proc_dir_entry *proc_entry; /* proc entry */
372 char *proc_name; /* proc entry name */
373#endif
374 struct device class_dev; /* sysfs device */
375 struct list_head dev_list; /* linkage */
376};
377
378
379/* OF: send_Oam Flags */
380
381#define ATM_OF_IMMED 1 /* Attempt immediate delivery */
382#define ATM_OF_INRATE 2 /* Attempt in-rate delivery */
383
384
385/*
386 * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
387 */
388
389struct atmdev_ops { /* only send is required */
390 void (*dev_close)(struct atm_dev *dev);
391 int (*open)(struct atm_vcc *vcc);
392 void (*close)(struct atm_vcc *vcc);
393 int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
394#ifdef CONFIG_COMPAT
395 int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd,
396 void __user *arg);
397#endif
398 int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
399 void __user *optval,int optlen);
400 int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
401 void __user *optval,unsigned int optlen);
402 int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
403 int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
404 void (*phy_put)(struct atm_dev *dev,unsigned char value,
405 unsigned long addr);
406 unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
407 int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
408 int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
409 struct module *owner;
410};
411
412struct atmphy_ops {
413 int (*start)(struct atm_dev *dev);
414 int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
415 void (*interrupt)(struct atm_dev *dev);
416 int (*stop)(struct atm_dev *dev);
417};
418
419struct atm_skb_data {
420 struct atm_vcc *vcc; /* ATM VCC */
421 unsigned long atm_options; /* ATM layer options */
422};
423
424#define VCC_HTABLE_SIZE 32
425
426extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
427extern rwlock_t vcc_sklist_lock;
428
429#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
430
431struct atm_dev *atm_dev_register(const char *type, struct device *parent,
432 const struct atmdev_ops *ops,
433 int number, /* -1 == pick first available */
434 unsigned long *flags);
435struct atm_dev *atm_dev_lookup(int number);
436void atm_dev_deregister(struct atm_dev *dev);
437
438/* atm_dev_signal_change
439 *
440 * Propagate lower layer signal change in atm_dev->signal to netdevice.
441 * The event will be sent via a notifier call chain.
442 */
443void atm_dev_signal_change(struct atm_dev *dev, char signal);
444
445void vcc_insert_socket(struct sock *sk);
446
447void atm_dev_release_vccs(struct atm_dev *dev);
448
449
450static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
451{
452 atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
453}
454
455
456static inline void atm_return(struct atm_vcc *vcc,int truesize)
457{
458 atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
459}
460
461
462static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
463{
464 return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
465 sk_atm(vcc)->sk_sndbuf;
466}
467
468
469static inline void atm_dev_hold(struct atm_dev *dev)
470{
471 atomic_inc(&dev->refcnt);
472}
473
474
475static inline void atm_dev_put(struct atm_dev *dev)
476{
477 if (atomic_dec_and_test(&dev->refcnt)) {
478 BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
479 if (dev->ops->dev_close)
480 dev->ops->dev_close(dev);
481 put_device(&dev->class_dev);
482 }
483}
484
485
486int atm_charge(struct atm_vcc *vcc,int truesize);
487struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
488 gfp_t gfp_flags);
489int atm_pcr_goal(const struct atm_trafprm *tp);
490
491void vcc_release_async(struct atm_vcc *vcc, int reply);
492
493struct atm_ioctl {
494 struct module *owner;
495 /* A module reference is kept if appropriate over this call.
496 * Return -ENOIOCTLCMD if you don't handle it. */
497 int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
498 struct list_head list;
499};
500
501/**
502 * register_atm_ioctl - register handler for ioctl operations
503 *
504 * Special (non-device) handlers of ioctl's should
505 * register here. If you're a normal device, you should
506 * set .ioctl in your atmdev_ops instead.
507 */
508void register_atm_ioctl(struct atm_ioctl *);
509
510/**
511 * deregister_atm_ioctl - remove the ioctl handler
512 */
513void deregister_atm_ioctl(struct atm_ioctl *);
514
515
516/* register_atmdevice_notifier - register atm_dev notify events
517 *
518 * Clients like br2684 will register notify events
519 * Currently we notify of signal found/lost
520 */
521int register_atmdevice_notifier(struct notifier_block *nb);
522void unregister_atmdevice_notifier(struct notifier_block *nb);
523
524#endif /* __KERNEL__ */
525
526#endif