Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v3.6-rc1 854 lines 21 kB view raw
1/* 2 * mac80211 glue code for mac80211 Prism54 drivers 3 * 4 * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> 5 * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de> 6 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> 7 * 8 * Based on: 9 * - the islsm (softmac prism54) driver, which is: 10 * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. 11 * - stlc45xx driver 12 * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). 13 * 14 * This program is free software; you can redistribute it and/or modify 15 * it under the terms of the GNU General Public License version 2 as 16 * published by the Free Software Foundation. 17 */ 18 19#include <linux/init.h> 20#include <linux/slab.h> 21#include <linux/firmware.h> 22#include <linux/etherdevice.h> 23#include <linux/module.h> 24 25#include <net/mac80211.h> 26 27#include "p54.h" 28#include "lmac.h" 29 30static bool modparam_nohwcrypt; 31module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); 32MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); 33MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); 34MODULE_DESCRIPTION("Softmac Prism54 common code"); 35MODULE_LICENSE("GPL"); 36MODULE_ALIAS("prism54common"); 37 38static int p54_sta_add_remove(struct ieee80211_hw *hw, 39 struct ieee80211_vif *vif, 40 struct ieee80211_sta *sta) 41{ 42 struct p54_common *priv = hw->priv; 43 44 /* 45 * Notify the firmware that we don't want or we don't 46 * need to buffer frames for this station anymore. 47 */ 48 49 p54_sta_unlock(priv, sta->addr); 50 51 return 0; 52} 53 54static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif, 55 enum sta_notify_cmd notify_cmd, 56 struct ieee80211_sta *sta) 57{ 58 struct p54_common *priv = dev->priv; 59 60 switch (notify_cmd) { 61 case STA_NOTIFY_AWAKE: 62 /* update the firmware's filter table */ 63 p54_sta_unlock(priv, sta->addr); 64 break; 65 default: 66 break; 67 } 68} 69 70static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, 71 bool set) 72{ 73 struct p54_common *priv = dev->priv; 74 75 return p54_update_beacon_tim(priv, sta->aid, set); 76} 77 78u8 *p54_find_ie(struct sk_buff *skb, u8 ie) 79{ 80 struct ieee80211_mgmt *mgmt = (void *)skb->data; 81 u8 *pos, *end; 82 83 if (skb->len <= sizeof(mgmt)) 84 return NULL; 85 86 pos = (u8 *)mgmt->u.beacon.variable; 87 end = skb->data + skb->len; 88 while (pos < end) { 89 if (pos + 2 + pos[1] > end) 90 return NULL; 91 92 if (pos[0] == ie) 93 return pos; 94 95 pos += 2 + pos[1]; 96 } 97 return NULL; 98} 99 100static int p54_beacon_format_ie_tim(struct sk_buff *skb) 101{ 102 /* 103 * the good excuse for this mess is ... the firmware. 104 * The dummy TIM MUST be at the end of the beacon frame, 105 * because it'll be overwritten! 106 */ 107 u8 *tim; 108 u8 dtim_len; 109 u8 dtim_period; 110 u8 *next; 111 112 tim = p54_find_ie(skb, WLAN_EID_TIM); 113 if (!tim) 114 return 0; 115 116 dtim_len = tim[1]; 117 dtim_period = tim[3]; 118 next = tim + 2 + dtim_len; 119 120 if (dtim_len < 3) 121 return -EINVAL; 122 123 memmove(tim, next, skb_tail_pointer(skb) - next); 124 tim = skb_tail_pointer(skb) - (dtim_len + 2); 125 126 /* add the dummy at the end */ 127 tim[0] = WLAN_EID_TIM; 128 tim[1] = 3; 129 tim[2] = 0; 130 tim[3] = dtim_period; 131 tim[4] = 0; 132 133 if (dtim_len > 3) 134 skb_trim(skb, skb->len - (dtim_len - 3)); 135 136 return 0; 137} 138 139static int p54_beacon_update(struct p54_common *priv, 140 struct ieee80211_vif *vif) 141{ 142 struct sk_buff *beacon; 143 int ret; 144 145 beacon = ieee80211_beacon_get(priv->hw, vif); 146 if (!beacon) 147 return -ENOMEM; 148 ret = p54_beacon_format_ie_tim(beacon); 149 if (ret) 150 return ret; 151 152 /* 153 * During operation, the firmware takes care of beaconing. 154 * The driver only needs to upload a new beacon template, once 155 * the template was changed by the stack or userspace. 156 * 157 * LMAC API 3.2.2 also specifies that the driver does not need 158 * to cancel the old beacon template by hand, instead the firmware 159 * will release the previous one through the feedback mechanism. 160 */ 161 p54_tx_80211(priv->hw, beacon); 162 priv->tsf_high32 = 0; 163 priv->tsf_low32 = 0; 164 165 return 0; 166} 167 168static int p54_start(struct ieee80211_hw *dev) 169{ 170 struct p54_common *priv = dev->priv; 171 int err; 172 173 mutex_lock(&priv->conf_mutex); 174 err = priv->open(dev); 175 if (err) 176 goto out; 177 P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47); 178 P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94); 179 P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0); 180 P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0); 181 err = p54_set_edcf(priv); 182 if (err) 183 goto out; 184 185 memset(priv->bssid, ~0, ETH_ALEN); 186 priv->mode = NL80211_IFTYPE_MONITOR; 187 err = p54_setup_mac(priv); 188 if (err) { 189 priv->mode = NL80211_IFTYPE_UNSPECIFIED; 190 goto out; 191 } 192 193 ieee80211_queue_delayed_work(dev, &priv->work, 0); 194 195 priv->softled_state = 0; 196 err = p54_set_leds(priv); 197 198out: 199 mutex_unlock(&priv->conf_mutex); 200 return err; 201} 202 203static void p54_stop(struct ieee80211_hw *dev) 204{ 205 struct p54_common *priv = dev->priv; 206 int i; 207 208 priv->mode = NL80211_IFTYPE_UNSPECIFIED; 209 priv->softled_state = 0; 210 cancel_delayed_work_sync(&priv->work); 211 mutex_lock(&priv->conf_mutex); 212 p54_set_leds(priv); 213 priv->stop(dev); 214 skb_queue_purge(&priv->tx_pending); 215 skb_queue_purge(&priv->tx_queue); 216 for (i = 0; i < P54_QUEUE_NUM; i++) { 217 priv->tx_stats[i].count = 0; 218 priv->tx_stats[i].len = 0; 219 } 220 221 priv->beacon_req_id = cpu_to_le32(0); 222 priv->tsf_high32 = priv->tsf_low32 = 0; 223 mutex_unlock(&priv->conf_mutex); 224} 225 226static int p54_add_interface(struct ieee80211_hw *dev, 227 struct ieee80211_vif *vif) 228{ 229 struct p54_common *priv = dev->priv; 230 int err; 231 232 vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER; 233 234 mutex_lock(&priv->conf_mutex); 235 if (priv->mode != NL80211_IFTYPE_MONITOR) { 236 mutex_unlock(&priv->conf_mutex); 237 return -EOPNOTSUPP; 238 } 239 240 priv->vif = vif; 241 242 switch (vif->type) { 243 case NL80211_IFTYPE_STATION: 244 case NL80211_IFTYPE_ADHOC: 245 case NL80211_IFTYPE_AP: 246 case NL80211_IFTYPE_MESH_POINT: 247 priv->mode = vif->type; 248 break; 249 default: 250 mutex_unlock(&priv->conf_mutex); 251 return -EOPNOTSUPP; 252 } 253 254 memcpy(priv->mac_addr, vif->addr, ETH_ALEN); 255 err = p54_setup_mac(priv); 256 mutex_unlock(&priv->conf_mutex); 257 return err; 258} 259 260static void p54_remove_interface(struct ieee80211_hw *dev, 261 struct ieee80211_vif *vif) 262{ 263 struct p54_common *priv = dev->priv; 264 265 mutex_lock(&priv->conf_mutex); 266 priv->vif = NULL; 267 268 /* 269 * LMAC API 3.2.2 states that any active beacon template must be 270 * canceled by the driver before attempting a mode transition. 271 */ 272 if (le32_to_cpu(priv->beacon_req_id) != 0) { 273 p54_tx_cancel(priv, priv->beacon_req_id); 274 wait_for_completion_interruptible_timeout(&priv->beacon_comp, HZ); 275 } 276 priv->mode = NL80211_IFTYPE_MONITOR; 277 memset(priv->mac_addr, 0, ETH_ALEN); 278 memset(priv->bssid, 0, ETH_ALEN); 279 p54_setup_mac(priv); 280 mutex_unlock(&priv->conf_mutex); 281} 282 283static int p54_wait_for_stats(struct ieee80211_hw *dev) 284{ 285 struct p54_common *priv = dev->priv; 286 int ret; 287 288 priv->update_stats = true; 289 ret = p54_fetch_statistics(priv); 290 if (ret) 291 return ret; 292 293 ret = wait_for_completion_interruptible_timeout(&priv->stat_comp, HZ); 294 if (ret == 0) 295 return -ETIMEDOUT; 296 297 return 0; 298} 299 300static void p54_reset_stats(struct p54_common *priv) 301{ 302 struct ieee80211_channel *chan = priv->curchan; 303 304 if (chan) { 305 struct survey_info *info = &priv->survey[chan->hw_value]; 306 307 /* only reset channel statistics, don't touch .filled, etc. */ 308 info->channel_time = 0; 309 info->channel_time_busy = 0; 310 info->channel_time_tx = 0; 311 } 312 313 priv->update_stats = true; 314 priv->survey_raw.active = 0; 315 priv->survey_raw.cca = 0; 316 priv->survey_raw.tx = 0; 317} 318 319static int p54_config(struct ieee80211_hw *dev, u32 changed) 320{ 321 int ret = 0; 322 struct p54_common *priv = dev->priv; 323 struct ieee80211_conf *conf = &dev->conf; 324 325 mutex_lock(&priv->conf_mutex); 326 if (changed & IEEE80211_CONF_CHANGE_POWER) 327 priv->output_power = conf->power_level << 2; 328 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { 329 struct ieee80211_channel *oldchan; 330 WARN_ON(p54_wait_for_stats(dev)); 331 oldchan = priv->curchan; 332 priv->curchan = NULL; 333 ret = p54_scan(priv, P54_SCAN_EXIT, 0); 334 if (ret) { 335 priv->curchan = oldchan; 336 goto out; 337 } 338 /* 339 * TODO: Use the LM_SCAN_TRAP to determine the current 340 * operating channel. 341 */ 342 priv->curchan = priv->hw->conf.channel; 343 p54_reset_stats(priv); 344 WARN_ON(p54_fetch_statistics(priv)); 345 } 346 if (changed & IEEE80211_CONF_CHANGE_PS) { 347 WARN_ON(p54_wait_for_stats(dev)); 348 ret = p54_set_ps(priv); 349 if (ret) 350 goto out; 351 WARN_ON(p54_wait_for_stats(dev)); 352 } 353 if (changed & IEEE80211_CONF_CHANGE_IDLE) { 354 WARN_ON(p54_wait_for_stats(dev)); 355 ret = p54_setup_mac(priv); 356 if (ret) 357 goto out; 358 WARN_ON(p54_wait_for_stats(dev)); 359 } 360 361out: 362 mutex_unlock(&priv->conf_mutex); 363 return ret; 364} 365 366static u64 p54_prepare_multicast(struct ieee80211_hw *dev, 367 struct netdev_hw_addr_list *mc_list) 368{ 369 struct p54_common *priv = dev->priv; 370 struct netdev_hw_addr *ha; 371 int i; 372 373 BUILD_BUG_ON(ARRAY_SIZE(priv->mc_maclist) != 374 ARRAY_SIZE(((struct p54_group_address_table *)NULL)->mac_list)); 375 /* 376 * The first entry is reserved for the global broadcast MAC. 377 * Otherwise the firmware will drop it and ARP will no longer work. 378 */ 379 i = 1; 380 priv->mc_maclist_num = netdev_hw_addr_list_count(mc_list) + i; 381 netdev_hw_addr_list_for_each(ha, mc_list) { 382 memcpy(&priv->mc_maclist[i], ha->addr, ETH_ALEN); 383 i++; 384 if (i >= ARRAY_SIZE(priv->mc_maclist)) 385 break; 386 } 387 388 return 1; /* update */ 389} 390 391static void p54_configure_filter(struct ieee80211_hw *dev, 392 unsigned int changed_flags, 393 unsigned int *total_flags, 394 u64 multicast) 395{ 396 struct p54_common *priv = dev->priv; 397 398 *total_flags &= FIF_PROMISC_IN_BSS | 399 FIF_ALLMULTI | 400 FIF_OTHER_BSS; 401 402 priv->filter_flags = *total_flags; 403 404 if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) 405 p54_setup_mac(priv); 406 407 if (changed_flags & FIF_ALLMULTI || multicast) 408 p54_set_groupfilter(priv); 409} 410 411static int p54_conf_tx(struct ieee80211_hw *dev, 412 struct ieee80211_vif *vif, u16 queue, 413 const struct ieee80211_tx_queue_params *params) 414{ 415 struct p54_common *priv = dev->priv; 416 int ret; 417 418 mutex_lock(&priv->conf_mutex); 419 if (queue < dev->queues) { 420 P54_SET_QUEUE(priv->qos_params[queue], params->aifs, 421 params->cw_min, params->cw_max, params->txop); 422 ret = p54_set_edcf(priv); 423 } else 424 ret = -EINVAL; 425 mutex_unlock(&priv->conf_mutex); 426 return ret; 427} 428 429static void p54_work(struct work_struct *work) 430{ 431 struct p54_common *priv = container_of(work, struct p54_common, 432 work.work); 433 434 if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) 435 return ; 436 437 /* 438 * TODO: walk through tx_queue and do the following tasks 439 * 1. initiate bursts. 440 * 2. cancel stuck frames / reset the device if necessary. 441 */ 442 443 mutex_lock(&priv->conf_mutex); 444 WARN_ON_ONCE(p54_fetch_statistics(priv)); 445 mutex_unlock(&priv->conf_mutex); 446} 447 448static int p54_get_stats(struct ieee80211_hw *dev, 449 struct ieee80211_low_level_stats *stats) 450{ 451 struct p54_common *priv = dev->priv; 452 453 memcpy(stats, &priv->stats, sizeof(*stats)); 454 return 0; 455} 456 457static void p54_bss_info_changed(struct ieee80211_hw *dev, 458 struct ieee80211_vif *vif, 459 struct ieee80211_bss_conf *info, 460 u32 changed) 461{ 462 struct p54_common *priv = dev->priv; 463 464 mutex_lock(&priv->conf_mutex); 465 if (changed & BSS_CHANGED_BSSID) { 466 memcpy(priv->bssid, info->bssid, ETH_ALEN); 467 p54_setup_mac(priv); 468 } 469 470 if (changed & BSS_CHANGED_BEACON) { 471 p54_scan(priv, P54_SCAN_EXIT, 0); 472 p54_setup_mac(priv); 473 p54_beacon_update(priv, vif); 474 p54_set_edcf(priv); 475 } 476 477 if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) { 478 priv->use_short_slot = info->use_short_slot; 479 p54_set_edcf(priv); 480 } 481 if (changed & BSS_CHANGED_BASIC_RATES) { 482 if (dev->conf.channel->band == IEEE80211_BAND_5GHZ) 483 priv->basic_rate_mask = (info->basic_rates << 4); 484 else 485 priv->basic_rate_mask = info->basic_rates; 486 p54_setup_mac(priv); 487 if (priv->fw_var >= 0x500) 488 p54_scan(priv, P54_SCAN_EXIT, 0); 489 } 490 if (changed & BSS_CHANGED_ASSOC) { 491 if (info->assoc) { 492 priv->aid = info->aid; 493 priv->wakeup_timer = info->beacon_int * 494 info->dtim_period * 5; 495 p54_setup_mac(priv); 496 } else { 497 priv->wakeup_timer = 500; 498 priv->aid = 0; 499 } 500 } 501 502 mutex_unlock(&priv->conf_mutex); 503} 504 505static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, 506 struct ieee80211_vif *vif, struct ieee80211_sta *sta, 507 struct ieee80211_key_conf *key) 508{ 509 struct p54_common *priv = dev->priv; 510 int slot, ret = 0; 511 u8 algo = 0; 512 u8 *addr = NULL; 513 514 if (modparam_nohwcrypt) 515 return -EOPNOTSUPP; 516 517 mutex_lock(&priv->conf_mutex); 518 if (cmd == SET_KEY) { 519 switch (key->cipher) { 520 case WLAN_CIPHER_SUITE_TKIP: 521 if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL | 522 BR_DESC_PRIV_CAP_TKIP))) { 523 ret = -EOPNOTSUPP; 524 goto out_unlock; 525 } 526 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 527 algo = P54_CRYPTO_TKIPMICHAEL; 528 break; 529 case WLAN_CIPHER_SUITE_WEP40: 530 case WLAN_CIPHER_SUITE_WEP104: 531 if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) { 532 ret = -EOPNOTSUPP; 533 goto out_unlock; 534 } 535 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 536 algo = P54_CRYPTO_WEP; 537 break; 538 case WLAN_CIPHER_SUITE_CCMP: 539 if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) { 540 ret = -EOPNOTSUPP; 541 goto out_unlock; 542 } 543 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; 544 algo = P54_CRYPTO_AESCCMP; 545 break; 546 default: 547 ret = -EOPNOTSUPP; 548 goto out_unlock; 549 } 550 slot = bitmap_find_free_region(priv->used_rxkeys, 551 priv->rx_keycache_size, 0); 552 553 if (slot < 0) { 554 /* 555 * The device supports the chosen algorithm, but the 556 * firmware does not provide enough key slots to store 557 * all of them. 558 * But encryption offload for outgoing frames is always 559 * possible, so we just pretend that the upload was 560 * successful and do the decryption in software. 561 */ 562 563 /* mark the key as invalid. */ 564 key->hw_key_idx = 0xff; 565 goto out_unlock; 566 } 567 } else { 568 slot = key->hw_key_idx; 569 570 if (slot == 0xff) { 571 /* This key was not uploaded into the rx key cache. */ 572 573 goto out_unlock; 574 } 575 576 bitmap_release_region(priv->used_rxkeys, slot, 0); 577 algo = 0; 578 } 579 580 if (sta) 581 addr = sta->addr; 582 583 ret = p54_upload_key(priv, algo, slot, key->keyidx, 584 key->keylen, addr, key->key); 585 if (ret) { 586 bitmap_release_region(priv->used_rxkeys, slot, 0); 587 ret = -EOPNOTSUPP; 588 goto out_unlock; 589 } 590 591 key->hw_key_idx = slot; 592 593out_unlock: 594 mutex_unlock(&priv->conf_mutex); 595 return ret; 596} 597 598static int p54_get_survey(struct ieee80211_hw *dev, int idx, 599 struct survey_info *survey) 600{ 601 struct p54_common *priv = dev->priv; 602 struct ieee80211_channel *chan; 603 int err, tries; 604 bool in_use = false; 605 606 if (idx >= priv->chan_num) 607 return -ENOENT; 608 609#define MAX_TRIES 1 610 for (tries = 0; tries < MAX_TRIES; tries++) { 611 chan = priv->curchan; 612 if (chan && chan->hw_value == idx) { 613 mutex_lock(&priv->conf_mutex); 614 err = p54_wait_for_stats(dev); 615 mutex_unlock(&priv->conf_mutex); 616 if (err) 617 return err; 618 619 in_use = true; 620 } 621 622 memcpy(survey, &priv->survey[idx], sizeof(*survey)); 623 624 if (in_use) { 625 /* test if the reported statistics are valid. */ 626 if (survey->channel_time != 0) { 627 survey->filled |= SURVEY_INFO_IN_USE; 628 } else { 629 /* 630 * hw/fw has not accumulated enough sample sets. 631 * Wait for 100ms, this ought to be enough to 632 * to get at least one non-null set of channel 633 * usage statistics. 634 */ 635 msleep(100); 636 continue; 637 } 638 } 639 return 0; 640 } 641 return -ETIMEDOUT; 642#undef MAX_TRIES 643} 644 645static unsigned int p54_flush_count(struct p54_common *priv) 646{ 647 unsigned int total = 0, i; 648 649 BUILD_BUG_ON(P54_QUEUE_NUM > ARRAY_SIZE(priv->tx_stats)); 650 651 /* 652 * Because the firmware has the sole control over any frames 653 * in the P54_QUEUE_BEACON or P54_QUEUE_SCAN queues, they 654 * don't really count as pending or active. 655 */ 656 for (i = P54_QUEUE_MGMT; i < P54_QUEUE_NUM; i++) 657 total += priv->tx_stats[i].len; 658 return total; 659} 660 661static void p54_flush(struct ieee80211_hw *dev, bool drop) 662{ 663 struct p54_common *priv = dev->priv; 664 unsigned int total, i; 665 666 /* 667 * Currently, it wouldn't really matter if we wait for one second 668 * or 15 minutes. But once someone gets around and completes the 669 * TODOs [ancel stuck frames / reset device] in p54_work, it will 670 * suddenly make sense to wait that long. 671 */ 672 i = P54_STATISTICS_UPDATE * 2 / 20; 673 674 /* 675 * In this case no locking is required because as we speak the 676 * queues have already been stopped and no new frames can sneak 677 * up from behind. 678 */ 679 while ((total = p54_flush_count(priv) && i--)) { 680 /* waste time */ 681 msleep(20); 682 } 683 684 WARN(total, "tx flush timeout, unresponsive firmware"); 685} 686 687static void p54_set_coverage_class(struct ieee80211_hw *dev, u8 coverage_class) 688{ 689 struct p54_common *priv = dev->priv; 690 691 mutex_lock(&priv->conf_mutex); 692 /* support all coverage class values as in 802.11-2007 Table 7-27 */ 693 priv->coverage_class = clamp_t(u8, coverage_class, 0, 31); 694 p54_set_edcf(priv); 695 mutex_unlock(&priv->conf_mutex); 696} 697 698static const struct ieee80211_ops p54_ops = { 699 .tx = p54_tx_80211, 700 .start = p54_start, 701 .stop = p54_stop, 702 .add_interface = p54_add_interface, 703 .remove_interface = p54_remove_interface, 704 .set_tim = p54_set_tim, 705 .sta_notify = p54_sta_notify, 706 .sta_add = p54_sta_add_remove, 707 .sta_remove = p54_sta_add_remove, 708 .set_key = p54_set_key, 709 .config = p54_config, 710 .flush = p54_flush, 711 .bss_info_changed = p54_bss_info_changed, 712 .prepare_multicast = p54_prepare_multicast, 713 .configure_filter = p54_configure_filter, 714 .conf_tx = p54_conf_tx, 715 .get_stats = p54_get_stats, 716 .get_survey = p54_get_survey, 717 .set_coverage_class = p54_set_coverage_class, 718}; 719 720struct ieee80211_hw *p54_init_common(size_t priv_data_len) 721{ 722 struct ieee80211_hw *dev; 723 struct p54_common *priv; 724 725 dev = ieee80211_alloc_hw(priv_data_len, &p54_ops); 726 if (!dev) 727 return NULL; 728 729 priv = dev->priv; 730 priv->hw = dev; 731 priv->mode = NL80211_IFTYPE_UNSPECIFIED; 732 priv->basic_rate_mask = 0x15f; 733 spin_lock_init(&priv->tx_stats_lock); 734 skb_queue_head_init(&priv->tx_queue); 735 skb_queue_head_init(&priv->tx_pending); 736 dev->flags = IEEE80211_HW_RX_INCLUDES_FCS | 737 IEEE80211_HW_SIGNAL_DBM | 738 IEEE80211_HW_SUPPORTS_PS | 739 IEEE80211_HW_PS_NULLFUNC_STACK | 740 IEEE80211_HW_REPORTS_TX_ACK_STATUS; 741 742 dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | 743 BIT(NL80211_IFTYPE_ADHOC) | 744 BIT(NL80211_IFTYPE_AP) | 745 BIT(NL80211_IFTYPE_MESH_POINT); 746 747 dev->channel_change_time = 1000; /* TODO: find actual value */ 748 priv->beacon_req_id = cpu_to_le32(0); 749 priv->tx_stats[P54_QUEUE_BEACON].limit = 1; 750 priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1; 751 priv->tx_stats[P54_QUEUE_MGMT].limit = 3; 752 priv->tx_stats[P54_QUEUE_CAB].limit = 3; 753 priv->tx_stats[P54_QUEUE_DATA].limit = 5; 754 dev->queues = 1; 755 priv->noise = -94; 756 /* 757 * We support at most 8 tries no matter which rate they're at, 758 * we cannot support max_rates * max_rate_tries as we set it 759 * here, but setting it correctly to 4/2 or so would limit us 760 * artificially if the RC algorithm wants just two rates, so 761 * let's say 4/7, we'll redistribute it at TX time, see the 762 * comments there. 763 */ 764 dev->max_rates = 4; 765 dev->max_rate_tries = 7; 766 dev->extra_tx_headroom = sizeof(struct p54_hdr) + 4 + 767 sizeof(struct p54_tx_data); 768 769 /* 770 * For now, disable PS by default because it affects 771 * link stability significantly. 772 */ 773 dev->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; 774 775 mutex_init(&priv->conf_mutex); 776 mutex_init(&priv->eeprom_mutex); 777 init_completion(&priv->stat_comp); 778 init_completion(&priv->eeprom_comp); 779 init_completion(&priv->beacon_comp); 780 INIT_DELAYED_WORK(&priv->work, p54_work); 781 782 memset(&priv->mc_maclist[0], ~0, ETH_ALEN); 783 priv->curchan = NULL; 784 p54_reset_stats(priv); 785 return dev; 786} 787EXPORT_SYMBOL_GPL(p54_init_common); 788 789int p54_register_common(struct ieee80211_hw *dev, struct device *pdev) 790{ 791 struct p54_common __maybe_unused *priv = dev->priv; 792 int err; 793 794 err = ieee80211_register_hw(dev); 795 if (err) { 796 dev_err(pdev, "Cannot register device (%d).\n", err); 797 return err; 798 } 799 priv->registered = true; 800 801#ifdef CONFIG_P54_LEDS 802 err = p54_init_leds(priv); 803 if (err) { 804 p54_unregister_common(dev); 805 return err; 806 } 807#endif /* CONFIG_P54_LEDS */ 808 809 dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy)); 810 return 0; 811} 812EXPORT_SYMBOL_GPL(p54_register_common); 813 814void p54_free_common(struct ieee80211_hw *dev) 815{ 816 struct p54_common *priv = dev->priv; 817 unsigned int i; 818 819 for (i = 0; i < IEEE80211_NUM_BANDS; i++) 820 kfree(priv->band_table[i]); 821 822 kfree(priv->iq_autocal); 823 kfree(priv->output_limit); 824 kfree(priv->curve_data); 825 kfree(priv->rssi_db); 826 kfree(priv->used_rxkeys); 827 kfree(priv->survey); 828 priv->iq_autocal = NULL; 829 priv->output_limit = NULL; 830 priv->curve_data = NULL; 831 priv->rssi_db = NULL; 832 priv->used_rxkeys = NULL; 833 priv->survey = NULL; 834 ieee80211_free_hw(dev); 835} 836EXPORT_SYMBOL_GPL(p54_free_common); 837 838void p54_unregister_common(struct ieee80211_hw *dev) 839{ 840 struct p54_common *priv = dev->priv; 841 842#ifdef CONFIG_P54_LEDS 843 p54_unregister_leds(priv); 844#endif /* CONFIG_P54_LEDS */ 845 846 if (priv->registered) { 847 priv->registered = false; 848 ieee80211_unregister_hw(dev); 849 } 850 851 mutex_destroy(&priv->conf_mutex); 852 mutex_destroy(&priv->eeprom_mutex); 853} 854EXPORT_SYMBOL_GPL(p54_unregister_common);