at v3.4 960 lines 28 kB view raw
1#ifndef TARGET_CORE_BASE_H 2#define TARGET_CORE_BASE_H 3 4#include <linux/in.h> 5#include <linux/configfs.h> 6#include <linux/dma-mapping.h> 7#include <linux/blkdev.h> 8#include <scsi/scsi_cmnd.h> 9#include <net/sock.h> 10#include <net/tcp.h> 11 12#define TARGET_CORE_MOD_VERSION "v4.1.0-rc2-ml" 13#define TARGET_CORE_VERSION TARGET_CORE_MOD_VERSION 14 15/* Maximum Number of LUNs per Target Portal Group */ 16/* Don't raise above 511 or REPORT_LUNS needs to handle >1 page */ 17#define TRANSPORT_MAX_LUNS_PER_TPG 256 18/* 19 * By default we use 32-byte CDBs in TCM Core and subsystem plugin code. 20 * 21 * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and 22 * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use 23 * 16-byte CDBs by default and require an extra allocation for 24 * 32-byte CDBs to because of legacy issues. 25 * 26 * Within TCM Core there are no such legacy limitiations, so we go ahead 27 * use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size() 28 * within all TCM Core and subsystem plugin code. 29 */ 30#define TCM_MAX_COMMAND_SIZE 32 31/* 32 * From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently 33 * defined 96, but the real limit is 252 (or 260 including the header) 34 */ 35#define TRANSPORT_SENSE_BUFFER SCSI_SENSE_BUFFERSIZE 36/* Used by transport_send_check_condition_and_sense() */ 37#define SPC_SENSE_KEY_OFFSET 2 38#define SPC_ADD_SENSE_LEN_OFFSET 7 39#define SPC_ASC_KEY_OFFSET 12 40#define SPC_ASCQ_KEY_OFFSET 13 41#define TRANSPORT_IQN_LEN 224 42/* Used by target_core_store_alua_lu_gp() and target_core_alua_lu_gp_show_attr_members() */ 43#define LU_GROUP_NAME_BUF 256 44/* Used by core_alua_store_tg_pt_gp_info() and target_core_alua_tg_pt_gp_show_attr_members() */ 45#define TG_PT_GROUP_NAME_BUF 256 46/* Used to parse VPD into struct t10_vpd */ 47#define VPD_TMP_BUF_SIZE 128 48/* Used by transport_generic_cmd_sequencer() */ 49#define READ_BLOCK_LEN 6 50#define READ_CAP_LEN 8 51#define READ_POSITION_LEN 20 52#define INQUIRY_LEN 36 53/* Used by transport_get_inquiry_vpd_serial() */ 54#define INQUIRY_VPD_SERIAL_LEN 254 55/* Used by transport_get_inquiry_vpd_device_ident() */ 56#define INQUIRY_VPD_DEVICE_IDENTIFIER_LEN 254 57 58/* Attempts before moving from SHORT to LONG */ 59#define PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD 3 60#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT 3 /* In milliseconds */ 61#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG 10 /* In milliseconds */ 62 63#define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */ 64 65/* 66 * struct se_subsystem_dev->su_dev_flags 67*/ 68#define SDF_FIRMWARE_VPD_UNIT_SERIAL 0x00000001 69#define SDF_EMULATED_VPD_UNIT_SERIAL 0x00000002 70#define SDF_USING_UDEV_PATH 0x00000004 71#define SDF_USING_ALIAS 0x00000008 72 73/* 74 * struct se_device->dev_flags 75 */ 76#define DF_READ_ONLY 0x00000001 77#define DF_SPC2_RESERVATIONS 0x00000002 78#define DF_SPC2_RESERVATIONS_WITH_ISID 0x00000004 79 80/* struct se_dev_attrib sanity values */ 81/* Default max_unmap_lba_count */ 82#define DA_MAX_UNMAP_LBA_COUNT 0 83/* Default max_unmap_block_desc_count */ 84#define DA_MAX_UNMAP_BLOCK_DESC_COUNT 0 85/* Default unmap_granularity */ 86#define DA_UNMAP_GRANULARITY_DEFAULT 0 87/* Default unmap_granularity_alignment */ 88#define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT 0 89/* Default max transfer length */ 90#define DA_FABRIC_MAX_SECTORS 8192 91/* Emulation for Direct Page Out */ 92#define DA_EMULATE_DPO 0 93/* Emulation for Forced Unit Access WRITEs */ 94#define DA_EMULATE_FUA_WRITE 1 95/* Emulation for Forced Unit Access READs */ 96#define DA_EMULATE_FUA_READ 0 97/* Emulation for WriteCache and SYNCHRONIZE_CACHE */ 98#define DA_EMULATE_WRITE_CACHE 0 99/* Emulation for UNIT ATTENTION Interlock Control */ 100#define DA_EMULATE_UA_INTLLCK_CTRL 0 101/* Emulation for TASK_ABORTED status (TAS) by default */ 102#define DA_EMULATE_TAS 1 103/* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */ 104#define DA_EMULATE_TPU 0 105/* 106 * Emulation for Thin Provisioning WRITE_SAME w/ UNMAP=1 bit using 107 * block/blk-lib.c:blkdev_issue_discard() 108 */ 109#define DA_EMULATE_TPWS 0 110/* No Emulation for PSCSI by default */ 111#define DA_EMULATE_RESERVATIONS 0 112/* No Emulation for PSCSI by default */ 113#define DA_EMULATE_ALUA 0 114/* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */ 115#define DA_ENFORCE_PR_ISIDS 1 116#define DA_STATUS_MAX_SECTORS_MIN 16 117#define DA_STATUS_MAX_SECTORS_MAX 8192 118/* By default don't report non-rotating (solid state) medium */ 119#define DA_IS_NONROT 0 120/* Queue Algorithm Modifier default for restricted reordering in control mode page */ 121#define DA_EMULATE_REST_REORD 0 122 123#define SE_INQUIRY_BUF 512 124#define SE_MODE_PAGE_BUF 512 125 126/* struct se_hba->hba_flags */ 127enum hba_flags_table { 128 HBA_FLAGS_INTERNAL_USE = 0x01, 129 HBA_FLAGS_PSCSI_MODE = 0x02, 130}; 131 132/* struct se_lun->lun_status */ 133enum transport_lun_status_table { 134 TRANSPORT_LUN_STATUS_FREE = 0, 135 TRANSPORT_LUN_STATUS_ACTIVE = 1, 136}; 137 138/* struct se_portal_group->se_tpg_type */ 139enum transport_tpg_type_table { 140 TRANSPORT_TPG_TYPE_NORMAL = 0, 141 TRANSPORT_TPG_TYPE_DISCOVERY = 1, 142}; 143 144/* struct se_task->task_flags */ 145enum se_task_flags { 146 TF_ACTIVE = (1 << 0), 147 TF_SENT = (1 << 1), 148 TF_REQUEST_STOP = (1 << 2), 149 TF_HAS_SENSE = (1 << 3), 150}; 151 152/* Special transport agnostic struct se_cmd->t_states */ 153enum transport_state_table { 154 TRANSPORT_NO_STATE = 0, 155 TRANSPORT_NEW_CMD = 1, 156 TRANSPORT_WRITE_PENDING = 3, 157 TRANSPORT_PROCESS_WRITE = 4, 158 TRANSPORT_PROCESSING = 5, 159 TRANSPORT_COMPLETE = 6, 160 TRANSPORT_PROCESS_TMR = 9, 161 TRANSPORT_ISTATE_PROCESSING = 11, 162 TRANSPORT_NEW_CMD_MAP = 16, 163 TRANSPORT_COMPLETE_QF_WP = 18, 164 TRANSPORT_COMPLETE_QF_OK = 19, 165}; 166 167/* Used for struct se_cmd->se_cmd_flags */ 168enum se_cmd_flags_table { 169 SCF_SUPPORTED_SAM_OPCODE = 0x00000001, 170 SCF_TRANSPORT_TASK_SENSE = 0x00000002, 171 SCF_EMULATED_TASK_SENSE = 0x00000004, 172 SCF_SCSI_DATA_SG_IO_CDB = 0x00000008, 173 SCF_SCSI_CONTROL_SG_IO_CDB = 0x00000010, 174 SCF_SCSI_NON_DATA_CDB = 0x00000020, 175 SCF_SCSI_TMR_CDB = 0x00000040, 176 SCF_SCSI_CDB_EXCEPTION = 0x00000080, 177 SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, 178 SCF_FUA = 0x00000200, 179 SCF_SE_LUN_CMD = 0x00000800, 180 SCF_SE_ALLOW_EOO = 0x00001000, 181 SCF_BIDI = 0x00002000, 182 SCF_SENT_CHECK_CONDITION = 0x00004000, 183 SCF_OVERFLOW_BIT = 0x00008000, 184 SCF_UNDERFLOW_BIT = 0x00010000, 185 SCF_SENT_DELAYED_TAS = 0x00020000, 186 SCF_ALUA_NON_OPTIMIZED = 0x00040000, 187 SCF_DELAYED_CMD_FROM_SAM_ATTR = 0x00080000, 188 SCF_UNUSED = 0x00100000, 189 SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00200000, 190 SCF_ACK_KREF = 0x00400000, 191}; 192 193/* struct se_dev_entry->lun_flags and struct se_lun->lun_access */ 194enum transport_lunflags_table { 195 TRANSPORT_LUNFLAGS_NO_ACCESS = 0x00, 196 TRANSPORT_LUNFLAGS_INITIATOR_ACCESS = 0x01, 197 TRANSPORT_LUNFLAGS_READ_ONLY = 0x02, 198 TRANSPORT_LUNFLAGS_READ_WRITE = 0x04, 199}; 200 201/* struct se_device->dev_status */ 202enum transport_device_status_table { 203 TRANSPORT_DEVICE_ACTIVATED = 0x01, 204 TRANSPORT_DEVICE_DEACTIVATED = 0x02, 205 TRANSPORT_DEVICE_QUEUE_FULL = 0x04, 206 TRANSPORT_DEVICE_SHUTDOWN = 0x08, 207 TRANSPORT_DEVICE_OFFLINE_ACTIVATED = 0x10, 208 TRANSPORT_DEVICE_OFFLINE_DEACTIVATED = 0x20, 209}; 210 211/* 212 * Used by transport_send_check_condition_and_sense() and se_cmd->scsi_sense_reason 213 * to signal which ASC/ASCQ sense payload should be built. 214 */ 215enum tcm_sense_reason_table { 216 TCM_NON_EXISTENT_LUN = 0x01, 217 TCM_UNSUPPORTED_SCSI_OPCODE = 0x02, 218 TCM_INCORRECT_AMOUNT_OF_DATA = 0x03, 219 TCM_UNEXPECTED_UNSOLICITED_DATA = 0x04, 220 TCM_SERVICE_CRC_ERROR = 0x05, 221 TCM_SNACK_REJECTED = 0x06, 222 TCM_SECTOR_COUNT_TOO_MANY = 0x07, 223 TCM_INVALID_CDB_FIELD = 0x08, 224 TCM_INVALID_PARAMETER_LIST = 0x09, 225 TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE = 0x0a, 226 TCM_UNKNOWN_MODE_PAGE = 0x0b, 227 TCM_WRITE_PROTECTED = 0x0c, 228 TCM_CHECK_CONDITION_ABORT_CMD = 0x0d, 229 TCM_CHECK_CONDITION_UNIT_ATTENTION = 0x0e, 230 TCM_CHECK_CONDITION_NOT_READY = 0x0f, 231 TCM_RESERVATION_CONFLICT = 0x10, 232}; 233 234enum target_sc_flags_table { 235 TARGET_SCF_BIDI_OP = 0x01, 236 TARGET_SCF_ACK_KREF = 0x02, 237}; 238 239/* fabric independent task management function values */ 240enum tcm_tmreq_table { 241 TMR_ABORT_TASK = 1, 242 TMR_ABORT_TASK_SET = 2, 243 TMR_CLEAR_ACA = 3, 244 TMR_CLEAR_TASK_SET = 4, 245 TMR_LUN_RESET = 5, 246 TMR_TARGET_WARM_RESET = 6, 247 TMR_TARGET_COLD_RESET = 7, 248 TMR_FABRIC_TMR = 255, 249}; 250 251/* fabric independent task management response values */ 252enum tcm_tmrsp_table { 253 TMR_FUNCTION_COMPLETE = 0, 254 TMR_TASK_DOES_NOT_EXIST = 1, 255 TMR_LUN_DOES_NOT_EXIST = 2, 256 TMR_TASK_STILL_ALLEGIANT = 3, 257 TMR_TASK_FAILOVER_NOT_SUPPORTED = 4, 258 TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED = 5, 259 TMR_FUNCTION_AUTHORIZATION_FAILED = 6, 260 TMR_FUNCTION_REJECTED = 255, 261}; 262 263struct se_obj { 264 atomic_t obj_access_count; 265}; 266 267/* 268 * Used by TCM Core internally to signal if ALUA emulation is enabled or 269 * disabled, or running in with TCM/pSCSI passthrough mode 270 */ 271typedef enum { 272 SPC_ALUA_PASSTHROUGH, 273 SPC2_ALUA_DISABLED, 274 SPC3_ALUA_EMULATED 275} t10_alua_index_t; 276 277/* 278 * Used by TCM Core internally to signal if SAM Task Attribute emulation 279 * is enabled or disabled, or running in with TCM/pSCSI passthrough mode 280 */ 281typedef enum { 282 SAM_TASK_ATTR_PASSTHROUGH, 283 SAM_TASK_ATTR_UNTAGGED, 284 SAM_TASK_ATTR_EMULATED 285} t10_task_attr_index_t; 286 287/* 288 * Used for target SCSI statistics 289 */ 290typedef enum { 291 SCSI_INST_INDEX, 292 SCSI_DEVICE_INDEX, 293 SCSI_AUTH_INTR_INDEX, 294 SCSI_INDEX_TYPE_MAX 295} scsi_index_t; 296 297struct se_cmd; 298 299struct t10_alua { 300 t10_alua_index_t alua_type; 301 /* ALUA Target Port Group ID */ 302 u16 alua_tg_pt_gps_counter; 303 u32 alua_tg_pt_gps_count; 304 spinlock_t tg_pt_gps_lock; 305 struct se_subsystem_dev *t10_sub_dev; 306 /* Used for default ALUA Target Port Group */ 307 struct t10_alua_tg_pt_gp *default_tg_pt_gp; 308 /* Used for default ALUA Target Port Group ConfigFS group */ 309 struct config_group alua_tg_pt_gps_group; 310 int (*alua_state_check)(struct se_cmd *, unsigned char *, u8 *); 311 struct list_head tg_pt_gps_list; 312}; 313 314struct t10_alua_lu_gp { 315 u16 lu_gp_id; 316 int lu_gp_valid_id; 317 u32 lu_gp_members; 318 atomic_t lu_gp_ref_cnt; 319 spinlock_t lu_gp_lock; 320 struct config_group lu_gp_group; 321 struct list_head lu_gp_node; 322 struct list_head lu_gp_mem_list; 323}; 324 325struct t10_alua_lu_gp_member { 326 bool lu_gp_assoc; 327 atomic_t lu_gp_mem_ref_cnt; 328 spinlock_t lu_gp_mem_lock; 329 struct t10_alua_lu_gp *lu_gp; 330 struct se_device *lu_gp_mem_dev; 331 struct list_head lu_gp_mem_list; 332}; 333 334struct t10_alua_tg_pt_gp { 335 u16 tg_pt_gp_id; 336 int tg_pt_gp_valid_id; 337 int tg_pt_gp_alua_access_status; 338 int tg_pt_gp_alua_access_type; 339 int tg_pt_gp_nonop_delay_msecs; 340 int tg_pt_gp_trans_delay_msecs; 341 int tg_pt_gp_pref; 342 int tg_pt_gp_write_metadata; 343 /* Used by struct t10_alua_tg_pt_gp->tg_pt_gp_md_buf_len */ 344#define ALUA_MD_BUF_LEN 1024 345 u32 tg_pt_gp_md_buf_len; 346 u32 tg_pt_gp_members; 347 atomic_t tg_pt_gp_alua_access_state; 348 atomic_t tg_pt_gp_ref_cnt; 349 spinlock_t tg_pt_gp_lock; 350 struct mutex tg_pt_gp_md_mutex; 351 struct se_subsystem_dev *tg_pt_gp_su_dev; 352 struct config_group tg_pt_gp_group; 353 struct list_head tg_pt_gp_list; 354 struct list_head tg_pt_gp_mem_list; 355}; 356 357struct t10_alua_tg_pt_gp_member { 358 bool tg_pt_gp_assoc; 359 atomic_t tg_pt_gp_mem_ref_cnt; 360 spinlock_t tg_pt_gp_mem_lock; 361 struct t10_alua_tg_pt_gp *tg_pt_gp; 362 struct se_port *tg_pt; 363 struct list_head tg_pt_gp_mem_list; 364}; 365 366struct t10_vpd { 367 unsigned char device_identifier[INQUIRY_VPD_DEVICE_IDENTIFIER_LEN]; 368 int protocol_identifier_set; 369 u32 protocol_identifier; 370 u32 device_identifier_code_set; 371 u32 association; 372 u32 device_identifier_type; 373 struct list_head vpd_list; 374}; 375 376struct t10_wwn { 377 char vendor[8]; 378 char model[16]; 379 char revision[4]; 380 char unit_serial[INQUIRY_VPD_SERIAL_LEN]; 381 spinlock_t t10_vpd_lock; 382 struct se_subsystem_dev *t10_sub_dev; 383 struct config_group t10_wwn_group; 384 struct list_head t10_vpd_list; 385}; 386 387 388/* 389 * Used by TCM Core internally to signal if >= SPC-3 persistent reservations 390 * emulation is enabled or disabled, or running in with TCM/pSCSI passthrough 391 * mode 392 */ 393typedef enum { 394 SPC_PASSTHROUGH, 395 SPC2_RESERVATIONS, 396 SPC3_PERSISTENT_RESERVATIONS 397} t10_reservations_index_t; 398 399struct t10_pr_registration { 400 /* Used for fabrics that contain WWN+ISID */ 401#define PR_REG_ISID_LEN 16 402 /* PR_REG_ISID_LEN + ',i,0x' */ 403#define PR_REG_ISID_ID_LEN (PR_REG_ISID_LEN + 5) 404 char pr_reg_isid[PR_REG_ISID_LEN]; 405 /* Used during APTPL metadata reading */ 406#define PR_APTPL_MAX_IPORT_LEN 256 407 unsigned char pr_iport[PR_APTPL_MAX_IPORT_LEN]; 408 /* Used during APTPL metadata reading */ 409#define PR_APTPL_MAX_TPORT_LEN 256 410 unsigned char pr_tport[PR_APTPL_MAX_TPORT_LEN]; 411 /* For writing out live meta data */ 412 unsigned char *pr_aptpl_buf; 413 u16 pr_aptpl_rpti; 414 u16 pr_reg_tpgt; 415 /* Reservation effects all target ports */ 416 int pr_reg_all_tg_pt; 417 /* Activate Persistence across Target Power Loss */ 418 int pr_reg_aptpl; 419 int pr_res_holder; 420 int pr_res_type; 421 int pr_res_scope; 422 /* Used for fabric initiator WWPNs using a ISID */ 423 bool isid_present_at_reg; 424 u32 pr_res_mapped_lun; 425 u32 pr_aptpl_target_lun; 426 u32 pr_res_generation; 427 u64 pr_reg_bin_isid; 428 u64 pr_res_key; 429 atomic_t pr_res_holders; 430 struct se_node_acl *pr_reg_nacl; 431 struct se_dev_entry *pr_reg_deve; 432 struct se_lun *pr_reg_tg_pt_lun; 433 struct list_head pr_reg_list; 434 struct list_head pr_reg_abort_list; 435 struct list_head pr_reg_aptpl_list; 436 struct list_head pr_reg_atp_list; 437 struct list_head pr_reg_atp_mem_list; 438}; 439 440/* 441 * This set of function pointer ops is set based upon SPC3_PERSISTENT_RESERVATIONS, 442 * SPC2_RESERVATIONS or SPC_PASSTHROUGH in drivers/target/target_core_pr.c: 443 * core_setup_reservations() 444 */ 445struct t10_reservation_ops { 446 int (*t10_reservation_check)(struct se_cmd *, u32 *); 447 int (*t10_seq_non_holder)(struct se_cmd *, unsigned char *, u32); 448 int (*t10_pr_register)(struct se_cmd *); 449 int (*t10_pr_clear)(struct se_cmd *); 450}; 451 452struct t10_reservation { 453 /* Reservation effects all target ports */ 454 int pr_all_tg_pt; 455 /* Activate Persistence across Target Power Loss enabled 456 * for SCSI device */ 457 int pr_aptpl_active; 458 /* Used by struct t10_reservation->pr_aptpl_buf_len */ 459#define PR_APTPL_BUF_LEN 8192 460 u32 pr_aptpl_buf_len; 461 u32 pr_generation; 462 t10_reservations_index_t res_type; 463 spinlock_t registration_lock; 464 spinlock_t aptpl_reg_lock; 465 /* 466 * This will always be set by one individual I_T Nexus. 467 * However with all_tg_pt=1, other I_T Nexus from the 468 * same initiator can access PR reg/res info on a different 469 * target port. 470 * 471 * There is also the 'All Registrants' case, where there is 472 * a single *pr_res_holder of the reservation, but all 473 * registrations are considered reservation holders. 474 */ 475 struct se_node_acl *pr_res_holder; 476 struct list_head registration_list; 477 struct list_head aptpl_reg_list; 478 struct t10_reservation_ops pr_ops; 479}; 480 481struct se_queue_obj { 482 atomic_t queue_cnt; 483 spinlock_t cmd_queue_lock; 484 struct list_head qobj_list; 485 wait_queue_head_t thread_wq; 486}; 487 488struct se_task { 489 unsigned long long task_lba; 490 u32 task_sectors; 491 u32 task_size; 492 struct se_cmd *task_se_cmd; 493 struct scatterlist *task_sg; 494 u32 task_sg_nents; 495 u16 task_flags; 496 u8 task_scsi_status; 497 enum dma_data_direction task_data_direction; 498 struct list_head t_list; 499 struct list_head t_execute_list; 500 struct list_head t_state_list; 501 bool t_state_active; 502 struct completion task_stop_comp; 503}; 504 505struct se_tmr_req { 506 /* Task Management function to be performed */ 507 u8 function; 508 /* Task Management response to send */ 509 u8 response; 510 int call_transport; 511 /* Reference to ITT that Task Mgmt should be performed */ 512 u32 ref_task_tag; 513 /* 64-bit encoded SAM LUN from $FABRIC_MOD TMR header */ 514 u64 ref_task_lun; 515 void *fabric_tmr_ptr; 516 struct se_cmd *task_cmd; 517 struct se_cmd *ref_cmd; 518 struct se_device *tmr_dev; 519 struct se_lun *tmr_lun; 520 struct list_head tmr_list; 521}; 522 523struct se_cmd { 524 /* SAM response code being sent to initiator */ 525 u8 scsi_status; 526 u8 scsi_asc; 527 u8 scsi_ascq; 528 u8 scsi_sense_reason; 529 u16 scsi_sense_length; 530 /* Delay for ALUA Active/NonOptimized state access in milliseconds */ 531 int alua_nonop_delay; 532 /* See include/linux/dma-mapping.h */ 533 enum dma_data_direction data_direction; 534 /* For SAM Task Attribute */ 535 int sam_task_attr; 536 /* Transport protocol dependent state, see transport_state_table */ 537 enum transport_state_table t_state; 538 /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */ 539 unsigned check_release:1; 540 unsigned cmd_wait_set:1; 541 /* See se_cmd_flags_table */ 542 u32 se_cmd_flags; 543 u32 se_ordered_id; 544 /* Total size in bytes associated with command */ 545 u32 data_length; 546 /* SCSI Presented Data Transfer Length */ 547 u32 cmd_spdtl; 548 u32 residual_count; 549 u32 orig_fe_lun; 550 /* Persistent Reservation key */ 551 u64 pr_res_key; 552 /* Used for sense data */ 553 void *sense_buffer; 554 struct list_head se_delayed_node; 555 struct list_head se_lun_node; 556 struct list_head se_qf_node; 557 struct se_device *se_dev; 558 struct se_dev_entry *se_deve; 559 struct se_lun *se_lun; 560 /* Only used for internal passthrough and legacy TCM fabric modules */ 561 struct se_session *se_sess; 562 struct se_tmr_req *se_tmr_req; 563 struct list_head se_queue_node; 564 struct list_head se_cmd_list; 565 struct completion cmd_wait_comp; 566 struct kref cmd_kref; 567 struct target_core_fabric_ops *se_tfo; 568 int (*execute_task)(struct se_task *); 569 void (*transport_complete_callback)(struct se_cmd *); 570 571 unsigned char *t_task_cdb; 572 unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; 573 unsigned long long t_task_lba; 574 u32 t_tasks_sg_chained_no; 575 atomic_t t_fe_count; 576 atomic_t t_se_count; 577 atomic_t t_task_cdbs_left; 578 atomic_t t_task_cdbs_ex_left; 579 atomic_t t_task_cdbs_sent; 580 unsigned int transport_state; 581#define CMD_T_ABORTED (1 << 0) 582#define CMD_T_ACTIVE (1 << 1) 583#define CMD_T_COMPLETE (1 << 2) 584#define CMD_T_QUEUED (1 << 3) 585#define CMD_T_SENT (1 << 4) 586#define CMD_T_STOP (1 << 5) 587#define CMD_T_FAILED (1 << 6) 588#define CMD_T_LUN_STOP (1 << 7) 589#define CMD_T_LUN_FE_STOP (1 << 8) 590#define CMD_T_DEV_ACTIVE (1 << 9) 591 spinlock_t t_state_lock; 592 struct completion t_transport_stop_comp; 593 struct completion transport_lun_fe_stop_comp; 594 struct completion transport_lun_stop_comp; 595 struct scatterlist *t_tasks_sg_chained; 596 597 struct work_struct work; 598 599 struct scatterlist *t_data_sg; 600 unsigned int t_data_nents; 601 void *t_data_vmap; 602 struct scatterlist *t_bidi_data_sg; 603 unsigned int t_bidi_data_nents; 604 605 /* Used for BIDI READ */ 606 struct list_head t_task_list; 607 u32 t_task_list_num; 608 609}; 610 611struct se_ua { 612 u8 ua_asc; 613 u8 ua_ascq; 614 struct se_node_acl *ua_nacl; 615 struct list_head ua_dev_list; 616 struct list_head ua_nacl_list; 617}; 618 619struct se_node_acl { 620 char initiatorname[TRANSPORT_IQN_LEN]; 621 /* Used to signal demo mode created ACL, disabled by default */ 622 bool dynamic_node_acl; 623 bool acl_stop:1; 624 u32 queue_depth; 625 u32 acl_index; 626 u64 num_cmds; 627 u64 read_bytes; 628 u64 write_bytes; 629 spinlock_t stats_lock; 630 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */ 631 atomic_t acl_pr_ref_count; 632 struct se_dev_entry **device_list; 633 struct se_session *nacl_sess; 634 struct se_portal_group *se_tpg; 635 spinlock_t device_list_lock; 636 spinlock_t nacl_sess_lock; 637 struct config_group acl_group; 638 struct config_group acl_attrib_group; 639 struct config_group acl_auth_group; 640 struct config_group acl_param_group; 641 struct config_group acl_fabric_stat_group; 642 struct config_group *acl_default_groups[5]; 643 struct list_head acl_list; 644 struct list_head acl_sess_list; 645 struct completion acl_free_comp; 646 struct kref acl_kref; 647}; 648 649struct se_session { 650 unsigned sess_tearing_down:1; 651 u64 sess_bin_isid; 652 struct se_node_acl *se_node_acl; 653 struct se_portal_group *se_tpg; 654 void *fabric_sess_ptr; 655 struct list_head sess_list; 656 struct list_head sess_acl_list; 657 struct list_head sess_cmd_list; 658 struct list_head sess_wait_list; 659 spinlock_t sess_cmd_lock; 660 struct kref sess_kref; 661}; 662 663struct se_device; 664struct se_transform_info; 665struct scatterlist; 666 667struct se_ml_stat_grps { 668 struct config_group stat_group; 669 struct config_group scsi_auth_intr_group; 670 struct config_group scsi_att_intr_port_group; 671}; 672 673struct se_lun_acl { 674 char initiatorname[TRANSPORT_IQN_LEN]; 675 u32 mapped_lun; 676 struct se_node_acl *se_lun_nacl; 677 struct se_lun *se_lun; 678 struct list_head lacl_list; 679 struct config_group se_lun_group; 680 struct se_ml_stat_grps ml_stat_grps; 681}; 682 683struct se_dev_entry { 684 bool def_pr_registered; 685 /* See transport_lunflags_table */ 686 u32 lun_flags; 687 u32 deve_cmds; 688 u32 mapped_lun; 689 u32 average_bytes; 690 u32 last_byte_count; 691 u32 total_cmds; 692 u32 total_bytes; 693 u64 pr_res_key; 694 u64 creation_time; 695 u32 attach_count; 696 u64 read_bytes; 697 u64 write_bytes; 698 atomic_t ua_count; 699 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */ 700 atomic_t pr_ref_count; 701 struct se_lun_acl *se_lun_acl; 702 spinlock_t ua_lock; 703 struct se_lun *se_lun; 704 struct list_head alua_port_list; 705 struct list_head ua_list; 706}; 707 708struct se_dev_limits { 709 /* Max supported HW queue depth */ 710 u32 hw_queue_depth; 711 /* Max supported virtual queue depth */ 712 u32 queue_depth; 713 /* From include/linux/blkdev.h for the other HW/SW limits. */ 714 struct queue_limits limits; 715}; 716 717struct se_dev_attrib { 718 int emulate_dpo; 719 int emulate_fua_write; 720 int emulate_fua_read; 721 int emulate_write_cache; 722 int emulate_ua_intlck_ctrl; 723 int emulate_tas; 724 int emulate_tpu; 725 int emulate_tpws; 726 int emulate_reservations; 727 int emulate_alua; 728 int enforce_pr_isids; 729 int is_nonrot; 730 int emulate_rest_reord; 731 u32 hw_block_size; 732 u32 block_size; 733 u32 hw_max_sectors; 734 u32 max_sectors; 735 u32 fabric_max_sectors; 736 u32 optimal_sectors; 737 u32 hw_queue_depth; 738 u32 queue_depth; 739 u32 max_unmap_lba_count; 740 u32 max_unmap_block_desc_count; 741 u32 unmap_granularity; 742 u32 unmap_granularity_alignment; 743 struct se_subsystem_dev *da_sub_dev; 744 struct config_group da_group; 745}; 746 747struct se_dev_stat_grps { 748 struct config_group stat_group; 749 struct config_group scsi_dev_group; 750 struct config_group scsi_tgt_dev_group; 751 struct config_group scsi_lu_group; 752}; 753 754struct se_subsystem_dev { 755/* Used for struct se_subsystem_dev-->se_dev_alias, must be less than PAGE_SIZE */ 756#define SE_DEV_ALIAS_LEN 512 757 unsigned char se_dev_alias[SE_DEV_ALIAS_LEN]; 758/* Used for struct se_subsystem_dev->se_dev_udev_path[], must be less than PAGE_SIZE */ 759#define SE_UDEV_PATH_LEN 512 760 unsigned char se_dev_udev_path[SE_UDEV_PATH_LEN]; 761 u32 su_dev_flags; 762 struct se_hba *se_dev_hba; 763 struct se_device *se_dev_ptr; 764 struct se_dev_attrib se_dev_attrib; 765 /* T10 Asymmetric Logical Unit Assignment for Target Ports */ 766 struct t10_alua t10_alua; 767 /* T10 Inquiry and VPD WWN Information */ 768 struct t10_wwn t10_wwn; 769 /* T10 SPC-2 + SPC-3 Reservations */ 770 struct t10_reservation t10_pr; 771 spinlock_t se_dev_lock; 772 void *se_dev_su_ptr; 773 struct config_group se_dev_group; 774 /* For T10 Reservations */ 775 struct config_group se_dev_pr_group; 776 /* For target_core_stat.c groups */ 777 struct se_dev_stat_grps dev_stat_grps; 778}; 779 780struct se_device { 781 /* RELATIVE TARGET PORT IDENTIFER Counter */ 782 u16 dev_rpti_counter; 783 /* Used for SAM Task Attribute ordering */ 784 u32 dev_cur_ordered_id; 785 u32 dev_flags; 786 u32 dev_port_count; 787 /* See transport_device_status_table */ 788 u32 dev_status; 789 /* Physical device queue depth */ 790 u32 queue_depth; 791 /* Used for SPC-2 reservations enforce of ISIDs */ 792 u64 dev_res_bin_isid; 793 t10_task_attr_index_t dev_task_attr_type; 794 /* Pointer to transport specific device structure */ 795 void *dev_ptr; 796 u32 dev_index; 797 u64 creation_time; 798 u32 num_resets; 799 u64 num_cmds; 800 u64 read_bytes; 801 u64 write_bytes; 802 spinlock_t stats_lock; 803 /* Active commands on this virtual SE device */ 804 atomic_t simple_cmds; 805 atomic_t dev_ordered_id; 806 atomic_t execute_tasks; 807 atomic_t dev_ordered_sync; 808 atomic_t dev_qf_count; 809 struct se_obj dev_obj; 810 struct se_obj dev_access_obj; 811 struct se_obj dev_export_obj; 812 struct se_queue_obj dev_queue_obj; 813 spinlock_t delayed_cmd_lock; 814 spinlock_t execute_task_lock; 815 spinlock_t dev_reservation_lock; 816 spinlock_t dev_status_lock; 817 spinlock_t se_port_lock; 818 spinlock_t se_tmr_lock; 819 spinlock_t qf_cmd_lock; 820 /* Used for legacy SPC-2 reservationsa */ 821 struct se_node_acl *dev_reserved_node_acl; 822 /* Used for ALUA Logical Unit Group membership */ 823 struct t10_alua_lu_gp_member *dev_alua_lu_gp_mem; 824 /* Used for SPC-3 Persistent Reservations */ 825 struct t10_pr_registration *dev_pr_res_holder; 826 struct list_head dev_sep_list; 827 struct list_head dev_tmr_list; 828 /* Pointer to descriptor for processing thread */ 829 struct task_struct *process_thread; 830 struct work_struct qf_work_queue; 831 struct list_head delayed_cmd_list; 832 struct list_head execute_task_list; 833 struct list_head state_task_list; 834 struct list_head qf_cmd_list; 835 /* Pointer to associated SE HBA */ 836 struct se_hba *se_hba; 837 struct se_subsystem_dev *se_sub_dev; 838 /* Pointer to template of function pointers for transport */ 839 struct se_subsystem_api *transport; 840 /* Linked list for struct se_hba struct se_device list */ 841 struct list_head dev_list; 842}; 843 844struct se_hba { 845 u16 hba_tpgt; 846 u32 hba_id; 847 /* See hba_flags_table */ 848 u32 hba_flags; 849 /* Virtual iSCSI devices attached. */ 850 u32 dev_count; 851 u32 hba_index; 852 /* Pointer to transport specific host structure. */ 853 void *hba_ptr; 854 /* Linked list for struct se_device */ 855 struct list_head hba_dev_list; 856 struct list_head hba_node; 857 spinlock_t device_lock; 858 struct config_group hba_group; 859 struct mutex hba_access_mutex; 860 struct se_subsystem_api *transport; 861}; 862 863struct se_port_stat_grps { 864 struct config_group stat_group; 865 struct config_group scsi_port_group; 866 struct config_group scsi_tgt_port_group; 867 struct config_group scsi_transport_group; 868}; 869 870struct se_lun { 871 /* See transport_lun_status_table */ 872 enum transport_lun_status_table lun_status; 873 u32 lun_access; 874 u32 lun_flags; 875 u32 unpacked_lun; 876 atomic_t lun_acl_count; 877 spinlock_t lun_acl_lock; 878 spinlock_t lun_cmd_lock; 879 spinlock_t lun_sep_lock; 880 struct completion lun_shutdown_comp; 881 struct list_head lun_cmd_list; 882 struct list_head lun_acl_list; 883 struct se_device *lun_se_dev; 884 struct se_port *lun_sep; 885 struct config_group lun_group; 886 struct se_port_stat_grps port_stat_grps; 887}; 888 889struct scsi_port_stats { 890 u64 cmd_pdus; 891 u64 tx_data_octets; 892 u64 rx_data_octets; 893}; 894 895struct se_port { 896 /* RELATIVE TARGET PORT IDENTIFER */ 897 u16 sep_rtpi; 898 int sep_tg_pt_secondary_stat; 899 int sep_tg_pt_secondary_write_md; 900 u32 sep_index; 901 struct scsi_port_stats sep_stats; 902 /* Used for ALUA Target Port Groups membership */ 903 atomic_t sep_tg_pt_secondary_offline; 904 /* Used for PR ALL_TG_PT=1 */ 905 atomic_t sep_tg_pt_ref_cnt; 906 spinlock_t sep_alua_lock; 907 struct mutex sep_tg_pt_md_mutex; 908 struct t10_alua_tg_pt_gp_member *sep_alua_tg_pt_gp_mem; 909 struct se_lun *sep_lun; 910 struct se_portal_group *sep_tpg; 911 struct list_head sep_alua_list; 912 struct list_head sep_list; 913}; 914 915struct se_tpg_np { 916 struct se_portal_group *tpg_np_parent; 917 struct config_group tpg_np_group; 918}; 919 920struct se_portal_group { 921 /* Type of target portal group, see transport_tpg_type_table */ 922 enum transport_tpg_type_table se_tpg_type; 923 /* Number of ACLed Initiator Nodes for this TPG */ 924 u32 num_node_acls; 925 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */ 926 atomic_t tpg_pr_ref_count; 927 /* Spinlock for adding/removing ACLed Nodes */ 928 spinlock_t acl_node_lock; 929 /* Spinlock for adding/removing sessions */ 930 spinlock_t session_lock; 931 spinlock_t tpg_lun_lock; 932 /* Pointer to $FABRIC_MOD portal group */ 933 void *se_tpg_fabric_ptr; 934 struct list_head se_tpg_node; 935 /* linked list for initiator ACL list */ 936 struct list_head acl_node_list; 937 struct se_lun **tpg_lun_list; 938 struct se_lun tpg_virt_lun0; 939 /* List of TCM sessions associated wth this TPG */ 940 struct list_head tpg_sess_list; 941 /* Pointer to $FABRIC_MOD dependent code */ 942 struct target_core_fabric_ops *se_tpg_tfo; 943 struct se_wwn *se_tpg_wwn; 944 struct config_group tpg_group; 945 struct config_group *tpg_default_groups[6]; 946 struct config_group tpg_lun_group; 947 struct config_group tpg_np_group; 948 struct config_group tpg_acl_group; 949 struct config_group tpg_attrib_group; 950 struct config_group tpg_param_group; 951}; 952 953struct se_wwn { 954 struct target_fabric_configfs *wwn_tf; 955 struct config_group wwn_group; 956 struct config_group *wwn_default_groups[2]; 957 struct config_group fabric_stat_group; 958}; 959 960#endif /* TARGET_CORE_BASE_H */