Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v3.2-rc1 923 lines 23 kB view raw
1/* 2 * Analog Devices Blackfin(BF537 STAMP) + SHARP TFT LCD. 3 * http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:tft-lcd 4 * 5 * Copyright 2006-2010 Analog Devices Inc. 6 * Licensed under the GPL-2. 7 */ 8 9#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 10 11#include <linux/module.h> 12#include <linux/kernel.h> 13#include <linux/errno.h> 14#include <linux/string.h> 15#include <linux/mm.h> 16#include <linux/delay.h> 17#include <linux/fb.h> 18#include <linux/ioport.h> 19#include <linux/init.h> 20#include <linux/types.h> 21#include <linux/gpio.h> 22#include <linux/interrupt.h> 23#include <linux/sched.h> 24#include <linux/timer.h> 25#include <linux/device.h> 26#include <linux/backlight.h> 27#include <linux/lcd.h> 28#include <linux/i2c.h> 29#include <linux/spinlock.h> 30#include <linux/dma-mapping.h> 31#include <linux/slab.h> 32#include <linux/platform_device.h> 33 34#include <asm/blackfin.h> 35#include <asm/irq.h> 36#include <asm/dpmc.h> 37#include <asm/dma.h> 38#include <asm/portmux.h> 39 40#define NO_BL 1 41 42#define MAX_BRIGHENESS 95 43#define MIN_BRIGHENESS 5 44#define NBR_PALETTE 256 45 46static const unsigned short ppi_pins[] = { 47 P_PPI0_CLK, P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, 48 P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, 49 P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, 50 P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, 0 51}; 52 53static unsigned char *fb_buffer; /* RGB Buffer */ 54static unsigned long *dma_desc_table; 55static int t_conf_done, lq035_open_cnt; 56static DEFINE_SPINLOCK(bfin_lq035_lock); 57 58static int landscape; 59module_param(landscape, int, 0); 60MODULE_PARM_DESC(landscape, 61 "LANDSCAPE use 320x240 instead of Native 240x320 Resolution"); 62 63static int bgr; 64module_param(bgr, int, 0); 65MODULE_PARM_DESC(bgr, 66 "BGR use 16-bit BGR-565 instead of RGB-565"); 67 68static int nocursor = 1; 69module_param(nocursor, int, 0644); 70MODULE_PARM_DESC(nocursor, "cursor enable/disable"); 71 72static unsigned long current_brightness; /* backlight */ 73 74/* AD5280 vcomm */ 75static unsigned char vcomm_value = 150; 76static struct i2c_client *ad5280_client; 77 78static void set_vcomm(void) 79{ 80 int nr; 81 82 if (!ad5280_client) 83 return; 84 85 nr = i2c_smbus_write_byte_data(ad5280_client, 0x00, vcomm_value); 86 if (nr) 87 pr_err("i2c_smbus_write_byte_data fail: %d\n", nr); 88} 89 90static int __devinit ad5280_probe(struct i2c_client *client, 91 const struct i2c_device_id *id) 92{ 93 int ret; 94 if (!i2c_check_functionality(client->adapter, 95 I2C_FUNC_SMBUS_BYTE_DATA)) { 96 dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); 97 return -EIO; 98 } 99 100 ret = i2c_smbus_write_byte_data(client, 0x00, vcomm_value); 101 if (ret) { 102 dev_err(&client->dev, "write fail: %d\n", ret); 103 return ret; 104 } 105 106 ad5280_client = client; 107 108 return 0; 109} 110 111static int __devexit ad5280_remove(struct i2c_client *client) 112{ 113 ad5280_client = NULL; 114 return 0; 115} 116 117static const struct i2c_device_id ad5280_id[] = { 118 {"bf537-lq035-ad5280", 0}, 119 {} 120}; 121 122MODULE_DEVICE_TABLE(i2c, ad5280_id); 123 124static struct i2c_driver ad5280_driver = { 125 .driver = { 126 .name = "bf537-lq035-ad5280", 127 }, 128 .probe = ad5280_probe, 129 .remove = __devexit_p(ad5280_remove), 130 .id_table = ad5280_id, 131}; 132 133#ifdef CONFIG_PNAV10 134#define MOD GPIO_PH13 135 136#define bfin_write_TIMER_LP_CONFIG bfin_write_TIMER0_CONFIG 137#define bfin_write_TIMER_LP_WIDTH bfin_write_TIMER0_WIDTH 138#define bfin_write_TIMER_LP_PERIOD bfin_write_TIMER0_PERIOD 139#define bfin_read_TIMER_LP_COUNTER bfin_read_TIMER0_COUNTER 140#define TIMDIS_LP TIMDIS0 141#define TIMEN_LP TIMEN0 142 143#define bfin_write_TIMER_SPS_CONFIG bfin_write_TIMER1_CONFIG 144#define bfin_write_TIMER_SPS_WIDTH bfin_write_TIMER1_WIDTH 145#define bfin_write_TIMER_SPS_PERIOD bfin_write_TIMER1_PERIOD 146#define TIMDIS_SPS TIMDIS1 147#define TIMEN_SPS TIMEN1 148 149#define bfin_write_TIMER_SP_CONFIG bfin_write_TIMER5_CONFIG 150#define bfin_write_TIMER_SP_WIDTH bfin_write_TIMER5_WIDTH 151#define bfin_write_TIMER_SP_PERIOD bfin_write_TIMER5_PERIOD 152#define TIMDIS_SP TIMDIS5 153#define TIMEN_SP TIMEN5 154 155#define bfin_write_TIMER_PS_CLS_CONFIG bfin_write_TIMER2_CONFIG 156#define bfin_write_TIMER_PS_CLS_WIDTH bfin_write_TIMER2_WIDTH 157#define bfin_write_TIMER_PS_CLS_PERIOD bfin_write_TIMER2_PERIOD 158#define TIMDIS_PS_CLS TIMDIS2 159#define TIMEN_PS_CLS TIMEN2 160 161#define bfin_write_TIMER_REV_CONFIG bfin_write_TIMER3_CONFIG 162#define bfin_write_TIMER_REV_WIDTH bfin_write_TIMER3_WIDTH 163#define bfin_write_TIMER_REV_PERIOD bfin_write_TIMER3_PERIOD 164#define TIMDIS_REV TIMDIS3 165#define TIMEN_REV TIMEN3 166#define bfin_read_TIMER_REV_COUNTER bfin_read_TIMER3_COUNTER 167 168#define FREQ_PPI_CLK (5*1024*1024) /* PPI_CLK 5MHz */ 169 170#define TIMERS {P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR5, 0} 171 172#else 173 174#define UD GPIO_PF13 /* Up / Down */ 175#define MOD GPIO_PF10 176#define LBR GPIO_PF14 /* Left Right */ 177 178#define bfin_write_TIMER_LP_CONFIG bfin_write_TIMER6_CONFIG 179#define bfin_write_TIMER_LP_WIDTH bfin_write_TIMER6_WIDTH 180#define bfin_write_TIMER_LP_PERIOD bfin_write_TIMER6_PERIOD 181#define bfin_read_TIMER_LP_COUNTER bfin_read_TIMER6_COUNTER 182#define TIMDIS_LP TIMDIS6 183#define TIMEN_LP TIMEN6 184 185#define bfin_write_TIMER_SPS_CONFIG bfin_write_TIMER1_CONFIG 186#define bfin_write_TIMER_SPS_WIDTH bfin_write_TIMER1_WIDTH 187#define bfin_write_TIMER_SPS_PERIOD bfin_write_TIMER1_PERIOD 188#define TIMDIS_SPS TIMDIS1 189#define TIMEN_SPS TIMEN1 190 191#define bfin_write_TIMER_SP_CONFIG bfin_write_TIMER0_CONFIG 192#define bfin_write_TIMER_SP_WIDTH bfin_write_TIMER0_WIDTH 193#define bfin_write_TIMER_SP_PERIOD bfin_write_TIMER0_PERIOD 194#define TIMDIS_SP TIMDIS0 195#define TIMEN_SP TIMEN0 196 197#define bfin_write_TIMER_PS_CLS_CONFIG bfin_write_TIMER7_CONFIG 198#define bfin_write_TIMER_PS_CLS_WIDTH bfin_write_TIMER7_WIDTH 199#define bfin_write_TIMER_PS_CLS_PERIOD bfin_write_TIMER7_PERIOD 200#define TIMDIS_PS_CLS TIMDIS7 201#define TIMEN_PS_CLS TIMEN7 202 203#define bfin_write_TIMER_REV_CONFIG bfin_write_TIMER5_CONFIG 204#define bfin_write_TIMER_REV_WIDTH bfin_write_TIMER5_WIDTH 205#define bfin_write_TIMER_REV_PERIOD bfin_write_TIMER5_PERIOD 206#define TIMDIS_REV TIMDIS5 207#define TIMEN_REV TIMEN5 208#define bfin_read_TIMER_REV_COUNTER bfin_read_TIMER5_COUNTER 209 210#define FREQ_PPI_CLK (6*1000*1000) /* PPI_CLK 6MHz */ 211#define TIMERS {P_TMR0, P_TMR1, P_TMR5, P_TMR6, P_TMR7, 0} 212 213#endif 214 215#define LCD_X_RES 240 /* Horizontal Resolution */ 216#define LCD_Y_RES 320 /* Vertical Resolution */ 217 218#define LCD_BBP 16 /* Bit Per Pixel */ 219 220/* the LCD and the DMA start counting differently; 221 * since one starts at 0 and the other starts at 1, 222 * we have a difference of 1 between START_LINES 223 * and U_LINES. 224 */ 225#define START_LINES 8 /* lines for field flyback or field blanking signal */ 226#define U_LINES 9 /* number of undisplayed blanking lines */ 227 228#define FRAMES_PER_SEC (60) 229 230#define DCLKS_PER_FRAME (FREQ_PPI_CLK/FRAMES_PER_SEC) 231#define DCLKS_PER_LINE (DCLKS_PER_FRAME/(LCD_Y_RES+U_LINES)) 232 233#define PPI_CONFIG_VALUE (PORT_DIR|XFR_TYPE|DLEN_16|POLS) 234#define PPI_DELAY_VALUE (0) 235#define TIMER_CONFIG (PWM_OUT|PERIOD_CNT|TIN_SEL|CLK_SEL) 236 237#define ACTIVE_VIDEO_MEM_OFFSET (LCD_X_RES*START_LINES*(LCD_BBP/8)) 238#define ACTIVE_VIDEO_MEM_SIZE (LCD_Y_RES*LCD_X_RES*(LCD_BBP/8)) 239#define TOTAL_VIDEO_MEM_SIZE ((LCD_Y_RES+U_LINES)*LCD_X_RES*(LCD_BBP/8)) 240#define TOTAL_DMA_DESC_SIZE (2 * sizeof(u32) * (LCD_Y_RES + U_LINES)) 241 242static void start_timers(void) /* CHECK with HW */ 243{ 244 unsigned long flags; 245 246 local_irq_save(flags); 247 248 bfin_write_TIMER_ENABLE(TIMEN_REV); 249 SSYNC(); 250 251 while (bfin_read_TIMER_REV_COUNTER() <= 11) 252 continue; 253 bfin_write_TIMER_ENABLE(TIMEN_LP); 254 SSYNC(); 255 256 while (bfin_read_TIMER_LP_COUNTER() < 3) 257 continue; 258 bfin_write_TIMER_ENABLE(TIMEN_SP|TIMEN_SPS|TIMEN_PS_CLS); 259 SSYNC(); 260 t_conf_done = 1; 261 local_irq_restore(flags); 262} 263 264static void config_timers(void) 265{ 266 /* Stop timers */ 267 bfin_write_TIMER_DISABLE(TIMDIS_SP|TIMDIS_SPS|TIMDIS_REV| 268 TIMDIS_LP|TIMDIS_PS_CLS); 269 SSYNC(); 270 271 /* LP, timer 6 */ 272 bfin_write_TIMER_LP_CONFIG(TIMER_CONFIG|PULSE_HI); 273 bfin_write_TIMER_LP_WIDTH(1); 274 275 bfin_write_TIMER_LP_PERIOD(DCLKS_PER_LINE); 276 SSYNC(); 277 278 /* SPS, timer 1 */ 279 bfin_write_TIMER_SPS_CONFIG(TIMER_CONFIG|PULSE_HI); 280 bfin_write_TIMER_SPS_WIDTH(DCLKS_PER_LINE*2); 281 bfin_write_TIMER_SPS_PERIOD((DCLKS_PER_LINE * (LCD_Y_RES+U_LINES))); 282 SSYNC(); 283 284 /* SP, timer 0 */ 285 bfin_write_TIMER_SP_CONFIG(TIMER_CONFIG|PULSE_HI); 286 bfin_write_TIMER_SP_WIDTH(1); 287 bfin_write_TIMER_SP_PERIOD(DCLKS_PER_LINE); 288 SSYNC(); 289 290 /* PS & CLS, timer 7 */ 291 bfin_write_TIMER_PS_CLS_CONFIG(TIMER_CONFIG); 292 bfin_write_TIMER_PS_CLS_WIDTH(LCD_X_RES + START_LINES); 293 bfin_write_TIMER_PS_CLS_PERIOD(DCLKS_PER_LINE); 294 295 SSYNC(); 296 297#ifdef NO_BL 298 /* REV, timer 5 */ 299 bfin_write_TIMER_REV_CONFIG(TIMER_CONFIG|PULSE_HI); 300 301 bfin_write_TIMER_REV_WIDTH(DCLKS_PER_LINE); 302 bfin_write_TIMER_REV_PERIOD(DCLKS_PER_LINE*2); 303 304 SSYNC(); 305#endif 306} 307 308static void config_ppi(void) 309{ 310 bfin_write_PPI_DELAY(PPI_DELAY_VALUE); 311 bfin_write_PPI_COUNT(LCD_X_RES-1); 312 /* 0x10 -> PORT_CFG -> 2 or 3 frame syncs */ 313 bfin_write_PPI_CONTROL((PPI_CONFIG_VALUE|0x10) & (~POLS)); 314} 315 316static int config_dma(void) 317{ 318 u32 i; 319 320 if (landscape) { 321 322 for (i = 0; i < U_LINES; ++i) { 323 /* blanking lines point to first line of fb_buffer */ 324 dma_desc_table[2*i] = (unsigned long)&dma_desc_table[2*i+2]; 325 dma_desc_table[2*i+1] = (unsigned long)fb_buffer; 326 } 327 328 for (i = U_LINES; i < U_LINES + LCD_Y_RES; ++i) { 329 /* visible lines */ 330 dma_desc_table[2*i] = (unsigned long)&dma_desc_table[2*i+2]; 331 dma_desc_table[2*i+1] = (unsigned long)fb_buffer + 332 (LCD_Y_RES+U_LINES-1-i)*2; 333 } 334 335 /* last descriptor points to first */ 336 dma_desc_table[2*(LCD_Y_RES+U_LINES-1)] = (unsigned long)&dma_desc_table[0]; 337 338 set_dma_x_count(CH_PPI, LCD_X_RES); 339 set_dma_x_modify(CH_PPI, LCD_Y_RES * (LCD_BBP / 8)); 340 set_dma_y_count(CH_PPI, 0); 341 set_dma_y_modify(CH_PPI, 0); 342 set_dma_next_desc_addr(CH_PPI, (void *)dma_desc_table[0]); 343 set_dma_config(CH_PPI, DMAFLOW_LARGE | NDSIZE_4 | WDSIZE_16); 344 345 } else { 346 347 set_dma_config(CH_PPI, set_bfin_dma_config(DIR_READ, 348 DMA_FLOW_AUTO, 349 INTR_DISABLE, 350 DIMENSION_2D, 351 DATA_SIZE_16, 352 DMA_NOSYNC_KEEP_DMA_BUF)); 353 set_dma_x_count(CH_PPI, LCD_X_RES); 354 set_dma_x_modify(CH_PPI, LCD_BBP / 8); 355 set_dma_y_count(CH_PPI, LCD_Y_RES+U_LINES); 356 set_dma_y_modify(CH_PPI, LCD_BBP / 8); 357 set_dma_start_addr(CH_PPI, (unsigned long) fb_buffer); 358 } 359 360 return 0; 361} 362 363static int __devinit request_ports(void) 364{ 365 u16 tmr_req[] = TIMERS; 366 367 /* 368 UD: PF13 369 MOD: PF10 370 LBR: PF14 371 PPI_CLK: PF15 372 */ 373 374 if (peripheral_request_list(ppi_pins, KBUILD_MODNAME)) { 375 pr_err("requesting PPI peripheral failed\n"); 376 return -EBUSY; 377 } 378 379 if (peripheral_request_list(tmr_req, KBUILD_MODNAME)) { 380 peripheral_free_list(ppi_pins); 381 pr_err("requesting timer peripheral failed\n"); 382 return -EBUSY; 383 } 384 385#if (defined(UD) && defined(LBR)) 386 if (gpio_request(UD, KBUILD_MODNAME)) { 387 pr_err("requesting GPIO %d failed\n", UD); 388 return -EBUSY; 389 } 390 391 if (gpio_request(LBR, KBUILD_MODNAME)) { 392 pr_err("requesting GPIO %d failed\n", LBR); 393 gpio_free(UD); 394 return -EBUSY; 395 } 396 397 gpio_direction_output(UD, 0); 398 gpio_direction_output(LBR, 1); 399 400#endif 401 402 if (gpio_request(MOD, KBUILD_MODNAME)) { 403 pr_err("requesting GPIO %d failed\n", MOD); 404#if (defined(UD) && defined(LBR)) 405 gpio_free(LBR); 406 gpio_free(UD); 407#endif 408 return -EBUSY; 409 } 410 411 gpio_direction_output(MOD, 1); 412 413 SSYNC(); 414 return 0; 415} 416 417static void free_ports(void) 418{ 419 u16 tmr_req[] = TIMERS; 420 421 peripheral_free_list(ppi_pins); 422 peripheral_free_list(tmr_req); 423 424#if defined(UD) && defined(LBR) 425 gpio_free(LBR); 426 gpio_free(UD); 427#endif 428 gpio_free(MOD); 429} 430 431static struct fb_info bfin_lq035_fb; 432 433static struct fb_var_screeninfo bfin_lq035_fb_defined = { 434 .bits_per_pixel = LCD_BBP, 435 .activate = FB_ACTIVATE_TEST, 436 .xres = LCD_X_RES, /*default portrait mode RGB*/ 437 .yres = LCD_Y_RES, 438 .xres_virtual = LCD_X_RES, 439 .yres_virtual = LCD_Y_RES, 440 .height = -1, 441 .width = -1, 442 .left_margin = 0, 443 .right_margin = 0, 444 .upper_margin = 0, 445 .lower_margin = 0, 446 .red = {11, 5, 0}, 447 .green = {5, 6, 0}, 448 .blue = {0, 5, 0}, 449 .transp = {0, 0, 0}, 450}; 451 452static struct fb_fix_screeninfo bfin_lq035_fb_fix __devinitdata = { 453 .id = KBUILD_MODNAME, 454 .smem_len = ACTIVE_VIDEO_MEM_SIZE, 455 .type = FB_TYPE_PACKED_PIXELS, 456 .visual = FB_VISUAL_TRUECOLOR, 457 .xpanstep = 0, 458 .ypanstep = 0, 459 .line_length = LCD_X_RES*(LCD_BBP/8), 460 .accel = FB_ACCEL_NONE, 461}; 462 463 464static int bfin_lq035_fb_open(struct fb_info *info, int user) 465{ 466 unsigned long flags; 467 468 spin_lock_irqsave(&bfin_lq035_lock, flags); 469 lq035_open_cnt++; 470 spin_unlock_irqrestore(&bfin_lq035_lock, flags); 471 472 if (lq035_open_cnt <= 1) { 473 bfin_write_PPI_CONTROL(0); 474 SSYNC(); 475 476 set_vcomm(); 477 config_dma(); 478 config_ppi(); 479 480 /* start dma */ 481 enable_dma(CH_PPI); 482 SSYNC(); 483 bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN); 484 SSYNC(); 485 486 if (!t_conf_done) { 487 config_timers(); 488 start_timers(); 489 } 490 /* gpio_set_value(MOD,1); */ 491 } 492 493 return 0; 494} 495 496static int bfin_lq035_fb_release(struct fb_info *info, int user) 497{ 498 unsigned long flags; 499 500 spin_lock_irqsave(&bfin_lq035_lock, flags); 501 lq035_open_cnt--; 502 spin_unlock_irqrestore(&bfin_lq035_lock, flags); 503 504 505 if (lq035_open_cnt <= 0) { 506 507 bfin_write_PPI_CONTROL(0); 508 SSYNC(); 509 510 disable_dma(CH_PPI); 511 } 512 513 return 0; 514} 515 516 517static int bfin_lq035_fb_check_var(struct fb_var_screeninfo *var, 518 struct fb_info *info) 519{ 520 switch (var->bits_per_pixel) { 521 case 16:/* DIRECTCOLOUR, 64k */ 522 var->red.offset = info->var.red.offset; 523 var->green.offset = info->var.green.offset; 524 var->blue.offset = info->var.blue.offset; 525 var->red.length = info->var.red.length; 526 var->green.length = info->var.green.length; 527 var->blue.length = info->var.blue.length; 528 var->transp.offset = 0; 529 var->transp.length = 0; 530 var->transp.msb_right = 0; 531 var->red.msb_right = 0; 532 var->green.msb_right = 0; 533 var->blue.msb_right = 0; 534 break; 535 default: 536 pr_debug("%s: depth not supported: %u BPP\n", __func__, 537 var->bits_per_pixel); 538 return -EINVAL; 539 } 540 541 if (info->var.xres != var->xres || 542 info->var.yres != var->yres || 543 info->var.xres_virtual != var->xres_virtual || 544 info->var.yres_virtual != var->yres_virtual) { 545 pr_debug("%s: Resolution not supported: X%u x Y%u\n", 546 __func__, var->xres, var->yres); 547 return -EINVAL; 548 } 549 550 /* 551 * Memory limit 552 */ 553 554 if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) { 555 pr_debug("%s: Memory Limit requested yres_virtual = %u\n", 556 __func__, var->yres_virtual); 557 return -ENOMEM; 558 } 559 560 return 0; 561} 562 563/* fb_rotate 564 * Rotate the display of this angle. This doesn't seems to be used by the core, 565 * but as our hardware supports it, so why not implementing it... 566 */ 567static void bfin_lq035_fb_rotate(struct fb_info *fbi, int angle) 568{ 569 pr_debug("%s: %p %d", __func__, fbi, angle); 570#if (defined(UD) && defined(LBR)) 571 switch (angle) { 572 573 case 180: 574 gpio_set_value(LBR, 0); 575 gpio_set_value(UD, 1); 576 break; 577 default: 578 gpio_set_value(LBR, 1); 579 gpio_set_value(UD, 0); 580 break; 581 } 582#endif 583} 584 585static int bfin_lq035_fb_cursor(struct fb_info *info, struct fb_cursor *cursor) 586{ 587 if (nocursor) 588 return 0; 589 else 590 return -EINVAL; /* just to force soft_cursor() call */ 591} 592 593static int bfin_lq035_fb_setcolreg(u_int regno, u_int red, u_int green, 594 u_int blue, u_int transp, 595 struct fb_info *info) 596{ 597 if (regno >= NBR_PALETTE) 598 return -EINVAL; 599 600 if (info->var.grayscale) 601 /* grayscale = 0.30*R + 0.59*G + 0.11*B */ 602 red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; 603 604 if (info->fix.visual == FB_VISUAL_TRUECOLOR) { 605 606 u32 value; 607 /* Place color in the pseudopalette */ 608 if (regno > 16) 609 return -EINVAL; 610 611 red >>= (16 - info->var.red.length); 612 green >>= (16 - info->var.green.length); 613 blue >>= (16 - info->var.blue.length); 614 615 value = (red << info->var.red.offset) | 616 (green << info->var.green.offset)| 617 (blue << info->var.blue.offset); 618 value &= 0xFFFF; 619 620 ((u32 *) (info->pseudo_palette))[regno] = value; 621 622 } 623 624 return 0; 625} 626 627static struct fb_ops bfin_lq035_fb_ops = { 628 .owner = THIS_MODULE, 629 .fb_open = bfin_lq035_fb_open, 630 .fb_release = bfin_lq035_fb_release, 631 .fb_check_var = bfin_lq035_fb_check_var, 632 .fb_rotate = bfin_lq035_fb_rotate, 633 .fb_fillrect = cfb_fillrect, 634 .fb_copyarea = cfb_copyarea, 635 .fb_imageblit = cfb_imageblit, 636 .fb_cursor = bfin_lq035_fb_cursor, 637 .fb_setcolreg = bfin_lq035_fb_setcolreg, 638}; 639 640static int bl_get_brightness(struct backlight_device *bd) 641{ 642 return current_brightness; 643} 644 645static const struct backlight_ops bfin_lq035fb_bl_ops = { 646 .get_brightness = bl_get_brightness, 647}; 648 649static struct backlight_device *bl_dev; 650 651static int bfin_lcd_get_power(struct lcd_device *dev) 652{ 653 return 0; 654} 655 656static int bfin_lcd_set_power(struct lcd_device *dev, int power) 657{ 658 return 0; 659} 660 661static int bfin_lcd_get_contrast(struct lcd_device *dev) 662{ 663 return (int)vcomm_value; 664} 665 666static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast) 667{ 668 if (contrast > 255) 669 contrast = 255; 670 if (contrast < 0) 671 contrast = 0; 672 673 vcomm_value = (unsigned char)contrast; 674 set_vcomm(); 675 return 0; 676} 677 678static int bfin_lcd_check_fb(struct lcd_device *lcd, struct fb_info *fi) 679{ 680 if (!fi || (fi == &bfin_lq035_fb)) 681 return 1; 682 return 0; 683} 684 685static struct lcd_ops bfin_lcd_ops = { 686 .get_power = bfin_lcd_get_power, 687 .set_power = bfin_lcd_set_power, 688 .get_contrast = bfin_lcd_get_contrast, 689 .set_contrast = bfin_lcd_set_contrast, 690 .check_fb = bfin_lcd_check_fb, 691}; 692 693static struct lcd_device *lcd_dev; 694 695static int __devinit bfin_lq035_probe(struct platform_device *pdev) 696{ 697 struct backlight_properties props; 698 dma_addr_t dma_handle; 699 int ret; 700 701 if (request_dma(CH_PPI, KBUILD_MODNAME)) { 702 pr_err("couldn't request PPI DMA\n"); 703 return -EFAULT; 704 } 705 706 if (request_ports()) { 707 pr_err("couldn't request gpio port\n"); 708 ret = -EFAULT; 709 goto out_ports; 710 } 711 712 fb_buffer = dma_alloc_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, 713 &dma_handle, GFP_KERNEL); 714 if (fb_buffer == NULL) { 715 pr_err("couldn't allocate dma buffer\n"); 716 ret = -ENOMEM; 717 goto out_dma_coherent; 718 } 719 720 if (L1_DATA_A_LENGTH) 721 dma_desc_table = l1_data_sram_zalloc(TOTAL_DMA_DESC_SIZE); 722 else 723 dma_desc_table = dma_alloc_coherent(NULL, TOTAL_DMA_DESC_SIZE, 724 &dma_handle, 0); 725 726 if (dma_desc_table == NULL) { 727 pr_err("couldn't allocate dma descriptor\n"); 728 ret = -ENOMEM; 729 goto out_table; 730 } 731 732 bfin_lq035_fb.screen_base = (void *)fb_buffer; 733 bfin_lq035_fb_fix.smem_start = (int)fb_buffer; 734 if (landscape) { 735 bfin_lq035_fb_defined.xres = LCD_Y_RES; 736 bfin_lq035_fb_defined.yres = LCD_X_RES; 737 bfin_lq035_fb_defined.xres_virtual = LCD_Y_RES; 738 bfin_lq035_fb_defined.yres_virtual = LCD_X_RES; 739 740 bfin_lq035_fb_fix.line_length = LCD_Y_RES*(LCD_BBP/8); 741 } else { 742 bfin_lq035_fb.screen_base += ACTIVE_VIDEO_MEM_OFFSET; 743 bfin_lq035_fb_fix.smem_start += ACTIVE_VIDEO_MEM_OFFSET; 744 } 745 746 bfin_lq035_fb_defined.green.msb_right = 0; 747 bfin_lq035_fb_defined.red.msb_right = 0; 748 bfin_lq035_fb_defined.blue.msb_right = 0; 749 bfin_lq035_fb_defined.green.offset = 5; 750 bfin_lq035_fb_defined.green.length = 6; 751 bfin_lq035_fb_defined.red.length = 5; 752 bfin_lq035_fb_defined.blue.length = 5; 753 754 if (bgr) { 755 bfin_lq035_fb_defined.red.offset = 0; 756 bfin_lq035_fb_defined.blue.offset = 11; 757 } else { 758 bfin_lq035_fb_defined.red.offset = 11; 759 bfin_lq035_fb_defined.blue.offset = 0; 760 } 761 762 bfin_lq035_fb.fbops = &bfin_lq035_fb_ops; 763 bfin_lq035_fb.var = bfin_lq035_fb_defined; 764 765 bfin_lq035_fb.fix = bfin_lq035_fb_fix; 766 bfin_lq035_fb.flags = FBINFO_DEFAULT; 767 768 769 bfin_lq035_fb.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL); 770 if (bfin_lq035_fb.pseudo_palette == NULL) { 771 pr_err("failed to allocate pseudo_palette\n"); 772 ret = -ENOMEM; 773 goto out_palette; 774 } 775 776 if (fb_alloc_cmap(&bfin_lq035_fb.cmap, NBR_PALETTE, 0) < 0) { 777 pr_err("failed to allocate colormap (%d entries)\n", 778 NBR_PALETTE); 779 ret = -EFAULT; 780 goto out_cmap; 781 } 782 783 if (register_framebuffer(&bfin_lq035_fb) < 0) { 784 pr_err("unable to register framebuffer\n"); 785 ret = -EINVAL; 786 goto out_reg; 787 } 788 789 i2c_add_driver(&ad5280_driver); 790 791 memset(&props, 0, sizeof(props)); 792 props.type = BACKLIGHT_RAW; 793 props.max_brightness = MAX_BRIGHENESS; 794 bl_dev = backlight_device_register("bf537-bl", NULL, NULL, 795 &bfin_lq035fb_bl_ops, &props); 796 797 lcd_dev = lcd_device_register(KBUILD_MODNAME, &pdev->dev, NULL, 798 &bfin_lcd_ops); 799 if (IS_ERR(lcd_dev)) { 800 pr_err("unable to register lcd\n"); 801 ret = PTR_ERR(lcd_dev); 802 goto out_lcd; 803 } 804 lcd_dev->props.max_contrast = 255, 805 806 pr_info("initialized"); 807 808 return 0; 809out_lcd: 810 unregister_framebuffer(&bfin_lq035_fb); 811out_reg: 812 fb_dealloc_cmap(&bfin_lq035_fb.cmap); 813out_cmap: 814 kfree(bfin_lq035_fb.pseudo_palette); 815out_palette: 816out_table: 817 dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0); 818 fb_buffer = NULL; 819out_dma_coherent: 820 free_ports(); 821out_ports: 822 free_dma(CH_PPI); 823 return ret; 824} 825 826static int __devexit bfin_lq035_remove(struct platform_device *pdev) 827{ 828 if (fb_buffer != NULL) 829 dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0); 830 831 if (L1_DATA_A_LENGTH) 832 l1_data_sram_free(dma_desc_table); 833 else 834 dma_free_coherent(NULL, TOTAL_DMA_DESC_SIZE, NULL, 0); 835 836 bfin_write_TIMER_DISABLE(TIMEN_SP|TIMEN_SPS|TIMEN_PS_CLS| 837 TIMEN_LP|TIMEN_REV); 838 t_conf_done = 0; 839 840 free_dma(CH_PPI); 841 842 843 kfree(bfin_lq035_fb.pseudo_palette); 844 fb_dealloc_cmap(&bfin_lq035_fb.cmap); 845 846 847 lcd_device_unregister(lcd_dev); 848 backlight_device_unregister(bl_dev); 849 850 unregister_framebuffer(&bfin_lq035_fb); 851 i2c_del_driver(&ad5280_driver); 852 853 free_ports(); 854 855 pr_info("unregistered LCD driver\n"); 856 857 return 0; 858} 859 860#ifdef CONFIG_PM 861static int bfin_lq035_suspend(struct platform_device *pdev, pm_message_t state) 862{ 863 if (lq035_open_cnt > 0) { 864 bfin_write_PPI_CONTROL(0); 865 SSYNC(); 866 disable_dma(CH_PPI); 867 } 868 869 return 0; 870} 871 872static int bfin_lq035_resume(struct platform_device *pdev) 873{ 874 if (lq035_open_cnt > 0) { 875 bfin_write_PPI_CONTROL(0); 876 SSYNC(); 877 878 config_dma(); 879 config_ppi(); 880 881 enable_dma(CH_PPI); 882 bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN); 883 SSYNC(); 884 885 config_timers(); 886 start_timers(); 887 } else { 888 t_conf_done = 0; 889 } 890 891 return 0; 892} 893#else 894# define bfin_lq035_suspend NULL 895# define bfin_lq035_resume NULL 896#endif 897 898static struct platform_driver bfin_lq035_driver = { 899 .probe = bfin_lq035_probe, 900 .remove = __devexit_p(bfin_lq035_remove), 901 .suspend = bfin_lq035_suspend, 902 .resume = bfin_lq035_resume, 903 .driver = { 904 .name = KBUILD_MODNAME, 905 .owner = THIS_MODULE, 906 }, 907}; 908 909static int __init bfin_lq035_driver_init(void) 910{ 911 request_module("i2c-bfin-twi"); 912 return platform_driver_register(&bfin_lq035_driver); 913} 914module_init(bfin_lq035_driver_init); 915 916static void __exit bfin_lq035_driver_cleanup(void) 917{ 918 platform_driver_unregister(&bfin_lq035_driver); 919} 920module_exit(bfin_lq035_driver_cleanup); 921 922MODULE_DESCRIPTION("SHARP LQ035Q7DB03 TFT LCD Driver"); 923MODULE_LICENSE("GPL");