tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/dts-v1/;
2
3#include "kirkwood.dtsi"
4#include "kirkwood-6281.dtsi"
5
6/ {
7 model = "Seagate FreeAgent Dockstar";
8 compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
9
10 memory {
11 device_type = "memory";
12 reg = <0x00000000 0x8000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
17 };
18
19 ocp@f1000000 {
20 pinctrl: pinctrl@10000 {
21 pmx_usb_power_enable: pmx-usb-power-enable {
22 marvell,pins = "mpp29";
23 marvell,function = "gpio";
24 };
25 pmx_led_green: pmx-led-green {
26 marvell,pins = "mpp46";
27 marvell,function = "gpio";
28 };
29 pmx_led_orange: pmx-led-orange {
30 marvell,pins = "mpp47";
31 marvell,function = "gpio";
32 };
33 };
34 serial@12000 {
35 status = "ok"
36 };
37 };
38 gpio-leds {
39 compatible = "gpio-leds";
40 pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
41 pinctrl-names = "default";
42
43 health {
44 label = "status:green:health";
45 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
46 default-state = "keep";
47 };
48 fault {
49 label = "status:orange:fault";
50 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
51 };
52 };
53 regulators {
54 compatible = "simple-bus";
55 #address-cells = <1>;
56 #size-cells = <0>;
57 pinctrl-0 = <&pmx_usb_power_enable>;
58 pinctrl-names = "default";
59
60 usb_power: regulator@1 {
61 compatible = "regulator-fixed";
62 reg = <1>;
63 regulator-name = "USB Power";
64 regulator-min-microvolt = <5000000>;
65 regulator-max-microvolt = <5000000>;
66 enable-active-high;
67 regulator-always-on;
68 regulator-boot-on;
69 gpio = <&gpio0 29 0>;
70 };
71 };
72};
73
74&nand {
75 status = "okay";
76
77 partition@0 {
78 label = "u-boot";
79 reg = <0x0000000 0x100000>;
80 read-only;
81 };
82
83 partition@100000 {
84 label = "uImage";
85 reg = <0x0100000 0x400000>;
86 };
87
88 partition@500000 {
89 label = "data";
90 reg = <0x0500000 0xfb00000>;
91 };
92};
93
94&mdio {
95 status = "okay";
96
97 ethphy0: ethernet-phy@0 {
98 compatible = "marvell,88e1116";
99 reg = <0>;
100 };
101};
102
103ð0 {
104 status = "okay";
105 ethernet0-port@0 {
106 phy-handle = <ðphy0>;
107 };
108};