Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/*
2 * Copyright (c) 2001-2002 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19#ifndef __USB_CORE_HCD_H
20#define __USB_CORE_HCD_H
21
22#ifdef __KERNEL__
23
24#include <linux/rwsem.h>
25#include <linux/interrupt.h>
26
27#define MAX_TOPO_LEVEL 6
28
29/* This file contains declarations of usbcore internals that are mostly
30 * used or exposed by Host Controller Drivers.
31 */
32
33/*
34 * USB Packet IDs (PIDs)
35 */
36#define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
37#define USB_PID_OUT 0xe1
38#define USB_PID_ACK 0xd2
39#define USB_PID_DATA0 0xc3
40#define USB_PID_PING 0xb4 /* USB 2.0 */
41#define USB_PID_SOF 0xa5
42#define USB_PID_NYET 0x96 /* USB 2.0 */
43#define USB_PID_DATA2 0x87 /* USB 2.0 */
44#define USB_PID_SPLIT 0x78 /* USB 2.0 */
45#define USB_PID_IN 0x69
46#define USB_PID_NAK 0x5a
47#define USB_PID_DATA1 0x4b
48#define USB_PID_PREAMBLE 0x3c /* Token mode */
49#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
50#define USB_PID_SETUP 0x2d
51#define USB_PID_STALL 0x1e
52#define USB_PID_MDATA 0x0f /* USB 2.0 */
53
54/*-------------------------------------------------------------------------*/
55
56/*
57 * USB Host Controller Driver (usb_hcd) framework
58 *
59 * Since "struct usb_bus" is so thin, you can't share much code in it.
60 * This framework is a layer over that, and should be more sharable.
61 *
62 * @authorized_default: Specifies if new devices are authorized to
63 * connect by default or they require explicit
64 * user space authorization; this bit is settable
65 * through /sys/class/usb_host/X/authorized_default.
66 * For the rest is RO, so we don't lock to r/w it.
67 */
68
69/*-------------------------------------------------------------------------*/
70
71struct giveback_urb_bh {
72 bool running;
73 spinlock_t lock;
74 struct list_head head;
75 struct tasklet_struct bh;
76 struct usb_host_endpoint *completing_ep;
77};
78
79struct usb_hcd {
80
81 /*
82 * housekeeping
83 */
84 struct usb_bus self; /* hcd is-a bus */
85 struct kref kref; /* reference counter */
86
87 const char *product_desc; /* product/vendor string */
88 int speed; /* Speed for this roothub.
89 * May be different from
90 * hcd->driver->flags & HCD_MASK
91 */
92 char irq_descr[24]; /* driver + bus # */
93
94 struct timer_list rh_timer; /* drives root-hub polling */
95 struct urb *status_urb; /* the current status urb */
96#ifdef CONFIG_PM_RUNTIME
97 struct work_struct wakeup_work; /* for remote wakeup */
98#endif
99
100 /*
101 * hardware info/state
102 */
103 const struct hc_driver *driver; /* hw-specific hooks */
104
105 /*
106 * OTG and some Host controllers need software interaction with phys;
107 * other external phys should be software-transparent
108 */
109 struct usb_phy *phy;
110
111 /* Flags that need to be manipulated atomically because they can
112 * change while the host controller is running. Always use
113 * set_bit() or clear_bit() to change their values.
114 */
115 unsigned long flags;
116#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
117#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
118#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
119#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
120#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
121#define HCD_FLAG_DEAD 6 /* controller has died? */
122
123 /* The flags can be tested using these macros; they are likely to
124 * be slightly faster than test_bit().
125 */
126#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
127#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
128#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
129#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
130#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
131#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
132
133 /* Flags that get set only during HCD registration or removal. */
134 unsigned rh_registered:1;/* is root hub registered? */
135 unsigned rh_pollable:1; /* may we poll the root hub? */
136 unsigned msix_enabled:1; /* driver has MSI-X enabled? */
137
138 /* The next flag is a stopgap, to be removed when all the HCDs
139 * support the new root-hub polling mechanism. */
140 unsigned uses_new_polling:1;
141 unsigned wireless:1; /* Wireless USB HCD */
142 unsigned authorized_default:1;
143 unsigned has_tt:1; /* Integrated TT in root hub */
144 unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */
145
146 unsigned int irq; /* irq allocated */
147 void __iomem *regs; /* device memory/io */
148 resource_size_t rsrc_start; /* memory/io resource start */
149 resource_size_t rsrc_len; /* memory/io resource length */
150 unsigned power_budget; /* in mA, 0 = no limit */
151
152 struct giveback_urb_bh high_prio_bh;
153 struct giveback_urb_bh low_prio_bh;
154
155 /* bandwidth_mutex should be taken before adding or removing
156 * any new bus bandwidth constraints:
157 * 1. Before adding a configuration for a new device.
158 * 2. Before removing the configuration to put the device into
159 * the addressed state.
160 * 3. Before selecting a different configuration.
161 * 4. Before selecting an alternate interface setting.
162 *
163 * bandwidth_mutex should be dropped after a successful control message
164 * to the device, or resetting the bandwidth after a failed attempt.
165 */
166 struct mutex *bandwidth_mutex;
167 struct usb_hcd *shared_hcd;
168 struct usb_hcd *primary_hcd;
169
170
171#define HCD_BUFFER_POOLS 4
172 struct dma_pool *pool[HCD_BUFFER_POOLS];
173
174 int state;
175# define __ACTIVE 0x01
176# define __SUSPEND 0x04
177# define __TRANSIENT 0x80
178
179# define HC_STATE_HALT 0
180# define HC_STATE_RUNNING (__ACTIVE)
181# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
182# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
183# define HC_STATE_SUSPENDED (__SUSPEND)
184
185#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
186#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
187
188 /* more shared queuing code would be good; it should support
189 * smarter scheduling, handle transaction translators, etc;
190 * input size of periodic table to an interrupt scheduler.
191 * (ohci 32, uhci 1024, ehci 256/512/1024).
192 */
193
194 /* The HC driver's private data is stored at the end of
195 * this structure.
196 */
197 unsigned long hcd_priv[0]
198 __attribute__ ((aligned(sizeof(s64))));
199};
200
201/* 2.4 does this a bit differently ... */
202static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
203{
204 return &hcd->self;
205}
206
207static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
208{
209 return container_of(bus, struct usb_hcd, self);
210}
211
212struct hcd_timeout { /* timeouts we allocate */
213 struct list_head timeout_list;
214 struct timer_list timer;
215};
216
217/*-------------------------------------------------------------------------*/
218
219
220struct hc_driver {
221 const char *description; /* "ehci-hcd" etc */
222 const char *product_desc; /* product/vendor string */
223 size_t hcd_priv_size; /* size of private data */
224
225 /* irq handler */
226 irqreturn_t (*irq) (struct usb_hcd *hcd);
227
228 int flags;
229#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
230#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
231#define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
232#define HCD_USB11 0x0010 /* USB 1.1 */
233#define HCD_USB2 0x0020 /* USB 2.0 */
234#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/
235#define HCD_USB3 0x0040 /* USB 3.0 */
236#define HCD_MASK 0x0070
237#define HCD_BH 0x0100 /* URB complete in BH context */
238
239 /* called to init HCD and root hub */
240 int (*reset) (struct usb_hcd *hcd);
241 int (*start) (struct usb_hcd *hcd);
242
243 /* NOTE: these suspend/resume calls relate to the HC as
244 * a whole, not just the root hub; they're for PCI bus glue.
245 */
246 /* called after suspending the hub, before entering D3 etc */
247 int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
248
249 /* called after entering D0 (etc), before resuming the hub */
250 int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
251
252 /* cleanly make HCD stop writing memory and doing I/O */
253 void (*stop) (struct usb_hcd *hcd);
254
255 /* shutdown HCD */
256 void (*shutdown) (struct usb_hcd *hcd);
257
258 /* return current frame number */
259 int (*get_frame_number) (struct usb_hcd *hcd);
260
261 /* manage i/o requests, device state */
262 int (*urb_enqueue)(struct usb_hcd *hcd,
263 struct urb *urb, gfp_t mem_flags);
264 int (*urb_dequeue)(struct usb_hcd *hcd,
265 struct urb *urb, int status);
266
267 /*
268 * (optional) these hooks allow an HCD to override the default DMA
269 * mapping and unmapping routines. In general, they shouldn't be
270 * necessary unless the host controller has special DMA requirements,
271 * such as alignment contraints. If these are not specified, the
272 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
273 * (and it may be a good idea to call these functions in your HCD
274 * implementation)
275 */
276 int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
277 gfp_t mem_flags);
278 void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
279
280 /* hw synch, freeing endpoint resources that urb_dequeue can't */
281 void (*endpoint_disable)(struct usb_hcd *hcd,
282 struct usb_host_endpoint *ep);
283
284 /* (optional) reset any endpoint state such as sequence number
285 and current window */
286 void (*endpoint_reset)(struct usb_hcd *hcd,
287 struct usb_host_endpoint *ep);
288
289 /* root hub support */
290 int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
291 int (*hub_control) (struct usb_hcd *hcd,
292 u16 typeReq, u16 wValue, u16 wIndex,
293 char *buf, u16 wLength);
294 int (*bus_suspend)(struct usb_hcd *);
295 int (*bus_resume)(struct usb_hcd *);
296 int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
297
298 /* force handover of high-speed port to full-speed companion */
299 void (*relinquish_port)(struct usb_hcd *, int);
300 /* has a port been handed over to a companion? */
301 int (*port_handed_over)(struct usb_hcd *, int);
302
303 /* CLEAR_TT_BUFFER completion callback */
304 void (*clear_tt_buffer_complete)(struct usb_hcd *,
305 struct usb_host_endpoint *);
306
307 /* xHCI specific functions */
308 /* Called by usb_alloc_dev to alloc HC device structures */
309 int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
310 /* Called by usb_disconnect to free HC device structures */
311 void (*free_dev)(struct usb_hcd *, struct usb_device *);
312 /* Change a group of bulk endpoints to support multiple stream IDs */
313 int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
314 struct usb_host_endpoint **eps, unsigned int num_eps,
315 unsigned int num_streams, gfp_t mem_flags);
316 /* Reverts a group of bulk endpoints back to not using stream IDs.
317 * Can fail if we run out of memory.
318 */
319 int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
320 struct usb_host_endpoint **eps, unsigned int num_eps,
321 gfp_t mem_flags);
322
323 /* Bandwidth computation functions */
324 /* Note that add_endpoint() can only be called once per endpoint before
325 * check_bandwidth() or reset_bandwidth() must be called.
326 * drop_endpoint() can only be called once per endpoint also.
327 * A call to xhci_drop_endpoint() followed by a call to
328 * xhci_add_endpoint() will add the endpoint to the schedule with
329 * possibly new parameters denoted by a different endpoint descriptor
330 * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a
331 * call to xhci_drop_endpoint() is not allowed.
332 */
333 /* Allocate endpoint resources and add them to a new schedule */
334 int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
335 struct usb_host_endpoint *);
336 /* Drop an endpoint from a new schedule */
337 int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
338 struct usb_host_endpoint *);
339 /* Check that a new hardware configuration, set using
340 * endpoint_enable and endpoint_disable, does not exceed bus
341 * bandwidth. This must be called before any set configuration
342 * or set interface requests are sent to the device.
343 */
344 int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
345 /* Reset the device schedule to the last known good schedule,
346 * which was set from a previous successful call to
347 * check_bandwidth(). This reverts any add_endpoint() and
348 * drop_endpoint() calls since that last successful call.
349 * Used for when a check_bandwidth() call fails due to resource
350 * or bandwidth constraints.
351 */
352 void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
353 /* Returns the hardware-chosen device address */
354 int (*address_device)(struct usb_hcd *, struct usb_device *udev);
355 /* Notifies the HCD after a hub descriptor is fetched.
356 * Will block.
357 */
358 int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
359 struct usb_tt *tt, gfp_t mem_flags);
360 int (*reset_device)(struct usb_hcd *, struct usb_device *);
361 /* Notifies the HCD after a device is connected and its
362 * address is set
363 */
364 int (*update_device)(struct usb_hcd *, struct usb_device *);
365 int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
366 /* USB 3.0 Link Power Management */
367 /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
368 int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
369 struct usb_device *, enum usb3_link_state state);
370 /* The xHCI host controller can still fail the command to
371 * disable the LPM timeouts, so this can return an error code.
372 */
373 int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
374 struct usb_device *, enum usb3_link_state state);
375 int (*find_raw_port_number)(struct usb_hcd *, int);
376};
377
378static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
379{
380 return hcd->driver->flags & HCD_BH;
381}
382
383static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
384 struct usb_host_endpoint *ep)
385{
386 return hcd->high_prio_bh.completing_ep == ep;
387}
388
389extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
390extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
391 int status);
392extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
393
394extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
395extern int usb_hcd_unlink_urb(struct urb *urb, int status);
396extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
397 int status);
398extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
399 gfp_t mem_flags);
400extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
401extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
402extern void usb_hcd_flush_endpoint(struct usb_device *udev,
403 struct usb_host_endpoint *ep);
404extern void usb_hcd_disable_endpoint(struct usb_device *udev,
405 struct usb_host_endpoint *ep);
406extern void usb_hcd_reset_endpoint(struct usb_device *udev,
407 struct usb_host_endpoint *ep);
408extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
409extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
410 struct usb_host_config *new_config,
411 struct usb_host_interface *old_alt,
412 struct usb_host_interface *new_alt);
413extern int usb_hcd_get_frame_number(struct usb_device *udev);
414
415extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
416 struct device *dev, const char *bus_name);
417extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
418 struct device *dev, const char *bus_name,
419 struct usb_hcd *shared_hcd);
420extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
421extern void usb_put_hcd(struct usb_hcd *hcd);
422extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
423extern int usb_add_hcd(struct usb_hcd *hcd,
424 unsigned int irqnum, unsigned long irqflags);
425extern void usb_remove_hcd(struct usb_hcd *hcd);
426extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
427
428struct platform_device;
429extern void usb_hcd_platform_shutdown(struct platform_device *dev);
430
431#ifdef CONFIG_PCI
432struct pci_dev;
433struct pci_device_id;
434extern int usb_hcd_pci_probe(struct pci_dev *dev,
435 const struct pci_device_id *id);
436extern void usb_hcd_pci_remove(struct pci_dev *dev);
437extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
438
439extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
440
441#ifdef CONFIG_PM
442extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
443#endif
444#endif /* CONFIG_PCI */
445
446/* pci-ish (pdev null is ok) buffer alloc/mapping support */
447int hcd_buffer_create(struct usb_hcd *hcd);
448void hcd_buffer_destroy(struct usb_hcd *hcd);
449
450void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
451 gfp_t mem_flags, dma_addr_t *dma);
452void hcd_buffer_free(struct usb_bus *bus, size_t size,
453 void *addr, dma_addr_t dma);
454
455/* generic bus glue, needed for host controllers that don't use PCI */
456extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
457
458extern void usb_hc_died(struct usb_hcd *hcd);
459extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
460extern void usb_wakeup_notification(struct usb_device *hdev,
461 unsigned int portnum);
462
463extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
464extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
465
466/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
467#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
468#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
469#define usb_settoggle(dev, ep, out, bit) \
470 ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
471 ((bit) << (ep)))
472
473/* -------------------------------------------------------------------------- */
474
475/* Enumeration is only for the hub driver, or HCD virtual root hubs */
476extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
477 struct usb_bus *, unsigned port);
478extern int usb_new_device(struct usb_device *dev);
479extern void usb_disconnect(struct usb_device **);
480
481extern int usb_get_configuration(struct usb_device *dev);
482extern void usb_destroy_configuration(struct usb_device *dev);
483
484/*-------------------------------------------------------------------------*/
485
486/*
487 * HCD Root Hub support
488 */
489
490#include <linux/usb/ch11.h>
491
492/*
493 * As of USB 2.0, full/low speed devices are segregated into trees.
494 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
495 * The other type grows from high speed hubs when they connect to
496 * full/low speed devices using "Transaction Translators" (TTs).
497 *
498 * TTs should only be known to the hub driver, and high speed bus
499 * drivers (only EHCI for now). They affect periodic scheduling and
500 * sometimes control/bulk error recovery.
501 */
502
503struct usb_device;
504
505struct usb_tt {
506 struct usb_device *hub; /* upstream highspeed hub */
507 int multi; /* true means one TT per port */
508 unsigned think_time; /* think time in ns */
509 void *hcpriv; /* HCD private data */
510
511 /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
512 spinlock_t lock;
513 struct list_head clear_list; /* of usb_tt_clear */
514 struct work_struct clear_work;
515};
516
517struct usb_tt_clear {
518 struct list_head clear_list;
519 unsigned tt;
520 u16 devinfo;
521 struct usb_hcd *hcd;
522 struct usb_host_endpoint *ep;
523};
524
525extern int usb_hub_clear_tt_buffer(struct urb *urb);
526extern void usb_ep0_reinit(struct usb_device *);
527
528/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
529#define DeviceRequest \
530 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
531#define DeviceOutRequest \
532 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
533
534#define InterfaceRequest \
535 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
536
537#define EndpointRequest \
538 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
539#define EndpointOutRequest \
540 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
541
542/* class requests from the USB 2.0 hub spec, table 11-15 */
543/* GetBusState and SetHubDescriptor are optional, omitted */
544#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
545#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
546#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
547#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
548#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
549#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
550#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
551
552
553/*-------------------------------------------------------------------------*/
554
555/* class requests from USB 3.0 hub spec, table 10-5 */
556#define SetHubDepth (0x3000 | HUB_SET_DEPTH)
557#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT)
558
559/*
560 * Generic bandwidth allocation constants/support
561 */
562#define FRAME_TIME_USECS 1000L
563#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
564 /* Trying not to use worst-case bit-stuffing
565 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
566 /* bytecount = data payload byte count */
567
568#define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L)
569 /* convert nanoseconds to microseconds, rounding up */
570
571/*
572 * Full/low speed bandwidth allocation constants/support.
573 */
574#define BW_HOST_DELAY 1000L /* nanoseconds */
575#define BW_HUB_LS_SETUP 333L /* nanoseconds */
576 /* 4 full-speed bit times (est.) */
577
578#define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
579#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
580#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
581
582/*
583 * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
584 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
585 * to preallocate bandwidth)
586 */
587#define USB2_HOST_DELAY 5 /* nsec, guess */
588#define HS_NSECS(bytes) (((55 * 8 * 2083) \
589 + (2083UL * (3 + BitTime(bytes))))/1000 \
590 + USB2_HOST_DELAY)
591#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
592 + (2083UL * (3 + BitTime(bytes))))/1000 \
593 + USB2_HOST_DELAY)
594#define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
595#define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
596
597extern long usb_calc_bus_time(int speed, int is_input,
598 int isoc, int bytecount);
599
600/*-------------------------------------------------------------------------*/
601
602extern void usb_set_device_state(struct usb_device *udev,
603 enum usb_device_state new_state);
604
605/*-------------------------------------------------------------------------*/
606
607/* exported only within usbcore */
608
609extern struct list_head usb_bus_list;
610extern struct mutex usb_bus_list_lock;
611extern wait_queue_head_t usb_kill_urb_queue;
612
613extern int usb_find_interface_driver(struct usb_device *dev,
614 struct usb_interface *interface);
615
616#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
617
618#ifdef CONFIG_PM
619extern void usb_root_hub_lost_power(struct usb_device *rhdev);
620extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
621extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
622#endif /* CONFIG_PM */
623
624#ifdef CONFIG_PM_RUNTIME
625extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
626#else
627static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
628{
629 return;
630}
631#endif /* CONFIG_PM_RUNTIME */
632
633/*-------------------------------------------------------------------------*/
634
635#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
636
637struct usb_mon_operations {
638 void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
639 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
640 void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
641 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
642};
643
644extern struct usb_mon_operations *mon_ops;
645
646static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
647{
648 if (bus->monitored)
649 (*mon_ops->urb_submit)(bus, urb);
650}
651
652static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
653 int error)
654{
655 if (bus->monitored)
656 (*mon_ops->urb_submit_error)(bus, urb, error);
657}
658
659static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
660 int status)
661{
662 if (bus->monitored)
663 (*mon_ops->urb_complete)(bus, urb, status);
664}
665
666int usb_mon_register(struct usb_mon_operations *ops);
667void usb_mon_deregister(void);
668
669#else
670
671static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
672static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
673 int error) {}
674static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
675 int status) {}
676
677#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
678
679/*-------------------------------------------------------------------------*/
680
681/* random stuff */
682
683#define RUN_CONTEXT (in_irq() ? "in_irq" \
684 : (in_interrupt() ? "in_interrupt" : "can sleep"))
685
686
687/* This rwsem is for use only by the hub driver and ehci-hcd.
688 * Nobody else should touch it.
689 */
690extern struct rw_semaphore ehci_cf_port_reset_rwsem;
691
692/* Keep track of which host controller drivers are loaded */
693#define USB_UHCI_LOADED 0
694#define USB_OHCI_LOADED 1
695#define USB_EHCI_LOADED 2
696extern unsigned long usb_hcds_loaded;
697
698#endif /* __KERNEL__ */
699
700#endif /* __USB_CORE_HCD_H */