tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs
3 *
4 * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
5 *
6 * Licensed under GPLv2
7 */
8
9#include "kirkwood.dtsi"
10#include "kirkwood-6281.dtsi"
11
12/ {
13 memory {
14 device_type = "memory";
15 reg = <0x00000000 0x20000000>;
16 };
17
18 chosen {
19 bootargs = "console=ttyS0,115200n8 earlyprintk";
20 };
21
22 ocp@f1000000 {
23 pinctrl: pinctrl@10000 {
24
25 pmx_usb_power_enable: pmx-usb-power-enable {
26 marvell,pins = "mpp29";
27 marvell,function = "gpio";
28 };
29 pmx_led_red: pmx-led-red {
30 marvell,pins = "mpp46";
31 marvell,function = "gpio";
32 };
33 pmx_led_blue: pmx-led-blue {
34 marvell,pins = "mpp49";
35 marvell,function = "gpio";
36 };
37 pmx_sdio_cd: pmx-sdio-cd {
38 marvell,pins = "mpp44";
39 marvell,function = "gpio";
40 };
41 pmx_sdio_wp: pmx-sdio-wp {
42 marvell,pins = "mpp47";
43 marvell,function = "gpio";
44 };
45 };
46 serial@12000 {
47 pinctrl-0 = <&pmx_uart0>;
48 pinctrl-names = "default";
49 status = "okay";
50 };
51
52 nand@3000000 {
53 pinctrl-0 = <&pmx_nand>;
54 pinctrl-names = "default";
55 status = "okay";
56
57 partition@0 {
58 label = "u-boot";
59 reg = <0x0000000 0x100000>;
60 };
61
62 partition@100000 {
63 label = "uImage";
64 reg = <0x0100000 0x400000>;
65 };
66
67 partition@500000 {
68 label = "root";
69 reg = <0x0500000 0x1fb00000>;
70 };
71 };
72 };
73
74 regulators {
75 compatible = "simple-bus";
76 #address-cells = <1>;
77 #size-cells = <0>;
78 pinctrl-0 = <&pmx_usb_power_enable>;
79 pinctrl-names = "default";
80
81 usb_power: regulator@1 {
82 compatible = "regulator-fixed";
83 reg = <1>;
84 regulator-name = "USB Power";
85 regulator-min-microvolt = <5000000>;
86 regulator-max-microvolt = <5000000>;
87 enable-active-high;
88 regulator-always-on;
89 regulator-boot-on;
90 gpio = <&gpio0 29 0>;
91 };
92 };
93};
94
95&mdio {
96 status = "okay";
97
98 ethphy0: ethernet-phy@0 {
99 device_type = "ethernet-phy";
100 reg = <0>;
101 };
102};
103
104ð0 {
105 status = "okay";
106 ethernet0-port@0 {
107 phy-handle = <ðphy0>;
108 };
109};