tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
8 */
9
10/*
11 * Carveout for multimedia usecases
12 * It should be the last 48MB of the first 512MB memory part
13 * In theory, it should not even exist. That zone should be reserved
14 * dynamically during the .reserve callback.
15 */
16/memreserve/ 0x9d000000 0x03000000;
17
18/include/ "skeleton.dtsi"
19
20/ {
21 #address-cells = <1>;
22 #size-cells = <1>;
23
24 compatible = "ti,omap5";
25 interrupt-parent = <&gic>;
26
27 aliases {
28 serial0 = &uart1;
29 serial1 = &uart2;
30 serial2 = &uart3;
31 serial3 = &uart4;
32 serial4 = &uart5;
33 serial5 = &uart6;
34 };
35
36 cpus {
37 cpu@0 {
38 compatible = "arm,cortex-a15";
39 };
40 cpu@1 {
41 compatible = "arm,cortex-a15";
42 };
43 };
44
45 timer {
46 compatible = "arm,armv7-timer";
47 /* PPI secure/nonsecure IRQ, active low level-sensitive */
48 interrupts = <1 13 0x308>,
49 <1 14 0x308>,
50 <1 11 0x308>,
51 <1 10 0x308>;
52 clock-frequency = <6144000>;
53 };
54
55 gic: interrupt-controller@48211000 {
56 compatible = "arm,cortex-a15-gic";
57 interrupt-controller;
58 #interrupt-cells = <3>;
59 reg = <0x48211000 0x1000>,
60 <0x48212000 0x1000>,
61 <0x48214000 0x2000>,
62 <0x48216000 0x2000>;
63 };
64
65 /*
66 * The soc node represents the soc top level view. It is uses for IPs
67 * that are not memory mapped in the MPU view or for the MPU itself.
68 */
69 soc {
70 compatible = "ti,omap-infra";
71 mpu {
72 compatible = "ti,omap5-mpu";
73 ti,hwmods = "mpu";
74 };
75 };
76
77 /*
78 * XXX: Use a flat representation of the OMAP3 interconnect.
79 * The real OMAP interconnect network is quite complex.
80 * Since that will not bring real advantage to represent that in DT for
81 * the moment, just use a fake OCP bus entry to represent the whole bus
82 * hierarchy.
83 */
84 ocp {
85 compatible = "ti,omap4-l3-noc", "simple-bus";
86 #address-cells = <1>;
87 #size-cells = <1>;
88 ranges;
89 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
90 reg = <0x44000000 0x2000>,
91 <0x44800000 0x3000>,
92 <0x45000000 0x4000>;
93 interrupts = <0 9 0x4>,
94 <0 10 0x4>;
95
96 counter32k: counter@4ae04000 {
97 compatible = "ti,omap-counter32k";
98 reg = <0x4ae04000 0x40>;
99 ti,hwmods = "counter_32k";
100 };
101
102 omap5_pmx_core: pinmux@4a002840 {
103 compatible = "ti,omap4-padconf", "pinctrl-single";
104 reg = <0x4a002840 0x01b6>;
105 #address-cells = <1>;
106 #size-cells = <0>;
107 pinctrl-single,register-width = <16>;
108 pinctrl-single,function-mask = <0x7fff>;
109 };
110 omap5_pmx_wkup: pinmux@4ae0c840 {
111 compatible = "ti,omap4-padconf", "pinctrl-single";
112 reg = <0x4ae0c840 0x0038>;
113 #address-cells = <1>;
114 #size-cells = <0>;
115 pinctrl-single,register-width = <16>;
116 pinctrl-single,function-mask = <0x7fff>;
117 };
118
119 sdma: dma-controller@4a056000 {
120 compatible = "ti,omap4430-sdma";
121 reg = <0x4a056000 0x1000>;
122 interrupts = <0 12 0x4>,
123 <0 13 0x4>,
124 <0 14 0x4>,
125 <0 15 0x4>;
126 #dma-cells = <1>;
127 #dma-channels = <32>;
128 #dma-requests = <127>;
129 };
130
131 gpio1: gpio@4ae10000 {
132 compatible = "ti,omap4-gpio";
133 reg = <0x4ae10000 0x200>;
134 interrupts = <0 29 0x4>;
135 ti,hwmods = "gpio1";
136 ti,gpio-always-on;
137 gpio-controller;
138 #gpio-cells = <2>;
139 interrupt-controller;
140 #interrupt-cells = <2>;
141 };
142
143 gpio2: gpio@48055000 {
144 compatible = "ti,omap4-gpio";
145 reg = <0x48055000 0x200>;
146 interrupts = <0 30 0x4>;
147 ti,hwmods = "gpio2";
148 gpio-controller;
149 #gpio-cells = <2>;
150 interrupt-controller;
151 #interrupt-cells = <2>;
152 };
153
154 gpio3: gpio@48057000 {
155 compatible = "ti,omap4-gpio";
156 reg = <0x48057000 0x200>;
157 interrupts = <0 31 0x4>;
158 ti,hwmods = "gpio3";
159 gpio-controller;
160 #gpio-cells = <2>;
161 interrupt-controller;
162 #interrupt-cells = <2>;
163 };
164
165 gpio4: gpio@48059000 {
166 compatible = "ti,omap4-gpio";
167 reg = <0x48059000 0x200>;
168 interrupts = <0 32 0x4>;
169 ti,hwmods = "gpio4";
170 gpio-controller;
171 #gpio-cells = <2>;
172 interrupt-controller;
173 #interrupt-cells = <2>;
174 };
175
176 gpio5: gpio@4805b000 {
177 compatible = "ti,omap4-gpio";
178 reg = <0x4805b000 0x200>;
179 interrupts = <0 33 0x4>;
180 ti,hwmods = "gpio5";
181 gpio-controller;
182 #gpio-cells = <2>;
183 interrupt-controller;
184 #interrupt-cells = <2>;
185 };
186
187 gpio6: gpio@4805d000 {
188 compatible = "ti,omap4-gpio";
189 reg = <0x4805d000 0x200>;
190 interrupts = <0 34 0x4>;
191 ti,hwmods = "gpio6";
192 gpio-controller;
193 #gpio-cells = <2>;
194 interrupt-controller;
195 #interrupt-cells = <2>;
196 };
197
198 gpio7: gpio@48051000 {
199 compatible = "ti,omap4-gpio";
200 reg = <0x48051000 0x200>;
201 interrupts = <0 35 0x4>;
202 ti,hwmods = "gpio7";
203 gpio-controller;
204 #gpio-cells = <2>;
205 interrupt-controller;
206 #interrupt-cells = <2>;
207 };
208
209 gpio8: gpio@48053000 {
210 compatible = "ti,omap4-gpio";
211 reg = <0x48053000 0x200>;
212 interrupts = <0 121 0x4>;
213 ti,hwmods = "gpio8";
214 gpio-controller;
215 #gpio-cells = <2>;
216 interrupt-controller;
217 #interrupt-cells = <2>;
218 };
219
220 gpmc: gpmc@50000000 {
221 compatible = "ti,omap4430-gpmc";
222 reg = <0x50000000 0x1000>;
223 #address-cells = <2>;
224 #size-cells = <1>;
225 interrupts = <0 20 0x4>;
226 gpmc,num-cs = <8>;
227 gpmc,num-waitpins = <4>;
228 ti,hwmods = "gpmc";
229 };
230
231 i2c1: i2c@48070000 {
232 compatible = "ti,omap4-i2c";
233 reg = <0x48070000 0x100>;
234 interrupts = <0 56 0x4>;
235 #address-cells = <1>;
236 #size-cells = <0>;
237 ti,hwmods = "i2c1";
238 };
239
240 i2c2: i2c@48072000 {
241 compatible = "ti,omap4-i2c";
242 reg = <0x48072000 0x100>;
243 interrupts = <0 57 0x4>;
244 #address-cells = <1>;
245 #size-cells = <0>;
246 ti,hwmods = "i2c2";
247 };
248
249 i2c3: i2c@48060000 {
250 compatible = "ti,omap4-i2c";
251 reg = <0x48060000 0x100>;
252 interrupts = <0 61 0x4>;
253 #address-cells = <1>;
254 #size-cells = <0>;
255 ti,hwmods = "i2c3";
256 };
257
258 i2c4: i2c@4807a000 {
259 compatible = "ti,omap4-i2c";
260 reg = <0x4807a000 0x100>;
261 interrupts = <0 62 0x4>;
262 #address-cells = <1>;
263 #size-cells = <0>;
264 ti,hwmods = "i2c4";
265 };
266
267 i2c5: i2c@4807c000 {
268 compatible = "ti,omap4-i2c";
269 reg = <0x4807c000 0x100>;
270 interrupts = <0 60 0x4>;
271 #address-cells = <1>;
272 #size-cells = <0>;
273 ti,hwmods = "i2c5";
274 };
275
276 mcspi1: spi@48098000 {
277 compatible = "ti,omap4-mcspi";
278 reg = <0x48098000 0x200>;
279 interrupts = <0 65 0x4>;
280 #address-cells = <1>;
281 #size-cells = <0>;
282 ti,hwmods = "mcspi1";
283 ti,spi-num-cs = <4>;
284 dmas = <&sdma 35>,
285 <&sdma 36>,
286 <&sdma 37>,
287 <&sdma 38>,
288 <&sdma 39>,
289 <&sdma 40>,
290 <&sdma 41>,
291 <&sdma 42>;
292 dma-names = "tx0", "rx0", "tx1", "rx1",
293 "tx2", "rx2", "tx3", "rx3";
294 };
295
296 mcspi2: spi@4809a000 {
297 compatible = "ti,omap4-mcspi";
298 reg = <0x4809a000 0x200>;
299 interrupts = <0 66 0x4>;
300 #address-cells = <1>;
301 #size-cells = <0>;
302 ti,hwmods = "mcspi2";
303 ti,spi-num-cs = <2>;
304 dmas = <&sdma 43>,
305 <&sdma 44>,
306 <&sdma 45>,
307 <&sdma 46>;
308 dma-names = "tx0", "rx0", "tx1", "rx1";
309 };
310
311 mcspi3: spi@480b8000 {
312 compatible = "ti,omap4-mcspi";
313 reg = <0x480b8000 0x200>;
314 interrupts = <0 91 0x4>;
315 #address-cells = <1>;
316 #size-cells = <0>;
317 ti,hwmods = "mcspi3";
318 ti,spi-num-cs = <2>;
319 dmas = <&sdma 15>, <&sdma 16>;
320 dma-names = "tx0", "rx0";
321 };
322
323 mcspi4: spi@480ba000 {
324 compatible = "ti,omap4-mcspi";
325 reg = <0x480ba000 0x200>;
326 interrupts = <0 48 0x4>;
327 #address-cells = <1>;
328 #size-cells = <0>;
329 ti,hwmods = "mcspi4";
330 ti,spi-num-cs = <1>;
331 dmas = <&sdma 70>, <&sdma 71>;
332 dma-names = "tx0", "rx0";
333 };
334
335 uart1: serial@4806a000 {
336 compatible = "ti,omap4-uart";
337 reg = <0x4806a000 0x100>;
338 interrupts = <0 72 0x4>;
339 ti,hwmods = "uart1";
340 clock-frequency = <48000000>;
341 };
342
343 uart2: serial@4806c000 {
344 compatible = "ti,omap4-uart";
345 reg = <0x4806c000 0x100>;
346 interrupts = <0 73 0x4>;
347 ti,hwmods = "uart2";
348 clock-frequency = <48000000>;
349 };
350
351 uart3: serial@48020000 {
352 compatible = "ti,omap4-uart";
353 reg = <0x48020000 0x100>;
354 interrupts = <0 74 0x4>;
355 ti,hwmods = "uart3";
356 clock-frequency = <48000000>;
357 };
358
359 uart4: serial@4806e000 {
360 compatible = "ti,omap4-uart";
361 reg = <0x4806e000 0x100>;
362 interrupts = <0 70 0x4>;
363 ti,hwmods = "uart4";
364 clock-frequency = <48000000>;
365 };
366
367 uart5: serial@48066000 {
368 compatible = "ti,omap4-uart";
369 reg = <0x48066000 0x100>;
370 interrupts = <0 105 0x4>;
371 ti,hwmods = "uart5";
372 clock-frequency = <48000000>;
373 };
374
375 uart6: serial@48068000 {
376 compatible = "ti,omap4-uart";
377 reg = <0x48068000 0x100>;
378 interrupts = <0 106 0x4>;
379 ti,hwmods = "uart6";
380 clock-frequency = <48000000>;
381 };
382
383 mmc1: mmc@4809c000 {
384 compatible = "ti,omap4-hsmmc";
385 reg = <0x4809c000 0x400>;
386 interrupts = <0 83 0x4>;
387 ti,hwmods = "mmc1";
388 ti,dual-volt;
389 ti,needs-special-reset;
390 dmas = <&sdma 61>, <&sdma 62>;
391 dma-names = "tx", "rx";
392 };
393
394 mmc2: mmc@480b4000 {
395 compatible = "ti,omap4-hsmmc";
396 reg = <0x480b4000 0x400>;
397 interrupts = <0 86 0x4>;
398 ti,hwmods = "mmc2";
399 ti,needs-special-reset;
400 dmas = <&sdma 47>, <&sdma 48>;
401 dma-names = "tx", "rx";
402 };
403
404 mmc3: mmc@480ad000 {
405 compatible = "ti,omap4-hsmmc";
406 reg = <0x480ad000 0x400>;
407 interrupts = <0 94 0x4>;
408 ti,hwmods = "mmc3";
409 ti,needs-special-reset;
410 dmas = <&sdma 77>, <&sdma 78>;
411 dma-names = "tx", "rx";
412 };
413
414 mmc4: mmc@480d1000 {
415 compatible = "ti,omap4-hsmmc";
416 reg = <0x480d1000 0x400>;
417 interrupts = <0 96 0x4>;
418 ti,hwmods = "mmc4";
419 ti,needs-special-reset;
420 dmas = <&sdma 57>, <&sdma 58>;
421 dma-names = "tx", "rx";
422 };
423
424 mmc5: mmc@480d5000 {
425 compatible = "ti,omap4-hsmmc";
426 reg = <0x480d5000 0x400>;
427 interrupts = <0 59 0x4>;
428 ti,hwmods = "mmc5";
429 ti,needs-special-reset;
430 dmas = <&sdma 59>, <&sdma 60>;
431 dma-names = "tx", "rx";
432 };
433
434 keypad: keypad@4ae1c000 {
435 compatible = "ti,omap4-keypad";
436 reg = <0x4ae1c000 0x400>;
437 ti,hwmods = "kbd";
438 };
439
440 mcpdm: mcpdm@40132000 {
441 compatible = "ti,omap4-mcpdm";
442 reg = <0x40132000 0x7f>, /* MPU private access */
443 <0x49032000 0x7f>; /* L3 Interconnect */
444 reg-names = "mpu", "dma";
445 interrupts = <0 112 0x4>;
446 ti,hwmods = "mcpdm";
447 dmas = <&sdma 65>,
448 <&sdma 66>;
449 dma-names = "up_link", "dn_link";
450 };
451
452 dmic: dmic@4012e000 {
453 compatible = "ti,omap4-dmic";
454 reg = <0x4012e000 0x7f>, /* MPU private access */
455 <0x4902e000 0x7f>; /* L3 Interconnect */
456 reg-names = "mpu", "dma";
457 interrupts = <0 114 0x4>;
458 ti,hwmods = "dmic";
459 dmas = <&sdma 67>;
460 dma-names = "up_link";
461 };
462
463 mcbsp1: mcbsp@40122000 {
464 compatible = "ti,omap4-mcbsp";
465 reg = <0x40122000 0xff>, /* MPU private access */
466 <0x49022000 0xff>; /* L3 Interconnect */
467 reg-names = "mpu", "dma";
468 interrupts = <0 17 0x4>;
469 interrupt-names = "common";
470 ti,buffer-size = <128>;
471 ti,hwmods = "mcbsp1";
472 dmas = <&sdma 33>,
473 <&sdma 34>;
474 dma-names = "tx", "rx";
475 };
476
477 mcbsp2: mcbsp@40124000 {
478 compatible = "ti,omap4-mcbsp";
479 reg = <0x40124000 0xff>, /* MPU private access */
480 <0x49024000 0xff>; /* L3 Interconnect */
481 reg-names = "mpu", "dma";
482 interrupts = <0 22 0x4>;
483 interrupt-names = "common";
484 ti,buffer-size = <128>;
485 ti,hwmods = "mcbsp2";
486 dmas = <&sdma 17>,
487 <&sdma 18>;
488 dma-names = "tx", "rx";
489 };
490
491 mcbsp3: mcbsp@40126000 {
492 compatible = "ti,omap4-mcbsp";
493 reg = <0x40126000 0xff>, /* MPU private access */
494 <0x49026000 0xff>; /* L3 Interconnect */
495 reg-names = "mpu", "dma";
496 interrupts = <0 23 0x4>;
497 interrupt-names = "common";
498 ti,buffer-size = <128>;
499 ti,hwmods = "mcbsp3";
500 dmas = <&sdma 19>,
501 <&sdma 20>;
502 dma-names = "tx", "rx";
503 };
504
505 timer1: timer@4ae18000 {
506 compatible = "ti,omap5430-timer";
507 reg = <0x4ae18000 0x80>;
508 interrupts = <0 37 0x4>;
509 ti,hwmods = "timer1";
510 ti,timer-alwon;
511 };
512
513 timer2: timer@48032000 {
514 compatible = "ti,omap5430-timer";
515 reg = <0x48032000 0x80>;
516 interrupts = <0 38 0x4>;
517 ti,hwmods = "timer2";
518 };
519
520 timer3: timer@48034000 {
521 compatible = "ti,omap5430-timer";
522 reg = <0x48034000 0x80>;
523 interrupts = <0 39 0x4>;
524 ti,hwmods = "timer3";
525 };
526
527 timer4: timer@48036000 {
528 compatible = "ti,omap5430-timer";
529 reg = <0x48036000 0x80>;
530 interrupts = <0 40 0x4>;
531 ti,hwmods = "timer4";
532 };
533
534 timer5: timer@40138000 {
535 compatible = "ti,omap5430-timer";
536 reg = <0x40138000 0x80>,
537 <0x49038000 0x80>;
538 interrupts = <0 41 0x4>;
539 ti,hwmods = "timer5";
540 ti,timer-dsp;
541 };
542
543 timer6: timer@4013a000 {
544 compatible = "ti,omap5430-timer";
545 reg = <0x4013a000 0x80>,
546 <0x4903a000 0x80>;
547 interrupts = <0 42 0x4>;
548 ti,hwmods = "timer6";
549 ti,timer-dsp;
550 ti,timer-pwm;
551 };
552
553 timer7: timer@4013c000 {
554 compatible = "ti,omap5430-timer";
555 reg = <0x4013c000 0x80>,
556 <0x4903c000 0x80>;
557 interrupts = <0 43 0x4>;
558 ti,hwmods = "timer7";
559 ti,timer-dsp;
560 };
561
562 timer8: timer@4013e000 {
563 compatible = "ti,omap5430-timer";
564 reg = <0x4013e000 0x80>,
565 <0x4903e000 0x80>;
566 interrupts = <0 44 0x4>;
567 ti,hwmods = "timer8";
568 ti,timer-dsp;
569 ti,timer-pwm;
570 };
571
572 timer9: timer@4803e000 {
573 compatible = "ti,omap5430-timer";
574 reg = <0x4803e000 0x80>;
575 interrupts = <0 45 0x4>;
576 ti,hwmods = "timer9";
577 };
578
579 timer10: timer@48086000 {
580 compatible = "ti,omap5430-timer";
581 reg = <0x48086000 0x80>;
582 interrupts = <0 46 0x4>;
583 ti,hwmods = "timer10";
584 };
585
586 timer11: timer@48088000 {
587 compatible = "ti,omap5430-timer";
588 reg = <0x48088000 0x80>;
589 interrupts = <0 47 0x4>;
590 ti,hwmods = "timer11";
591 ti,timer-pwm;
592 };
593
594 wdt2: wdt@4ae14000 {
595 compatible = "ti,omap5-wdt", "ti,omap3-wdt";
596 reg = <0x4ae14000 0x80>;
597 interrupts = <0 80 0x4>;
598 ti,hwmods = "wd_timer2";
599 };
600
601 emif1: emif@0x4c000000 {
602 compatible = "ti,emif-4d5";
603 ti,hwmods = "emif1";
604 phy-type = <2>; /* DDR PHY type: Intelli PHY */
605 reg = <0x4c000000 0x400>;
606 interrupts = <0 110 0x4>;
607 hw-caps-read-idle-ctrl;
608 hw-caps-ll-interface;
609 hw-caps-temp-alert;
610 };
611
612 emif2: emif@0x4d000000 {
613 compatible = "ti,emif-4d5";
614 ti,hwmods = "emif2";
615 phy-type = <2>; /* DDR PHY type: Intelli PHY */
616 reg = <0x4d000000 0x400>;
617 interrupts = <0 111 0x4>;
618 hw-caps-read-idle-ctrl;
619 hw-caps-ll-interface;
620 hw-caps-temp-alert;
621 };
622
623 omap_control_usb: omap-control-usb@4a002300 {
624 compatible = "ti,omap-control-usb";
625 reg = <0x4a002300 0x4>,
626 <0x4a002370 0x4>;
627 reg-names = "control_dev_conf", "phy_power_usb";
628 ti,type = <2>;
629 };
630
631 omap_dwc3@4a020000 {
632 compatible = "ti,dwc3";
633 ti,hwmods = "usb_otg_ss";
634 reg = <0x4a020000 0x1000>;
635 interrupts = <0 93 4>;
636 #address-cells = <1>;
637 #size-cells = <1>;
638 utmi-mode = <2>;
639 ranges;
640 dwc3@4a030000 {
641 compatible = "synopsys,dwc3";
642 reg = <0x4a030000 0x1000>;
643 interrupts = <0 92 4>;
644 usb-phy = <&usb2_phy>, <&usb3_phy>;
645 tx-fifo-resize;
646 };
647 };
648
649 ocp2scp {
650 compatible = "ti,omap-ocp2scp";
651 #address-cells = <1>;
652 #size-cells = <1>;
653 ranges;
654 ti,hwmods = "ocp2scp1";
655 usb2_phy: usb2phy@4a084000 {
656 compatible = "ti,omap-usb2";
657 reg = <0x4a084000 0x7c>;
658 ctrl-module = <&omap_control_usb>;
659 };
660
661 usb3_phy: usb3phy@4a084400 {
662 compatible = "ti,omap-usb3";
663 reg = <0x4a084400 0x80>,
664 <0x4a084800 0x64>,
665 <0x4a084c00 0x40>;
666 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
667 ctrl-module = <&omap_control_usb>;
668 };
669 };
670 };
671};