Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1#ifndef LINUX_BCMA_DRIVER_CC_H_
2#define LINUX_BCMA_DRIVER_CC_H_
3
4/** ChipCommon core registers. **/
5#define BCMA_CC_ID 0x0000
6#define BCMA_CC_ID_ID 0x0000FFFF
7#define BCMA_CC_ID_ID_SHIFT 0
8#define BCMA_CC_ID_REV 0x000F0000
9#define BCMA_CC_ID_REV_SHIFT 16
10#define BCMA_CC_ID_PKG 0x00F00000
11#define BCMA_CC_ID_PKG_SHIFT 20
12#define BCMA_CC_ID_NRCORES 0x0F000000
13#define BCMA_CC_ID_NRCORES_SHIFT 24
14#define BCMA_CC_ID_TYPE 0xF0000000
15#define BCMA_CC_ID_TYPE_SHIFT 28
16#define BCMA_CC_CAP 0x0004 /* Capabilities */
17#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */
18#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
19#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */
20#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
21#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
22#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */
23#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */
24#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
25#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
26#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
27#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
28#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
29#define BCMA_PLLTYPE_NONE 0x00000000
30#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
31#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
32#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
33#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
34#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
35#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
36#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
37#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */
38#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */
39#define BCMA_CC_CAP_OTPS_SHIFT 19
40#define BCMA_CC_CAP_OTPS_BASE 5
41#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */
42#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */
43#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */
44#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
45#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
46#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
47#define BCMA_CC_CORECTL 0x0008
48#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
49#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
50#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
51#define BCMA_CC_BIST 0x000C
52#define BCMA_CC_OTPS 0x0010 /* OTP status */
53#define BCMA_CC_OTPS_PROGFAIL 0x80000000
54#define BCMA_CC_OTPS_PROTECT 0x00000007
55#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
56#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
57#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
58#define BCMA_CC_OTPC 0x0014 /* OTP control */
59#define BCMA_CC_OTPC_RECWAIT 0xFF000000
60#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
61#define BCMA_CC_OTPC_PRW_SHIFT 8
62#define BCMA_CC_OTPC_MAXFAIL 0x00000038
63#define BCMA_CC_OTPC_VSEL 0x00000006
64#define BCMA_CC_OTPC_SELVL 0x00000001
65#define BCMA_CC_OTPP 0x0018 /* OTP prog */
66#define BCMA_CC_OTPP_COL 0x000000FF
67#define BCMA_CC_OTPP_ROW 0x0000FF00
68#define BCMA_CC_OTPP_ROW_SHIFT 8
69#define BCMA_CC_OTPP_READERR 0x10000000
70#define BCMA_CC_OTPP_VALUE 0x20000000
71#define BCMA_CC_OTPP_READ 0x40000000
72#define BCMA_CC_OTPP_START 0x80000000
73#define BCMA_CC_OTPP_BUSY 0x80000000
74#define BCMA_CC_IRQSTAT 0x0020
75#define BCMA_CC_IRQMASK 0x0024
76#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
77#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
78#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
79#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
80#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
81#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
82#define BCMA_CC_JCMD_START 0x80000000
83#define BCMA_CC_JCMD_BUSY 0x80000000
84#define BCMA_CC_JCMD_PAUSE 0x40000000
85#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000
86#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000
87#define BCMA_CC_JCMD0_ACC_DR 0x00001000
88#define BCMA_CC_JCMD0_ACC_IR 0x00002000
89#define BCMA_CC_JCMD0_ACC_RESET 0x00003000
90#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000
91#define BCMA_CC_JCMD0_ACC_PDR 0x00005000
92#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00
93#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
94#define BCMA_CC_JCMD_ACC_IRDR 0x00000000
95#define BCMA_CC_JCMD_ACC_DR 0x00010000
96#define BCMA_CC_JCMD_ACC_IR 0x00020000
97#define BCMA_CC_JCMD_ACC_RESET 0x00030000
98#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000
99#define BCMA_CC_JCMD_ACC_PDR 0x00050000
100#define BCMA_CC_JCMD_IRW_MASK 0x00001F00
101#define BCMA_CC_JCMD_IRW_SHIFT 8
102#define BCMA_CC_JCMD_DRW_MASK 0x0000003F
103#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */
104#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */
105#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */
106#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */
107#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
108#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
109#define BCMA_CC_FLASHCTL 0x0040
110#define BCMA_CC_FLASHCTL_START 0x80000000
111#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
112#define BCMA_CC_FLASHADDR 0x0044
113#define BCMA_CC_FLASHDATA 0x0048
114#define BCMA_CC_BCAST_ADDR 0x0050
115#define BCMA_CC_BCAST_DATA 0x0054
116#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */
117#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */
118#define BCMA_CC_GPIOIN 0x0060
119#define BCMA_CC_GPIOOUT 0x0064
120#define BCMA_CC_GPIOOUTEN 0x0068
121#define BCMA_CC_GPIOCTL 0x006C
122#define BCMA_CC_GPIOPOL 0x0070
123#define BCMA_CC_GPIOIRQ 0x0074
124#define BCMA_CC_WATCHDOG 0x0080
125#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
126#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF
127#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0
128#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000
129#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16
130#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
131#define BCMA_CC_CLOCK_N 0x0090
132#define BCMA_CC_CLOCK_SB 0x0094
133#define BCMA_CC_CLOCK_PCI 0x0098
134#define BCMA_CC_CLOCK_M2 0x009C
135#define BCMA_CC_CLOCK_MIPS 0x00A0
136#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */
137#define BCMA_CC_CLKDIV_SFLASH 0x0F000000
138#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24
139#define BCMA_CC_CLKDIV_OTP 0x000F0000
140#define BCMA_CC_CLKDIV_OTP_SHIFT 16
141#define BCMA_CC_CLKDIV_JTAG 0x00000F00
142#define BCMA_CC_CLKDIV_JTAG_SHIFT 8
143#define BCMA_CC_CLKDIV_UART 0x000000FF
144#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
145#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
146#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
147#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
148#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
149#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
150#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
151#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
152#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
153#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
154#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
155#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
156#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
157#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
158#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
159#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16
160#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
161#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
162#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
163#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
164#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
165#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
166#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
167#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16
168#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */
169#define BCMA_CC_EROM 0x00FC
170#define BCMA_CC_PCMCIA_CFG 0x0100
171#define BCMA_CC_PCMCIA_MEMWAIT 0x0104
172#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108
173#define BCMA_CC_PCMCIA_IOWAIT 0x010C
174#define BCMA_CC_IDE_CFG 0x0110
175#define BCMA_CC_IDE_MEMWAIT 0x0114
176#define BCMA_CC_IDE_ATTRWAIT 0x0118
177#define BCMA_CC_IDE_IOWAIT 0x011C
178#define BCMA_CC_PROG_CFG 0x0120
179#define BCMA_CC_PROG_WAITCNT 0x0124
180#define BCMA_CC_FLASH_CFG 0x0128
181#define BCMA_CC_FLASH_WAITCNT 0x012C
182/* 0x1E0 is defined as shared BCMA_CLKCTLST */
183#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
184#define BCMA_CC_UART0_DATA 0x0300
185#define BCMA_CC_UART0_IMR 0x0304
186#define BCMA_CC_UART0_FCR 0x0308
187#define BCMA_CC_UART0_LCR 0x030C
188#define BCMA_CC_UART0_MCR 0x0310
189#define BCMA_CC_UART0_LSR 0x0314
190#define BCMA_CC_UART0_MSR 0x0318
191#define BCMA_CC_UART0_SCRATCH 0x031C
192#define BCMA_CC_UART1_DATA 0x0400
193#define BCMA_CC_UART1_IMR 0x0404
194#define BCMA_CC_UART1_FCR 0x0408
195#define BCMA_CC_UART1_LCR 0x040C
196#define BCMA_CC_UART1_MCR 0x0410
197#define BCMA_CC_UART1_LSR 0x0414
198#define BCMA_CC_UART1_MSR 0x0418
199#define BCMA_CC_UART1_SCRATCH 0x041C
200/* PMU registers (rev >= 20) */
201#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
202#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
203#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
204#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
205#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
206#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
207#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
208#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2
209#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
210#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
211#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
212#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
213#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
214#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
215#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
216#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
217#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */
218#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */
219#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */
220#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */
221#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */
222#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
223#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
224#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
225#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
226#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
227#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */
228#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
229#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */
230#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
231#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
232#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
233#define BCMA_CC_CHIPCTL_ADDR 0x0650
234#define BCMA_CC_CHIPCTL_DATA 0x0654
235#define BCMA_CC_REGCTL_ADDR 0x0658
236#define BCMA_CC_REGCTL_DATA 0x065C
237#define BCMA_CC_PLLCTL_ADDR 0x0660
238#define BCMA_CC_PLLCTL_DATA 0x0664
239#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */
240#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */
241
242/* Data for the PMU, if available.
243 * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
244 */
245struct bcma_chipcommon_pmu {
246 u8 rev; /* PMU revision */
247 u32 crystalfreq; /* The active crystal frequency (in kHz) */
248};
249
250struct bcma_drv_cc {
251 struct bcma_device *core;
252 u32 status;
253 u32 capabilities;
254 u32 capabilities_ext;
255 /* Fast Powerup Delay constant */
256 u16 fast_pwrup_delay;
257 struct bcma_chipcommon_pmu pmu;
258};
259
260/* Register access */
261#define bcma_cc_read32(cc, offset) \
262 bcma_read32((cc)->core, offset)
263#define bcma_cc_write32(cc, offset, val) \
264 bcma_write32((cc)->core, offset, val)
265
266#define bcma_cc_mask32(cc, offset, mask) \
267 bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
268#define bcma_cc_set32(cc, offset, set) \
269 bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
270#define bcma_cc_maskset32(cc, offset, mask, set) \
271 bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
272
273extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
274
275extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
276extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
277
278extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
279 u32 ticks);
280
281void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
282
283u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
284
285/* Chipcommon GPIO pin access. */
286u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
287u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
288u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
289u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
290u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
291u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
292
293/* PMU support */
294extern void bcma_pmu_init(struct bcma_drv_cc *cc);
295
296#endif /* LINUX_BCMA_DRIVER_CC_H_ */