tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1menuconfig RC_CORE
2 tristate "Remote Controller adapters"
3 depends on INPUT
4 default INPUT
5 ---help---
6 Enable support for Remote Controllers on Linux. This is
7 needed in order to support several video capture adapters.
8 Currently, all supported devices use InfraRed.
9
10 Enable this option if you have a video capture board even
11 if you don't need IR, as otherwise, you may not be able to
12 compile the driver for your adapter.
13
14if RC_CORE
15
16config LIRC
17 tristate
18 default y
19
20 ---help---
21 Enable this option to build the Linux Infrared Remote
22 Control (LIRC) core device interface driver. The LIRC
23 interface passes raw IR to and from userspace, where the
24 LIRC daemon handles protocol decoding for IR reception and
25 encoding for IR transmitting (aka "blasting").
26
27source "drivers/media/rc/keymaps/Kconfig"
28
29config IR_NEC_DECODER
30 tristate "Enable IR raw decoder for the NEC protocol"
31 depends on RC_CORE
32 select BITREVERSE
33 default y
34
35 ---help---
36 Enable this option if you have IR with NEC protocol, and
37 if the IR is decoded in software
38
39config IR_RC5_DECODER
40 tristate "Enable IR raw decoder for the RC-5 protocol"
41 depends on RC_CORE
42 select BITREVERSE
43 default y
44
45 ---help---
46 Enable this option if you have IR with RC-5 protocol, and
47 if the IR is decoded in software
48
49config IR_RC6_DECODER
50 tristate "Enable IR raw decoder for the RC6 protocol"
51 depends on RC_CORE
52 select BITREVERSE
53 default y
54
55 ---help---
56 Enable this option if you have an infrared remote control which
57 uses the RC6 protocol, and you need software decoding support.
58
59config IR_JVC_DECODER
60 tristate "Enable IR raw decoder for the JVC protocol"
61 depends on RC_CORE
62 select BITREVERSE
63 default y
64
65 ---help---
66 Enable this option if you have an infrared remote control which
67 uses the JVC protocol, and you need software decoding support.
68
69config IR_SONY_DECODER
70 tristate "Enable IR raw decoder for the Sony protocol"
71 depends on RC_CORE
72 default y
73
74 ---help---
75 Enable this option if you have an infrared remote control which
76 uses the Sony protocol, and you need software decoding support.
77
78config IR_RC5_SZ_DECODER
79 tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
80 depends on RC_CORE
81 select BITREVERSE
82 default y
83
84 ---help---
85 Enable this option if you have IR with RC-5 (streamzap) protocol,
86 and if the IR is decoded in software. (The Streamzap PC Remote
87 uses an IR protocol that is almost standard RC-5, but not quite,
88 as it uses an additional bit).
89
90config IR_MCE_KBD_DECODER
91 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
92 depends on RC_CORE
93 select BITREVERSE
94 default y
95
96 ---help---
97 Enable this option if you have a Microsoft Remote Keyboard for
98 Windows Media Center Edition, which you would like to use with
99 a raw IR receiver in your system.
100
101config IR_LIRC_CODEC
102 tristate "Enable IR to LIRC bridge"
103 depends on RC_CORE
104 depends on LIRC
105 default y
106
107 ---help---
108 Enable this option to pass raw IR to and from userspace via
109 the LIRC interface.
110
111config IR_ENE
112 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
113 depends on PNP
114 depends on RC_CORE
115 ---help---
116 Say Y here to enable support for integrated infrared receiver
117 /transceiver made by ENE.
118
119 You can see if you have it by looking at lspnp output.
120 Output should include ENE0100 ENE0200 or something similar.
121
122 To compile this driver as a module, choose M here: the
123 module will be called ene_ir.
124
125config IR_IMON
126 tristate "SoundGraph iMON Receiver and Display"
127 depends on USB_ARCH_HAS_HCD
128 depends on RC_CORE
129 select USB
130 ---help---
131 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
132 IR Receiver and/or LCD/VFD/VGA display.
133
134 To compile this driver as a module, choose M here: the
135 module will be called imon.
136
137config IR_MCEUSB
138 tristate "Windows Media Center Ed. eHome Infrared Transceiver"
139 depends on USB_ARCH_HAS_HCD
140 depends on RC_CORE
141 select USB
142 ---help---
143 Say Y here if you want to use a Windows Media Center Edition
144 eHome Infrared Transceiver.
145
146 To compile this driver as a module, choose M here: the
147 module will be called mceusb.
148
149config IR_ITE_CIR
150 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
151 depends on PNP
152 depends on RC_CORE
153 ---help---
154 Say Y here to enable support for integrated infrared receivers
155 /transceivers made by ITE Tech Inc. These are found in
156 several ASUS devices, like the ASUS Digimatrix or the ASUS
157 EEEBox 1501U.
158
159 To compile this driver as a module, choose M here: the
160 module will be called ite-cir.
161
162config IR_FINTEK
163 tristate "Fintek Consumer Infrared Transceiver"
164 depends on PNP
165 depends on RC_CORE
166 ---help---
167 Say Y here to enable support for integrated infrared receiver
168 /transciever made by Fintek. This chip is found on assorted
169 Jetway motherboards (and of course, possibly others).
170
171 To compile this driver as a module, choose M here: the
172 module will be called fintek-cir.
173
174config IR_NUVOTON
175 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
176 depends on PNP
177 depends on RC_CORE
178 ---help---
179 Say Y here to enable support for integrated infrared receiver
180 /transciever made by Nuvoton (formerly Winbond). This chip is
181 found in the ASRock ION 330HT, as well as assorted Intel
182 DP55-series motherboards (and of course, possibly others).
183
184 To compile this driver as a module, choose M here: the
185 module will be called nuvoton-cir.
186
187config IR_REDRAT3
188 tristate "RedRat3 IR Transceiver"
189 depends on USB_ARCH_HAS_HCD
190 depends on RC_CORE
191 select USB
192 ---help---
193 Say Y here if you want to use a RedRat3 Infrared Transceiver.
194
195 To compile this driver as a module, choose M here: the
196 module will be called redrat3.
197
198config IR_STREAMZAP
199 tristate "Streamzap PC Remote IR Receiver"
200 depends on USB_ARCH_HAS_HCD
201 depends on RC_CORE
202 select USB
203 ---help---
204 Say Y here if you want to use a Streamzap PC Remote
205 Infrared Receiver.
206
207 To compile this driver as a module, choose M here: the
208 module will be called streamzap.
209
210config IR_WINBOND_CIR
211 tristate "Winbond IR remote control"
212 depends on X86 && PNP
213 depends on RC_CORE
214 select NEW_LEDS
215 select LEDS_CLASS
216 select LEDS_TRIGGERS
217 select BITREVERSE
218 ---help---
219 Say Y here if you want to use the IR remote functionality found
220 in some Winbond SuperI/O chips. Currently only the WPCD376I
221 chip is supported (included in some Intel Media series
222 motherboards).
223
224 To compile this driver as a module, choose M here: the module will
225 be called winbond_cir.
226
227config RC_LOOPBACK
228 tristate "Remote Control Loopback Driver"
229 depends on RC_CORE
230 ---help---
231 Say Y here if you want support for the remote control loopback
232 driver which allows TX data to be sent back as RX data.
233 This is mostly useful for debugging purposes.
234
235 If you're not sure, select N here.
236
237 To compile this driver as a module, choose M here: the module will
238 be called rc_loopback.
239
240endif #RC_CORE