Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v3.1-rc4 184 lines 5.5 kB view raw
1/* 2 * Copyright (C) ST-Ericsson SA 2010 3 * 4 * License Terms: GNU General Public License, version 2 5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson 6 */ 7 8#ifndef __STMPE_H 9#define __STMPE_H 10 11#ifdef STMPE_DUMP_BYTES 12static inline void stmpe_dump_bytes(const char *str, const void *buf, 13 size_t len) 14{ 15 print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len); 16} 17#else 18static inline void stmpe_dump_bytes(const char *str, const void *buf, 19 size_t len) 20{ 21} 22#endif 23 24/** 25 * struct stmpe_variant_block - information about block 26 * @cell: base mfd cell 27 * @irq: interrupt number to be added to each IORESOURCE_IRQ 28 * in the cell 29 * @block: block id; used for identification with platform data and for 30 * enable and altfunc callbacks 31 */ 32struct stmpe_variant_block { 33 struct mfd_cell *cell; 34 int irq; 35 enum stmpe_block block; 36}; 37 38/** 39 * struct stmpe_variant_info - variant-specific information 40 * @name: part name 41 * @id_val: content of CHIPID register 42 * @id_mask: bits valid in CHIPID register for comparison with id_val 43 * @num_gpios: number of GPIOS 44 * @af_bits: number of bits used to specify the alternate function 45 * @regs: variant specific registers. 46 * @blocks: list of blocks present on this device 47 * @num_blocks: number of blocks present on this device 48 * @num_irqs: number of internal IRQs available on this device 49 * @enable: callback to enable the specified blocks. 50 * Called with the I/O lock held. 51 * @get_altfunc: callback to get the alternate function number for the 52 * specific block 53 * @enable_autosleep: callback to configure autosleep with specified timeout 54 */ 55struct stmpe_variant_info { 56 const char *name; 57 u16 id_val; 58 u16 id_mask; 59 int num_gpios; 60 int af_bits; 61 const u8 *regs; 62 struct stmpe_variant_block *blocks; 63 int num_blocks; 64 int num_irqs; 65 int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable); 66 int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block); 67 int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout); 68}; 69 70#define STMPE_ICR_LSB_HIGH (1 << 2) 71#define STMPE_ICR_LSB_EDGE (1 << 1) 72#define STMPE_ICR_LSB_GIM (1 << 0) 73 74/* 75 * STMPE811 76 */ 77 78#define STMPE811_IRQ_TOUCH_DET 0 79#define STMPE811_IRQ_FIFO_TH 1 80#define STMPE811_IRQ_FIFO_OFLOW 2 81#define STMPE811_IRQ_FIFO_FULL 3 82#define STMPE811_IRQ_FIFO_EMPTY 4 83#define STMPE811_IRQ_TEMP_SENS 5 84#define STMPE811_IRQ_ADC 6 85#define STMPE811_IRQ_GPIOC 7 86#define STMPE811_NR_INTERNAL_IRQS 8 87 88#define STMPE811_REG_CHIP_ID 0x00 89#define STMPE811_REG_SYS_CTRL2 0x04 90#define STMPE811_REG_INT_CTRL 0x09 91#define STMPE811_REG_INT_EN 0x0A 92#define STMPE811_REG_INT_STA 0x0B 93#define STMPE811_REG_GPIO_INT_EN 0x0C 94#define STMPE811_REG_GPIO_INT_STA 0x0D 95#define STMPE811_REG_GPIO_SET_PIN 0x10 96#define STMPE811_REG_GPIO_CLR_PIN 0x11 97#define STMPE811_REG_GPIO_MP_STA 0x12 98#define STMPE811_REG_GPIO_DIR 0x13 99#define STMPE811_REG_GPIO_ED 0x14 100#define STMPE811_REG_GPIO_RE 0x15 101#define STMPE811_REG_GPIO_FE 0x16 102#define STMPE811_REG_GPIO_AF 0x17 103 104#define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0) 105#define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1) 106#define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2) 107#define STMPE811_SYS_CTRL2_TS_OFF (1 << 3) 108 109/* 110 * STMPE1601 111 */ 112 113#define STMPE1601_IRQ_GPIOC 8 114#define STMPE1601_IRQ_PWM3 7 115#define STMPE1601_IRQ_PWM2 6 116#define STMPE1601_IRQ_PWM1 5 117#define STMPE1601_IRQ_PWM0 4 118#define STMPE1601_IRQ_KEYPAD_OVER 2 119#define STMPE1601_IRQ_KEYPAD 1 120#define STMPE1601_IRQ_WAKEUP 0 121#define STMPE1601_NR_INTERNAL_IRQS 9 122 123#define STMPE1601_REG_SYS_CTRL 0x02 124#define STMPE1601_REG_SYS_CTRL2 0x03 125#define STMPE1601_REG_ICR_LSB 0x11 126#define STMPE1601_REG_IER_LSB 0x13 127#define STMPE1601_REG_ISR_MSB 0x14 128#define STMPE1601_REG_CHIP_ID 0x80 129#define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17 130#define STMPE1601_REG_INT_STA_GPIO_MSB 0x18 131#define STMPE1601_REG_GPIO_MP_LSB 0x87 132#define STMPE1601_REG_GPIO_SET_LSB 0x83 133#define STMPE1601_REG_GPIO_CLR_LSB 0x85 134#define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89 135#define STMPE1601_REG_GPIO_ED_MSB 0x8A 136#define STMPE1601_REG_GPIO_RE_LSB 0x8D 137#define STMPE1601_REG_GPIO_FE_LSB 0x8F 138#define STMPE1601_REG_GPIO_AF_U_MSB 0x92 139 140#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3) 141#define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1) 142#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0) 143 144/* The 1601/2403 share the same masks */ 145#define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7) 146#define STPME1601_AUTOSLEEP_ENABLE (1 << 3) 147 148/* 149 * STMPE24xx 150 */ 151 152#define STMPE24XX_IRQ_GPIOC 8 153#define STMPE24XX_IRQ_PWM2 7 154#define STMPE24XX_IRQ_PWM1 6 155#define STMPE24XX_IRQ_PWM0 5 156#define STMPE24XX_IRQ_ROT_OVER 4 157#define STMPE24XX_IRQ_ROT 3 158#define STMPE24XX_IRQ_KEYPAD_OVER 2 159#define STMPE24XX_IRQ_KEYPAD 1 160#define STMPE24XX_IRQ_WAKEUP 0 161#define STMPE24XX_NR_INTERNAL_IRQS 9 162 163#define STMPE24XX_REG_SYS_CTRL 0x02 164#define STMPE24XX_REG_ICR_LSB 0x11 165#define STMPE24XX_REG_IER_LSB 0x13 166#define STMPE24XX_REG_ISR_MSB 0x14 167#define STMPE24XX_REG_CHIP_ID 0x80 168#define STMPE24XX_REG_IEGPIOR_LSB 0x18 169#define STMPE24XX_REG_ISGPIOR_MSB 0x19 170#define STMPE24XX_REG_GPMR_LSB 0xA5 171#define STMPE24XX_REG_GPSR_LSB 0x85 172#define STMPE24XX_REG_GPCR_LSB 0x88 173#define STMPE24XX_REG_GPDR_LSB 0x8B 174#define STMPE24XX_REG_GPEDR_MSB 0x8C 175#define STMPE24XX_REG_GPRER_LSB 0x91 176#define STMPE24XX_REG_GPFER_LSB 0x94 177#define STMPE24XX_REG_GPAFR_U_MSB 0x9B 178 179#define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3) 180#define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2) 181#define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1) 182#define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0) 183 184#endif