tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * pxa2xx_ssp.h
3 *
4 * Copyright (C) 2003 Russell King, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This driver supports the following PXA CPU/SSP ports:-
11 *
12 * PXA250 SSP
13 * PXA255 SSP, NSSP
14 * PXA26x SSP, NSSP, ASSP
15 * PXA27x SSP1, SSP2, SSP3
16 * PXA3xx SSP1, SSP2, SSP3, SSP4
17 */
18
19#ifndef __LINUX_SSP_H
20#define __LINUX_SSP_H
21
22#include <linux/list.h>
23#include <linux/io.h>
24
25/*
26 * SSP Serial Port Registers
27 * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
28 * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
29 */
30
31#define SSCR0 (0x00) /* SSP Control Register 0 */
32#define SSCR1 (0x04) /* SSP Control Register 1 */
33#define SSSR (0x08) /* SSP Status Register */
34#define SSITR (0x0C) /* SSP Interrupt Test Register */
35#define SSDR (0x10) /* SSP Data Write/Data Read Register */
36
37#define SSTO (0x28) /* SSP Time Out Register */
38#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */
39#define SSTSA (0x30) /* SSP Tx Timeslot Active */
40#define SSRSA (0x34) /* SSP Rx Timeslot Active */
41#define SSTSS (0x38) /* SSP Timeslot Status */
42#define SSACD (0x3C) /* SSP Audio Clock Divider */
43#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */
44
45/* Common PXA2xx bits first */
46#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
47#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
48#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
49#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
50#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
51#define SSCR0_National (0x2 << 4) /* National Microwire */
52#define SSCR0_ECS (1 << 6) /* External clock select */
53#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
54#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */
55
56/* PXA27x, PXA3xx */
57#define SSCR0_EDSS (1 << 20) /* Extended data size select */
58#define SSCR0_NCS (1 << 21) /* Network clock select */
59#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
60#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
61#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
62#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
63#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */
64#define SSCR0_ACS (1 << 30) /* Audio clock select */
65#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */
66
67
68#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
69#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
70#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
71#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
72#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
73#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
74
75#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */
76#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
77#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
78#define SSSR_BSY (1 << 4) /* SSP Busy */
79#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
80#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
81#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
82
83#ifdef CONFIG_ARCH_PXA
84#define RX_THRESH_DFLT 8
85#define TX_THRESH_DFLT 8
86
87#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */
88#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */
89
90#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
91#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
92#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
93#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
94
95#else
96
97#define RX_THRESH_DFLT 2
98#define TX_THRESH_DFLT 2
99
100#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */
101#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */
102
103#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */
104#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
105#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */
106#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
107#endif
108
109/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
110#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
111#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
112#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
113#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
114#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
115#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
116#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
117#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
118#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
119#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
120#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
121#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
122#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
123#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
124#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
125#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
126#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
127#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
128#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
129
130#define SSSR_BCE (1 << 23) /* Bit Count Error */
131#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
132#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
133#define SSSR_EOC (1 << 20) /* End Of Chain */
134#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
135#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
136
137
138#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
139#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
140#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
141#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
142#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
143#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
144#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
145#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
146#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
147
148/* PXA3xx */
149#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */
150#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */
151#define SSPSP_TIMING_MASK (0x7f8001f0)
152
153#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
154#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
155#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
156#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */
157
158enum pxa_ssp_type {
159 SSP_UNDEFINED = 0,
160 PXA25x_SSP, /* pxa 210, 250, 255, 26x */
161 PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
162 PXA27x_SSP,
163 PXA168_SSP,
164 CE4100_SSP,
165};
166
167struct ssp_device {
168 struct platform_device *pdev;
169 struct list_head node;
170
171 struct clk *clk;
172 void __iomem *mmio_base;
173 unsigned long phys_base;
174
175 const char *label;
176 int port_id;
177 int type;
178 int use_count;
179 int irq;
180 int drcmr_rx;
181 int drcmr_tx;
182};
183
184/**
185 * pxa_ssp_write_reg - Write to a SSP register
186 *
187 * @dev: SSP device to access
188 * @reg: Register to write to
189 * @val: Value to be written.
190 */
191static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
192{
193 __raw_writel(val, dev->mmio_base + reg);
194}
195
196/**
197 * pxa_ssp_read_reg - Read from a SSP register
198 *
199 * @dev: SSP device to access
200 * @reg: Register to read from
201 */
202static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
203{
204 return __raw_readl(dev->mmio_base + reg);
205}
206
207struct ssp_device *pxa_ssp_request(int port, const char *label);
208void pxa_ssp_free(struct ssp_device *);
209#endif