at v3.1-rc2 21 kB view raw
1/* interrupt.h */ 2#ifndef _LINUX_INTERRUPT_H 3#define _LINUX_INTERRUPT_H 4 5#include <linux/kernel.h> 6#include <linux/linkage.h> 7#include <linux/bitops.h> 8#include <linux/preempt.h> 9#include <linux/cpumask.h> 10#include <linux/irqreturn.h> 11#include <linux/irqnr.h> 12#include <linux/hardirq.h> 13#include <linux/irqflags.h> 14#include <linux/smp.h> 15#include <linux/percpu.h> 16#include <linux/hrtimer.h> 17#include <linux/kref.h> 18#include <linux/workqueue.h> 19 20#include <linux/atomic.h> 21#include <asm/ptrace.h> 22#include <asm/system.h> 23#include <trace/events/irq.h> 24 25/* 26 * These correspond to the IORESOURCE_IRQ_* defines in 27 * linux/ioport.h to select the interrupt line behaviour. When 28 * requesting an interrupt without specifying a IRQF_TRIGGER, the 29 * setting should be assumed to be "as already configured", which 30 * may be as per machine or firmware initialisation. 31 */ 32#define IRQF_TRIGGER_NONE 0x00000000 33#define IRQF_TRIGGER_RISING 0x00000001 34#define IRQF_TRIGGER_FALLING 0x00000002 35#define IRQF_TRIGGER_HIGH 0x00000004 36#define IRQF_TRIGGER_LOW 0x00000008 37#define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \ 38 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING) 39#define IRQF_TRIGGER_PROBE 0x00000010 40 41/* 42 * These flags used only by the kernel as part of the 43 * irq handling routines. 44 * 45 * IRQF_DISABLED - keep irqs disabled when calling the action handler. 46 * DEPRECATED. This flag is a NOOP and scheduled to be removed 47 * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator 48 * IRQF_SHARED - allow sharing the irq among several devices 49 * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur 50 * IRQF_TIMER - Flag to mark this interrupt as timer interrupt 51 * IRQF_PERCPU - Interrupt is per cpu 52 * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing 53 * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is 54 * registered first in an shared interrupt is considered for 55 * performance reasons) 56 * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished. 57 * Used by threaded interrupts which need to keep the 58 * irq line disabled until the threaded handler has been run. 59 * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend 60 * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set 61 * IRQF_NO_THREAD - Interrupt cannot be threaded 62 */ 63#define IRQF_DISABLED 0x00000020 64#define IRQF_SAMPLE_RANDOM 0x00000040 65#define IRQF_SHARED 0x00000080 66#define IRQF_PROBE_SHARED 0x00000100 67#define __IRQF_TIMER 0x00000200 68#define IRQF_PERCPU 0x00000400 69#define IRQF_NOBALANCING 0x00000800 70#define IRQF_IRQPOLL 0x00001000 71#define IRQF_ONESHOT 0x00002000 72#define IRQF_NO_SUSPEND 0x00004000 73#define IRQF_FORCE_RESUME 0x00008000 74#define IRQF_NO_THREAD 0x00010000 75 76#define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD) 77 78/* 79 * These values can be returned by request_any_context_irq() and 80 * describe the context the interrupt will be run in. 81 * 82 * IRQC_IS_HARDIRQ - interrupt runs in hardirq context 83 * IRQC_IS_NESTED - interrupt runs in a nested threaded context 84 */ 85enum { 86 IRQC_IS_HARDIRQ = 0, 87 IRQC_IS_NESTED, 88}; 89 90typedef irqreturn_t (*irq_handler_t)(int, void *); 91 92/** 93 * struct irqaction - per interrupt action descriptor 94 * @handler: interrupt handler function 95 * @flags: flags (see IRQF_* above) 96 * @name: name of the device 97 * @dev_id: cookie to identify the device 98 * @next: pointer to the next irqaction for shared interrupts 99 * @irq: interrupt number 100 * @dir: pointer to the proc/irq/NN/name entry 101 * @thread_fn: interrupt handler function for threaded interrupts 102 * @thread: thread pointer for threaded interrupts 103 * @thread_flags: flags related to @thread 104 * @thread_mask: bitmask for keeping track of @thread activity 105 */ 106struct irqaction { 107 irq_handler_t handler; 108 unsigned long flags; 109 void *dev_id; 110 struct irqaction *next; 111 int irq; 112 irq_handler_t thread_fn; 113 struct task_struct *thread; 114 unsigned long thread_flags; 115 unsigned long thread_mask; 116 const char *name; 117 struct proc_dir_entry *dir; 118} ____cacheline_internodealigned_in_smp; 119 120extern irqreturn_t no_action(int cpl, void *dev_id); 121 122#ifdef CONFIG_GENERIC_HARDIRQS 123extern int __must_check 124request_threaded_irq(unsigned int irq, irq_handler_t handler, 125 irq_handler_t thread_fn, 126 unsigned long flags, const char *name, void *dev); 127 128static inline int __must_check 129request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, 130 const char *name, void *dev) 131{ 132 return request_threaded_irq(irq, handler, NULL, flags, name, dev); 133} 134 135extern int __must_check 136request_any_context_irq(unsigned int irq, irq_handler_t handler, 137 unsigned long flags, const char *name, void *dev_id); 138 139extern void exit_irq_thread(void); 140#else 141 142extern int __must_check 143request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, 144 const char *name, void *dev); 145 146/* 147 * Special function to avoid ifdeffery in kernel/irq/devres.c which 148 * gets magically built by GENERIC_HARDIRQS=n architectures (sparc, 149 * m68k). I really love these $@%#!* obvious Makefile references: 150 * ../../../kernel/irq/devres.o 151 */ 152static inline int __must_check 153request_threaded_irq(unsigned int irq, irq_handler_t handler, 154 irq_handler_t thread_fn, 155 unsigned long flags, const char *name, void *dev) 156{ 157 return request_irq(irq, handler, flags, name, dev); 158} 159 160static inline int __must_check 161request_any_context_irq(unsigned int irq, irq_handler_t handler, 162 unsigned long flags, const char *name, void *dev_id) 163{ 164 return request_irq(irq, handler, flags, name, dev_id); 165} 166 167static inline void exit_irq_thread(void) { } 168#endif 169 170extern void free_irq(unsigned int, void *); 171 172struct device; 173 174extern int __must_check 175devm_request_threaded_irq(struct device *dev, unsigned int irq, 176 irq_handler_t handler, irq_handler_t thread_fn, 177 unsigned long irqflags, const char *devname, 178 void *dev_id); 179 180static inline int __must_check 181devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler, 182 unsigned long irqflags, const char *devname, void *dev_id) 183{ 184 return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags, 185 devname, dev_id); 186} 187 188extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id); 189 190/* 191 * On lockdep we dont want to enable hardirqs in hardirq 192 * context. Use local_irq_enable_in_hardirq() to annotate 193 * kernel code that has to do this nevertheless (pretty much 194 * the only valid case is for old/broken hardware that is 195 * insanely slow). 196 * 197 * NOTE: in theory this might break fragile code that relies 198 * on hardirq delivery - in practice we dont seem to have such 199 * places left. So the only effect should be slightly increased 200 * irqs-off latencies. 201 */ 202#ifdef CONFIG_LOCKDEP 203# define local_irq_enable_in_hardirq() do { } while (0) 204#else 205# define local_irq_enable_in_hardirq() local_irq_enable() 206#endif 207 208extern void disable_irq_nosync(unsigned int irq); 209extern void disable_irq(unsigned int irq); 210extern void enable_irq(unsigned int irq); 211 212/* The following three functions are for the core kernel use only. */ 213#ifdef CONFIG_GENERIC_HARDIRQS 214extern void suspend_device_irqs(void); 215extern void resume_device_irqs(void); 216#ifdef CONFIG_PM_SLEEP 217extern int check_wakeup_irqs(void); 218#else 219static inline int check_wakeup_irqs(void) { return 0; } 220#endif 221#else 222static inline void suspend_device_irqs(void) { }; 223static inline void resume_device_irqs(void) { }; 224static inline int check_wakeup_irqs(void) { return 0; } 225#endif 226 227#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS) 228 229extern cpumask_var_t irq_default_affinity; 230 231extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask); 232extern int irq_can_set_affinity(unsigned int irq); 233extern int irq_select_affinity(unsigned int irq); 234 235extern int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m); 236 237/** 238 * struct irq_affinity_notify - context for notification of IRQ affinity changes 239 * @irq: Interrupt to which notification applies 240 * @kref: Reference count, for internal use 241 * @work: Work item, for internal use 242 * @notify: Function to be called on change. This will be 243 * called in process context. 244 * @release: Function to be called on release. This will be 245 * called in process context. Once registered, the 246 * structure must only be freed when this function is 247 * called or later. 248 */ 249struct irq_affinity_notify { 250 unsigned int irq; 251 struct kref kref; 252 struct work_struct work; 253 void (*notify)(struct irq_affinity_notify *, const cpumask_t *mask); 254 void (*release)(struct kref *ref); 255}; 256 257extern int 258irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify); 259 260static inline void irq_run_affinity_notifiers(void) 261{ 262 flush_scheduled_work(); 263} 264 265#else /* CONFIG_SMP */ 266 267static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m) 268{ 269 return -EINVAL; 270} 271 272static inline int irq_can_set_affinity(unsigned int irq) 273{ 274 return 0; 275} 276 277static inline int irq_select_affinity(unsigned int irq) { return 0; } 278 279static inline int irq_set_affinity_hint(unsigned int irq, 280 const struct cpumask *m) 281{ 282 return -EINVAL; 283} 284#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */ 285 286#ifdef CONFIG_GENERIC_HARDIRQS 287/* 288 * Special lockdep variants of irq disabling/enabling. 289 * These should be used for locking constructs that 290 * know that a particular irq context which is disabled, 291 * and which is the only irq-context user of a lock, 292 * that it's safe to take the lock in the irq-disabled 293 * section without disabling hardirqs. 294 * 295 * On !CONFIG_LOCKDEP they are equivalent to the normal 296 * irq disable/enable methods. 297 */ 298static inline void disable_irq_nosync_lockdep(unsigned int irq) 299{ 300 disable_irq_nosync(irq); 301#ifdef CONFIG_LOCKDEP 302 local_irq_disable(); 303#endif 304} 305 306static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags) 307{ 308 disable_irq_nosync(irq); 309#ifdef CONFIG_LOCKDEP 310 local_irq_save(*flags); 311#endif 312} 313 314static inline void disable_irq_lockdep(unsigned int irq) 315{ 316 disable_irq(irq); 317#ifdef CONFIG_LOCKDEP 318 local_irq_disable(); 319#endif 320} 321 322static inline void enable_irq_lockdep(unsigned int irq) 323{ 324#ifdef CONFIG_LOCKDEP 325 local_irq_enable(); 326#endif 327 enable_irq(irq); 328} 329 330static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags) 331{ 332#ifdef CONFIG_LOCKDEP 333 local_irq_restore(*flags); 334#endif 335 enable_irq(irq); 336} 337 338/* IRQ wakeup (PM) control: */ 339extern int irq_set_irq_wake(unsigned int irq, unsigned int on); 340 341static inline int enable_irq_wake(unsigned int irq) 342{ 343 return irq_set_irq_wake(irq, 1); 344} 345 346static inline int disable_irq_wake(unsigned int irq) 347{ 348 return irq_set_irq_wake(irq, 0); 349} 350 351#else /* !CONFIG_GENERIC_HARDIRQS */ 352/* 353 * NOTE: non-genirq architectures, if they want to support the lock 354 * validator need to define the methods below in their asm/irq.h 355 * files, under an #ifdef CONFIG_LOCKDEP section. 356 */ 357#ifndef CONFIG_LOCKDEP 358# define disable_irq_nosync_lockdep(irq) disable_irq_nosync(irq) 359# define disable_irq_nosync_lockdep_irqsave(irq, flags) \ 360 disable_irq_nosync(irq) 361# define disable_irq_lockdep(irq) disable_irq(irq) 362# define enable_irq_lockdep(irq) enable_irq(irq) 363# define enable_irq_lockdep_irqrestore(irq, flags) \ 364 enable_irq(irq) 365# endif 366 367static inline int enable_irq_wake(unsigned int irq) 368{ 369 return 0; 370} 371 372static inline int disable_irq_wake(unsigned int irq) 373{ 374 return 0; 375} 376#endif /* CONFIG_GENERIC_HARDIRQS */ 377 378 379#ifdef CONFIG_IRQ_FORCED_THREADING 380extern bool force_irqthreads; 381#else 382#define force_irqthreads (0) 383#endif 384 385#ifndef __ARCH_SET_SOFTIRQ_PENDING 386#define set_softirq_pending(x) (local_softirq_pending() = (x)) 387#define or_softirq_pending(x) (local_softirq_pending() |= (x)) 388#endif 389 390/* Some architectures might implement lazy enabling/disabling of 391 * interrupts. In some cases, such as stop_machine, we might want 392 * to ensure that after a local_irq_disable(), interrupts have 393 * really been disabled in hardware. Such architectures need to 394 * implement the following hook. 395 */ 396#ifndef hard_irq_disable 397#define hard_irq_disable() do { } while(0) 398#endif 399 400/* PLEASE, avoid to allocate new softirqs, if you need not _really_ high 401 frequency threaded job scheduling. For almost all the purposes 402 tasklets are more than enough. F.e. all serial device BHs et 403 al. should be converted to tasklets, not to softirqs. 404 */ 405 406enum 407{ 408 HI_SOFTIRQ=0, 409 TIMER_SOFTIRQ, 410 NET_TX_SOFTIRQ, 411 NET_RX_SOFTIRQ, 412 BLOCK_SOFTIRQ, 413 BLOCK_IOPOLL_SOFTIRQ, 414 TASKLET_SOFTIRQ, 415 SCHED_SOFTIRQ, 416 HRTIMER_SOFTIRQ, 417 RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ 418 419 NR_SOFTIRQS 420}; 421 422/* map softirq index to softirq name. update 'softirq_to_name' in 423 * kernel/softirq.c when adding a new softirq. 424 */ 425extern char *softirq_to_name[NR_SOFTIRQS]; 426 427/* softirq mask and active fields moved to irq_cpustat_t in 428 * asm/hardirq.h to get better cache usage. KAO 429 */ 430 431struct softirq_action 432{ 433 void (*action)(struct softirq_action *); 434}; 435 436asmlinkage void do_softirq(void); 437asmlinkage void __do_softirq(void); 438extern void open_softirq(int nr, void (*action)(struct softirq_action *)); 439extern void softirq_init(void); 440static inline void __raise_softirq_irqoff(unsigned int nr) 441{ 442 trace_softirq_raise(nr); 443 or_softirq_pending(1UL << nr); 444} 445 446extern void raise_softirq_irqoff(unsigned int nr); 447extern void raise_softirq(unsigned int nr); 448 449/* This is the worklist that queues up per-cpu softirq work. 450 * 451 * send_remote_sendirq() adds work to these lists, and 452 * the softirq handler itself dequeues from them. The queues 453 * are protected by disabling local cpu interrupts and they must 454 * only be accessed by the local cpu that they are for. 455 */ 456DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list); 457 458DECLARE_PER_CPU(struct task_struct *, ksoftirqd); 459 460static inline struct task_struct *this_cpu_ksoftirqd(void) 461{ 462 return this_cpu_read(ksoftirqd); 463} 464 465/* Try to send a softirq to a remote cpu. If this cannot be done, the 466 * work will be queued to the local cpu. 467 */ 468extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq); 469 470/* Like send_remote_softirq(), but the caller must disable local cpu interrupts 471 * and compute the current cpu, passed in as 'this_cpu'. 472 */ 473extern void __send_remote_softirq(struct call_single_data *cp, int cpu, 474 int this_cpu, int softirq); 475 476/* Tasklets --- multithreaded analogue of BHs. 477 478 Main feature differing them of generic softirqs: tasklet 479 is running only on one CPU simultaneously. 480 481 Main feature differing them of BHs: different tasklets 482 may be run simultaneously on different CPUs. 483 484 Properties: 485 * If tasklet_schedule() is called, then tasklet is guaranteed 486 to be executed on some cpu at least once after this. 487 * If the tasklet is already scheduled, but its execution is still not 488 started, it will be executed only once. 489 * If this tasklet is already running on another CPU (or schedule is called 490 from tasklet itself), it is rescheduled for later. 491 * Tasklet is strictly serialized wrt itself, but not 492 wrt another tasklets. If client needs some intertask synchronization, 493 he makes it with spinlocks. 494 */ 495 496struct tasklet_struct 497{ 498 struct tasklet_struct *next; 499 unsigned long state; 500 atomic_t count; 501 void (*func)(unsigned long); 502 unsigned long data; 503}; 504 505#define DECLARE_TASKLET(name, func, data) \ 506struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data } 507 508#define DECLARE_TASKLET_DISABLED(name, func, data) \ 509struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data } 510 511 512enum 513{ 514 TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */ 515 TASKLET_STATE_RUN /* Tasklet is running (SMP only) */ 516}; 517 518#ifdef CONFIG_SMP 519static inline int tasklet_trylock(struct tasklet_struct *t) 520{ 521 return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state); 522} 523 524static inline void tasklet_unlock(struct tasklet_struct *t) 525{ 526 smp_mb__before_clear_bit(); 527 clear_bit(TASKLET_STATE_RUN, &(t)->state); 528} 529 530static inline void tasklet_unlock_wait(struct tasklet_struct *t) 531{ 532 while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); } 533} 534#else 535#define tasklet_trylock(t) 1 536#define tasklet_unlock_wait(t) do { } while (0) 537#define tasklet_unlock(t) do { } while (0) 538#endif 539 540extern void __tasklet_schedule(struct tasklet_struct *t); 541 542static inline void tasklet_schedule(struct tasklet_struct *t) 543{ 544 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) 545 __tasklet_schedule(t); 546} 547 548extern void __tasklet_hi_schedule(struct tasklet_struct *t); 549 550static inline void tasklet_hi_schedule(struct tasklet_struct *t) 551{ 552 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) 553 __tasklet_hi_schedule(t); 554} 555 556extern void __tasklet_hi_schedule_first(struct tasklet_struct *t); 557 558/* 559 * This version avoids touching any other tasklets. Needed for kmemcheck 560 * in order not to take any page faults while enqueueing this tasklet; 561 * consider VERY carefully whether you really need this or 562 * tasklet_hi_schedule()... 563 */ 564static inline void tasklet_hi_schedule_first(struct tasklet_struct *t) 565{ 566 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) 567 __tasklet_hi_schedule_first(t); 568} 569 570 571static inline void tasklet_disable_nosync(struct tasklet_struct *t) 572{ 573 atomic_inc(&t->count); 574 smp_mb__after_atomic_inc(); 575} 576 577static inline void tasklet_disable(struct tasklet_struct *t) 578{ 579 tasklet_disable_nosync(t); 580 tasklet_unlock_wait(t); 581 smp_mb(); 582} 583 584static inline void tasklet_enable(struct tasklet_struct *t) 585{ 586 smp_mb__before_atomic_dec(); 587 atomic_dec(&t->count); 588} 589 590static inline void tasklet_hi_enable(struct tasklet_struct *t) 591{ 592 smp_mb__before_atomic_dec(); 593 atomic_dec(&t->count); 594} 595 596extern void tasklet_kill(struct tasklet_struct *t); 597extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu); 598extern void tasklet_init(struct tasklet_struct *t, 599 void (*func)(unsigned long), unsigned long data); 600 601struct tasklet_hrtimer { 602 struct hrtimer timer; 603 struct tasklet_struct tasklet; 604 enum hrtimer_restart (*function)(struct hrtimer *); 605}; 606 607extern void 608tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer, 609 enum hrtimer_restart (*function)(struct hrtimer *), 610 clockid_t which_clock, enum hrtimer_mode mode); 611 612static inline 613int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time, 614 const enum hrtimer_mode mode) 615{ 616 return hrtimer_start(&ttimer->timer, time, mode); 617} 618 619static inline 620void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer) 621{ 622 hrtimer_cancel(&ttimer->timer); 623 tasklet_kill(&ttimer->tasklet); 624} 625 626/* 627 * Autoprobing for irqs: 628 * 629 * probe_irq_on() and probe_irq_off() provide robust primitives 630 * for accurate IRQ probing during kernel initialization. They are 631 * reasonably simple to use, are not "fooled" by spurious interrupts, 632 * and, unlike other attempts at IRQ probing, they do not get hung on 633 * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards). 634 * 635 * For reasonably foolproof probing, use them as follows: 636 * 637 * 1. clear and/or mask the device's internal interrupt. 638 * 2. sti(); 639 * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs 640 * 4. enable the device and cause it to trigger an interrupt. 641 * 5. wait for the device to interrupt, using non-intrusive polling or a delay. 642 * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple 643 * 7. service the device to clear its pending interrupt. 644 * 8. loop again if paranoia is required. 645 * 646 * probe_irq_on() returns a mask of allocated irq's. 647 * 648 * probe_irq_off() takes the mask as a parameter, 649 * and returns the irq number which occurred, 650 * or zero if none occurred, or a negative irq number 651 * if more than one irq occurred. 652 */ 653 654#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 655static inline unsigned long probe_irq_on(void) 656{ 657 return 0; 658} 659static inline int probe_irq_off(unsigned long val) 660{ 661 return 0; 662} 663static inline unsigned int probe_irq_mask(unsigned long val) 664{ 665 return 0; 666} 667#else 668extern unsigned long probe_irq_on(void); /* returns 0 on failure */ 669extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */ 670extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */ 671#endif 672 673#ifdef CONFIG_PROC_FS 674/* Initialize /proc/irq/ */ 675extern void init_irq_proc(void); 676#else 677static inline void init_irq_proc(void) 678{ 679} 680#endif 681 682struct seq_file; 683int show_interrupts(struct seq_file *p, void *v); 684int arch_show_interrupts(struct seq_file *p, int prec); 685 686extern int early_irq_init(void); 687extern int arch_probe_nr_irqs(void); 688extern int arch_early_irq_init(void); 689 690#endif