Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
at v3.0 1315 lines 35 kB view raw
1/* 2 * Xilinx SystemACE device driver 3 * 4 * Copyright 2007 Secret Lab Technologies Ltd. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 as published 8 * by the Free Software Foundation. 9 */ 10 11/* 12 * The SystemACE chip is designed to configure FPGAs by loading an FPGA 13 * bitstream from a file on a CF card and squirting it into FPGAs connected 14 * to the SystemACE JTAG chain. It also has the advantage of providing an 15 * MPU interface which can be used to control the FPGA configuration process 16 * and to use the attached CF card for general purpose storage. 17 * 18 * This driver is a block device driver for the SystemACE. 19 * 20 * Initialization: 21 * The driver registers itself as a platform_device driver at module 22 * load time. The platform bus will take care of calling the 23 * ace_probe() method for all SystemACE instances in the system. Any 24 * number of SystemACE instances are supported. ace_probe() calls 25 * ace_setup() which initialized all data structures, reads the CF 26 * id structure and registers the device. 27 * 28 * Processing: 29 * Just about all of the heavy lifting in this driver is performed by 30 * a Finite State Machine (FSM). The driver needs to wait on a number 31 * of events; some raised by interrupts, some which need to be polled 32 * for. Describing all of the behaviour in a FSM seems to be the 33 * easiest way to keep the complexity low and make it easy to 34 * understand what the driver is doing. If the block ops or the 35 * request function need to interact with the hardware, then they 36 * simply need to flag the request and kick of FSM processing. 37 * 38 * The FSM itself is atomic-safe code which can be run from any 39 * context. The general process flow is: 40 * 1. obtain the ace->lock spinlock. 41 * 2. loop on ace_fsm_dostate() until the ace->fsm_continue flag is 42 * cleared. 43 * 3. release the lock. 44 * 45 * Individual states do not sleep in any way. If a condition needs to 46 * be waited for then the state much clear the fsm_continue flag and 47 * either schedule the FSM to be run again at a later time, or expect 48 * an interrupt to call the FSM when the desired condition is met. 49 * 50 * In normal operation, the FSM is processed at interrupt context 51 * either when the driver's tasklet is scheduled, or when an irq is 52 * raised by the hardware. The tasklet can be scheduled at any time. 53 * The request method in particular schedules the tasklet when a new 54 * request has been indicated by the block layer. Once started, the 55 * FSM proceeds as far as it can processing the request until it 56 * needs on a hardware event. At this point, it must yield execution. 57 * 58 * A state has two options when yielding execution: 59 * 1. ace_fsm_yield() 60 * - Call if need to poll for event. 61 * - clears the fsm_continue flag to exit the processing loop 62 * - reschedules the tasklet to run again as soon as possible 63 * 2. ace_fsm_yieldirq() 64 * - Call if an irq is expected from the HW 65 * - clears the fsm_continue flag to exit the processing loop 66 * - does not reschedule the tasklet so the FSM will not be processed 67 * again until an irq is received. 68 * After calling a yield function, the state must return control back 69 * to the FSM main loop. 70 * 71 * Additionally, the driver maintains a kernel timer which can process 72 * the FSM. If the FSM gets stalled, typically due to a missed 73 * interrupt, then the kernel timer will expire and the driver can 74 * continue where it left off. 75 * 76 * To Do: 77 * - Add FPGA configuration control interface. 78 * - Request major number from lanana 79 */ 80 81#undef DEBUG 82 83#include <linux/module.h> 84#include <linux/ctype.h> 85#include <linux/init.h> 86#include <linux/interrupt.h> 87#include <linux/errno.h> 88#include <linux/kernel.h> 89#include <linux/delay.h> 90#include <linux/slab.h> 91#include <linux/blkdev.h> 92#include <linux/mutex.h> 93#include <linux/ata.h> 94#include <linux/hdreg.h> 95#include <linux/platform_device.h> 96#if defined(CONFIG_OF) 97#include <linux/of_address.h> 98#include <linux/of_device.h> 99#include <linux/of_platform.h> 100#endif 101 102MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); 103MODULE_DESCRIPTION("Xilinx SystemACE device driver"); 104MODULE_LICENSE("GPL"); 105 106/* SystemACE register definitions */ 107#define ACE_BUSMODE (0x00) 108 109#define ACE_STATUS (0x04) 110#define ACE_STATUS_CFGLOCK (0x00000001) 111#define ACE_STATUS_MPULOCK (0x00000002) 112#define ACE_STATUS_CFGERROR (0x00000004) /* config controller error */ 113#define ACE_STATUS_CFCERROR (0x00000008) /* CF controller error */ 114#define ACE_STATUS_CFDETECT (0x00000010) 115#define ACE_STATUS_DATABUFRDY (0x00000020) 116#define ACE_STATUS_DATABUFMODE (0x00000040) 117#define ACE_STATUS_CFGDONE (0x00000080) 118#define ACE_STATUS_RDYFORCFCMD (0x00000100) 119#define ACE_STATUS_CFGMODEPIN (0x00000200) 120#define ACE_STATUS_CFGADDR_MASK (0x0000e000) 121#define ACE_STATUS_CFBSY (0x00020000) 122#define ACE_STATUS_CFRDY (0x00040000) 123#define ACE_STATUS_CFDWF (0x00080000) 124#define ACE_STATUS_CFDSC (0x00100000) 125#define ACE_STATUS_CFDRQ (0x00200000) 126#define ACE_STATUS_CFCORR (0x00400000) 127#define ACE_STATUS_CFERR (0x00800000) 128 129#define ACE_ERROR (0x08) 130#define ACE_CFGLBA (0x0c) 131#define ACE_MPULBA (0x10) 132 133#define ACE_SECCNTCMD (0x14) 134#define ACE_SECCNTCMD_RESET (0x0100) 135#define ACE_SECCNTCMD_IDENTIFY (0x0200) 136#define ACE_SECCNTCMD_READ_DATA (0x0300) 137#define ACE_SECCNTCMD_WRITE_DATA (0x0400) 138#define ACE_SECCNTCMD_ABORT (0x0600) 139 140#define ACE_VERSION (0x16) 141#define ACE_VERSION_REVISION_MASK (0x00FF) 142#define ACE_VERSION_MINOR_MASK (0x0F00) 143#define ACE_VERSION_MAJOR_MASK (0xF000) 144 145#define ACE_CTRL (0x18) 146#define ACE_CTRL_FORCELOCKREQ (0x0001) 147#define ACE_CTRL_LOCKREQ (0x0002) 148#define ACE_CTRL_FORCECFGADDR (0x0004) 149#define ACE_CTRL_FORCECFGMODE (0x0008) 150#define ACE_CTRL_CFGMODE (0x0010) 151#define ACE_CTRL_CFGSTART (0x0020) 152#define ACE_CTRL_CFGSEL (0x0040) 153#define ACE_CTRL_CFGRESET (0x0080) 154#define ACE_CTRL_DATABUFRDYIRQ (0x0100) 155#define ACE_CTRL_ERRORIRQ (0x0200) 156#define ACE_CTRL_CFGDONEIRQ (0x0400) 157#define ACE_CTRL_RESETIRQ (0x0800) 158#define ACE_CTRL_CFGPROG (0x1000) 159#define ACE_CTRL_CFGADDR_MASK (0xe000) 160 161#define ACE_FATSTAT (0x1c) 162 163#define ACE_NUM_MINORS 16 164#define ACE_SECTOR_SIZE (512) 165#define ACE_FIFO_SIZE (32) 166#define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE) 167 168#define ACE_BUS_WIDTH_8 0 169#define ACE_BUS_WIDTH_16 1 170 171struct ace_reg_ops; 172 173struct ace_device { 174 /* driver state data */ 175 int id; 176 int media_change; 177 int users; 178 struct list_head list; 179 180 /* finite state machine data */ 181 struct tasklet_struct fsm_tasklet; 182 uint fsm_task; /* Current activity (ACE_TASK_*) */ 183 uint fsm_state; /* Current state (ACE_FSM_STATE_*) */ 184 uint fsm_continue_flag; /* cleared to exit FSM mainloop */ 185 uint fsm_iter_num; 186 struct timer_list stall_timer; 187 188 /* Transfer state/result, use for both id and block request */ 189 struct request *req; /* request being processed */ 190 void *data_ptr; /* pointer to I/O buffer */ 191 int data_count; /* number of buffers remaining */ 192 int data_result; /* Result of transfer; 0 := success */ 193 194 int id_req_count; /* count of id requests */ 195 int id_result; 196 struct completion id_completion; /* used when id req finishes */ 197 int in_irq; 198 199 /* Details of hardware device */ 200 resource_size_t physaddr; 201 void __iomem *baseaddr; 202 int irq; 203 int bus_width; /* 0 := 8 bit; 1 := 16 bit */ 204 struct ace_reg_ops *reg_ops; 205 int lock_count; 206 207 /* Block device data structures */ 208 spinlock_t lock; 209 struct device *dev; 210 struct request_queue *queue; 211 struct gendisk *gd; 212 213 /* Inserted CF card parameters */ 214 u16 cf_id[ATA_ID_WORDS]; 215}; 216 217static DEFINE_MUTEX(xsysace_mutex); 218static int ace_major; 219 220/* --------------------------------------------------------------------- 221 * Low level register access 222 */ 223 224struct ace_reg_ops { 225 u16(*in) (struct ace_device * ace, int reg); 226 void (*out) (struct ace_device * ace, int reg, u16 val); 227 void (*datain) (struct ace_device * ace); 228 void (*dataout) (struct ace_device * ace); 229}; 230 231/* 8 Bit bus width */ 232static u16 ace_in_8(struct ace_device *ace, int reg) 233{ 234 void __iomem *r = ace->baseaddr + reg; 235 return in_8(r) | (in_8(r + 1) << 8); 236} 237 238static void ace_out_8(struct ace_device *ace, int reg, u16 val) 239{ 240 void __iomem *r = ace->baseaddr + reg; 241 out_8(r, val); 242 out_8(r + 1, val >> 8); 243} 244 245static void ace_datain_8(struct ace_device *ace) 246{ 247 void __iomem *r = ace->baseaddr + 0x40; 248 u8 *dst = ace->data_ptr; 249 int i = ACE_FIFO_SIZE; 250 while (i--) 251 *dst++ = in_8(r++); 252 ace->data_ptr = dst; 253} 254 255static void ace_dataout_8(struct ace_device *ace) 256{ 257 void __iomem *r = ace->baseaddr + 0x40; 258 u8 *src = ace->data_ptr; 259 int i = ACE_FIFO_SIZE; 260 while (i--) 261 out_8(r++, *src++); 262 ace->data_ptr = src; 263} 264 265static struct ace_reg_ops ace_reg_8_ops = { 266 .in = ace_in_8, 267 .out = ace_out_8, 268 .datain = ace_datain_8, 269 .dataout = ace_dataout_8, 270}; 271 272/* 16 bit big endian bus attachment */ 273static u16 ace_in_be16(struct ace_device *ace, int reg) 274{ 275 return in_be16(ace->baseaddr + reg); 276} 277 278static void ace_out_be16(struct ace_device *ace, int reg, u16 val) 279{ 280 out_be16(ace->baseaddr + reg, val); 281} 282 283static void ace_datain_be16(struct ace_device *ace) 284{ 285 int i = ACE_FIFO_SIZE / 2; 286 u16 *dst = ace->data_ptr; 287 while (i--) 288 *dst++ = in_le16(ace->baseaddr + 0x40); 289 ace->data_ptr = dst; 290} 291 292static void ace_dataout_be16(struct ace_device *ace) 293{ 294 int i = ACE_FIFO_SIZE / 2; 295 u16 *src = ace->data_ptr; 296 while (i--) 297 out_le16(ace->baseaddr + 0x40, *src++); 298 ace->data_ptr = src; 299} 300 301/* 16 bit little endian bus attachment */ 302static u16 ace_in_le16(struct ace_device *ace, int reg) 303{ 304 return in_le16(ace->baseaddr + reg); 305} 306 307static void ace_out_le16(struct ace_device *ace, int reg, u16 val) 308{ 309 out_le16(ace->baseaddr + reg, val); 310} 311 312static void ace_datain_le16(struct ace_device *ace) 313{ 314 int i = ACE_FIFO_SIZE / 2; 315 u16 *dst = ace->data_ptr; 316 while (i--) 317 *dst++ = in_be16(ace->baseaddr + 0x40); 318 ace->data_ptr = dst; 319} 320 321static void ace_dataout_le16(struct ace_device *ace) 322{ 323 int i = ACE_FIFO_SIZE / 2; 324 u16 *src = ace->data_ptr; 325 while (i--) 326 out_be16(ace->baseaddr + 0x40, *src++); 327 ace->data_ptr = src; 328} 329 330static struct ace_reg_ops ace_reg_be16_ops = { 331 .in = ace_in_be16, 332 .out = ace_out_be16, 333 .datain = ace_datain_be16, 334 .dataout = ace_dataout_be16, 335}; 336 337static struct ace_reg_ops ace_reg_le16_ops = { 338 .in = ace_in_le16, 339 .out = ace_out_le16, 340 .datain = ace_datain_le16, 341 .dataout = ace_dataout_le16, 342}; 343 344static inline u16 ace_in(struct ace_device *ace, int reg) 345{ 346 return ace->reg_ops->in(ace, reg); 347} 348 349static inline u32 ace_in32(struct ace_device *ace, int reg) 350{ 351 return ace_in(ace, reg) | (ace_in(ace, reg + 2) << 16); 352} 353 354static inline void ace_out(struct ace_device *ace, int reg, u16 val) 355{ 356 ace->reg_ops->out(ace, reg, val); 357} 358 359static inline void ace_out32(struct ace_device *ace, int reg, u32 val) 360{ 361 ace_out(ace, reg, val); 362 ace_out(ace, reg + 2, val >> 16); 363} 364 365/* --------------------------------------------------------------------- 366 * Debug support functions 367 */ 368 369#if defined(DEBUG) 370static void ace_dump_mem(void *base, int len) 371{ 372 const char *ptr = base; 373 int i, j; 374 375 for (i = 0; i < len; i += 16) { 376 printk(KERN_INFO "%.8x:", i); 377 for (j = 0; j < 16; j++) { 378 if (!(j % 4)) 379 printk(" "); 380 printk("%.2x", ptr[i + j]); 381 } 382 printk(" "); 383 for (j = 0; j < 16; j++) 384 printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.'); 385 printk("\n"); 386 } 387} 388#else 389static inline void ace_dump_mem(void *base, int len) 390{ 391} 392#endif 393 394static void ace_dump_regs(struct ace_device *ace) 395{ 396 dev_info(ace->dev, 397 " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" 398 " status:%.8x mpu_lba:%.8x busmode:%4x\n" 399 " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", 400 ace_in32(ace, ACE_CTRL), 401 ace_in(ace, ACE_SECCNTCMD), 402 ace_in(ace, ACE_VERSION), 403 ace_in32(ace, ACE_STATUS), 404 ace_in32(ace, ACE_MPULBA), 405 ace_in(ace, ACE_BUSMODE), 406 ace_in32(ace, ACE_ERROR), 407 ace_in32(ace, ACE_CFGLBA), ace_in(ace, ACE_FATSTAT)); 408} 409 410void ace_fix_driveid(u16 *id) 411{ 412#if defined(__BIG_ENDIAN) 413 int i; 414 415 /* All half words have wrong byte order; swap the bytes */ 416 for (i = 0; i < ATA_ID_WORDS; i++, id++) 417 *id = le16_to_cpu(*id); 418#endif 419} 420 421/* --------------------------------------------------------------------- 422 * Finite State Machine (FSM) implementation 423 */ 424 425/* FSM tasks; used to direct state transitions */ 426#define ACE_TASK_IDLE 0 427#define ACE_TASK_IDENTIFY 1 428#define ACE_TASK_READ 2 429#define ACE_TASK_WRITE 3 430#define ACE_FSM_NUM_TASKS 4 431 432/* FSM state definitions */ 433#define ACE_FSM_STATE_IDLE 0 434#define ACE_FSM_STATE_REQ_LOCK 1 435#define ACE_FSM_STATE_WAIT_LOCK 2 436#define ACE_FSM_STATE_WAIT_CFREADY 3 437#define ACE_FSM_STATE_IDENTIFY_PREPARE 4 438#define ACE_FSM_STATE_IDENTIFY_TRANSFER 5 439#define ACE_FSM_STATE_IDENTIFY_COMPLETE 6 440#define ACE_FSM_STATE_REQ_PREPARE 7 441#define ACE_FSM_STATE_REQ_TRANSFER 8 442#define ACE_FSM_STATE_REQ_COMPLETE 9 443#define ACE_FSM_STATE_ERROR 10 444#define ACE_FSM_NUM_STATES 11 445 446/* Set flag to exit FSM loop and reschedule tasklet */ 447static inline void ace_fsm_yield(struct ace_device *ace) 448{ 449 dev_dbg(ace->dev, "ace_fsm_yield()\n"); 450 tasklet_schedule(&ace->fsm_tasklet); 451 ace->fsm_continue_flag = 0; 452} 453 454/* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */ 455static inline void ace_fsm_yieldirq(struct ace_device *ace) 456{ 457 dev_dbg(ace->dev, "ace_fsm_yieldirq()\n"); 458 459 if (ace->irq == NO_IRQ) 460 /* No IRQ assigned, so need to poll */ 461 tasklet_schedule(&ace->fsm_tasklet); 462 ace->fsm_continue_flag = 0; 463} 464 465/* Get the next read/write request; ending requests that we don't handle */ 466struct request *ace_get_next_request(struct request_queue * q) 467{ 468 struct request *req; 469 470 while ((req = blk_peek_request(q)) != NULL) { 471 if (req->cmd_type == REQ_TYPE_FS) 472 break; 473 blk_start_request(req); 474 __blk_end_request_all(req, -EIO); 475 } 476 return req; 477} 478 479static void ace_fsm_dostate(struct ace_device *ace) 480{ 481 struct request *req; 482 u32 status; 483 u16 val; 484 int count; 485 486#if defined(DEBUG) 487 dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n", 488 ace->fsm_state, ace->id_req_count); 489#endif 490 491 /* Verify that there is actually a CF in the slot. If not, then 492 * bail out back to the idle state and wake up all the waiters */ 493 status = ace_in32(ace, ACE_STATUS); 494 if ((status & ACE_STATUS_CFDETECT) == 0) { 495 ace->fsm_state = ACE_FSM_STATE_IDLE; 496 ace->media_change = 1; 497 set_capacity(ace->gd, 0); 498 dev_info(ace->dev, "No CF in slot\n"); 499 500 /* Drop all in-flight and pending requests */ 501 if (ace->req) { 502 __blk_end_request_all(ace->req, -EIO); 503 ace->req = NULL; 504 } 505 while ((req = blk_fetch_request(ace->queue)) != NULL) 506 __blk_end_request_all(req, -EIO); 507 508 /* Drop back to IDLE state and notify waiters */ 509 ace->fsm_state = ACE_FSM_STATE_IDLE; 510 ace->id_result = -EIO; 511 while (ace->id_req_count) { 512 complete(&ace->id_completion); 513 ace->id_req_count--; 514 } 515 } 516 517 switch (ace->fsm_state) { 518 case ACE_FSM_STATE_IDLE: 519 /* See if there is anything to do */ 520 if (ace->id_req_count || ace_get_next_request(ace->queue)) { 521 ace->fsm_iter_num++; 522 ace->fsm_state = ACE_FSM_STATE_REQ_LOCK; 523 mod_timer(&ace->stall_timer, jiffies + HZ); 524 if (!timer_pending(&ace->stall_timer)) 525 add_timer(&ace->stall_timer); 526 break; 527 } 528 del_timer(&ace->stall_timer); 529 ace->fsm_continue_flag = 0; 530 break; 531 532 case ACE_FSM_STATE_REQ_LOCK: 533 if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) { 534 /* Already have the lock, jump to next state */ 535 ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY; 536 break; 537 } 538 539 /* Request the lock */ 540 val = ace_in(ace, ACE_CTRL); 541 ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ); 542 ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK; 543 break; 544 545 case ACE_FSM_STATE_WAIT_LOCK: 546 if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) { 547 /* got the lock; move to next state */ 548 ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY; 549 break; 550 } 551 552 /* wait a bit for the lock */ 553 ace_fsm_yield(ace); 554 break; 555 556 case ACE_FSM_STATE_WAIT_CFREADY: 557 status = ace_in32(ace, ACE_STATUS); 558 if (!(status & ACE_STATUS_RDYFORCFCMD) || 559 (status & ACE_STATUS_CFBSY)) { 560 /* CF card isn't ready; it needs to be polled */ 561 ace_fsm_yield(ace); 562 break; 563 } 564 565 /* Device is ready for command; determine what to do next */ 566 if (ace->id_req_count) 567 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE; 568 else 569 ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE; 570 break; 571 572 case ACE_FSM_STATE_IDENTIFY_PREPARE: 573 /* Send identify command */ 574 ace->fsm_task = ACE_TASK_IDENTIFY; 575 ace->data_ptr = ace->cf_id; 576 ace->data_count = ACE_BUF_PER_SECTOR; 577 ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY); 578 579 /* As per datasheet, put config controller in reset */ 580 val = ace_in(ace, ACE_CTRL); 581 ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET); 582 583 /* irq handler takes over from this point; wait for the 584 * transfer to complete */ 585 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER; 586 ace_fsm_yieldirq(ace); 587 break; 588 589 case ACE_FSM_STATE_IDENTIFY_TRANSFER: 590 /* Check that the sysace is ready to receive data */ 591 status = ace_in32(ace, ACE_STATUS); 592 if (status & ACE_STATUS_CFBSY) { 593 dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n", 594 ace->fsm_task, ace->fsm_iter_num, 595 ace->data_count); 596 ace_fsm_yield(ace); 597 break; 598 } 599 if (!(status & ACE_STATUS_DATABUFRDY)) { 600 ace_fsm_yield(ace); 601 break; 602 } 603 604 /* Transfer the next buffer */ 605 ace->reg_ops->datain(ace); 606 ace->data_count--; 607 608 /* If there are still buffers to be transfers; jump out here */ 609 if (ace->data_count != 0) { 610 ace_fsm_yieldirq(ace); 611 break; 612 } 613 614 /* transfer finished; kick state machine */ 615 dev_dbg(ace->dev, "identify finished\n"); 616 ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE; 617 break; 618 619 case ACE_FSM_STATE_IDENTIFY_COMPLETE: 620 ace_fix_driveid(ace->cf_id); 621 ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */ 622 623 if (ace->data_result) { 624 /* Error occurred, disable the disk */ 625 ace->media_change = 1; 626 set_capacity(ace->gd, 0); 627 dev_err(ace->dev, "error fetching CF id (%i)\n", 628 ace->data_result); 629 } else { 630 ace->media_change = 0; 631 632 /* Record disk parameters */ 633 set_capacity(ace->gd, 634 ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY)); 635 dev_info(ace->dev, "capacity: %i sectors\n", 636 ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY)); 637 } 638 639 /* We're done, drop to IDLE state and notify waiters */ 640 ace->fsm_state = ACE_FSM_STATE_IDLE; 641 ace->id_result = ace->data_result; 642 while (ace->id_req_count) { 643 complete(&ace->id_completion); 644 ace->id_req_count--; 645 } 646 break; 647 648 case ACE_FSM_STATE_REQ_PREPARE: 649 req = ace_get_next_request(ace->queue); 650 if (!req) { 651 ace->fsm_state = ACE_FSM_STATE_IDLE; 652 break; 653 } 654 blk_start_request(req); 655 656 /* Okay, it's a data request, set it up for transfer */ 657 dev_dbg(ace->dev, 658 "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n", 659 (unsigned long long)blk_rq_pos(req), 660 blk_rq_sectors(req), blk_rq_cur_sectors(req), 661 rq_data_dir(req)); 662 663 ace->req = req; 664 ace->data_ptr = req->buffer; 665 ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR; 666 ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF); 667 668 count = blk_rq_sectors(req); 669 if (rq_data_dir(req)) { 670 /* Kick off write request */ 671 dev_dbg(ace->dev, "write data\n"); 672 ace->fsm_task = ACE_TASK_WRITE; 673 ace_out(ace, ACE_SECCNTCMD, 674 count | ACE_SECCNTCMD_WRITE_DATA); 675 } else { 676 /* Kick off read request */ 677 dev_dbg(ace->dev, "read data\n"); 678 ace->fsm_task = ACE_TASK_READ; 679 ace_out(ace, ACE_SECCNTCMD, 680 count | ACE_SECCNTCMD_READ_DATA); 681 } 682 683 /* As per datasheet, put config controller in reset */ 684 val = ace_in(ace, ACE_CTRL); 685 ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET); 686 687 /* Move to the transfer state. The systemace will raise 688 * an interrupt once there is something to do 689 */ 690 ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER; 691 if (ace->fsm_task == ACE_TASK_READ) 692 ace_fsm_yieldirq(ace); /* wait for data ready */ 693 break; 694 695 case ACE_FSM_STATE_REQ_TRANSFER: 696 /* Check that the sysace is ready to receive data */ 697 status = ace_in32(ace, ACE_STATUS); 698 if (status & ACE_STATUS_CFBSY) { 699 dev_dbg(ace->dev, 700 "CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n", 701 ace->fsm_task, ace->fsm_iter_num, 702 blk_rq_cur_sectors(ace->req) * 16, 703 ace->data_count, ace->in_irq); 704 ace_fsm_yield(ace); /* need to poll CFBSY bit */ 705 break; 706 } 707 if (!(status & ACE_STATUS_DATABUFRDY)) { 708 dev_dbg(ace->dev, 709 "DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n", 710 ace->fsm_task, ace->fsm_iter_num, 711 blk_rq_cur_sectors(ace->req) * 16, 712 ace->data_count, ace->in_irq); 713 ace_fsm_yieldirq(ace); 714 break; 715 } 716 717 /* Transfer the next buffer */ 718 if (ace->fsm_task == ACE_TASK_WRITE) 719 ace->reg_ops->dataout(ace); 720 else 721 ace->reg_ops->datain(ace); 722 ace->data_count--; 723 724 /* If there are still buffers to be transfers; jump out here */ 725 if (ace->data_count != 0) { 726 ace_fsm_yieldirq(ace); 727 break; 728 } 729 730 /* bio finished; is there another one? */ 731 if (__blk_end_request_cur(ace->req, 0)) { 732 /* dev_dbg(ace->dev, "next block; h=%u c=%u\n", 733 * blk_rq_sectors(ace->req), 734 * blk_rq_cur_sectors(ace->req)); 735 */ 736 ace->data_ptr = ace->req->buffer; 737 ace->data_count = blk_rq_cur_sectors(ace->req) * 16; 738 ace_fsm_yieldirq(ace); 739 break; 740 } 741 742 ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE; 743 break; 744 745 case ACE_FSM_STATE_REQ_COMPLETE: 746 ace->req = NULL; 747 748 /* Finished request; go to idle state */ 749 ace->fsm_state = ACE_FSM_STATE_IDLE; 750 break; 751 752 default: 753 ace->fsm_state = ACE_FSM_STATE_IDLE; 754 break; 755 } 756} 757 758static void ace_fsm_tasklet(unsigned long data) 759{ 760 struct ace_device *ace = (void *)data; 761 unsigned long flags; 762 763 spin_lock_irqsave(&ace->lock, flags); 764 765 /* Loop over state machine until told to stop */ 766 ace->fsm_continue_flag = 1; 767 while (ace->fsm_continue_flag) 768 ace_fsm_dostate(ace); 769 770 spin_unlock_irqrestore(&ace->lock, flags); 771} 772 773static void ace_stall_timer(unsigned long data) 774{ 775 struct ace_device *ace = (void *)data; 776 unsigned long flags; 777 778 dev_warn(ace->dev, 779 "kicking stalled fsm; state=%i task=%i iter=%i dc=%i\n", 780 ace->fsm_state, ace->fsm_task, ace->fsm_iter_num, 781 ace->data_count); 782 spin_lock_irqsave(&ace->lock, flags); 783 784 /* Rearm the stall timer *before* entering FSM (which may then 785 * delete the timer) */ 786 mod_timer(&ace->stall_timer, jiffies + HZ); 787 788 /* Loop over state machine until told to stop */ 789 ace->fsm_continue_flag = 1; 790 while (ace->fsm_continue_flag) 791 ace_fsm_dostate(ace); 792 793 spin_unlock_irqrestore(&ace->lock, flags); 794} 795 796/* --------------------------------------------------------------------- 797 * Interrupt handling routines 798 */ 799static int ace_interrupt_checkstate(struct ace_device *ace) 800{ 801 u32 sreg = ace_in32(ace, ACE_STATUS); 802 u16 creg = ace_in(ace, ACE_CTRL); 803 804 /* Check for error occurrence */ 805 if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) && 806 (creg & ACE_CTRL_ERRORIRQ)) { 807 dev_err(ace->dev, "transfer failure\n"); 808 ace_dump_regs(ace); 809 return -EIO; 810 } 811 812 return 0; 813} 814 815static irqreturn_t ace_interrupt(int irq, void *dev_id) 816{ 817 u16 creg; 818 struct ace_device *ace = dev_id; 819 820 /* be safe and get the lock */ 821 spin_lock(&ace->lock); 822 ace->in_irq = 1; 823 824 /* clear the interrupt */ 825 creg = ace_in(ace, ACE_CTRL); 826 ace_out(ace, ACE_CTRL, creg | ACE_CTRL_RESETIRQ); 827 ace_out(ace, ACE_CTRL, creg); 828 829 /* check for IO failures */ 830 if (ace_interrupt_checkstate(ace)) 831 ace->data_result = -EIO; 832 833 if (ace->fsm_task == 0) { 834 dev_err(ace->dev, 835 "spurious irq; stat=%.8x ctrl=%.8x cmd=%.4x\n", 836 ace_in32(ace, ACE_STATUS), ace_in32(ace, ACE_CTRL), 837 ace_in(ace, ACE_SECCNTCMD)); 838 dev_err(ace->dev, "fsm_task=%i fsm_state=%i data_count=%i\n", 839 ace->fsm_task, ace->fsm_state, ace->data_count); 840 } 841 842 /* Loop over state machine until told to stop */ 843 ace->fsm_continue_flag = 1; 844 while (ace->fsm_continue_flag) 845 ace_fsm_dostate(ace); 846 847 /* done with interrupt; drop the lock */ 848 ace->in_irq = 0; 849 spin_unlock(&ace->lock); 850 851 return IRQ_HANDLED; 852} 853 854/* --------------------------------------------------------------------- 855 * Block ops 856 */ 857static void ace_request(struct request_queue * q) 858{ 859 struct request *req; 860 struct ace_device *ace; 861 862 req = ace_get_next_request(q); 863 864 if (req) { 865 ace = req->rq_disk->private_data; 866 tasklet_schedule(&ace->fsm_tasklet); 867 } 868} 869 870static unsigned int ace_check_events(struct gendisk *gd, unsigned int clearing) 871{ 872 struct ace_device *ace = gd->private_data; 873 dev_dbg(ace->dev, "ace_check_events(): %i\n", ace->media_change); 874 875 return ace->media_change ? DISK_EVENT_MEDIA_CHANGE : 0; 876} 877 878static int ace_revalidate_disk(struct gendisk *gd) 879{ 880 struct ace_device *ace = gd->private_data; 881 unsigned long flags; 882 883 dev_dbg(ace->dev, "ace_revalidate_disk()\n"); 884 885 if (ace->media_change) { 886 dev_dbg(ace->dev, "requesting cf id and scheduling tasklet\n"); 887 888 spin_lock_irqsave(&ace->lock, flags); 889 ace->id_req_count++; 890 spin_unlock_irqrestore(&ace->lock, flags); 891 892 tasklet_schedule(&ace->fsm_tasklet); 893 wait_for_completion(&ace->id_completion); 894 } 895 896 dev_dbg(ace->dev, "revalidate complete\n"); 897 return ace->id_result; 898} 899 900static int ace_open(struct block_device *bdev, fmode_t mode) 901{ 902 struct ace_device *ace = bdev->bd_disk->private_data; 903 unsigned long flags; 904 905 dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1); 906 907 mutex_lock(&xsysace_mutex); 908 spin_lock_irqsave(&ace->lock, flags); 909 ace->users++; 910 spin_unlock_irqrestore(&ace->lock, flags); 911 912 check_disk_change(bdev); 913 mutex_unlock(&xsysace_mutex); 914 915 return 0; 916} 917 918static int ace_release(struct gendisk *disk, fmode_t mode) 919{ 920 struct ace_device *ace = disk->private_data; 921 unsigned long flags; 922 u16 val; 923 924 dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1); 925 926 mutex_lock(&xsysace_mutex); 927 spin_lock_irqsave(&ace->lock, flags); 928 ace->users--; 929 if (ace->users == 0) { 930 val = ace_in(ace, ACE_CTRL); 931 ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ); 932 } 933 spin_unlock_irqrestore(&ace->lock, flags); 934 mutex_unlock(&xsysace_mutex); 935 return 0; 936} 937 938static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo) 939{ 940 struct ace_device *ace = bdev->bd_disk->private_data; 941 u16 *cf_id = ace->cf_id; 942 943 dev_dbg(ace->dev, "ace_getgeo()\n"); 944 945 geo->heads = cf_id[ATA_ID_HEADS]; 946 geo->sectors = cf_id[ATA_ID_SECTORS]; 947 geo->cylinders = cf_id[ATA_ID_CYLS]; 948 949 return 0; 950} 951 952static const struct block_device_operations ace_fops = { 953 .owner = THIS_MODULE, 954 .open = ace_open, 955 .release = ace_release, 956 .check_events = ace_check_events, 957 .revalidate_disk = ace_revalidate_disk, 958 .getgeo = ace_getgeo, 959}; 960 961/* -------------------------------------------------------------------- 962 * SystemACE device setup/teardown code 963 */ 964static int __devinit ace_setup(struct ace_device *ace) 965{ 966 u16 version; 967 u16 val; 968 int rc; 969 970 dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace); 971 dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n", 972 (unsigned long long)ace->physaddr, ace->irq); 973 974 spin_lock_init(&ace->lock); 975 init_completion(&ace->id_completion); 976 977 /* 978 * Map the device 979 */ 980 ace->baseaddr = ioremap(ace->physaddr, 0x80); 981 if (!ace->baseaddr) 982 goto err_ioremap; 983 984 /* 985 * Initialize the state machine tasklet and stall timer 986 */ 987 tasklet_init(&ace->fsm_tasklet, ace_fsm_tasklet, (unsigned long)ace); 988 setup_timer(&ace->stall_timer, ace_stall_timer, (unsigned long)ace); 989 990 /* 991 * Initialize the request queue 992 */ 993 ace->queue = blk_init_queue(ace_request, &ace->lock); 994 if (ace->queue == NULL) 995 goto err_blk_initq; 996 blk_queue_logical_block_size(ace->queue, 512); 997 998 /* 999 * Allocate and initialize GD structure 1000 */ 1001 ace->gd = alloc_disk(ACE_NUM_MINORS); 1002 if (!ace->gd) 1003 goto err_alloc_disk; 1004 1005 ace->gd->major = ace_major; 1006 ace->gd->first_minor = ace->id * ACE_NUM_MINORS; 1007 ace->gd->fops = &ace_fops; 1008 ace->gd->queue = ace->queue; 1009 ace->gd->private_data = ace; 1010 snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a'); 1011 1012 /* set bus width */ 1013 if (ace->bus_width == ACE_BUS_WIDTH_16) { 1014 /* 0x0101 should work regardless of endianess */ 1015 ace_out_le16(ace, ACE_BUSMODE, 0x0101); 1016 1017 /* read it back to determine endianess */ 1018 if (ace_in_le16(ace, ACE_BUSMODE) == 0x0001) 1019 ace->reg_ops = &ace_reg_le16_ops; 1020 else 1021 ace->reg_ops = &ace_reg_be16_ops; 1022 } else { 1023 ace_out_8(ace, ACE_BUSMODE, 0x00); 1024 ace->reg_ops = &ace_reg_8_ops; 1025 } 1026 1027 /* Make sure version register is sane */ 1028 version = ace_in(ace, ACE_VERSION); 1029 if ((version == 0) || (version == 0xFFFF)) 1030 goto err_read; 1031 1032 /* Put sysace in a sane state by clearing most control reg bits */ 1033 ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE | 1034 ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ); 1035 1036 /* Now we can hook up the irq handler */ 1037 if (ace->irq != NO_IRQ) { 1038 rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace); 1039 if (rc) { 1040 /* Failure - fall back to polled mode */ 1041 dev_err(ace->dev, "request_irq failed\n"); 1042 ace->irq = NO_IRQ; 1043 } 1044 } 1045 1046 /* Enable interrupts */ 1047 val = ace_in(ace, ACE_CTRL); 1048 val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ; 1049 ace_out(ace, ACE_CTRL, val); 1050 1051 /* Print the identification */ 1052 dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n", 1053 (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff); 1054 dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n", 1055 (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq); 1056 1057 ace->media_change = 1; 1058 ace_revalidate_disk(ace->gd); 1059 1060 /* Make the sysace device 'live' */ 1061 add_disk(ace->gd); 1062 1063 return 0; 1064 1065err_read: 1066 put_disk(ace->gd); 1067err_alloc_disk: 1068 blk_cleanup_queue(ace->queue); 1069err_blk_initq: 1070 iounmap(ace->baseaddr); 1071err_ioremap: 1072 dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n", 1073 (unsigned long long) ace->physaddr); 1074 return -ENOMEM; 1075} 1076 1077static void __devexit ace_teardown(struct ace_device *ace) 1078{ 1079 if (ace->gd) { 1080 del_gendisk(ace->gd); 1081 put_disk(ace->gd); 1082 } 1083 1084 if (ace->queue) 1085 blk_cleanup_queue(ace->queue); 1086 1087 tasklet_kill(&ace->fsm_tasklet); 1088 1089 if (ace->irq != NO_IRQ) 1090 free_irq(ace->irq, ace); 1091 1092 iounmap(ace->baseaddr); 1093} 1094 1095static int __devinit 1096ace_alloc(struct device *dev, int id, resource_size_t physaddr, 1097 int irq, int bus_width) 1098{ 1099 struct ace_device *ace; 1100 int rc; 1101 dev_dbg(dev, "ace_alloc(%p)\n", dev); 1102 1103 if (!physaddr) { 1104 rc = -ENODEV; 1105 goto err_noreg; 1106 } 1107 1108 /* Allocate and initialize the ace device structure */ 1109 ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL); 1110 if (!ace) { 1111 rc = -ENOMEM; 1112 goto err_alloc; 1113 } 1114 1115 ace->dev = dev; 1116 ace->id = id; 1117 ace->physaddr = physaddr; 1118 ace->irq = irq; 1119 ace->bus_width = bus_width; 1120 1121 /* Call the setup code */ 1122 rc = ace_setup(ace); 1123 if (rc) 1124 goto err_setup; 1125 1126 dev_set_drvdata(dev, ace); 1127 return 0; 1128 1129err_setup: 1130 dev_set_drvdata(dev, NULL); 1131 kfree(ace); 1132err_alloc: 1133err_noreg: 1134 dev_err(dev, "could not initialize device, err=%i\n", rc); 1135 return rc; 1136} 1137 1138static void __devexit ace_free(struct device *dev) 1139{ 1140 struct ace_device *ace = dev_get_drvdata(dev); 1141 dev_dbg(dev, "ace_free(%p)\n", dev); 1142 1143 if (ace) { 1144 ace_teardown(ace); 1145 dev_set_drvdata(dev, NULL); 1146 kfree(ace); 1147 } 1148} 1149 1150/* --------------------------------------------------------------------- 1151 * Platform Bus Support 1152 */ 1153 1154static int __devinit ace_probe(struct platform_device *dev) 1155{ 1156 resource_size_t physaddr = 0; 1157 int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */ 1158 int id = dev->id; 1159 int irq = NO_IRQ; 1160 int i; 1161 1162 dev_dbg(&dev->dev, "ace_probe(%p)\n", dev); 1163 1164 for (i = 0; i < dev->num_resources; i++) { 1165 if (dev->resource[i].flags & IORESOURCE_MEM) 1166 physaddr = dev->resource[i].start; 1167 if (dev->resource[i].flags & IORESOURCE_IRQ) 1168 irq = dev->resource[i].start; 1169 } 1170 1171 /* Call the bus-independent setup code */ 1172 return ace_alloc(&dev->dev, id, physaddr, irq, bus_width); 1173} 1174 1175/* 1176 * Platform bus remove() method 1177 */ 1178static int __devexit ace_remove(struct platform_device *dev) 1179{ 1180 ace_free(&dev->dev); 1181 return 0; 1182} 1183 1184static struct platform_driver ace_platform_driver = { 1185 .probe = ace_probe, 1186 .remove = __devexit_p(ace_remove), 1187 .driver = { 1188 .owner = THIS_MODULE, 1189 .name = "xsysace", 1190 }, 1191}; 1192 1193/* --------------------------------------------------------------------- 1194 * OF_Platform Bus Support 1195 */ 1196 1197#if defined(CONFIG_OF) 1198static int __devinit ace_of_probe(struct platform_device *op) 1199{ 1200 struct resource res; 1201 resource_size_t physaddr; 1202 const u32 *id; 1203 int irq, bus_width, rc; 1204 1205 /* device id */ 1206 id = of_get_property(op->dev.of_node, "port-number", NULL); 1207 1208 /* physaddr */ 1209 rc = of_address_to_resource(op->dev.of_node, 0, &res); 1210 if (rc) { 1211 dev_err(&op->dev, "invalid address\n"); 1212 return rc; 1213 } 1214 physaddr = res.start; 1215 1216 /* irq */ 1217 irq = irq_of_parse_and_map(op->dev.of_node, 0); 1218 1219 /* bus width */ 1220 bus_width = ACE_BUS_WIDTH_16; 1221 if (of_find_property(op->dev.of_node, "8-bit", NULL)) 1222 bus_width = ACE_BUS_WIDTH_8; 1223 1224 /* Call the bus-independent setup code */ 1225 return ace_alloc(&op->dev, id ? be32_to_cpup(id) : 0, 1226 physaddr, irq, bus_width); 1227} 1228 1229static int __devexit ace_of_remove(struct platform_device *op) 1230{ 1231 ace_free(&op->dev); 1232 return 0; 1233} 1234 1235/* Match table for of_platform binding */ 1236static const struct of_device_id ace_of_match[] __devinitconst = { 1237 { .compatible = "xlnx,opb-sysace-1.00.b", }, 1238 { .compatible = "xlnx,opb-sysace-1.00.c", }, 1239 { .compatible = "xlnx,xps-sysace-1.00.a", }, 1240 { .compatible = "xlnx,sysace", }, 1241 {}, 1242}; 1243MODULE_DEVICE_TABLE(of, ace_of_match); 1244 1245static struct platform_driver ace_of_driver = { 1246 .probe = ace_of_probe, 1247 .remove = __devexit_p(ace_of_remove), 1248 .driver = { 1249 .name = "xsysace", 1250 .owner = THIS_MODULE, 1251 .of_match_table = ace_of_match, 1252 }, 1253}; 1254 1255/* Registration helpers to keep the number of #ifdefs to a minimum */ 1256static inline int __init ace_of_register(void) 1257{ 1258 pr_debug("xsysace: registering OF binding\n"); 1259 return platform_driver_register(&ace_of_driver); 1260} 1261 1262static inline void __exit ace_of_unregister(void) 1263{ 1264 platform_driver_unregister(&ace_of_driver); 1265} 1266#else /* CONFIG_OF */ 1267/* CONFIG_OF not enabled; do nothing helpers */ 1268static inline int __init ace_of_register(void) { return 0; } 1269static inline void __exit ace_of_unregister(void) { } 1270#endif /* CONFIG_OF */ 1271 1272/* --------------------------------------------------------------------- 1273 * Module init/exit routines 1274 */ 1275static int __init ace_init(void) 1276{ 1277 int rc; 1278 1279 ace_major = register_blkdev(ace_major, "xsysace"); 1280 if (ace_major <= 0) { 1281 rc = -ENOMEM; 1282 goto err_blk; 1283 } 1284 1285 rc = ace_of_register(); 1286 if (rc) 1287 goto err_of; 1288 1289 pr_debug("xsysace: registering platform binding\n"); 1290 rc = platform_driver_register(&ace_platform_driver); 1291 if (rc) 1292 goto err_plat; 1293 1294 pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major); 1295 return 0; 1296 1297err_plat: 1298 ace_of_unregister(); 1299err_of: 1300 unregister_blkdev(ace_major, "xsysace"); 1301err_blk: 1302 printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc); 1303 return rc; 1304} 1305 1306static void __exit ace_exit(void) 1307{ 1308 pr_debug("Unregistering Xilinx SystemACE driver\n"); 1309 platform_driver_unregister(&ace_platform_driver); 1310 ace_of_unregister(); 1311 unregister_blkdev(ace_major, "xsysace"); 1312} 1313 1314module_init(ace_init); 1315module_exit(ace_exit);