Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
at v3.0-rc3 1565 lines 45 kB view raw
1/* 2 * linux/drivers/video/s3fb.c -- Frame buffer device driver for S3 Trio/Virge 3 * 4 * Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org> 5 * 6 * This file is subject to the terms and conditions of the GNU General Public 7 * License. See the file COPYING in the main directory of this archive for 8 * more details. 9 * 10 * Code is based on David Boucher's viafb (http://davesdomain.org.uk/viafb/) 11 * which is based on the code of neofb. 12 */ 13 14#include <linux/module.h> 15#include <linux/kernel.h> 16#include <linux/errno.h> 17#include <linux/string.h> 18#include <linux/mm.h> 19#include <linux/tty.h> 20#include <linux/delay.h> 21#include <linux/fb.h> 22#include <linux/svga.h> 23#include <linux/init.h> 24#include <linux/pci.h> 25#include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */ 26#include <video/vga.h> 27 28#include <linux/i2c.h> 29#include <linux/i2c-algo-bit.h> 30 31#ifdef CONFIG_MTRR 32#include <asm/mtrr.h> 33#endif 34 35struct s3fb_info { 36 int chip, rev, mclk_freq; 37 int mtrr_reg; 38 struct vgastate state; 39 struct mutex open_lock; 40 unsigned int ref_count; 41 u32 pseudo_palette[16]; 42#ifdef CONFIG_FB_S3_DDC 43 u8 __iomem *mmio; 44 bool ddc_registered; 45 struct i2c_adapter ddc_adapter; 46 struct i2c_algo_bit_data ddc_algo; 47#endif 48}; 49 50 51/* ------------------------------------------------------------------------- */ 52 53static const struct svga_fb_format s3fb_formats[] = { 54 { 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, 55 FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16}, 56 { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0, 57 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16}, 58 { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1, 59 FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16}, 60 { 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, 61 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8}, 62 {16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0, 63 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4}, 64 {16, {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, 0, 65 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4}, 66 {24, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, 67 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2}, 68 {32, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, 69 FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2}, 70 SVGA_FORMAT_END 71}; 72 73 74static const struct svga_pll s3_pll = {3, 129, 3, 33, 0, 3, 75 35000, 240000, 14318}; 76static const struct svga_pll s3_trio3d_pll = {3, 129, 3, 31, 0, 4, 77 230000, 460000, 14318}; 78 79static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512}; 80 81static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64", "S3 Trio64V+", 82 "S3 Trio64UV+", "S3 Trio64V2/DX", "S3 Trio64V2/GX", 83 "S3 Plato/PX", "S3 Aurora64V+", "S3 Virge", 84 "S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX", 85 "S3 Virge/GX2", "S3 Virge/GX2+", "", 86 "S3 Trio3D/1X", "S3 Trio3D/2X", "S3 Trio3D/2X", 87 "S3 Trio3D"}; 88 89#define CHIP_UNKNOWN 0x00 90#define CHIP_732_TRIO32 0x01 91#define CHIP_764_TRIO64 0x02 92#define CHIP_765_TRIO64VP 0x03 93#define CHIP_767_TRIO64UVP 0x04 94#define CHIP_775_TRIO64V2_DX 0x05 95#define CHIP_785_TRIO64V2_GX 0x06 96#define CHIP_551_PLATO_PX 0x07 97#define CHIP_M65_AURORA64VP 0x08 98#define CHIP_325_VIRGE 0x09 99#define CHIP_988_VIRGE_VX 0x0A 100#define CHIP_375_VIRGE_DX 0x0B 101#define CHIP_385_VIRGE_GX 0x0C 102#define CHIP_357_VIRGE_GX2 0x0D 103#define CHIP_359_VIRGE_GX2P 0x0E 104#define CHIP_360_TRIO3D_1X 0x10 105#define CHIP_362_TRIO3D_2X 0x11 106#define CHIP_368_TRIO3D_2X 0x12 107#define CHIP_365_TRIO3D 0x13 108 109#define CHIP_XXX_TRIO 0x80 110#define CHIP_XXX_TRIO64V2_DXGX 0x81 111#define CHIP_XXX_VIRGE_DXGX 0x82 112#define CHIP_36X_TRIO3D_1X_2X 0x83 113 114#define CHIP_UNDECIDED_FLAG 0x80 115#define CHIP_MASK 0xFF 116 117#define MMIO_OFFSET 0x1000000 118#define MMIO_SIZE 0x10000 119 120/* CRT timing register sets */ 121 122static const struct vga_regset s3_h_total_regs[] = {{0x00, 0, 7}, {0x5D, 0, 0}, VGA_REGSET_END}; 123static const struct vga_regset s3_h_display_regs[] = {{0x01, 0, 7}, {0x5D, 1, 1}, VGA_REGSET_END}; 124static const struct vga_regset s3_h_blank_start_regs[] = {{0x02, 0, 7}, {0x5D, 2, 2}, VGA_REGSET_END}; 125static const struct vga_regset s3_h_blank_end_regs[] = {{0x03, 0, 4}, {0x05, 7, 7}, VGA_REGSET_END}; 126static const struct vga_regset s3_h_sync_start_regs[] = {{0x04, 0, 7}, {0x5D, 4, 4}, VGA_REGSET_END}; 127static const struct vga_regset s3_h_sync_end_regs[] = {{0x05, 0, 4}, VGA_REGSET_END}; 128 129static const struct vga_regset s3_v_total_regs[] = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x5E, 0, 0}, VGA_REGSET_END}; 130static const struct vga_regset s3_v_display_regs[] = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x5E, 1, 1}, VGA_REGSET_END}; 131static const struct vga_regset s3_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x5E, 2, 2}, VGA_REGSET_END}; 132static const struct vga_regset s3_v_blank_end_regs[] = {{0x16, 0, 7}, VGA_REGSET_END}; 133static const struct vga_regset s3_v_sync_start_regs[] = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x5E, 4, 4}, VGA_REGSET_END}; 134static const struct vga_regset s3_v_sync_end_regs[] = {{0x11, 0, 3}, VGA_REGSET_END}; 135 136static const struct vga_regset s3_line_compare_regs[] = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x5E, 6, 6}, VGA_REGSET_END}; 137static const struct vga_regset s3_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x69, 0, 4}, VGA_REGSET_END}; 138static const struct vga_regset s3_offset_regs[] = {{0x13, 0, 7}, {0x51, 4, 5}, VGA_REGSET_END}; /* set 0x43 bit 2 to 0 */ 139 140static const struct vga_regset s3_dtpc_regs[] = {{0x3B, 0, 7}, {0x5D, 6, 6}, VGA_REGSET_END}; 141 142static const struct svga_timing_regs s3_timing_regs = { 143 s3_h_total_regs, s3_h_display_regs, s3_h_blank_start_regs, 144 s3_h_blank_end_regs, s3_h_sync_start_regs, s3_h_sync_end_regs, 145 s3_v_total_regs, s3_v_display_regs, s3_v_blank_start_regs, 146 s3_v_blank_end_regs, s3_v_sync_start_regs, s3_v_sync_end_regs, 147}; 148 149 150/* ------------------------------------------------------------------------- */ 151 152/* Module parameters */ 153 154 155static char *mode_option __devinitdata; 156 157#ifdef CONFIG_MTRR 158static int mtrr __devinitdata = 1; 159#endif 160 161static int fasttext = 1; 162 163 164MODULE_AUTHOR("(c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>"); 165MODULE_LICENSE("GPL"); 166MODULE_DESCRIPTION("fbdev driver for S3 Trio/Virge"); 167 168module_param(mode_option, charp, 0444); 169MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)"); 170module_param_named(mode, mode_option, charp, 0444); 171MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc) (deprecated)"); 172 173#ifdef CONFIG_MTRR 174module_param(mtrr, int, 0444); 175MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)"); 176#endif 177 178module_param(fasttext, int, 0644); 179MODULE_PARM_DESC(fasttext, "Enable S3 fast text mode (1=enable, 0=disable, default=1)"); 180 181 182/* ------------------------------------------------------------------------- */ 183 184#ifdef CONFIG_FB_S3_DDC 185 186#define DDC_REG 0xaa /* Trio 3D/1X/2X */ 187#define DDC_MMIO_REG 0xff20 /* all other chips */ 188#define DDC_SCL_OUT (1 << 0) 189#define DDC_SDA_OUT (1 << 1) 190#define DDC_SCL_IN (1 << 2) 191#define DDC_SDA_IN (1 << 3) 192#define DDC_DRIVE_EN (1 << 4) 193 194static bool s3fb_ddc_needs_mmio(int chip) 195{ 196 return !(chip == CHIP_360_TRIO3D_1X || 197 chip == CHIP_362_TRIO3D_2X || 198 chip == CHIP_368_TRIO3D_2X); 199} 200 201static u8 s3fb_ddc_read(struct s3fb_info *par) 202{ 203 if (s3fb_ddc_needs_mmio(par->chip)) 204 return readb(par->mmio + DDC_MMIO_REG); 205 else 206 return vga_rcrt(par->state.vgabase, DDC_REG); 207} 208 209static void s3fb_ddc_write(struct s3fb_info *par, u8 val) 210{ 211 if (s3fb_ddc_needs_mmio(par->chip)) 212 writeb(val, par->mmio + DDC_MMIO_REG); 213 else 214 vga_wcrt(par->state.vgabase, DDC_REG, val); 215} 216 217static void s3fb_ddc_setscl(void *data, int val) 218{ 219 struct s3fb_info *par = data; 220 unsigned char reg; 221 222 reg = s3fb_ddc_read(par) | DDC_DRIVE_EN; 223 if (val) 224 reg |= DDC_SCL_OUT; 225 else 226 reg &= ~DDC_SCL_OUT; 227 s3fb_ddc_write(par, reg); 228} 229 230static void s3fb_ddc_setsda(void *data, int val) 231{ 232 struct s3fb_info *par = data; 233 unsigned char reg; 234 235 reg = s3fb_ddc_read(par) | DDC_DRIVE_EN; 236 if (val) 237 reg |= DDC_SDA_OUT; 238 else 239 reg &= ~DDC_SDA_OUT; 240 s3fb_ddc_write(par, reg); 241} 242 243static int s3fb_ddc_getscl(void *data) 244{ 245 struct s3fb_info *par = data; 246 247 return !!(s3fb_ddc_read(par) & DDC_SCL_IN); 248} 249 250static int s3fb_ddc_getsda(void *data) 251{ 252 struct s3fb_info *par = data; 253 254 return !!(s3fb_ddc_read(par) & DDC_SDA_IN); 255} 256 257static int __devinit s3fb_setup_ddc_bus(struct fb_info *info) 258{ 259 struct s3fb_info *par = info->par; 260 261 strlcpy(par->ddc_adapter.name, info->fix.id, 262 sizeof(par->ddc_adapter.name)); 263 par->ddc_adapter.owner = THIS_MODULE; 264 par->ddc_adapter.class = I2C_CLASS_DDC; 265 par->ddc_adapter.algo_data = &par->ddc_algo; 266 par->ddc_adapter.dev.parent = info->device; 267 par->ddc_algo.setsda = s3fb_ddc_setsda; 268 par->ddc_algo.setscl = s3fb_ddc_setscl; 269 par->ddc_algo.getsda = s3fb_ddc_getsda; 270 par->ddc_algo.getscl = s3fb_ddc_getscl; 271 par->ddc_algo.udelay = 10; 272 par->ddc_algo.timeout = 20; 273 par->ddc_algo.data = par; 274 275 i2c_set_adapdata(&par->ddc_adapter, par); 276 277 /* 278 * some Virge cards have external MUX to switch chip I2C bus between 279 * DDC and extension pins - switch it do DDC 280 */ 281/* vga_wseq(par->state.vgabase, 0x08, 0x06); - not needed, already unlocked */ 282 if (par->chip == CHIP_357_VIRGE_GX2 || 283 par->chip == CHIP_359_VIRGE_GX2P) 284 svga_wseq_mask(par->state.vgabase, 0x0d, 0x01, 0x03); 285 else 286 svga_wseq_mask(par->state.vgabase, 0x0d, 0x00, 0x03); 287 /* some Virge need this or the DDC is ignored */ 288 svga_wcrt_mask(par->state.vgabase, 0x5c, 0x03, 0x03); 289 290 return i2c_bit_add_bus(&par->ddc_adapter); 291} 292#endif /* CONFIG_FB_S3_DDC */ 293 294 295/* ------------------------------------------------------------------------- */ 296 297/* Set font in S3 fast text mode */ 298 299static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map) 300{ 301 const u8 *font = map->data; 302 u8 __iomem *fb = (u8 __iomem *) info->screen_base; 303 int i, c; 304 305 if ((map->width != 8) || (map->height != 16) || 306 (map->depth != 1) || (map->length != 256)) { 307 printk(KERN_ERR "fb%d: unsupported font parameters: width %d, height %d, depth %d, length %d\n", 308 info->node, map->width, map->height, map->depth, map->length); 309 return; 310 } 311 312 fb += 2; 313 for (i = 0; i < map->height; i++) { 314 for (c = 0; c < map->length; c++) { 315 fb_writeb(font[c * map->height + i], fb + c * 4); 316 } 317 fb += 1024; 318 } 319} 320 321static void s3fb_tilecursor(struct fb_info *info, struct fb_tilecursor *cursor) 322{ 323 struct s3fb_info *par = info->par; 324 325 svga_tilecursor(par->state.vgabase, info, cursor); 326} 327 328static struct fb_tile_ops s3fb_tile_ops = { 329 .fb_settile = svga_settile, 330 .fb_tilecopy = svga_tilecopy, 331 .fb_tilefill = svga_tilefill, 332 .fb_tileblit = svga_tileblit, 333 .fb_tilecursor = s3fb_tilecursor, 334 .fb_get_tilemax = svga_get_tilemax, 335}; 336 337static struct fb_tile_ops s3fb_fast_tile_ops = { 338 .fb_settile = s3fb_settile_fast, 339 .fb_tilecopy = svga_tilecopy, 340 .fb_tilefill = svga_tilefill, 341 .fb_tileblit = svga_tileblit, 342 .fb_tilecursor = s3fb_tilecursor, 343 .fb_get_tilemax = svga_get_tilemax, 344}; 345 346 347/* ------------------------------------------------------------------------- */ 348 349/* image data is MSB-first, fb structure is MSB-first too */ 350static inline u32 expand_color(u32 c) 351{ 352 return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF; 353} 354 355/* s3fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */ 356static void s3fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image) 357{ 358 u32 fg = expand_color(image->fg_color); 359 u32 bg = expand_color(image->bg_color); 360 const u8 *src1, *src; 361 u8 __iomem *dst1; 362 u32 __iomem *dst; 363 u32 val; 364 int x, y; 365 366 src1 = image->data; 367 dst1 = info->screen_base + (image->dy * info->fix.line_length) 368 + ((image->dx / 8) * 4); 369 370 for (y = 0; y < image->height; y++) { 371 src = src1; 372 dst = (u32 __iomem *) dst1; 373 for (x = 0; x < image->width; x += 8) { 374 val = *(src++) * 0x01010101; 375 val = (val & fg) | (~val & bg); 376 fb_writel(val, dst++); 377 } 378 src1 += image->width / 8; 379 dst1 += info->fix.line_length; 380 } 381 382} 383 384/* s3fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */ 385static void s3fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 386{ 387 u32 fg = expand_color(rect->color); 388 u8 __iomem *dst1; 389 u32 __iomem *dst; 390 int x, y; 391 392 dst1 = info->screen_base + (rect->dy * info->fix.line_length) 393 + ((rect->dx / 8) * 4); 394 395 for (y = 0; y < rect->height; y++) { 396 dst = (u32 __iomem *) dst1; 397 for (x = 0; x < rect->width; x += 8) { 398 fb_writel(fg, dst++); 399 } 400 dst1 += info->fix.line_length; 401 } 402} 403 404 405/* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */ 406static inline u32 expand_pixel(u32 c) 407{ 408 return (((c & 1) << 24) | ((c & 2) << 27) | ((c & 4) << 14) | ((c & 8) << 17) | 409 ((c & 16) << 4) | ((c & 32) << 7) | ((c & 64) >> 6) | ((c & 128) >> 3)) * 0xF; 410} 411 412/* s3fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */ 413static void s3fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image) 414{ 415 u32 fg = image->fg_color * 0x11111111; 416 u32 bg = image->bg_color * 0x11111111; 417 const u8 *src1, *src; 418 u8 __iomem *dst1; 419 u32 __iomem *dst; 420 u32 val; 421 int x, y; 422 423 src1 = image->data; 424 dst1 = info->screen_base + (image->dy * info->fix.line_length) 425 + ((image->dx / 8) * 4); 426 427 for (y = 0; y < image->height; y++) { 428 src = src1; 429 dst = (u32 __iomem *) dst1; 430 for (x = 0; x < image->width; x += 8) { 431 val = expand_pixel(*(src++)); 432 val = (val & fg) | (~val & bg); 433 fb_writel(val, dst++); 434 } 435 src1 += image->width / 8; 436 dst1 += info->fix.line_length; 437 } 438} 439 440static void s3fb_imageblit(struct fb_info *info, const struct fb_image *image) 441{ 442 if ((info->var.bits_per_pixel == 4) && (image->depth == 1) 443 && ((image->width % 8) == 0) && ((image->dx % 8) == 0)) { 444 if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES) 445 s3fb_iplan_imageblit(info, image); 446 else 447 s3fb_cfb4_imageblit(info, image); 448 } else 449 cfb_imageblit(info, image); 450} 451 452static void s3fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 453{ 454 if ((info->var.bits_per_pixel == 4) 455 && ((rect->width % 8) == 0) && ((rect->dx % 8) == 0) 456 && (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)) 457 s3fb_iplan_fillrect(info, rect); 458 else 459 cfb_fillrect(info, rect); 460} 461 462 463 464/* ------------------------------------------------------------------------- */ 465 466 467static void s3_set_pixclock(struct fb_info *info, u32 pixclock) 468{ 469 struct s3fb_info *par = info->par; 470 u16 m, n, r; 471 u8 regval; 472 int rv; 473 474 rv = svga_compute_pll((par->chip == CHIP_365_TRIO3D) ? &s3_trio3d_pll : &s3_pll, 475 1000000000 / pixclock, &m, &n, &r, info->node); 476 if (rv < 0) { 477 printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node); 478 return; 479 } 480 481 /* Set VGA misc register */ 482 regval = vga_r(par->state.vgabase, VGA_MIS_R); 483 vga_w(par->state.vgabase, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD); 484 485 /* Set S3 clock registers */ 486 if (par->chip == CHIP_357_VIRGE_GX2 || 487 par->chip == CHIP_359_VIRGE_GX2P || 488 par->chip == CHIP_360_TRIO3D_1X || 489 par->chip == CHIP_362_TRIO3D_2X || 490 par->chip == CHIP_368_TRIO3D_2X) { 491 vga_wseq(par->state.vgabase, 0x12, (n - 2) | ((r & 3) << 6)); /* n and two bits of r */ 492 vga_wseq(par->state.vgabase, 0x29, r >> 2); /* remaining highest bit of r */ 493 } else 494 vga_wseq(par->state.vgabase, 0x12, (n - 2) | (r << 5)); 495 vga_wseq(par->state.vgabase, 0x13, m - 2); 496 497 udelay(1000); 498 499 /* Activate clock - write 0, 1, 0 to seq/15 bit 5 */ 500 regval = vga_rseq (par->state.vgabase, 0x15); /* | 0x80; */ 501 vga_wseq(par->state.vgabase, 0x15, regval & ~(1<<5)); 502 vga_wseq(par->state.vgabase, 0x15, regval | (1<<5)); 503 vga_wseq(par->state.vgabase, 0x15, regval & ~(1<<5)); 504} 505 506 507/* Open framebuffer */ 508 509static int s3fb_open(struct fb_info *info, int user) 510{ 511 struct s3fb_info *par = info->par; 512 513 mutex_lock(&(par->open_lock)); 514 if (par->ref_count == 0) { 515 void __iomem *vgabase = par->state.vgabase; 516 517 memset(&(par->state), 0, sizeof(struct vgastate)); 518 par->state.vgabase = vgabase; 519 par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP; 520 par->state.num_crtc = 0x70; 521 par->state.num_seq = 0x20; 522 save_vga(&(par->state)); 523 } 524 525 par->ref_count++; 526 mutex_unlock(&(par->open_lock)); 527 528 return 0; 529} 530 531/* Close framebuffer */ 532 533static int s3fb_release(struct fb_info *info, int user) 534{ 535 struct s3fb_info *par = info->par; 536 537 mutex_lock(&(par->open_lock)); 538 if (par->ref_count == 0) { 539 mutex_unlock(&(par->open_lock)); 540 return -EINVAL; 541 } 542 543 if (par->ref_count == 1) 544 restore_vga(&(par->state)); 545 546 par->ref_count--; 547 mutex_unlock(&(par->open_lock)); 548 549 return 0; 550} 551 552/* Validate passed in var */ 553 554static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) 555{ 556 struct s3fb_info *par = info->par; 557 int rv, mem, step; 558 u16 m, n, r; 559 560 /* Find appropriate format */ 561 rv = svga_match_format (s3fb_formats, var, NULL); 562 563 /* 32bpp mode is not supported on VIRGE VX, 564 24bpp is not supported on others */ 565 if ((par->chip == CHIP_988_VIRGE_VX) ? (rv == 7) : (rv == 6)) 566 rv = -EINVAL; 567 568 if (rv < 0) { 569 printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node); 570 return rv; 571 } 572 573 /* Do not allow to have real resoulution larger than virtual */ 574 if (var->xres > var->xres_virtual) 575 var->xres_virtual = var->xres; 576 577 if (var->yres > var->yres_virtual) 578 var->yres_virtual = var->yres; 579 580 /* Round up xres_virtual to have proper alignment of lines */ 581 step = s3fb_formats[rv].xresstep - 1; 582 var->xres_virtual = (var->xres_virtual+step) & ~step; 583 584 /* Check whether have enough memory */ 585 mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual; 586 if (mem > info->screen_size) { 587 printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", 588 info->node, mem >> 10, (unsigned int) (info->screen_size >> 10)); 589 return -EINVAL; 590 } 591 592 rv = svga_check_timings (&s3_timing_regs, var, info->node); 593 if (rv < 0) { 594 printk(KERN_ERR "fb%d: invalid timings requested\n", info->node); 595 return rv; 596 } 597 598 rv = svga_compute_pll(&s3_pll, PICOS2KHZ(var->pixclock), &m, &n, &r, 599 info->node); 600 if (rv < 0) { 601 printk(KERN_ERR "fb%d: invalid pixclock value requested\n", 602 info->node); 603 return rv; 604 } 605 606 return 0; 607} 608 609/* Set video mode from par */ 610 611static int s3fb_set_par(struct fb_info *info) 612{ 613 struct s3fb_info *par = info->par; 614 u32 value, mode, hmul, offset_value, screen_size, multiplex, dbytes; 615 u32 bpp = info->var.bits_per_pixel; 616 u32 htotal, hsstart; 617 618 if (bpp != 0) { 619 info->fix.ypanstep = 1; 620 info->fix.line_length = (info->var.xres_virtual * bpp) / 8; 621 622 info->flags &= ~FBINFO_MISC_TILEBLITTING; 623 info->tileops = NULL; 624 625 /* in 4bpp supports 8p wide tiles only, any tiles otherwise */ 626 info->pixmap.blit_x = (bpp == 4) ? (1 << (8 - 1)) : (~(u32)0); 627 info->pixmap.blit_y = ~(u32)0; 628 629 offset_value = (info->var.xres_virtual * bpp) / 64; 630 screen_size = info->var.yres_virtual * info->fix.line_length; 631 } else { 632 info->fix.ypanstep = 16; 633 info->fix.line_length = 0; 634 635 info->flags |= FBINFO_MISC_TILEBLITTING; 636 info->tileops = fasttext ? &s3fb_fast_tile_ops : &s3fb_tile_ops; 637 638 /* supports 8x16 tiles only */ 639 info->pixmap.blit_x = 1 << (8 - 1); 640 info->pixmap.blit_y = 1 << (16 - 1); 641 642 offset_value = info->var.xres_virtual / 16; 643 screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64; 644 } 645 646 info->var.xoffset = 0; 647 info->var.yoffset = 0; 648 info->var.activate = FB_ACTIVATE_NOW; 649 650 /* Unlock registers */ 651 vga_wcrt(par->state.vgabase, 0x38, 0x48); 652 vga_wcrt(par->state.vgabase, 0x39, 0xA5); 653 vga_wseq(par->state.vgabase, 0x08, 0x06); 654 svga_wcrt_mask(par->state.vgabase, 0x11, 0x00, 0x80); 655 656 /* Blank screen and turn off sync */ 657 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20); 658 svga_wcrt_mask(par->state.vgabase, 0x17, 0x00, 0x80); 659 660 /* Set default values */ 661 svga_set_default_gfx_regs(par->state.vgabase); 662 svga_set_default_atc_regs(par->state.vgabase); 663 svga_set_default_seq_regs(par->state.vgabase); 664 svga_set_default_crt_regs(par->state.vgabase); 665 svga_wcrt_multi(par->state.vgabase, s3_line_compare_regs, 0xFFFFFFFF); 666 svga_wcrt_multi(par->state.vgabase, s3_start_address_regs, 0); 667 668 /* S3 specific initialization */ 669 svga_wcrt_mask(par->state.vgabase, 0x58, 0x10, 0x10); /* enable linear framebuffer */ 670 svga_wcrt_mask(par->state.vgabase, 0x31, 0x08, 0x08); /* enable sequencer access to framebuffer above 256 kB */ 671 672/* svga_wcrt_mask(par->state.vgabase, 0x33, 0x08, 0x08); */ /* DDR ? */ 673/* svga_wcrt_mask(par->state.vgabase, 0x43, 0x01, 0x01); */ /* DDR ? */ 674 svga_wcrt_mask(par->state.vgabase, 0x33, 0x00, 0x08); /* no DDR ? */ 675 svga_wcrt_mask(par->state.vgabase, 0x43, 0x00, 0x01); /* no DDR ? */ 676 677 svga_wcrt_mask(par->state.vgabase, 0x5D, 0x00, 0x28); /* Clear strange HSlen bits */ 678 679/* svga_wcrt_mask(par->state.vgabase, 0x58, 0x03, 0x03); */ 680 681/* svga_wcrt_mask(par->state.vgabase, 0x53, 0x12, 0x13); */ /* enable MMIO */ 682/* svga_wcrt_mask(par->state.vgabase, 0x40, 0x08, 0x08); */ /* enable write buffer */ 683 684 685 /* Set the offset register */ 686 pr_debug("fb%d: offset register : %d\n", info->node, offset_value); 687 svga_wcrt_multi(par->state.vgabase, s3_offset_regs, offset_value); 688 689 if (par->chip != CHIP_357_VIRGE_GX2 && 690 par->chip != CHIP_359_VIRGE_GX2P && 691 par->chip != CHIP_360_TRIO3D_1X && 692 par->chip != CHIP_362_TRIO3D_2X && 693 par->chip != CHIP_368_TRIO3D_2X) { 694 vga_wcrt(par->state.vgabase, 0x54, 0x18); /* M parameter */ 695 vga_wcrt(par->state.vgabase, 0x60, 0xff); /* N parameter */ 696 vga_wcrt(par->state.vgabase, 0x61, 0xff); /* L parameter */ 697 vga_wcrt(par->state.vgabase, 0x62, 0xff); /* L parameter */ 698 } 699 700 vga_wcrt(par->state.vgabase, 0x3A, 0x35); 701 svga_wattr(par->state.vgabase, 0x33, 0x00); 702 703 if (info->var.vmode & FB_VMODE_DOUBLE) 704 svga_wcrt_mask(par->state.vgabase, 0x09, 0x80, 0x80); 705 else 706 svga_wcrt_mask(par->state.vgabase, 0x09, 0x00, 0x80); 707 708 if (info->var.vmode & FB_VMODE_INTERLACED) 709 svga_wcrt_mask(par->state.vgabase, 0x42, 0x20, 0x20); 710 else 711 svga_wcrt_mask(par->state.vgabase, 0x42, 0x00, 0x20); 712 713 /* Disable hardware graphics cursor */ 714 svga_wcrt_mask(par->state.vgabase, 0x45, 0x00, 0x01); 715 /* Disable Streams engine */ 716 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0x0C); 717 718 mode = svga_match_format(s3fb_formats, &(info->var), &(info->fix)); 719 720 /* S3 virge DX hack */ 721 if (par->chip == CHIP_375_VIRGE_DX) { 722 vga_wcrt(par->state.vgabase, 0x86, 0x80); 723 vga_wcrt(par->state.vgabase, 0x90, 0x00); 724 } 725 726 /* S3 virge VX hack */ 727 if (par->chip == CHIP_988_VIRGE_VX) { 728 vga_wcrt(par->state.vgabase, 0x50, 0x00); 729 vga_wcrt(par->state.vgabase, 0x67, 0x50); 730 731 vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09); 732 vga_wcrt(par->state.vgabase, 0x66, 0x90); 733 } 734 735 if (par->chip == CHIP_357_VIRGE_GX2 || 736 par->chip == CHIP_359_VIRGE_GX2P || 737 par->chip == CHIP_360_TRIO3D_1X || 738 par->chip == CHIP_362_TRIO3D_2X || 739 par->chip == CHIP_368_TRIO3D_2X || 740 par->chip == CHIP_365_TRIO3D || 741 par->chip == CHIP_375_VIRGE_DX || 742 par->chip == CHIP_385_VIRGE_GX) { 743 dbytes = info->var.xres * ((bpp+7)/8); 744 vga_wcrt(par->state.vgabase, 0x91, (dbytes + 7) / 8); 745 vga_wcrt(par->state.vgabase, 0x90, (((dbytes + 7) / 8) >> 8) | 0x80); 746 747 vga_wcrt(par->state.vgabase, 0x66, 0x81); 748 } 749 750 if (par->chip == CHIP_357_VIRGE_GX2 || 751 par->chip == CHIP_359_VIRGE_GX2P || 752 par->chip == CHIP_360_TRIO3D_1X || 753 par->chip == CHIP_362_TRIO3D_2X || 754 par->chip == CHIP_368_TRIO3D_2X) 755 vga_wcrt(par->state.vgabase, 0x34, 0x00); 756 else /* enable Data Transfer Position Control (DTPC) */ 757 vga_wcrt(par->state.vgabase, 0x34, 0x10); 758 759 svga_wcrt_mask(par->state.vgabase, 0x31, 0x00, 0x40); 760 multiplex = 0; 761 hmul = 1; 762 763 /* Set mode-specific register values */ 764 switch (mode) { 765 case 0: 766 pr_debug("fb%d: text mode\n", info->node); 767 svga_set_textmode_vga_regs(par->state.vgabase); 768 769 /* Set additional registers like in 8-bit mode */ 770 svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30); 771 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0); 772 773 /* Disable enhanced mode */ 774 svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30); 775 776 if (fasttext) { 777 pr_debug("fb%d: high speed text mode set\n", info->node); 778 svga_wcrt_mask(par->state.vgabase, 0x31, 0x40, 0x40); 779 } 780 break; 781 case 1: 782 pr_debug("fb%d: 4 bit pseudocolor\n", info->node); 783 vga_wgfx(par->state.vgabase, VGA_GFX_MODE, 0x40); 784 785 /* Set additional registers like in 8-bit mode */ 786 svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30); 787 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0); 788 789 /* disable enhanced mode */ 790 svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30); 791 break; 792 case 2: 793 pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node); 794 795 /* Set additional registers like in 8-bit mode */ 796 svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30); 797 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0); 798 799 /* disable enhanced mode */ 800 svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30); 801 break; 802 case 3: 803 pr_debug("fb%d: 8 bit pseudocolor\n", info->node); 804 svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30); 805 if (info->var.pixclock > 20000 || 806 par->chip == CHIP_357_VIRGE_GX2 || 807 par->chip == CHIP_359_VIRGE_GX2P || 808 par->chip == CHIP_360_TRIO3D_1X || 809 par->chip == CHIP_362_TRIO3D_2X || 810 par->chip == CHIP_368_TRIO3D_2X) 811 svga_wcrt_mask(par->state.vgabase, 0x67, 0x00, 0xF0); 812 else { 813 svga_wcrt_mask(par->state.vgabase, 0x67, 0x10, 0xF0); 814 multiplex = 1; 815 } 816 break; 817 case 4: 818 pr_debug("fb%d: 5/5/5 truecolor\n", info->node); 819 if (par->chip == CHIP_988_VIRGE_VX) { 820 if (info->var.pixclock > 20000) 821 svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0); 822 else 823 svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0); 824 } else if (par->chip == CHIP_365_TRIO3D) { 825 svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30); 826 if (info->var.pixclock > 8695) { 827 svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0); 828 hmul = 2; 829 } else { 830 svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0); 831 multiplex = 1; 832 } 833 } else { 834 svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30); 835 svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0); 836 if (par->chip != CHIP_357_VIRGE_GX2 && 837 par->chip != CHIP_359_VIRGE_GX2P && 838 par->chip != CHIP_360_TRIO3D_1X && 839 par->chip != CHIP_362_TRIO3D_2X && 840 par->chip != CHIP_368_TRIO3D_2X) 841 hmul = 2; 842 } 843 break; 844 case 5: 845 pr_debug("fb%d: 5/6/5 truecolor\n", info->node); 846 if (par->chip == CHIP_988_VIRGE_VX) { 847 if (info->var.pixclock > 20000) 848 svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0); 849 else 850 svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0); 851 } else if (par->chip == CHIP_365_TRIO3D) { 852 svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30); 853 if (info->var.pixclock > 8695) { 854 svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0); 855 hmul = 2; 856 } else { 857 svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0); 858 multiplex = 1; 859 } 860 } else { 861 svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30); 862 svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0); 863 if (par->chip != CHIP_357_VIRGE_GX2 && 864 par->chip != CHIP_359_VIRGE_GX2P && 865 par->chip != CHIP_360_TRIO3D_1X && 866 par->chip != CHIP_362_TRIO3D_2X && 867 par->chip != CHIP_368_TRIO3D_2X) 868 hmul = 2; 869 } 870 break; 871 case 6: 872 /* VIRGE VX case */ 873 pr_debug("fb%d: 8/8/8 truecolor\n", info->node); 874 svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0); 875 break; 876 case 7: 877 pr_debug("fb%d: 8/8/8/8 truecolor\n", info->node); 878 svga_wcrt_mask(par->state.vgabase, 0x50, 0x30, 0x30); 879 svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0); 880 break; 881 default: 882 printk(KERN_ERR "fb%d: unsupported mode - bug\n", info->node); 883 return -EINVAL; 884 } 885 886 if (par->chip != CHIP_988_VIRGE_VX) { 887 svga_wseq_mask(par->state.vgabase, 0x15, multiplex ? 0x10 : 0x00, 0x10); 888 svga_wseq_mask(par->state.vgabase, 0x18, multiplex ? 0x80 : 0x00, 0x80); 889 } 890 891 s3_set_pixclock(info, info->var.pixclock); 892 svga_set_timings(par->state.vgabase, &s3_timing_regs, &(info->var), hmul, 1, 893 (info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1, 894 (info->var.vmode & FB_VMODE_INTERLACED) ? 2 : 1, 895 hmul, info->node); 896 897 /* Set interlaced mode start/end register */ 898 htotal = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len; 899 htotal = ((htotal * hmul) / 8) - 5; 900 vga_wcrt(par->state.vgabase, 0x3C, (htotal + 1) / 2); 901 902 /* Set Data Transfer Position */ 903 hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8; 904 value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1); 905 svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value); 906 907 memset_io(info->screen_base, 0x00, screen_size); 908 /* Device and screen back on */ 909 svga_wcrt_mask(par->state.vgabase, 0x17, 0x80, 0x80); 910 svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20); 911 912 return 0; 913} 914 915/* Set a colour register */ 916 917static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, 918 u_int transp, struct fb_info *fb) 919{ 920 switch (fb->var.bits_per_pixel) { 921 case 0: 922 case 4: 923 if (regno >= 16) 924 return -EINVAL; 925 926 if ((fb->var.bits_per_pixel == 4) && 927 (fb->var.nonstd == 0)) { 928 outb(0xF0, VGA_PEL_MSK); 929 outb(regno*16, VGA_PEL_IW); 930 } else { 931 outb(0x0F, VGA_PEL_MSK); 932 outb(regno, VGA_PEL_IW); 933 } 934 outb(red >> 10, VGA_PEL_D); 935 outb(green >> 10, VGA_PEL_D); 936 outb(blue >> 10, VGA_PEL_D); 937 break; 938 case 8: 939 if (regno >= 256) 940 return -EINVAL; 941 942 outb(0xFF, VGA_PEL_MSK); 943 outb(regno, VGA_PEL_IW); 944 outb(red >> 10, VGA_PEL_D); 945 outb(green >> 10, VGA_PEL_D); 946 outb(blue >> 10, VGA_PEL_D); 947 break; 948 case 16: 949 if (regno >= 16) 950 return 0; 951 952 if (fb->var.green.length == 5) 953 ((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) | 954 ((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11); 955 else if (fb->var.green.length == 6) 956 ((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) | 957 ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11); 958 else return -EINVAL; 959 break; 960 case 24: 961 case 32: 962 if (regno >= 16) 963 return 0; 964 965 ((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) | 966 (green & 0xFF00) | ((blue & 0xFF00) >> 8); 967 break; 968 default: 969 return -EINVAL; 970 } 971 972 return 0; 973} 974 975 976/* Set the display blanking state */ 977 978static int s3fb_blank(int blank_mode, struct fb_info *info) 979{ 980 struct s3fb_info *par = info->par; 981 982 switch (blank_mode) { 983 case FB_BLANK_UNBLANK: 984 pr_debug("fb%d: unblank\n", info->node); 985 svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06); 986 svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20); 987 break; 988 case FB_BLANK_NORMAL: 989 pr_debug("fb%d: blank\n", info->node); 990 svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06); 991 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20); 992 break; 993 case FB_BLANK_HSYNC_SUSPEND: 994 pr_debug("fb%d: hsync\n", info->node); 995 svga_wcrt_mask(par->state.vgabase, 0x56, 0x02, 0x06); 996 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20); 997 break; 998 case FB_BLANK_VSYNC_SUSPEND: 999 pr_debug("fb%d: vsync\n", info->node); 1000 svga_wcrt_mask(par->state.vgabase, 0x56, 0x04, 0x06); 1001 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20); 1002 break; 1003 case FB_BLANK_POWERDOWN: 1004 pr_debug("fb%d: sync down\n", info->node); 1005 svga_wcrt_mask(par->state.vgabase, 0x56, 0x06, 0x06); 1006 svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20); 1007 break; 1008 } 1009 1010 return 0; 1011} 1012 1013 1014/* Pan the display */ 1015 1016static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) 1017{ 1018 struct s3fb_info *par = info->par; 1019 unsigned int offset; 1020 1021 /* Calculate the offset */ 1022 if (var->bits_per_pixel == 0) { 1023 offset = (var->yoffset / 16) * (var->xres_virtual / 2) + (var->xoffset / 2); 1024 offset = offset >> 2; 1025 } else { 1026 offset = (var->yoffset * info->fix.line_length) + 1027 (var->xoffset * var->bits_per_pixel / 8); 1028 offset = offset >> 2; 1029 } 1030 1031 /* Set the offset */ 1032 svga_wcrt_multi(par->state.vgabase, s3_start_address_regs, offset); 1033 1034 return 0; 1035} 1036 1037/* ------------------------------------------------------------------------- */ 1038 1039/* Frame buffer operations */ 1040 1041static struct fb_ops s3fb_ops = { 1042 .owner = THIS_MODULE, 1043 .fb_open = s3fb_open, 1044 .fb_release = s3fb_release, 1045 .fb_check_var = s3fb_check_var, 1046 .fb_set_par = s3fb_set_par, 1047 .fb_setcolreg = s3fb_setcolreg, 1048 .fb_blank = s3fb_blank, 1049 .fb_pan_display = s3fb_pan_display, 1050 .fb_fillrect = s3fb_fillrect, 1051 .fb_copyarea = cfb_copyarea, 1052 .fb_imageblit = s3fb_imageblit, 1053 .fb_get_caps = svga_get_caps, 1054}; 1055 1056/* ------------------------------------------------------------------------- */ 1057 1058static int __devinit s3_identification(struct s3fb_info *par) 1059{ 1060 int chip = par->chip; 1061 1062 if (chip == CHIP_XXX_TRIO) { 1063 u8 cr30 = vga_rcrt(par->state.vgabase, 0x30); 1064 u8 cr2e = vga_rcrt(par->state.vgabase, 0x2e); 1065 u8 cr2f = vga_rcrt(par->state.vgabase, 0x2f); 1066 1067 if ((cr30 == 0xE0) || (cr30 == 0xE1)) { 1068 if (cr2e == 0x10) 1069 return CHIP_732_TRIO32; 1070 if (cr2e == 0x11) { 1071 if (! (cr2f & 0x40)) 1072 return CHIP_764_TRIO64; 1073 else 1074 return CHIP_765_TRIO64VP; 1075 } 1076 } 1077 } 1078 1079 if (chip == CHIP_XXX_TRIO64V2_DXGX) { 1080 u8 cr6f = vga_rcrt(par->state.vgabase, 0x6f); 1081 1082 if (! (cr6f & 0x01)) 1083 return CHIP_775_TRIO64V2_DX; 1084 else 1085 return CHIP_785_TRIO64V2_GX; 1086 } 1087 1088 if (chip == CHIP_XXX_VIRGE_DXGX) { 1089 u8 cr6f = vga_rcrt(par->state.vgabase, 0x6f); 1090 1091 if (! (cr6f & 0x01)) 1092 return CHIP_375_VIRGE_DX; 1093 else 1094 return CHIP_385_VIRGE_GX; 1095 } 1096 1097 if (chip == CHIP_36X_TRIO3D_1X_2X) { 1098 switch (vga_rcrt(par->state.vgabase, 0x2f)) { 1099 case 0x00: 1100 return CHIP_360_TRIO3D_1X; 1101 case 0x01: 1102 return CHIP_362_TRIO3D_2X; 1103 case 0x02: 1104 return CHIP_368_TRIO3D_2X; 1105 } 1106 } 1107 1108 return CHIP_UNKNOWN; 1109} 1110 1111 1112/* PCI probe */ 1113 1114static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) 1115{ 1116 struct pci_bus_region bus_reg; 1117 struct resource vga_res; 1118 struct fb_info *info; 1119 struct s3fb_info *par; 1120 int rc; 1121 u8 regval, cr38, cr39; 1122 bool found = false; 1123 1124 /* Ignore secondary VGA device because there is no VGA arbitration */ 1125 if (! svga_primary_device(dev)) { 1126 dev_info(&(dev->dev), "ignoring secondary device\n"); 1127 return -ENODEV; 1128 } 1129 1130 /* Allocate and fill driver data structure */ 1131 info = framebuffer_alloc(sizeof(struct s3fb_info), &(dev->dev)); 1132 if (!info) { 1133 dev_err(&(dev->dev), "cannot allocate memory\n"); 1134 return -ENOMEM; 1135 } 1136 1137 par = info->par; 1138 mutex_init(&par->open_lock); 1139 1140 info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN; 1141 info->fbops = &s3fb_ops; 1142 1143 /* Prepare PCI device */ 1144 rc = pci_enable_device(dev); 1145 if (rc < 0) { 1146 dev_err(info->device, "cannot enable PCI device\n"); 1147 goto err_enable_device; 1148 } 1149 1150 rc = pci_request_regions(dev, "s3fb"); 1151 if (rc < 0) { 1152 dev_err(info->device, "cannot reserve framebuffer region\n"); 1153 goto err_request_regions; 1154 } 1155 1156 1157 info->fix.smem_start = pci_resource_start(dev, 0); 1158 info->fix.smem_len = pci_resource_len(dev, 0); 1159 1160 /* Map physical IO memory address into kernel space */ 1161 info->screen_base = pci_iomap(dev, 0, 0); 1162 if (! info->screen_base) { 1163 rc = -ENOMEM; 1164 dev_err(info->device, "iomap for framebuffer failed\n"); 1165 goto err_iomap; 1166 } 1167 1168 bus_reg.start = 0; 1169 bus_reg.end = 64 * 1024; 1170 1171 vga_res.flags = IORESOURCE_IO; 1172 1173 pcibios_bus_to_resource(dev, &vga_res, &bus_reg); 1174 1175 par->state.vgabase = (void __iomem *) vga_res.start; 1176 1177 /* Unlock regs */ 1178 cr38 = vga_rcrt(par->state.vgabase, 0x38); 1179 cr39 = vga_rcrt(par->state.vgabase, 0x39); 1180 vga_wseq(par->state.vgabase, 0x08, 0x06); 1181 vga_wcrt(par->state.vgabase, 0x38, 0x48); 1182 vga_wcrt(par->state.vgabase, 0x39, 0xA5); 1183 1184 /* Identify chip type */ 1185 par->chip = id->driver_data & CHIP_MASK; 1186 par->rev = vga_rcrt(par->state.vgabase, 0x2f); 1187 if (par->chip & CHIP_UNDECIDED_FLAG) 1188 par->chip = s3_identification(par); 1189 1190 /* Find how many physical memory there is on card */ 1191 /* 0x36 register is accessible even if other registers are locked */ 1192 regval = vga_rcrt(par->state.vgabase, 0x36); 1193 if (par->chip == CHIP_360_TRIO3D_1X || 1194 par->chip == CHIP_362_TRIO3D_2X || 1195 par->chip == CHIP_368_TRIO3D_2X || 1196 par->chip == CHIP_365_TRIO3D) { 1197 switch ((regval & 0xE0) >> 5) { 1198 case 0: /* 8MB -- only 4MB usable for display */ 1199 case 1: /* 4MB with 32-bit bus */ 1200 case 2: /* 4MB */ 1201 info->screen_size = 4 << 20; 1202 break; 1203 case 4: /* 2MB on 365 Trio3D */ 1204 case 6: /* 2MB */ 1205 info->screen_size = 2 << 20; 1206 break; 1207 } 1208 } else if (par->chip == CHIP_357_VIRGE_GX2 || 1209 par->chip == CHIP_359_VIRGE_GX2P) { 1210 switch ((regval & 0xC0) >> 6) { 1211 case 1: /* 4MB */ 1212 info->screen_size = 4 << 20; 1213 break; 1214 case 3: /* 2MB */ 1215 info->screen_size = 2 << 20; 1216 break; 1217 } 1218 } else 1219 info->screen_size = s3_memsizes[regval >> 5] << 10; 1220 info->fix.smem_len = info->screen_size; 1221 1222 /* Find MCLK frequency */ 1223 regval = vga_rseq(par->state.vgabase, 0x10); 1224 par->mclk_freq = ((vga_rseq(par->state.vgabase, 0x11) + 2) * 14318) / ((regval & 0x1F) + 2); 1225 par->mclk_freq = par->mclk_freq >> (regval >> 5); 1226 1227 /* Restore locks */ 1228 vga_wcrt(par->state.vgabase, 0x38, cr38); 1229 vga_wcrt(par->state.vgabase, 0x39, cr39); 1230 1231 strcpy(info->fix.id, s3_names [par->chip]); 1232 info->fix.mmio_start = 0; 1233 info->fix.mmio_len = 0; 1234 info->fix.type = FB_TYPE_PACKED_PIXELS; 1235 info->fix.visual = FB_VISUAL_PSEUDOCOLOR; 1236 info->fix.ypanstep = 0; 1237 info->fix.accel = FB_ACCEL_NONE; 1238 info->pseudo_palette = (void*) (par->pseudo_palette); 1239 info->var.bits_per_pixel = 8; 1240 1241#ifdef CONFIG_FB_S3_DDC 1242 /* Enable MMIO if needed */ 1243 if (s3fb_ddc_needs_mmio(par->chip)) { 1244 par->mmio = ioremap(info->fix.smem_start + MMIO_OFFSET, MMIO_SIZE); 1245 if (par->mmio) 1246 svga_wcrt_mask(par->state.vgabase, 0x53, 0x08, 0x08); /* enable MMIO */ 1247 else 1248 dev_err(info->device, "unable to map MMIO at 0x%lx, disabling DDC", 1249 info->fix.smem_start + MMIO_OFFSET); 1250 } 1251 if (!s3fb_ddc_needs_mmio(par->chip) || par->mmio) 1252 if (s3fb_setup_ddc_bus(info) == 0) { 1253 u8 *edid = fb_ddc_read(&par->ddc_adapter); 1254 par->ddc_registered = true; 1255 if (edid) { 1256 fb_edid_to_monspecs(edid, &info->monspecs); 1257 kfree(edid); 1258 if (!info->monspecs.modedb) 1259 dev_err(info->device, "error getting mode database\n"); 1260 else { 1261 const struct fb_videomode *m; 1262 1263 fb_videomode_to_modelist(info->monspecs.modedb, 1264 info->monspecs.modedb_len, 1265 &info->modelist); 1266 m = fb_find_best_display(&info->monspecs, &info->modelist); 1267 if (m) { 1268 fb_videomode_to_var(&info->var, m); 1269 /* fill all other info->var's fields */ 1270 if (s3fb_check_var(&info->var, info) == 0) 1271 found = true; 1272 } 1273 } 1274 } 1275 } 1276#endif 1277 if (!mode_option && !found) 1278 mode_option = "640x480-8@60"; 1279 1280 /* Prepare startup mode */ 1281 if (mode_option) { 1282 rc = fb_find_mode(&info->var, info, mode_option, 1283 info->monspecs.modedb, info->monspecs.modedb_len, 1284 NULL, info->var.bits_per_pixel); 1285 if (!rc || rc == 4) { 1286 rc = -EINVAL; 1287 dev_err(info->device, "mode %s not found\n", mode_option); 1288 fb_destroy_modedb(info->monspecs.modedb); 1289 info->monspecs.modedb = NULL; 1290 goto err_find_mode; 1291 } 1292 } 1293 1294 fb_destroy_modedb(info->monspecs.modedb); 1295 info->monspecs.modedb = NULL; 1296 1297 /* maximize virtual vertical size for fast scrolling */ 1298 info->var.yres_virtual = info->fix.smem_len * 8 / 1299 (info->var.bits_per_pixel * info->var.xres_virtual); 1300 if (info->var.yres_virtual < info->var.yres) { 1301 dev_err(info->device, "virtual vertical size smaller than real\n"); 1302 goto err_find_mode; 1303 } 1304 1305 /* maximize virtual vertical size for fast scrolling */ 1306 info->var.yres_virtual = info->fix.smem_len * 8 / 1307 (info->var.bits_per_pixel * info->var.xres_virtual); 1308 if (info->var.yres_virtual < info->var.yres) { 1309 dev_err(info->device, "virtual vertical size smaller than real\n"); 1310 goto err_find_mode; 1311 } 1312 1313 rc = fb_alloc_cmap(&info->cmap, 256, 0); 1314 if (rc < 0) { 1315 dev_err(info->device, "cannot allocate colormap\n"); 1316 goto err_alloc_cmap; 1317 } 1318 1319 rc = register_framebuffer(info); 1320 if (rc < 0) { 1321 dev_err(info->device, "cannot register framebuffer\n"); 1322 goto err_reg_fb; 1323 } 1324 1325 printk(KERN_INFO "fb%d: %s on %s, %d MB RAM, %d MHz MCLK\n", info->node, info->fix.id, 1326 pci_name(dev), info->fix.smem_len >> 20, (par->mclk_freq + 500) / 1000); 1327 1328 if (par->chip == CHIP_UNKNOWN) 1329 printk(KERN_INFO "fb%d: unknown chip, CR2D=%x, CR2E=%x, CRT2F=%x, CRT30=%x\n", 1330 info->node, vga_rcrt(par->state.vgabase, 0x2d), vga_rcrt(par->state.vgabase, 0x2e), 1331 vga_rcrt(par->state.vgabase, 0x2f), vga_rcrt(par->state.vgabase, 0x30)); 1332 1333 /* Record a reference to the driver data */ 1334 pci_set_drvdata(dev, info); 1335 1336#ifdef CONFIG_MTRR 1337 if (mtrr) { 1338 par->mtrr_reg = -1; 1339 par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1); 1340 } 1341#endif 1342 1343 return 0; 1344 1345 /* Error handling */ 1346err_reg_fb: 1347 fb_dealloc_cmap(&info->cmap); 1348err_alloc_cmap: 1349err_find_mode: 1350#ifdef CONFIG_FB_S3_DDC 1351 if (par->ddc_registered) 1352 i2c_del_adapter(&par->ddc_adapter); 1353 if (par->mmio) 1354 iounmap(par->mmio); 1355#endif 1356 pci_iounmap(dev, info->screen_base); 1357err_iomap: 1358 pci_release_regions(dev); 1359err_request_regions: 1360/* pci_disable_device(dev); */ 1361err_enable_device: 1362 framebuffer_release(info); 1363 return rc; 1364} 1365 1366 1367/* PCI remove */ 1368 1369static void __devexit s3_pci_remove(struct pci_dev *dev) 1370{ 1371 struct fb_info *info = pci_get_drvdata(dev); 1372 struct s3fb_info __maybe_unused *par = info->par; 1373 1374 if (info) { 1375 1376#ifdef CONFIG_MTRR 1377 if (par->mtrr_reg >= 0) { 1378 mtrr_del(par->mtrr_reg, 0, 0); 1379 par->mtrr_reg = -1; 1380 } 1381#endif 1382 1383 unregister_framebuffer(info); 1384 fb_dealloc_cmap(&info->cmap); 1385 1386#ifdef CONFIG_FB_S3_DDC 1387 if (par->ddc_registered) 1388 i2c_del_adapter(&par->ddc_adapter); 1389 if (par->mmio) 1390 iounmap(par->mmio); 1391#endif 1392 1393 pci_iounmap(dev, info->screen_base); 1394 pci_release_regions(dev); 1395/* pci_disable_device(dev); */ 1396 1397 pci_set_drvdata(dev, NULL); 1398 framebuffer_release(info); 1399 } 1400} 1401 1402/* PCI suspend */ 1403 1404static int s3_pci_suspend(struct pci_dev* dev, pm_message_t state) 1405{ 1406 struct fb_info *info = pci_get_drvdata(dev); 1407 struct s3fb_info *par = info->par; 1408 1409 dev_info(info->device, "suspend\n"); 1410 1411 console_lock(); 1412 mutex_lock(&(par->open_lock)); 1413 1414 if ((state.event == PM_EVENT_FREEZE) || (par->ref_count == 0)) { 1415 mutex_unlock(&(par->open_lock)); 1416 console_unlock(); 1417 return 0; 1418 } 1419 1420 fb_set_suspend(info, 1); 1421 1422 pci_save_state(dev); 1423 pci_disable_device(dev); 1424 pci_set_power_state(dev, pci_choose_state(dev, state)); 1425 1426 mutex_unlock(&(par->open_lock)); 1427 console_unlock(); 1428 1429 return 0; 1430} 1431 1432 1433/* PCI resume */ 1434 1435static int s3_pci_resume(struct pci_dev* dev) 1436{ 1437 struct fb_info *info = pci_get_drvdata(dev); 1438 struct s3fb_info *par = info->par; 1439 int err; 1440 1441 dev_info(info->device, "resume\n"); 1442 1443 console_lock(); 1444 mutex_lock(&(par->open_lock)); 1445 1446 if (par->ref_count == 0) { 1447 mutex_unlock(&(par->open_lock)); 1448 console_unlock(); 1449 return 0; 1450 } 1451 1452 pci_set_power_state(dev, PCI_D0); 1453 pci_restore_state(dev); 1454 err = pci_enable_device(dev); 1455 if (err) { 1456 mutex_unlock(&(par->open_lock)); 1457 console_unlock(); 1458 dev_err(info->device, "error %d enabling device for resume\n", err); 1459 return err; 1460 } 1461 pci_set_master(dev); 1462 1463 s3fb_set_par(info); 1464 fb_set_suspend(info, 0); 1465 1466 mutex_unlock(&(par->open_lock)); 1467 console_unlock(); 1468 1469 return 0; 1470} 1471 1472 1473/* List of boards that we are trying to support */ 1474 1475static struct pci_device_id s3_devices[] __devinitdata = { 1476 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8810), .driver_data = CHIP_XXX_TRIO}, 1477 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8811), .driver_data = CHIP_XXX_TRIO}, 1478 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8812), .driver_data = CHIP_M65_AURORA64VP}, 1479 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8814), .driver_data = CHIP_767_TRIO64UVP}, 1480 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8901), .driver_data = CHIP_XXX_TRIO64V2_DXGX}, 1481 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8902), .driver_data = CHIP_551_PLATO_PX}, 1482 1483 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x5631), .driver_data = CHIP_325_VIRGE}, 1484 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x883D), .driver_data = CHIP_988_VIRGE_VX}, 1485 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A01), .driver_data = CHIP_XXX_VIRGE_DXGX}, 1486 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_357_VIRGE_GX2}, 1487 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_359_VIRGE_GX2P}, 1488 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P}, 1489 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A13), .driver_data = CHIP_36X_TRIO3D_1X_2X}, 1490 {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8904), .driver_data = CHIP_365_TRIO3D}, 1491 1492 {0, 0, 0, 0, 0, 0, 0} 1493}; 1494 1495 1496MODULE_DEVICE_TABLE(pci, s3_devices); 1497 1498static struct pci_driver s3fb_pci_driver = { 1499 .name = "s3fb", 1500 .id_table = s3_devices, 1501 .probe = s3_pci_probe, 1502 .remove = __devexit_p(s3_pci_remove), 1503 .suspend = s3_pci_suspend, 1504 .resume = s3_pci_resume, 1505}; 1506 1507/* Parse user speficied options */ 1508 1509#ifndef MODULE 1510static int __init s3fb_setup(char *options) 1511{ 1512 char *opt; 1513 1514 if (!options || !*options) 1515 return 0; 1516 1517 while ((opt = strsep(&options, ",")) != NULL) { 1518 1519 if (!*opt) 1520 continue; 1521#ifdef CONFIG_MTRR 1522 else if (!strncmp(opt, "mtrr:", 5)) 1523 mtrr = simple_strtoul(opt + 5, NULL, 0); 1524#endif 1525 else if (!strncmp(opt, "fasttext:", 9)) 1526 fasttext = simple_strtoul(opt + 9, NULL, 0); 1527 else 1528 mode_option = opt; 1529 } 1530 1531 return 0; 1532} 1533#endif 1534 1535/* Cleanup */ 1536 1537static void __exit s3fb_cleanup(void) 1538{ 1539 pr_debug("s3fb: cleaning up\n"); 1540 pci_unregister_driver(&s3fb_pci_driver); 1541} 1542 1543/* Driver Initialisation */ 1544 1545static int __init s3fb_init(void) 1546{ 1547 1548#ifndef MODULE 1549 char *option = NULL; 1550 1551 if (fb_get_options("s3fb", &option)) 1552 return -ENODEV; 1553 s3fb_setup(option); 1554#endif 1555 1556 pr_debug("s3fb: initializing\n"); 1557 return pci_register_driver(&s3fb_pci_driver); 1558} 1559 1560/* ------------------------------------------------------------------------- */ 1561 1562/* Modularization */ 1563 1564module_init(s3fb_init); 1565module_exit(s3fb_cleanup);