tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
fork
Configure Feed
Select the types of activity you want to include in your feed.
1/*
2 * R8A66597 driver platform data
3 *
4 * Copyright (C) 2009 Renesas Solutions Corp.
5 *
6 * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; version 2 of the License.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 *
21 */
22
23#ifndef __LINUX_USB_R8A66597_H
24#define __LINUX_USB_R8A66597_H
25
26#define R8A66597_PLATDATA_XTAL_12MHZ 0x01
27#define R8A66597_PLATDATA_XTAL_24MHZ 0x02
28#define R8A66597_PLATDATA_XTAL_48MHZ 0x03
29
30struct r8a66597_platdata {
31 /* This callback can control port power instead of DVSTCTR register. */
32 void (*port_power)(int port, int power);
33
34 /* set one = on chip controller, set zero = external controller */
35 unsigned on_chip:1;
36
37 /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
38 unsigned xtal:2;
39
40 /* set one = 3.3V, set zero = 1.5V */
41 unsigned vif:1;
42
43 /* set one = big endian, set zero = little endian */
44 unsigned endian:1;
45};
46
47/* Register definitions */
48#define SYSCFG0 0x00
49#define SYSCFG1 0x02
50#define SYSSTS0 0x04
51#define SYSSTS1 0x06
52#define DVSTCTR0 0x08
53#define DVSTCTR1 0x0A
54#define TESTMODE 0x0C
55#define PINCFG 0x0E
56#define DMA0CFG 0x10
57#define DMA1CFG 0x12
58#define CFIFO 0x14
59#define D0FIFO 0x18
60#define D1FIFO 0x1C
61#define CFIFOSEL 0x20
62#define CFIFOCTR 0x22
63#define CFIFOSIE 0x24
64#define D0FIFOSEL 0x28
65#define D0FIFOCTR 0x2A
66#define D1FIFOSEL 0x2C
67#define D1FIFOCTR 0x2E
68#define INTENB0 0x30
69#define INTENB1 0x32
70#define INTENB2 0x34
71#define BRDYENB 0x36
72#define NRDYENB 0x38
73#define BEMPENB 0x3A
74#define SOFCFG 0x3C
75#define INTSTS0 0x40
76#define INTSTS1 0x42
77#define INTSTS2 0x44
78#define BRDYSTS 0x46
79#define NRDYSTS 0x48
80#define BEMPSTS 0x4A
81#define FRMNUM 0x4C
82#define UFRMNUM 0x4E
83#define USBADDR 0x50
84#define USBREQ 0x54
85#define USBVAL 0x56
86#define USBINDX 0x58
87#define USBLENG 0x5A
88#define DCPCFG 0x5C
89#define DCPMAXP 0x5E
90#define DCPCTR 0x60
91#define PIPESEL 0x64
92#define PIPECFG 0x68
93#define PIPEBUF 0x6A
94#define PIPEMAXP 0x6C
95#define PIPEPERI 0x6E
96#define PIPE1CTR 0x70
97#define PIPE2CTR 0x72
98#define PIPE3CTR 0x74
99#define PIPE4CTR 0x76
100#define PIPE5CTR 0x78
101#define PIPE6CTR 0x7A
102#define PIPE7CTR 0x7C
103#define PIPE8CTR 0x7E
104#define PIPE9CTR 0x80
105#define PIPE1TRE 0x90
106#define PIPE1TRN 0x92
107#define PIPE2TRE 0x94
108#define PIPE2TRN 0x96
109#define PIPE3TRE 0x98
110#define PIPE3TRN 0x9A
111#define PIPE4TRE 0x9C
112#define PIPE4TRN 0x9E
113#define PIPE5TRE 0xA0
114#define PIPE5TRN 0xA2
115#define DEVADD0 0xD0
116#define DEVADD1 0xD2
117#define DEVADD2 0xD4
118#define DEVADD3 0xD6
119#define DEVADD4 0xD8
120#define DEVADD5 0xDA
121#define DEVADD6 0xDC
122#define DEVADD7 0xDE
123#define DEVADD8 0xE0
124#define DEVADD9 0xE2
125#define DEVADDA 0xE4
126
127/* System Configuration Control Register */
128#define XTAL 0xC000 /* b15-14: Crystal selection */
129#define XTAL48 0x8000 /* 48MHz */
130#define XTAL24 0x4000 /* 24MHz */
131#define XTAL12 0x0000 /* 12MHz */
132#define XCKE 0x2000 /* b13: External clock enable */
133#define PLLC 0x0800 /* b11: PLL control */
134#define SCKE 0x0400 /* b10: USB clock enable */
135#define PCSDIS 0x0200 /* b9: not CS wakeup */
136#define LPSME 0x0100 /* b8: Low power sleep mode */
137#define HSE 0x0080 /* b7: Hi-speed enable */
138#define DCFM 0x0040 /* b6: Controller function select */
139#define DRPD 0x0020 /* b5: D+/- pull down control */
140#define DPRPU 0x0010 /* b4: D+ pull up control */
141#define USBE 0x0001 /* b0: USB module operation enable */
142
143/* System Configuration Status Register */
144#define OVCBIT 0x8000 /* b15-14: Over-current bit */
145#define OVCMON 0xC000 /* b15-14: Over-current monitor */
146#define SOFEA 0x0020 /* b5: SOF monitor */
147#define IDMON 0x0004 /* b3: ID-pin monitor */
148#define LNST 0x0003 /* b1-0: D+, D- line status */
149#define SE1 0x0003 /* SE1 */
150#define FS_KSTS 0x0002 /* Full-Speed K State */
151#define FS_JSTS 0x0001 /* Full-Speed J State */
152#define LS_JSTS 0x0002 /* Low-Speed J State */
153#define LS_KSTS 0x0001 /* Low-Speed K State */
154#define SE0 0x0000 /* SE0 */
155
156/* Device State Control Register */
157#define EXTLP0 0x0400 /* b10: External port */
158#define VBOUT 0x0200 /* b9: VBUS output */
159#define WKUP 0x0100 /* b8: Remote wakeup */
160#define RWUPE 0x0080 /* b7: Remote wakeup sense */
161#define USBRST 0x0040 /* b6: USB reset enable */
162#define RESUME 0x0020 /* b5: Resume enable */
163#define UACT 0x0010 /* b4: USB bus enable */
164#define RHST 0x0007 /* b1-0: Reset handshake status */
165#define HSPROC 0x0004 /* HS handshake is processing */
166#define HSMODE 0x0003 /* Hi-Speed mode */
167#define FSMODE 0x0002 /* Full-Speed mode */
168#define LSMODE 0x0001 /* Low-Speed mode */
169#define UNDECID 0x0000 /* Undecided */
170
171/* Test Mode Register */
172#define UTST 0x000F /* b3-0: Test select */
173#define H_TST_PACKET 0x000C /* HOST TEST Packet */
174#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */
175#define H_TST_K 0x000A /* HOST TEST K */
176#define H_TST_J 0x0009 /* HOST TEST J */
177#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */
178#define P_TST_PACKET 0x0004 /* PERI TEST Packet */
179#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */
180#define P_TST_K 0x0002 /* PERI TEST K */
181#define P_TST_J 0x0001 /* PERI TEST J */
182#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */
183
184/* Data Pin Configuration Register */
185#define LDRV 0x8000 /* b15: Drive Current Adjust */
186#define VIF1 0x0000 /* VIF = 1.8V */
187#define VIF3 0x8000 /* VIF = 3.3V */
188#define INTA 0x0001 /* b1: USB INT-pin active */
189
190/* DMAx Pin Configuration Register */
191#define DREQA 0x4000 /* b14: Dreq active select */
192#define BURST 0x2000 /* b13: Burst mode */
193#define DACKA 0x0400 /* b10: Dack active select */
194#define DFORM 0x0380 /* b9-7: DMA mode select */
195#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */
196#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */
197#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */
198#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */
199#define DENDA 0x0040 /* b6: Dend active select */
200#define PKTM 0x0020 /* b5: Packet mode */
201#define DENDE 0x0010 /* b4: Dend enable */
202#define OBUS 0x0004 /* b2: OUTbus mode */
203
204/* CFIFO/DxFIFO Port Select Register */
205#define RCNT 0x8000 /* b15: Read count mode */
206#define REW 0x4000 /* b14: Buffer rewind */
207#define DCLRM 0x2000 /* b13: DMA buffer clear mode */
208#define DREQE 0x1000 /* b12: DREQ output enable */
209#define MBW_8 0x0000 /* 8bit */
210#define MBW_16 0x0400 /* 16bit */
211#define MBW_32 0x0800 /* 32bit */
212#define BIGEND 0x0100 /* b8: Big endian mode */
213#define BYTE_LITTLE 0x0000 /* little dendian */
214#define BYTE_BIG 0x0100 /* big endifan */
215#define ISEL 0x0020 /* b5: DCP FIFO port direction select */
216#define CURPIPE 0x000F /* b2-0: PIPE select */
217
218/* CFIFO/DxFIFO Port Control Register */
219#define BVAL 0x8000 /* b15: Buffer valid flag */
220#define BCLR 0x4000 /* b14: Buffer clear */
221#define FRDY 0x2000 /* b13: FIFO ready */
222#define DTLN 0x0FFF /* b11-0: FIFO received data length */
223
224/* Interrupt Enable Register 0 */
225#define VBSE 0x8000 /* b15: VBUS interrupt */
226#define RSME 0x4000 /* b14: Resume interrupt */
227#define SOFE 0x2000 /* b13: Frame update interrupt */
228#define DVSE 0x1000 /* b12: Device state transition interrupt */
229#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
230#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
231#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
232#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
233
234/* Interrupt Enable Register 1 */
235#define OVRCRE 0x8000 /* b15: Over-current interrupt */
236#define BCHGE 0x4000 /* b14: USB us chenge interrupt */
237#define DTCHE 0x1000 /* b12: Detach sense interrupt */
238#define ATTCHE 0x0800 /* b11: Attach sense interrupt */
239#define EOFERRE 0x0040 /* b6: EOF error interrupt */
240#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */
241#define SACKE 0x0010 /* b4: SETUP ACK interrupt */
242
243/* BRDY Interrupt Enable/Status Register */
244#define BRDY9 0x0200 /* b9: PIPE9 */
245#define BRDY8 0x0100 /* b8: PIPE8 */
246#define BRDY7 0x0080 /* b7: PIPE7 */
247#define BRDY6 0x0040 /* b6: PIPE6 */
248#define BRDY5 0x0020 /* b5: PIPE5 */
249#define BRDY4 0x0010 /* b4: PIPE4 */
250#define BRDY3 0x0008 /* b3: PIPE3 */
251#define BRDY2 0x0004 /* b2: PIPE2 */
252#define BRDY1 0x0002 /* b1: PIPE1 */
253#define BRDY0 0x0001 /* b1: PIPE0 */
254
255/* NRDY Interrupt Enable/Status Register */
256#define NRDY9 0x0200 /* b9: PIPE9 */
257#define NRDY8 0x0100 /* b8: PIPE8 */
258#define NRDY7 0x0080 /* b7: PIPE7 */
259#define NRDY6 0x0040 /* b6: PIPE6 */
260#define NRDY5 0x0020 /* b5: PIPE5 */
261#define NRDY4 0x0010 /* b4: PIPE4 */
262#define NRDY3 0x0008 /* b3: PIPE3 */
263#define NRDY2 0x0004 /* b2: PIPE2 */
264#define NRDY1 0x0002 /* b1: PIPE1 */
265#define NRDY0 0x0001 /* b1: PIPE0 */
266
267/* BEMP Interrupt Enable/Status Register */
268#define BEMP9 0x0200 /* b9: PIPE9 */
269#define BEMP8 0x0100 /* b8: PIPE8 */
270#define BEMP7 0x0080 /* b7: PIPE7 */
271#define BEMP6 0x0040 /* b6: PIPE6 */
272#define BEMP5 0x0020 /* b5: PIPE5 */
273#define BEMP4 0x0010 /* b4: PIPE4 */
274#define BEMP3 0x0008 /* b3: PIPE3 */
275#define BEMP2 0x0004 /* b2: PIPE2 */
276#define BEMP1 0x0002 /* b1: PIPE1 */
277#define BEMP0 0x0001 /* b0: PIPE0 */
278
279/* SOF Pin Configuration Register */
280#define TRNENSEL 0x0100 /* b8: Select transaction enable period */
281#define BRDYM 0x0040 /* b6: BRDY clear timing */
282#define INTL 0x0020 /* b5: Interrupt sense select */
283#define EDGESTS 0x0010 /* b4: */
284#define SOFMODE 0x000C /* b3-2: SOF pin select */
285#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */
286#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */
287#define SOF_DISABLE 0x0000 /* SOF OUT Disable */
288
289/* Interrupt Status Register 0 */
290#define VBINT 0x8000 /* b15: VBUS interrupt */
291#define RESM 0x4000 /* b14: Resume interrupt */
292#define SOFR 0x2000 /* b13: SOF frame update interrupt */
293#define DVST 0x1000 /* b12: Device state transition interrupt */
294#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
295#define BEMP 0x0400 /* b10: Buffer empty interrupt */
296#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
297#define BRDY 0x0100 /* b8: Buffer ready interrupt */
298#define VBSTS 0x0080 /* b7: VBUS input port */
299#define DVSQ 0x0070 /* b6-4: Device state */
300#define DS_SPD_CNFG 0x0070 /* Suspend Configured */
301#define DS_SPD_ADDR 0x0060 /* Suspend Address */
302#define DS_SPD_DFLT 0x0050 /* Suspend Default */
303#define DS_SPD_POWR 0x0040 /* Suspend Powered */
304#define DS_SUSP 0x0040 /* Suspend */
305#define DS_CNFG 0x0030 /* Configured */
306#define DS_ADDS 0x0020 /* Address */
307#define DS_DFLT 0x0010 /* Default */
308#define DS_POWR 0x0000 /* Powered */
309#define DVSQS 0x0030 /* b5-4: Device state */
310#define VALID 0x0008 /* b3: Setup packet detected flag */
311#define CTSQ 0x0007 /* b2-0: Control transfer stage */
312#define CS_SQER 0x0006 /* Sequence error */
313#define CS_WRND 0x0005 /* Control write nodata status stage */
314#define CS_WRSS 0x0004 /* Control write status stage */
315#define CS_WRDS 0x0003 /* Control write data stage */
316#define CS_RDSS 0x0002 /* Control read status stage */
317#define CS_RDDS 0x0001 /* Control read data stage */
318#define CS_IDST 0x0000 /* Idle or setup stage */
319
320/* Interrupt Status Register 1 */
321#define OVRCR 0x8000 /* b15: Over-current interrupt */
322#define BCHG 0x4000 /* b14: USB bus chenge interrupt */
323#define DTCH 0x1000 /* b12: Detach sense interrupt */
324#define ATTCH 0x0800 /* b11: Attach sense interrupt */
325#define EOFERR 0x0040 /* b6: EOF-error interrupt */
326#define SIGN 0x0020 /* b5: Setup ignore interrupt */
327#define SACK 0x0010 /* b4: Setup acknowledge interrupt */
328
329/* Frame Number Register */
330#define OVRN 0x8000 /* b15: Overrun error */
331#define CRCE 0x4000 /* b14: Received data error */
332#define FRNM 0x07FF /* b10-0: Frame number */
333
334/* Micro Frame Number Register */
335#define UFRNM 0x0007 /* b2-0: Micro frame number */
336
337/* Default Control Pipe Maxpacket Size Register */
338/* Pipe Maxpacket Size Register */
339#define DEVSEL 0xF000 /* b15-14: Device address select */
340#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
341
342/* Default Control Pipe Control Register */
343#define BSTS 0x8000 /* b15: Buffer status */
344#define SUREQ 0x4000 /* b14: Send USB request */
345#define CSCLR 0x2000 /* b13: complete-split status clear */
346#define CSSTS 0x1000 /* b12: complete-split status */
347#define SUREQCLR 0x0800 /* b11: stop setup request */
348#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
349#define SQSET 0x0080 /* b7: Sequence toggle bit set */
350#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
351#define PBUSY 0x0020 /* b5: pipe busy */
352#define PINGE 0x0010 /* b4: ping enable */
353#define CCPL 0x0004 /* b2: Enable control transfer complete */
354#define PID 0x0003 /* b1-0: Response PID */
355#define PID_STALL11 0x0003 /* STALL */
356#define PID_STALL 0x0002 /* STALL */
357#define PID_BUF 0x0001 /* BUF */
358#define PID_NAK 0x0000 /* NAK */
359
360/* Pipe Window Select Register */
361#define PIPENM 0x0007 /* b2-0: Pipe select */
362
363/* Pipe Configuration Register */
364#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */
365#define R8A66597_ISO 0xC000 /* Isochronous */
366#define R8A66597_INT 0x8000 /* Interrupt */
367#define R8A66597_BULK 0x4000 /* Bulk */
368#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */
369#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */
370#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */
371#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */
372#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */
373#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */
374
375/* Pipe Buffer Configuration Register */
376#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */
377#define BUFNMB 0x007F /* b6-0: Pipe buffer number */
378#define PIPE0BUF 256
379#define PIPExBUF 64
380
381/* Pipe Maxpacket Size Register */
382#define MXPS 0x07FF /* b10-0: Maxpacket size */
383
384/* Pipe Cycle Configuration Register */
385#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
386#define IITV 0x0007 /* b2-0: Isochronous interval */
387
388/* Pipex Control Register */
389#define BSTS 0x8000 /* b15: Buffer status */
390#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
391#define CSCLR 0x2000 /* b13: complete-split status clear */
392#define CSSTS 0x1000 /* b12: complete-split status */
393#define ATREPM 0x0400 /* b10: Auto repeat mode */
394#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
395#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
396#define SQSET 0x0080 /* b7: Sequence toggle bit set */
397#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
398#define PBUSY 0x0020 /* b5: pipe busy */
399#define PID 0x0003 /* b1-0: Response PID */
400
401/* PIPExTRE */
402#define TRENB 0x0200 /* b9: Transaction counter enable */
403#define TRCLR 0x0100 /* b8: Transaction counter clear */
404
405/* PIPExTRN */
406#define TRNCNT 0xFFFF /* b15-0: Transaction counter */
407
408/* DEVADDx */
409#define UPPHUB 0x7800
410#define HUBPORT 0x0700
411#define USBSPD 0x00C0
412#define RTPORT 0x0001
413
414#endif /* __LINUX_USB_R8A66597_H */
415