Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v2.6.39 601 lines 16 kB view raw
1/* 2 * (C) Copyright David Brownell 2000-2002 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms of the GNU General Public License as published by the 6 * Free Software Foundation; either version 2 of the License, or (at your 7 * option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, but 10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software Foundation, 16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 17 */ 18 19#include <linux/kernel.h> 20#include <linux/module.h> 21#include <linux/pci.h> 22#include <linux/usb.h> 23#include <linux/usb/hcd.h> 24 25#include <asm/io.h> 26#include <asm/irq.h> 27 28#ifdef CONFIG_PPC_PMAC 29#include <asm/machdep.h> 30#include <asm/pmac_feature.h> 31#include <asm/pci-bridge.h> 32#include <asm/prom.h> 33#endif 34 35#include "usb.h" 36 37 38/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ 39 40#ifdef CONFIG_PM_SLEEP 41 42/* Coordinate handoffs between EHCI and companion controllers 43 * during system resume 44 */ 45 46static DEFINE_MUTEX(companions_mutex); 47 48#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI 49#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI 50#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI 51 52enum companion_action { 53 SET_HS_COMPANION, CLEAR_HS_COMPANION, WAIT_FOR_COMPANIONS 54}; 55 56static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd, 57 enum companion_action action) 58{ 59 struct pci_dev *companion; 60 struct usb_hcd *companion_hcd; 61 unsigned int slot = PCI_SLOT(pdev->devfn); 62 63 /* Iterate through other PCI functions in the same slot. 64 * If pdev is OHCI or UHCI then we are looking for EHCI, and 65 * vice versa. 66 */ 67 companion = NULL; 68 for_each_pci_dev(companion) { 69 if (companion->bus != pdev->bus || 70 PCI_SLOT(companion->devfn) != slot) 71 continue; 72 73 companion_hcd = pci_get_drvdata(companion); 74 if (!companion_hcd) 75 continue; 76 77 /* For SET_HS_COMPANION, store a pointer to the EHCI bus in 78 * the OHCI/UHCI companion bus structure. 79 * For CLEAR_HS_COMPANION, clear the pointer to the EHCI bus 80 * in the OHCI/UHCI companion bus structure. 81 * For WAIT_FOR_COMPANIONS, wait until the OHCI/UHCI 82 * companion controllers have fully resumed. 83 */ 84 85 if ((pdev->class == CL_OHCI || pdev->class == CL_UHCI) && 86 companion->class == CL_EHCI) { 87 /* action must be SET_HS_COMPANION */ 88 dev_dbg(&companion->dev, "HS companion for %s\n", 89 dev_name(&pdev->dev)); 90 hcd->self.hs_companion = &companion_hcd->self; 91 92 } else if (pdev->class == CL_EHCI && 93 (companion->class == CL_OHCI || 94 companion->class == CL_UHCI)) { 95 switch (action) { 96 case SET_HS_COMPANION: 97 dev_dbg(&pdev->dev, "HS companion for %s\n", 98 dev_name(&companion->dev)); 99 companion_hcd->self.hs_companion = &hcd->self; 100 break; 101 case CLEAR_HS_COMPANION: 102 companion_hcd->self.hs_companion = NULL; 103 break; 104 case WAIT_FOR_COMPANIONS: 105 device_pm_wait_for_dev(&pdev->dev, 106 &companion->dev); 107 break; 108 } 109 } 110 } 111} 112 113static void set_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) 114{ 115 mutex_lock(&companions_mutex); 116 dev_set_drvdata(&pdev->dev, hcd); 117 companion_common(pdev, hcd, SET_HS_COMPANION); 118 mutex_unlock(&companions_mutex); 119} 120 121static void clear_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) 122{ 123 mutex_lock(&companions_mutex); 124 dev_set_drvdata(&pdev->dev, NULL); 125 126 /* If pdev is OHCI or UHCI, just clear its hs_companion pointer */ 127 if (pdev->class == CL_OHCI || pdev->class == CL_UHCI) 128 hcd->self.hs_companion = NULL; 129 130 /* Otherwise search for companion buses and clear their pointers */ 131 else 132 companion_common(pdev, hcd, CLEAR_HS_COMPANION); 133 mutex_unlock(&companions_mutex); 134} 135 136static void wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd) 137{ 138 /* Only EHCI controllers need to wait. 139 * No locking is needed because a controller cannot be resumed 140 * while one of its companions is getting unbound. 141 */ 142 if (pdev->class == CL_EHCI) 143 companion_common(pdev, hcd, WAIT_FOR_COMPANIONS); 144} 145 146#else /* !CONFIG_PM_SLEEP */ 147 148static inline void set_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} 149static inline void clear_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} 150static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {} 151 152#endif /* !CONFIG_PM_SLEEP */ 153 154/*-------------------------------------------------------------------------*/ 155 156/* configure so an HC device and id are always provided */ 157/* always called with process context; sleeping is OK */ 158 159/** 160 * usb_hcd_pci_probe - initialize PCI-based HCDs 161 * @dev: USB Host Controller being probed 162 * @id: pci hotplug id connecting controller to HCD framework 163 * Context: !in_interrupt() 164 * 165 * Allocates basic PCI resources for this USB host controller, and 166 * then invokes the start() method for the HCD associated with it 167 * through the hotplug entry's driver_data. 168 * 169 * Store this function in the HCD's struct pci_driver as probe(). 170 */ 171int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) 172{ 173 struct hc_driver *driver; 174 struct usb_hcd *hcd; 175 int retval; 176 177 if (usb_disabled()) 178 return -ENODEV; 179 180 if (!id) 181 return -EINVAL; 182 driver = (struct hc_driver *)id->driver_data; 183 if (!driver) 184 return -EINVAL; 185 186 if (pci_enable_device(dev) < 0) 187 return -ENODEV; 188 dev->current_state = PCI_D0; 189 190 if (!dev->irq) { 191 dev_err(&dev->dev, 192 "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", 193 pci_name(dev)); 194 retval = -ENODEV; 195 goto disable_pci; 196 } 197 198 hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev)); 199 if (!hcd) { 200 retval = -ENOMEM; 201 goto disable_pci; 202 } 203 204 if (driver->flags & HCD_MEMORY) { 205 /* EHCI, OHCI */ 206 hcd->rsrc_start = pci_resource_start(dev, 0); 207 hcd->rsrc_len = pci_resource_len(dev, 0); 208 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, 209 driver->description)) { 210 dev_dbg(&dev->dev, "controller already in use\n"); 211 retval = -EBUSY; 212 goto clear_companion; 213 } 214 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); 215 if (hcd->regs == NULL) { 216 dev_dbg(&dev->dev, "error mapping memory\n"); 217 retval = -EFAULT; 218 goto release_mem_region; 219 } 220 221 } else { 222 /* UHCI */ 223 int region; 224 225 for (region = 0; region < PCI_ROM_RESOURCE; region++) { 226 if (!(pci_resource_flags(dev, region) & 227 IORESOURCE_IO)) 228 continue; 229 230 hcd->rsrc_start = pci_resource_start(dev, region); 231 hcd->rsrc_len = pci_resource_len(dev, region); 232 if (request_region(hcd->rsrc_start, hcd->rsrc_len, 233 driver->description)) 234 break; 235 } 236 if (region == PCI_ROM_RESOURCE) { 237 dev_dbg(&dev->dev, "no i/o regions available\n"); 238 retval = -EBUSY; 239 goto clear_companion; 240 } 241 } 242 243 pci_set_master(dev); 244 245 retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); 246 if (retval != 0) 247 goto unmap_registers; 248 set_hs_companion(dev, hcd); 249 250 if (pci_dev_run_wake(dev)) 251 pm_runtime_put_noidle(&dev->dev); 252 return retval; 253 254unmap_registers: 255 if (driver->flags & HCD_MEMORY) { 256 iounmap(hcd->regs); 257release_mem_region: 258 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 259 } else 260 release_region(hcd->rsrc_start, hcd->rsrc_len); 261clear_companion: 262 clear_hs_companion(dev, hcd); 263 usb_put_hcd(hcd); 264disable_pci: 265 pci_disable_device(dev); 266 dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval); 267 return retval; 268} 269EXPORT_SYMBOL_GPL(usb_hcd_pci_probe); 270 271 272/* may be called without controller electrically present */ 273/* may be called with controller, bus, and devices active */ 274 275/** 276 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs 277 * @dev: USB Host Controller being removed 278 * Context: !in_interrupt() 279 * 280 * Reverses the effect of usb_hcd_pci_probe(), first invoking 281 * the HCD's stop() method. It is always called from a thread 282 * context, normally "rmmod", "apmd", or something similar. 283 * 284 * Store this function in the HCD's struct pci_driver as remove(). 285 */ 286void usb_hcd_pci_remove(struct pci_dev *dev) 287{ 288 struct usb_hcd *hcd; 289 290 hcd = pci_get_drvdata(dev); 291 if (!hcd) 292 return; 293 294 if (pci_dev_run_wake(dev)) 295 pm_runtime_get_noresume(&dev->dev); 296 297 /* Fake an interrupt request in order to give the driver a chance 298 * to test whether the controller hardware has been removed (e.g., 299 * cardbus physical eject). 300 */ 301 local_irq_disable(); 302 usb_hcd_irq(0, hcd); 303 local_irq_enable(); 304 305 usb_remove_hcd(hcd); 306 if (hcd->driver->flags & HCD_MEMORY) { 307 iounmap(hcd->regs); 308 release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 309 } else { 310 release_region(hcd->rsrc_start, hcd->rsrc_len); 311 } 312 clear_hs_companion(dev, hcd); 313 usb_put_hcd(hcd); 314 pci_disable_device(dev); 315} 316EXPORT_SYMBOL_GPL(usb_hcd_pci_remove); 317 318/** 319 * usb_hcd_pci_shutdown - shutdown host controller 320 * @dev: USB Host Controller being shutdown 321 */ 322void usb_hcd_pci_shutdown(struct pci_dev *dev) 323{ 324 struct usb_hcd *hcd; 325 326 hcd = pci_get_drvdata(dev); 327 if (!hcd) 328 return; 329 330 if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && 331 hcd->driver->shutdown) { 332 hcd->driver->shutdown(hcd); 333 pci_disable_device(dev); 334 } 335} 336EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); 337 338#ifdef CONFIG_PM 339 340#ifdef CONFIG_PPC_PMAC 341static void powermac_set_asic(struct pci_dev *pci_dev, int enable) 342{ 343 /* Enanble or disable ASIC clocks for USB */ 344 if (machine_is(powermac)) { 345 struct device_node *of_node; 346 347 of_node = pci_device_to_OF_node(pci_dev); 348 if (of_node) 349 pmac_call_feature(PMAC_FTR_USB_ENABLE, 350 of_node, 0, enable); 351 } 352} 353 354#else 355 356static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable) 357{} 358 359#endif /* CONFIG_PPC_PMAC */ 360 361static int check_root_hub_suspended(struct device *dev) 362{ 363 struct pci_dev *pci_dev = to_pci_dev(dev); 364 struct usb_hcd *hcd = pci_get_drvdata(pci_dev); 365 366 if (HCD_RH_RUNNING(hcd)) { 367 dev_warn(dev, "Root hub is not suspended\n"); 368 return -EBUSY; 369 } 370 if (hcd->shared_hcd) { 371 hcd = hcd->shared_hcd; 372 if (HCD_RH_RUNNING(hcd)) { 373 dev_warn(dev, "Secondary root hub is not suspended\n"); 374 return -EBUSY; 375 } 376 } 377 return 0; 378} 379 380static int suspend_common(struct device *dev, bool do_wakeup) 381{ 382 struct pci_dev *pci_dev = to_pci_dev(dev); 383 struct usb_hcd *hcd = pci_get_drvdata(pci_dev); 384 int retval; 385 386 /* Root hub suspend should have stopped all downstream traffic, 387 * and all bus master traffic. And done so for both the interface 388 * and the stub usb_device (which we check here). But maybe it 389 * didn't; writing sysfs power/state files ignores such rules... 390 */ 391 retval = check_root_hub_suspended(dev); 392 if (retval) 393 return retval; 394 395 if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) { 396 /* Optimization: Don't suspend if a root-hub wakeup is 397 * pending and it would cause the HCD to wake up anyway. 398 */ 399 if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) 400 return -EBUSY; 401 if (do_wakeup && hcd->shared_hcd && 402 HCD_WAKEUP_PENDING(hcd->shared_hcd)) 403 return -EBUSY; 404 retval = hcd->driver->pci_suspend(hcd, do_wakeup); 405 suspend_report_result(hcd->driver->pci_suspend, retval); 406 407 /* Check again in case wakeup raced with pci_suspend */ 408 if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) || 409 (retval == 0 && do_wakeup && hcd->shared_hcd && 410 HCD_WAKEUP_PENDING(hcd->shared_hcd))) { 411 if (hcd->driver->pci_resume) 412 hcd->driver->pci_resume(hcd, false); 413 retval = -EBUSY; 414 } 415 if (retval) 416 return retval; 417 } 418 419 /* If MSI-X is enabled, the driver will have synchronized all vectors 420 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be 421 * synchronized here. 422 */ 423 if (!hcd->msix_enabled) 424 synchronize_irq(pci_dev->irq); 425 426 /* Downstream ports from this root hub should already be quiesced, so 427 * there will be no DMA activity. Now we can shut down the upstream 428 * link (except maybe for PME# resume signaling). We'll enter a 429 * low power state during suspend_noirq, if the hardware allows. 430 */ 431 pci_disable_device(pci_dev); 432 return retval; 433} 434 435static int resume_common(struct device *dev, int event) 436{ 437 struct pci_dev *pci_dev = to_pci_dev(dev); 438 struct usb_hcd *hcd = pci_get_drvdata(pci_dev); 439 int retval; 440 441 if (HCD_RH_RUNNING(hcd) || 442 (hcd->shared_hcd && 443 HCD_RH_RUNNING(hcd->shared_hcd))) { 444 dev_dbg(dev, "can't resume, not suspended!\n"); 445 return 0; 446 } 447 448 retval = pci_enable_device(pci_dev); 449 if (retval < 0) { 450 dev_err(dev, "can't re-enable after resume, %d!\n", retval); 451 return retval; 452 } 453 454 pci_set_master(pci_dev); 455 456 clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); 457 if (hcd->shared_hcd) 458 clear_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags); 459 460 if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) { 461 if (event != PM_EVENT_AUTO_RESUME) 462 wait_for_companions(pci_dev, hcd); 463 464 retval = hcd->driver->pci_resume(hcd, 465 event == PM_EVENT_RESTORE); 466 if (retval) { 467 dev_err(dev, "PCI post-resume error %d!\n", retval); 468 if (hcd->shared_hcd) 469 usb_hc_died(hcd->shared_hcd); 470 usb_hc_died(hcd); 471 } 472 } 473 return retval; 474} 475 476#ifdef CONFIG_PM_SLEEP 477 478static int hcd_pci_suspend(struct device *dev) 479{ 480 return suspend_common(dev, device_may_wakeup(dev)); 481} 482 483static int hcd_pci_suspend_noirq(struct device *dev) 484{ 485 struct pci_dev *pci_dev = to_pci_dev(dev); 486 struct usb_hcd *hcd = pci_get_drvdata(pci_dev); 487 int retval; 488 489 retval = check_root_hub_suspended(dev); 490 if (retval) 491 return retval; 492 493 pci_save_state(pci_dev); 494 495 /* If the root hub is dead rather than suspended, disallow remote 496 * wakeup. usb_hc_died() should ensure that both hosts are marked as 497 * dying, so we only need to check the primary roothub. 498 */ 499 if (HCD_DEAD(hcd)) 500 device_set_wakeup_enable(dev, 0); 501 dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev)); 502 503 /* Possibly enable remote wakeup, 504 * choose the appropriate low-power state, and go to that state. 505 */ 506 retval = pci_prepare_to_sleep(pci_dev); 507 if (retval == -EIO) { /* Low-power not supported */ 508 dev_dbg(dev, "--> PCI D0 legacy\n"); 509 retval = 0; 510 } else if (retval == 0) { 511 dev_dbg(dev, "--> PCI %s\n", 512 pci_power_name(pci_dev->current_state)); 513 } else { 514 suspend_report_result(pci_prepare_to_sleep, retval); 515 return retval; 516 } 517 518 powermac_set_asic(pci_dev, 0); 519 return retval; 520} 521 522static int hcd_pci_resume_noirq(struct device *dev) 523{ 524 struct pci_dev *pci_dev = to_pci_dev(dev); 525 526 powermac_set_asic(pci_dev, 1); 527 528 /* Go back to D0 and disable remote wakeup */ 529 pci_back_from_sleep(pci_dev); 530 return 0; 531} 532 533static int hcd_pci_resume(struct device *dev) 534{ 535 return resume_common(dev, PM_EVENT_RESUME); 536} 537 538static int hcd_pci_restore(struct device *dev) 539{ 540 return resume_common(dev, PM_EVENT_RESTORE); 541} 542 543#else 544 545#define hcd_pci_suspend NULL 546#define hcd_pci_suspend_noirq NULL 547#define hcd_pci_resume_noirq NULL 548#define hcd_pci_resume NULL 549#define hcd_pci_restore NULL 550 551#endif /* CONFIG_PM_SLEEP */ 552 553#ifdef CONFIG_PM_RUNTIME 554 555static int hcd_pci_runtime_suspend(struct device *dev) 556{ 557 int retval; 558 559 retval = suspend_common(dev, true); 560 if (retval == 0) 561 powermac_set_asic(to_pci_dev(dev), 0); 562 dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval); 563 return retval; 564} 565 566static int hcd_pci_runtime_resume(struct device *dev) 567{ 568 int retval; 569 570 powermac_set_asic(to_pci_dev(dev), 1); 571 retval = resume_common(dev, PM_EVENT_AUTO_RESUME); 572 dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval); 573 return retval; 574} 575 576#else 577 578#define hcd_pci_runtime_suspend NULL 579#define hcd_pci_runtime_resume NULL 580 581#endif /* CONFIG_PM_RUNTIME */ 582 583const struct dev_pm_ops usb_hcd_pci_pm_ops = { 584 .suspend = hcd_pci_suspend, 585 .suspend_noirq = hcd_pci_suspend_noirq, 586 .resume_noirq = hcd_pci_resume_noirq, 587 .resume = hcd_pci_resume, 588 .freeze = check_root_hub_suspended, 589 .freeze_noirq = check_root_hub_suspended, 590 .thaw_noirq = NULL, 591 .thaw = NULL, 592 .poweroff = hcd_pci_suspend, 593 .poweroff_noirq = hcd_pci_suspend_noirq, 594 .restore_noirq = hcd_pci_resume_noirq, 595 .restore = hcd_pci_restore, 596 .runtime_suspend = hcd_pci_runtime_suspend, 597 .runtime_resume = hcd_pci_runtime_resume, 598}; 599EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops); 600 601#endif /* CONFIG_PM */