tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * Copyright 2008 Cavium Networks
3 *
4 * This file is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License, Version 2, as
6 * published by the Free Software Foundation.
7 */
8
9#include <linux/platform_device.h>
10#include <linux/atomic.h>
11#include <mach/cns3xxx.h>
12#include <mach/pm.h>
13
14static int cns3xxx_ehci_init(struct usb_hcd *hcd)
15{
16 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
17 int retval;
18
19 /*
20 * EHCI and OHCI share the same clock and power,
21 * resetting twice would cause the 1st controller been reset.
22 * Therefore only do power up at the first up device, and
23 * power down at the last down device.
24 *
25 * Set USB AHB INCR length to 16
26 */
27 if (atomic_inc_return(&usb_pwr_ref) == 1) {
28 cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
29 cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
30 cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
31 __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
32 MISC_CHIP_CONFIG_REG);
33 }
34
35 ehci->caps = hcd->regs;
36 ehci->regs = hcd->regs
37 + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
38 ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
39
40 hcd->has_tt = 0;
41 ehci_reset(ehci);
42
43 retval = ehci_init(hcd);
44 if (retval)
45 return retval;
46
47 ehci_port_power(ehci, 0);
48
49 return retval;
50}
51
52static const struct hc_driver cns3xxx_ehci_hc_driver = {
53 .description = hcd_name,
54 .product_desc = "CNS3XXX EHCI Host Controller",
55 .hcd_priv_size = sizeof(struct ehci_hcd),
56 .irq = ehci_irq,
57 .flags = HCD_MEMORY | HCD_USB2,
58 .reset = cns3xxx_ehci_init,
59 .start = ehci_run,
60 .stop = ehci_stop,
61 .shutdown = ehci_shutdown,
62 .urb_enqueue = ehci_urb_enqueue,
63 .urb_dequeue = ehci_urb_dequeue,
64 .endpoint_disable = ehci_endpoint_disable,
65 .endpoint_reset = ehci_endpoint_reset,
66 .get_frame_number = ehci_get_frame,
67 .hub_status_data = ehci_hub_status_data,
68 .hub_control = ehci_hub_control,
69#ifdef CONFIG_PM
70 .bus_suspend = ehci_bus_suspend,
71 .bus_resume = ehci_bus_resume,
72#endif
73 .relinquish_port = ehci_relinquish_port,
74 .port_handed_over = ehci_port_handed_over,
75
76 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
77};
78
79static int cns3xxx_ehci_probe(struct platform_device *pdev)
80{
81 struct device *dev = &pdev->dev;
82 struct usb_hcd *hcd;
83 const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
84 struct resource *res;
85 int irq;
86 int retval;
87
88 if (usb_disabled())
89 return -ENODEV;
90
91 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
92 if (!res) {
93 dev_err(dev, "Found HC with no IRQ.\n");
94 return -ENODEV;
95 }
96 irq = res->start;
97
98 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
99 if (!hcd)
100 return -ENOMEM;
101
102 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
103 if (!res) {
104 dev_err(dev, "Found HC with no register addr.\n");
105 retval = -ENODEV;
106 goto err1;
107 }
108
109 hcd->rsrc_start = res->start;
110 hcd->rsrc_len = res->end - res->start + 1;
111
112 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
113 driver->description)) {
114 dev_dbg(dev, "controller already in use\n");
115 retval = -EBUSY;
116 goto err1;
117 }
118
119 hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
120 if (hcd->regs == NULL) {
121 dev_dbg(dev, "error mapping memory\n");
122 retval = -EFAULT;
123 goto err2;
124 }
125
126 retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
127 if (retval == 0)
128 return retval;
129
130 iounmap(hcd->regs);
131err2:
132 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
133err1:
134 usb_put_hcd(hcd);
135
136 return retval;
137}
138
139static int cns3xxx_ehci_remove(struct platform_device *pdev)
140{
141 struct usb_hcd *hcd = platform_get_drvdata(pdev);
142
143 usb_remove_hcd(hcd);
144 iounmap(hcd->regs);
145 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
146
147 /*
148 * EHCI and OHCI share the same clock and power,
149 * resetting twice would cause the 1st controller been reset.
150 * Therefore only do power up at the first up device, and
151 * power down at the last down device.
152 */
153 if (atomic_dec_return(&usb_pwr_ref) == 0)
154 cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
155
156 usb_put_hcd(hcd);
157
158 platform_set_drvdata(pdev, NULL);
159
160 return 0;
161}
162
163MODULE_ALIAS("platform:cns3xxx-ehci");
164
165static struct platform_driver cns3xxx_ehci_driver = {
166 .probe = cns3xxx_ehci_probe,
167 .remove = cns3xxx_ehci_remove,
168 .driver = {
169 .name = "cns3xxx-ehci",
170 },
171};