Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v2.6.38-rc2 514 lines 15 kB view raw
1/* 2 * drivers/base/power/sysfs.c - sysfs entries for device PM 3 */ 4 5#include <linux/device.h> 6#include <linux/string.h> 7#include <linux/pm_runtime.h> 8#include <asm/atomic.h> 9#include <linux/jiffies.h> 10#include "power.h" 11 12/* 13 * control - Report/change current runtime PM setting of the device 14 * 15 * Runtime power management of a device can be blocked with the help of 16 * this attribute. All devices have one of the following two values for 17 * the power/control file: 18 * 19 * + "auto\n" to allow the device to be power managed at run time; 20 * + "on\n" to prevent the device from being power managed at run time; 21 * 22 * The default for all devices is "auto", which means that devices may be 23 * subject to automatic power management, depending on their drivers. 24 * Changing this attribute to "on" prevents the driver from power managing 25 * the device at run time. Doing that while the device is suspended causes 26 * it to be woken up. 27 * 28 * wakeup - Report/change current wakeup option for device 29 * 30 * Some devices support "wakeup" events, which are hardware signals 31 * used to activate devices from suspended or low power states. Such 32 * devices have one of three values for the sysfs power/wakeup file: 33 * 34 * + "enabled\n" to issue the events; 35 * + "disabled\n" not to do so; or 36 * + "\n" for temporary or permanent inability to issue wakeup. 37 * 38 * (For example, unconfigured USB devices can't issue wakeups.) 39 * 40 * Familiar examples of devices that can issue wakeup events include 41 * keyboards and mice (both PS2 and USB styles), power buttons, modems, 42 * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events 43 * will wake the entire system from a suspend state; others may just 44 * wake up the device (if the system as a whole is already active). 45 * Some wakeup events use normal IRQ lines; other use special out 46 * of band signaling. 47 * 48 * It is the responsibility of device drivers to enable (or disable) 49 * wakeup signaling as part of changing device power states, respecting 50 * the policy choices provided through the driver model. 51 * 52 * Devices may not be able to generate wakeup events from all power 53 * states. Also, the events may be ignored in some configurations; 54 * for example, they might need help from other devices that aren't 55 * active, or which may have wakeup disabled. Some drivers rely on 56 * wakeup events internally (unless they are disabled), keeping 57 * their hardware in low power modes whenever they're unused. This 58 * saves runtime power, without requiring system-wide sleep states. 59 * 60 * async - Report/change current async suspend setting for the device 61 * 62 * Asynchronous suspend and resume of the device during system-wide power 63 * state transitions can be enabled by writing "enabled" to this file. 64 * Analogously, if "disabled" is written to this file, the device will be 65 * suspended and resumed synchronously. 66 * 67 * All devices have one of the following two values for power/async: 68 * 69 * + "enabled\n" to permit the asynchronous suspend/resume of the device; 70 * + "disabled\n" to forbid it; 71 * 72 * NOTE: It generally is unsafe to permit the asynchronous suspend/resume 73 * of a device unless it is certain that all of the PM dependencies of the 74 * device are known to the PM core. However, for some devices this 75 * attribute is set to "enabled" by bus type code or device drivers and in 76 * that cases it should be safe to leave the default value. 77 * 78 * autosuspend_delay_ms - Report/change a device's autosuspend_delay value 79 * 80 * Some drivers don't want to carry out a runtime suspend as soon as a 81 * device becomes idle; they want it always to remain idle for some period 82 * of time before suspending it. This period is the autosuspend_delay 83 * value (expressed in milliseconds) and it can be controlled by the user. 84 * If the value is negative then the device will never be runtime 85 * suspended. 86 * 87 * NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay 88 * value are used only if the driver calls pm_runtime_use_autosuspend(). 89 * 90 * wakeup_count - Report the number of wakeup events related to the device 91 */ 92 93static const char enabled[] = "enabled"; 94static const char disabled[] = "disabled"; 95 96const char power_group_name[] = "power"; 97EXPORT_SYMBOL_GPL(power_group_name); 98 99#ifdef CONFIG_PM_RUNTIME 100static const char ctrl_auto[] = "auto"; 101static const char ctrl_on[] = "on"; 102 103static ssize_t control_show(struct device *dev, struct device_attribute *attr, 104 char *buf) 105{ 106 return sprintf(buf, "%s\n", 107 dev->power.runtime_auto ? ctrl_auto : ctrl_on); 108} 109 110static ssize_t control_store(struct device * dev, struct device_attribute *attr, 111 const char * buf, size_t n) 112{ 113 char *cp; 114 int len = n; 115 116 cp = memchr(buf, '\n', n); 117 if (cp) 118 len = cp - buf; 119 if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0) 120 pm_runtime_allow(dev); 121 else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0) 122 pm_runtime_forbid(dev); 123 else 124 return -EINVAL; 125 return n; 126} 127 128static DEVICE_ATTR(control, 0644, control_show, control_store); 129 130static ssize_t rtpm_active_time_show(struct device *dev, 131 struct device_attribute *attr, char *buf) 132{ 133 int ret; 134 spin_lock_irq(&dev->power.lock); 135 update_pm_runtime_accounting(dev); 136 ret = sprintf(buf, "%i\n", jiffies_to_msecs(dev->power.active_jiffies)); 137 spin_unlock_irq(&dev->power.lock); 138 return ret; 139} 140 141static DEVICE_ATTR(runtime_active_time, 0444, rtpm_active_time_show, NULL); 142 143static ssize_t rtpm_suspended_time_show(struct device *dev, 144 struct device_attribute *attr, char *buf) 145{ 146 int ret; 147 spin_lock_irq(&dev->power.lock); 148 update_pm_runtime_accounting(dev); 149 ret = sprintf(buf, "%i\n", 150 jiffies_to_msecs(dev->power.suspended_jiffies)); 151 spin_unlock_irq(&dev->power.lock); 152 return ret; 153} 154 155static DEVICE_ATTR(runtime_suspended_time, 0444, rtpm_suspended_time_show, NULL); 156 157static ssize_t rtpm_status_show(struct device *dev, 158 struct device_attribute *attr, char *buf) 159{ 160 const char *p; 161 162 if (dev->power.runtime_error) { 163 p = "error\n"; 164 } else if (dev->power.disable_depth) { 165 p = "unsupported\n"; 166 } else { 167 switch (dev->power.runtime_status) { 168 case RPM_SUSPENDED: 169 p = "suspended\n"; 170 break; 171 case RPM_SUSPENDING: 172 p = "suspending\n"; 173 break; 174 case RPM_RESUMING: 175 p = "resuming\n"; 176 break; 177 case RPM_ACTIVE: 178 p = "active\n"; 179 break; 180 default: 181 return -EIO; 182 } 183 } 184 return sprintf(buf, p); 185} 186 187static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL); 188 189static ssize_t autosuspend_delay_ms_show(struct device *dev, 190 struct device_attribute *attr, char *buf) 191{ 192 if (!dev->power.use_autosuspend) 193 return -EIO; 194 return sprintf(buf, "%d\n", dev->power.autosuspend_delay); 195} 196 197static ssize_t autosuspend_delay_ms_store(struct device *dev, 198 struct device_attribute *attr, const char *buf, size_t n) 199{ 200 long delay; 201 202 if (!dev->power.use_autosuspend) 203 return -EIO; 204 205 if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay) 206 return -EINVAL; 207 208 pm_runtime_set_autosuspend_delay(dev, delay); 209 return n; 210} 211 212static DEVICE_ATTR(autosuspend_delay_ms, 0644, autosuspend_delay_ms_show, 213 autosuspend_delay_ms_store); 214 215#endif 216 217static ssize_t 218wake_show(struct device * dev, struct device_attribute *attr, char * buf) 219{ 220 return sprintf(buf, "%s\n", device_can_wakeup(dev) 221 ? (device_may_wakeup(dev) ? enabled : disabled) 222 : ""); 223} 224 225static ssize_t 226wake_store(struct device * dev, struct device_attribute *attr, 227 const char * buf, size_t n) 228{ 229 char *cp; 230 int len = n; 231 232 if (!device_can_wakeup(dev)) 233 return -EINVAL; 234 235 cp = memchr(buf, '\n', n); 236 if (cp) 237 len = cp - buf; 238 if (len == sizeof enabled - 1 239 && strncmp(buf, enabled, sizeof enabled - 1) == 0) 240 device_set_wakeup_enable(dev, 1); 241 else if (len == sizeof disabled - 1 242 && strncmp(buf, disabled, sizeof disabled - 1) == 0) 243 device_set_wakeup_enable(dev, 0); 244 else 245 return -EINVAL; 246 return n; 247} 248 249static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store); 250 251#ifdef CONFIG_PM_SLEEP 252static ssize_t wakeup_count_show(struct device *dev, 253 struct device_attribute *attr, char *buf) 254{ 255 unsigned long count = 0; 256 bool enabled = false; 257 258 spin_lock_irq(&dev->power.lock); 259 if (dev->power.wakeup) { 260 count = dev->power.wakeup->event_count; 261 enabled = true; 262 } 263 spin_unlock_irq(&dev->power.lock); 264 return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); 265} 266 267static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL); 268 269static ssize_t wakeup_active_count_show(struct device *dev, 270 struct device_attribute *attr, char *buf) 271{ 272 unsigned long count = 0; 273 bool enabled = false; 274 275 spin_lock_irq(&dev->power.lock); 276 if (dev->power.wakeup) { 277 count = dev->power.wakeup->active_count; 278 enabled = true; 279 } 280 spin_unlock_irq(&dev->power.lock); 281 return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); 282} 283 284static DEVICE_ATTR(wakeup_active_count, 0444, wakeup_active_count_show, NULL); 285 286static ssize_t wakeup_hit_count_show(struct device *dev, 287 struct device_attribute *attr, char *buf) 288{ 289 unsigned long count = 0; 290 bool enabled = false; 291 292 spin_lock_irq(&dev->power.lock); 293 if (dev->power.wakeup) { 294 count = dev->power.wakeup->hit_count; 295 enabled = true; 296 } 297 spin_unlock_irq(&dev->power.lock); 298 return enabled ? sprintf(buf, "%lu\n", count) : sprintf(buf, "\n"); 299} 300 301static DEVICE_ATTR(wakeup_hit_count, 0444, wakeup_hit_count_show, NULL); 302 303static ssize_t wakeup_active_show(struct device *dev, 304 struct device_attribute *attr, char *buf) 305{ 306 unsigned int active = 0; 307 bool enabled = false; 308 309 spin_lock_irq(&dev->power.lock); 310 if (dev->power.wakeup) { 311 active = dev->power.wakeup->active; 312 enabled = true; 313 } 314 spin_unlock_irq(&dev->power.lock); 315 return enabled ? sprintf(buf, "%u\n", active) : sprintf(buf, "\n"); 316} 317 318static DEVICE_ATTR(wakeup_active, 0444, wakeup_active_show, NULL); 319 320static ssize_t wakeup_total_time_show(struct device *dev, 321 struct device_attribute *attr, char *buf) 322{ 323 s64 msec = 0; 324 bool enabled = false; 325 326 spin_lock_irq(&dev->power.lock); 327 if (dev->power.wakeup) { 328 msec = ktime_to_ms(dev->power.wakeup->total_time); 329 enabled = true; 330 } 331 spin_unlock_irq(&dev->power.lock); 332 return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); 333} 334 335static DEVICE_ATTR(wakeup_total_time_ms, 0444, wakeup_total_time_show, NULL); 336 337static ssize_t wakeup_max_time_show(struct device *dev, 338 struct device_attribute *attr, char *buf) 339{ 340 s64 msec = 0; 341 bool enabled = false; 342 343 spin_lock_irq(&dev->power.lock); 344 if (dev->power.wakeup) { 345 msec = ktime_to_ms(dev->power.wakeup->max_time); 346 enabled = true; 347 } 348 spin_unlock_irq(&dev->power.lock); 349 return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); 350} 351 352static DEVICE_ATTR(wakeup_max_time_ms, 0444, wakeup_max_time_show, NULL); 353 354static ssize_t wakeup_last_time_show(struct device *dev, 355 struct device_attribute *attr, char *buf) 356{ 357 s64 msec = 0; 358 bool enabled = false; 359 360 spin_lock_irq(&dev->power.lock); 361 if (dev->power.wakeup) { 362 msec = ktime_to_ms(dev->power.wakeup->last_time); 363 enabled = true; 364 } 365 spin_unlock_irq(&dev->power.lock); 366 return enabled ? sprintf(buf, "%lld\n", msec) : sprintf(buf, "\n"); 367} 368 369static DEVICE_ATTR(wakeup_last_time_ms, 0444, wakeup_last_time_show, NULL); 370#endif /* CONFIG_PM_SLEEP */ 371 372#ifdef CONFIG_PM_ADVANCED_DEBUG 373#ifdef CONFIG_PM_RUNTIME 374 375static ssize_t rtpm_usagecount_show(struct device *dev, 376 struct device_attribute *attr, char *buf) 377{ 378 return sprintf(buf, "%d\n", atomic_read(&dev->power.usage_count)); 379} 380 381static ssize_t rtpm_children_show(struct device *dev, 382 struct device_attribute *attr, char *buf) 383{ 384 return sprintf(buf, "%d\n", dev->power.ignore_children ? 385 0 : atomic_read(&dev->power.child_count)); 386} 387 388static ssize_t rtpm_enabled_show(struct device *dev, 389 struct device_attribute *attr, char *buf) 390{ 391 if ((dev->power.disable_depth) && (dev->power.runtime_auto == false)) 392 return sprintf(buf, "disabled & forbidden\n"); 393 else if (dev->power.disable_depth) 394 return sprintf(buf, "disabled\n"); 395 else if (dev->power.runtime_auto == false) 396 return sprintf(buf, "forbidden\n"); 397 return sprintf(buf, "enabled\n"); 398} 399 400static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL); 401static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL); 402static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL); 403 404#endif 405 406static ssize_t async_show(struct device *dev, struct device_attribute *attr, 407 char *buf) 408{ 409 return sprintf(buf, "%s\n", 410 device_async_suspend_enabled(dev) ? enabled : disabled); 411} 412 413static ssize_t async_store(struct device *dev, struct device_attribute *attr, 414 const char *buf, size_t n) 415{ 416 char *cp; 417 int len = n; 418 419 cp = memchr(buf, '\n', n); 420 if (cp) 421 len = cp - buf; 422 if (len == sizeof enabled - 1 && strncmp(buf, enabled, len) == 0) 423 device_enable_async_suspend(dev); 424 else if (len == sizeof disabled - 1 && strncmp(buf, disabled, len) == 0) 425 device_disable_async_suspend(dev); 426 else 427 return -EINVAL; 428 return n; 429} 430 431static DEVICE_ATTR(async, 0644, async_show, async_store); 432#endif /* CONFIG_PM_ADVANCED_DEBUG */ 433 434static struct attribute * power_attrs[] = { 435 &dev_attr_wakeup.attr, 436#ifdef CONFIG_PM_SLEEP 437 &dev_attr_wakeup_count.attr, 438 &dev_attr_wakeup_active_count.attr, 439 &dev_attr_wakeup_hit_count.attr, 440 &dev_attr_wakeup_active.attr, 441 &dev_attr_wakeup_total_time_ms.attr, 442 &dev_attr_wakeup_max_time_ms.attr, 443 &dev_attr_wakeup_last_time_ms.attr, 444#endif 445#ifdef CONFIG_PM_ADVANCED_DEBUG 446 &dev_attr_async.attr, 447#ifdef CONFIG_PM_RUNTIME 448 &dev_attr_runtime_status.attr, 449 &dev_attr_runtime_usage.attr, 450 &dev_attr_runtime_active_kids.attr, 451 &dev_attr_runtime_enabled.attr, 452#endif 453#endif 454 NULL, 455}; 456static struct attribute_group pm_attr_group = { 457 .name = power_group_name, 458 .attrs = power_attrs, 459}; 460 461#ifdef CONFIG_PM_RUNTIME 462 463static struct attribute *runtime_attrs[] = { 464#ifndef CONFIG_PM_ADVANCED_DEBUG 465 &dev_attr_runtime_status.attr, 466#endif 467 &dev_attr_control.attr, 468 &dev_attr_runtime_suspended_time.attr, 469 &dev_attr_runtime_active_time.attr, 470 &dev_attr_autosuspend_delay_ms.attr, 471 NULL, 472}; 473static struct attribute_group pm_runtime_attr_group = { 474 .name = power_group_name, 475 .attrs = runtime_attrs, 476}; 477 478int dpm_sysfs_add(struct device *dev) 479{ 480 int rc; 481 482 rc = sysfs_create_group(&dev->kobj, &pm_attr_group); 483 if (rc == 0 && !dev->power.no_callbacks) { 484 rc = sysfs_merge_group(&dev->kobj, &pm_runtime_attr_group); 485 if (rc) 486 sysfs_remove_group(&dev->kobj, &pm_attr_group); 487 } 488 return rc; 489} 490 491void rpm_sysfs_remove(struct device *dev) 492{ 493 sysfs_unmerge_group(&dev->kobj, &pm_runtime_attr_group); 494} 495 496void dpm_sysfs_remove(struct device *dev) 497{ 498 rpm_sysfs_remove(dev); 499 sysfs_remove_group(&dev->kobj, &pm_attr_group); 500} 501 502#else /* CONFIG_PM_RUNTIME */ 503 504int dpm_sysfs_add(struct device * dev) 505{ 506 return sysfs_create_group(&dev->kobj, &pm_attr_group); 507} 508 509void dpm_sysfs_remove(struct device * dev) 510{ 511 sysfs_remove_group(&dev->kobj, &pm_attr_group); 512} 513 514#endif