at v2.6.37-rc7 278 lines 7.2 kB view raw
1/* 2 * net/tipc/core.c: TIPC module code 3 * 4 * Copyright (c) 2003-2006, Ericsson AB 5 * Copyright (c) 2005-2006, Wind River Systems 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the names of the copyright holders nor the names of its 17 * contributors may be used to endorse or promote products derived from 18 * this software without specific prior written permission. 19 * 20 * Alternatively, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") version 2 as published by the Free 22 * Software Foundation. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 34 * POSSIBILITY OF SUCH DAMAGE. 35 */ 36 37#include <linux/init.h> 38#include <linux/module.h> 39#include <linux/kernel.h> 40#include <linux/random.h> 41 42#include "core.h" 43#include "dbg.h" 44#include "ref.h" 45#include "net.h" 46#include "user_reg.h" 47#include "name_table.h" 48#include "subscr.h" 49#include "config.h" 50 51 52#ifndef CONFIG_TIPC_ZONES 53#define CONFIG_TIPC_ZONES 3 54#endif 55 56#ifndef CONFIG_TIPC_CLUSTERS 57#define CONFIG_TIPC_CLUSTERS 1 58#endif 59 60#ifndef CONFIG_TIPC_NODES 61#define CONFIG_TIPC_NODES 255 62#endif 63 64#ifndef CONFIG_TIPC_SLAVE_NODES 65#define CONFIG_TIPC_SLAVE_NODES 0 66#endif 67 68#ifndef CONFIG_TIPC_PORTS 69#define CONFIG_TIPC_PORTS 8191 70#endif 71 72#ifndef CONFIG_TIPC_LOG 73#define CONFIG_TIPC_LOG 0 74#endif 75 76/* global variables used by multiple sub-systems within TIPC */ 77 78int tipc_mode = TIPC_NOT_RUNNING; 79int tipc_random; 80atomic_t tipc_user_count = ATOMIC_INIT(0); 81 82const char tipc_alphabet[] = 83 "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789_."; 84 85/* configurable TIPC parameters */ 86 87u32 tipc_own_addr; 88int tipc_max_zones; 89int tipc_max_clusters; 90int tipc_max_nodes; 91int tipc_max_slaves; 92int tipc_max_ports; 93int tipc_max_subscriptions; 94int tipc_max_publications; 95int tipc_net_id; 96int tipc_remote_management; 97 98 99/** 100 * tipc_buf_acquire - creates a TIPC message buffer 101 * @size: message size (including TIPC header) 102 * 103 * Returns a new buffer with data pointers set to the specified size. 104 * 105 * NOTE: Headroom is reserved to allow prepending of a data link header. 106 * There may also be unrequested tailroom present at the buffer's end. 107 */ 108 109struct sk_buff *tipc_buf_acquire(u32 size) 110{ 111 struct sk_buff *skb; 112 unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u; 113 114 skb = alloc_skb_fclone(buf_size, GFP_ATOMIC); 115 if (skb) { 116 skb_reserve(skb, BUF_HEADROOM); 117 skb_put(skb, size); 118 skb->next = NULL; 119 } 120 return skb; 121} 122 123/** 124 * tipc_core_stop_net - shut down TIPC networking sub-systems 125 */ 126 127static void tipc_core_stop_net(void) 128{ 129 tipc_eth_media_stop(); 130 tipc_net_stop(); 131} 132 133/** 134 * start_net - start TIPC networking sub-systems 135 */ 136 137int tipc_core_start_net(unsigned long addr) 138{ 139 int res; 140 141 if ((res = tipc_net_start(addr)) || 142 (res = tipc_eth_media_start())) { 143 tipc_core_stop_net(); 144 } 145 return res; 146} 147 148/** 149 * tipc_core_stop - switch TIPC from SINGLE NODE to NOT RUNNING mode 150 */ 151 152static void tipc_core_stop(void) 153{ 154 if (tipc_mode != TIPC_NODE_MODE) 155 return; 156 157 tipc_mode = TIPC_NOT_RUNNING; 158 159 tipc_netlink_stop(); 160 tipc_handler_stop(); 161 tipc_cfg_stop(); 162 tipc_subscr_stop(); 163 tipc_reg_stop(); 164 tipc_nametbl_stop(); 165 tipc_ref_table_stop(); 166 tipc_socket_stop(); 167 tipc_log_resize(0); 168} 169 170/** 171 * tipc_core_start - switch TIPC from NOT RUNNING to SINGLE NODE mode 172 */ 173 174static int tipc_core_start(void) 175{ 176 int res; 177 178 if (tipc_mode != TIPC_NOT_RUNNING) 179 return -ENOPROTOOPT; 180 181 get_random_bytes(&tipc_random, sizeof(tipc_random)); 182 tipc_mode = TIPC_NODE_MODE; 183 184 if ((res = tipc_handler_start()) || 185 (res = tipc_ref_table_init(tipc_max_ports, tipc_random)) || 186 (res = tipc_reg_start()) || 187 (res = tipc_nametbl_init()) || 188 (res = tipc_k_signal((Handler)tipc_subscr_start, 0)) || 189 (res = tipc_k_signal((Handler)tipc_cfg_init, 0)) || 190 (res = tipc_netlink_start()) || 191 (res = tipc_socket_init())) { 192 tipc_core_stop(); 193 } 194 return res; 195} 196 197 198static int __init tipc_init(void) 199{ 200 int res; 201 202 if (tipc_log_resize(CONFIG_TIPC_LOG) != 0) 203 warn("Unable to create log buffer\n"); 204 205 info("Activated (version " TIPC_MOD_VER 206 " compiled " __DATE__ " " __TIME__ ")\n"); 207 208 tipc_own_addr = 0; 209 tipc_remote_management = 1; 210 tipc_max_publications = 10000; 211 tipc_max_subscriptions = 2000; 212 tipc_max_ports = CONFIG_TIPC_PORTS; 213 tipc_max_zones = CONFIG_TIPC_ZONES; 214 tipc_max_clusters = CONFIG_TIPC_CLUSTERS; 215 tipc_max_nodes = CONFIG_TIPC_NODES; 216 tipc_max_slaves = CONFIG_TIPC_SLAVE_NODES; 217 tipc_net_id = 4711; 218 219 if ((res = tipc_core_start())) 220 err("Unable to start in single node mode\n"); 221 else 222 info("Started in single node mode\n"); 223 return res; 224} 225 226static void __exit tipc_exit(void) 227{ 228 tipc_core_stop_net(); 229 tipc_core_stop(); 230 info("Deactivated\n"); 231} 232 233module_init(tipc_init); 234module_exit(tipc_exit); 235 236MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication"); 237MODULE_LICENSE("Dual BSD/GPL"); 238MODULE_VERSION(TIPC_MOD_VER); 239 240/* Native TIPC API for kernel-space applications (see tipc.h) */ 241 242EXPORT_SYMBOL(tipc_attach); 243EXPORT_SYMBOL(tipc_detach); 244EXPORT_SYMBOL(tipc_createport); 245EXPORT_SYMBOL(tipc_deleteport); 246EXPORT_SYMBOL(tipc_ownidentity); 247EXPORT_SYMBOL(tipc_portimportance); 248EXPORT_SYMBOL(tipc_set_portimportance); 249EXPORT_SYMBOL(tipc_portunreliable); 250EXPORT_SYMBOL(tipc_set_portunreliable); 251EXPORT_SYMBOL(tipc_portunreturnable); 252EXPORT_SYMBOL(tipc_set_portunreturnable); 253EXPORT_SYMBOL(tipc_publish); 254EXPORT_SYMBOL(tipc_withdraw); 255EXPORT_SYMBOL(tipc_connect2port); 256EXPORT_SYMBOL(tipc_disconnect); 257EXPORT_SYMBOL(tipc_shutdown); 258EXPORT_SYMBOL(tipc_send); 259EXPORT_SYMBOL(tipc_send2name); 260EXPORT_SYMBOL(tipc_send2port); 261EXPORT_SYMBOL(tipc_multicast); 262 263/* TIPC API for external bearers (see tipc_bearer.h) */ 264 265EXPORT_SYMBOL(tipc_block_bearer); 266EXPORT_SYMBOL(tipc_continue); 267EXPORT_SYMBOL(tipc_disable_bearer); 268EXPORT_SYMBOL(tipc_enable_bearer); 269EXPORT_SYMBOL(tipc_recv_msg); 270EXPORT_SYMBOL(tipc_register_media); 271 272/* TIPC API for external APIs (see tipc_port.h) */ 273 274EXPORT_SYMBOL(tipc_createport_raw); 275EXPORT_SYMBOL(tipc_reject_msg); 276EXPORT_SYMBOL(tipc_send_buf_fast); 277EXPORT_SYMBOL(tipc_acknowledge); 278