Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/*
2 * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
3 *
4 * David A Rusling
5 *
6 * Copyright (C) 2001 ARM Limited
7 *
8 * This file is subject to the terms and conditions of the GNU General Public
9 * License. See the file COPYING in the main directory of this archive
10 * for more details.
11 */
12#include <linux/fb.h>
13
14/*
15 * CLCD Controller Internal Register addresses
16 */
17#define CLCD_TIM0 0x00000000
18#define CLCD_TIM1 0x00000004
19#define CLCD_TIM2 0x00000008
20#define CLCD_TIM3 0x0000000c
21#define CLCD_UBAS 0x00000010
22#define CLCD_LBAS 0x00000014
23
24#define CLCD_PL110_IENB 0x00000018
25#define CLCD_PL110_CNTL 0x0000001c
26#define CLCD_PL110_STAT 0x00000020
27#define CLCD_PL110_INTR 0x00000024
28#define CLCD_PL110_UCUR 0x00000028
29#define CLCD_PL110_LCUR 0x0000002C
30
31#define CLCD_PL111_CNTL 0x00000018
32#define CLCD_PL111_IENB 0x0000001c
33#define CLCD_PL111_RIS 0x00000020
34#define CLCD_PL111_MIS 0x00000024
35#define CLCD_PL111_ICR 0x00000028
36#define CLCD_PL111_UCUR 0x0000002c
37#define CLCD_PL111_LCUR 0x00000030
38
39#define CLCD_PALL 0x00000200
40#define CLCD_PALETTE 0x00000200
41
42#define TIM2_CLKSEL (1 << 5)
43#define TIM2_IVS (1 << 11)
44#define TIM2_IHS (1 << 12)
45#define TIM2_IPC (1 << 13)
46#define TIM2_IOE (1 << 14)
47#define TIM2_BCD (1 << 26)
48
49#define CNTL_LCDEN (1 << 0)
50#define CNTL_LCDBPP1 (0 << 1)
51#define CNTL_LCDBPP2 (1 << 1)
52#define CNTL_LCDBPP4 (2 << 1)
53#define CNTL_LCDBPP8 (3 << 1)
54#define CNTL_LCDBPP16 (4 << 1)
55#define CNTL_LCDBPP16_565 (6 << 1)
56#define CNTL_LCDBPP24 (5 << 1)
57#define CNTL_LCDBW (1 << 4)
58#define CNTL_LCDTFT (1 << 5)
59#define CNTL_LCDMONO8 (1 << 6)
60#define CNTL_LCDDUAL (1 << 7)
61#define CNTL_BGR (1 << 8)
62#define CNTL_BEBO (1 << 9)
63#define CNTL_BEPO (1 << 10)
64#define CNTL_LCDPWR (1 << 11)
65#define CNTL_LCDVCOMP(x) ((x) << 12)
66#define CNTL_LDMAFIFOTIME (1 << 15)
67#define CNTL_WATERMARK (1 << 16)
68
69struct clcd_panel {
70 struct fb_videomode mode;
71 signed short width; /* width in mm */
72 signed short height; /* height in mm */
73 u32 tim2;
74 u32 tim3;
75 u32 cntl;
76 unsigned int bpp:8,
77 fixedtimings:1,
78 grayscale:1;
79 unsigned int connector;
80};
81
82struct clcd_regs {
83 u32 tim0;
84 u32 tim1;
85 u32 tim2;
86 u32 tim3;
87 u32 cntl;
88 unsigned long pixclock;
89};
90
91struct clcd_fb;
92
93/*
94 * the board-type specific routines
95 */
96struct clcd_board {
97 const char *name;
98
99 /*
100 * Optional. Check whether the var structure is acceptable
101 * for this display.
102 */
103 int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
104
105 /*
106 * Compulsary. Decode fb->fb.var into regs->*. In the case of
107 * fixed timing, set regs->* to the register values required.
108 */
109 void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
110
111 /*
112 * Optional. Disable any extra display hardware.
113 */
114 void (*disable)(struct clcd_fb *);
115
116 /*
117 * Optional. Enable any extra display hardware.
118 */
119 void (*enable)(struct clcd_fb *);
120
121 /*
122 * Setup platform specific parts of CLCD driver
123 */
124 int (*setup)(struct clcd_fb *);
125
126 /*
127 * mmap the framebuffer memory
128 */
129 int (*mmap)(struct clcd_fb *, struct vm_area_struct *);
130
131 /*
132 * Remove platform specific parts of CLCD driver
133 */
134 void (*remove)(struct clcd_fb *);
135};
136
137struct amba_device;
138struct clk;
139
140/* this data structure describes each frame buffer device we find */
141struct clcd_fb {
142 struct fb_info fb;
143 struct amba_device *dev;
144 struct clk *clk;
145 struct clcd_panel *panel;
146 struct clcd_board *board;
147 void *board_data;
148 void __iomem *regs;
149 u16 off_ienb;
150 u16 off_cntl;
151 u32 clcd_cntl;
152 u32 cmap[16];
153};
154
155static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
156{
157 u32 val, cpl;
158
159 /*
160 * Program the CLCD controller registers and start the CLCD
161 */
162 val = ((fb->fb.var.xres / 16) - 1) << 2;
163 val |= (fb->fb.var.hsync_len - 1) << 8;
164 val |= (fb->fb.var.right_margin - 1) << 16;
165 val |= (fb->fb.var.left_margin - 1) << 24;
166 regs->tim0 = val;
167
168 val = fb->fb.var.yres;
169 if (fb->panel->cntl & CNTL_LCDDUAL)
170 val /= 2;
171 val -= 1;
172 val |= (fb->fb.var.vsync_len - 1) << 10;
173 val |= fb->fb.var.lower_margin << 16;
174 val |= fb->fb.var.upper_margin << 24;
175 regs->tim1 = val;
176
177 val = fb->panel->tim2;
178 val |= fb->fb.var.sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
179 val |= fb->fb.var.sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
180
181 cpl = fb->fb.var.xres_virtual;
182 if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */
183 /* / 1 */;
184 else if (!fb->fb.var.grayscale) /* STN color */
185 cpl = cpl * 8 / 3;
186 else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
187 cpl /= 8;
188 else /* STN monochrome, 4bit */
189 cpl /= 4;
190
191 regs->tim2 = val | ((cpl - 1) << 16);
192
193 regs->tim3 = fb->panel->tim3;
194
195 val = fb->panel->cntl;
196 if (fb->fb.var.grayscale)
197 val |= CNTL_LCDBW;
198
199 switch (fb->fb.var.bits_per_pixel) {
200 case 1:
201 val |= CNTL_LCDBPP1;
202 break;
203 case 2:
204 val |= CNTL_LCDBPP2;
205 break;
206 case 4:
207 val |= CNTL_LCDBPP4;
208 break;
209 case 8:
210 val |= CNTL_LCDBPP8;
211 break;
212 case 16:
213 /*
214 * PL110 cannot choose between 5551 and 565 modes in
215 * its control register
216 */
217 if ((fb->dev->periphid & 0x000fffff) == 0x00041110)
218 val |= CNTL_LCDBPP16;
219 else if (fb->fb.var.green.length == 5)
220 val |= CNTL_LCDBPP16;
221 else
222 val |= CNTL_LCDBPP16_565;
223 break;
224 case 32:
225 val |= CNTL_LCDBPP24;
226 break;
227 }
228
229 regs->cntl = val;
230 regs->pixclock = fb->fb.var.pixclock;
231}
232
233static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
234{
235 var->xres_virtual = var->xres = (var->xres + 15) & ~15;
236 var->yres_virtual = var->yres = (var->yres + 1) & ~1;
237
238#define CHECK(e,l,h) (var->e < l || var->e > h)
239 if (CHECK(right_margin, (5+1), 256) || /* back porch */
240 CHECK(left_margin, (5+1), 256) || /* front porch */
241 CHECK(hsync_len, (5+1), 256) ||
242 var->xres > 4096 ||
243 var->lower_margin > 255 || /* back porch */
244 var->upper_margin > 255 || /* front porch */
245 var->vsync_len > 32 ||
246 var->yres > 1024)
247 return -EINVAL;
248#undef CHECK
249
250 /* single panel mode: PCD = max(PCD, 1) */
251 /* dual panel mode: PCD = max(PCD, 5) */
252
253 /*
254 * You can't change the grayscale setting, and
255 * we can only do non-interlaced video.
256 */
257 if (var->grayscale != fb->fb.var.grayscale ||
258 (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
259 return -EINVAL;
260
261#define CHECK(e) (var->e != fb->fb.var.e)
262 if (fb->panel->fixedtimings &&
263 (CHECK(xres) ||
264 CHECK(yres) ||
265 CHECK(bits_per_pixel) ||
266 CHECK(pixclock) ||
267 CHECK(left_margin) ||
268 CHECK(right_margin) ||
269 CHECK(upper_margin) ||
270 CHECK(lower_margin) ||
271 CHECK(hsync_len) ||
272 CHECK(vsync_len) ||
273 CHECK(sync)))
274 return -EINVAL;
275#undef CHECK
276
277 var->nonstd = 0;
278 var->accel_flags = 0;
279
280 return 0;
281}