Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v2.6.34-rc1 1825 lines 51 kB view raw
1/**************************************************************************** 2 * Driver for Solarflare Solarstorm network controllers and boards 3 * Copyright 2005-2006 Fen Systems Ltd. 4 * Copyright 2006-2009 Solarflare Communications Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 as published 8 * by the Free Software Foundation, incorporated herein by reference. 9 */ 10 11#include <linux/bitops.h> 12#include <linux/delay.h> 13#include <linux/pci.h> 14#include <linux/module.h> 15#include <linux/seq_file.h> 16#include <linux/i2c.h> 17#include <linux/mii.h> 18#include "net_driver.h" 19#include "bitfield.h" 20#include "efx.h" 21#include "mac.h" 22#include "spi.h" 23#include "nic.h" 24#include "regs.h" 25#include "io.h" 26#include "mdio_10g.h" 27#include "phy.h" 28#include "workarounds.h" 29 30/* Hardware control for SFC4000 (aka Falcon). */ 31 32static const unsigned int 33/* "Large" EEPROM device: Atmel AT25640 or similar 34 * 8 KB, 16-bit address, 32 B write block */ 35large_eeprom_type = ((13 << SPI_DEV_TYPE_SIZE_LBN) 36 | (2 << SPI_DEV_TYPE_ADDR_LEN_LBN) 37 | (5 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)), 38/* Default flash device: Atmel AT25F1024 39 * 128 KB, 24-bit address, 32 KB erase block, 256 B write block */ 40default_flash_type = ((17 << SPI_DEV_TYPE_SIZE_LBN) 41 | (3 << SPI_DEV_TYPE_ADDR_LEN_LBN) 42 | (0x52 << SPI_DEV_TYPE_ERASE_CMD_LBN) 43 | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN) 44 | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN)); 45 46/************************************************************************** 47 * 48 * I2C bus - this is a bit-bashing interface using GPIO pins 49 * Note that it uses the output enables to tristate the outputs 50 * SDA is the data pin and SCL is the clock 51 * 52 ************************************************************************** 53 */ 54static void falcon_setsda(void *data, int state) 55{ 56 struct efx_nic *efx = (struct efx_nic *)data; 57 efx_oword_t reg; 58 59 efx_reado(efx, &reg, FR_AB_GPIO_CTL); 60 EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN, !state); 61 efx_writeo(efx, &reg, FR_AB_GPIO_CTL); 62} 63 64static void falcon_setscl(void *data, int state) 65{ 66 struct efx_nic *efx = (struct efx_nic *)data; 67 efx_oword_t reg; 68 69 efx_reado(efx, &reg, FR_AB_GPIO_CTL); 70 EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO0_OEN, !state); 71 efx_writeo(efx, &reg, FR_AB_GPIO_CTL); 72} 73 74static int falcon_getsda(void *data) 75{ 76 struct efx_nic *efx = (struct efx_nic *)data; 77 efx_oword_t reg; 78 79 efx_reado(efx, &reg, FR_AB_GPIO_CTL); 80 return EFX_OWORD_FIELD(reg, FRF_AB_GPIO3_IN); 81} 82 83static int falcon_getscl(void *data) 84{ 85 struct efx_nic *efx = (struct efx_nic *)data; 86 efx_oword_t reg; 87 88 efx_reado(efx, &reg, FR_AB_GPIO_CTL); 89 return EFX_OWORD_FIELD(reg, FRF_AB_GPIO0_IN); 90} 91 92static struct i2c_algo_bit_data falcon_i2c_bit_operations = { 93 .setsda = falcon_setsda, 94 .setscl = falcon_setscl, 95 .getsda = falcon_getsda, 96 .getscl = falcon_getscl, 97 .udelay = 5, 98 /* Wait up to 50 ms for slave to let us pull SCL high */ 99 .timeout = DIV_ROUND_UP(HZ, 20), 100}; 101 102static void falcon_push_irq_moderation(struct efx_channel *channel) 103{ 104 efx_dword_t timer_cmd; 105 struct efx_nic *efx = channel->efx; 106 107 /* Set timer register */ 108 if (channel->irq_moderation) { 109 EFX_POPULATE_DWORD_2(timer_cmd, 110 FRF_AB_TC_TIMER_MODE, 111 FFE_BB_TIMER_MODE_INT_HLDOFF, 112 FRF_AB_TC_TIMER_VAL, 113 channel->irq_moderation - 1); 114 } else { 115 EFX_POPULATE_DWORD_2(timer_cmd, 116 FRF_AB_TC_TIMER_MODE, 117 FFE_BB_TIMER_MODE_DIS, 118 FRF_AB_TC_TIMER_VAL, 0); 119 } 120 BUILD_BUG_ON(FR_AA_TIMER_COMMAND_KER != FR_BZ_TIMER_COMMAND_P0); 121 efx_writed_page_locked(efx, &timer_cmd, FR_BZ_TIMER_COMMAND_P0, 122 channel->channel); 123} 124 125static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx); 126 127static void falcon_prepare_flush(struct efx_nic *efx) 128{ 129 falcon_deconfigure_mac_wrapper(efx); 130 131 /* Wait for the tx and rx fifo's to get to the next packet boundary 132 * (~1ms without back-pressure), then to drain the remainder of the 133 * fifo's at data path speeds (negligible), with a healthy margin. */ 134 msleep(10); 135} 136 137/* Acknowledge a legacy interrupt from Falcon 138 * 139 * This acknowledges a legacy (not MSI) interrupt via INT_ACK_KER_REG. 140 * 141 * Due to SFC bug 3706 (silicon revision <=A1) reads can be duplicated in the 142 * BIU. Interrupt acknowledge is read sensitive so must write instead 143 * (then read to ensure the BIU collector is flushed) 144 * 145 * NB most hardware supports MSI interrupts 146 */ 147inline void falcon_irq_ack_a1(struct efx_nic *efx) 148{ 149 efx_dword_t reg; 150 151 EFX_POPULATE_DWORD_1(reg, FRF_AA_INT_ACK_KER_FIELD, 0xb7eb7e); 152 efx_writed(efx, &reg, FR_AA_INT_ACK_KER); 153 efx_readd(efx, &reg, FR_AA_WORK_AROUND_BROKEN_PCI_READS); 154} 155 156 157irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) 158{ 159 struct efx_nic *efx = dev_id; 160 efx_oword_t *int_ker = efx->irq_status.addr; 161 struct efx_channel *channel; 162 int syserr; 163 int queues; 164 165 /* Check to see if this is our interrupt. If it isn't, we 166 * exit without having touched the hardware. 167 */ 168 if (unlikely(EFX_OWORD_IS_ZERO(*int_ker))) { 169 EFX_TRACE(efx, "IRQ %d on CPU %d not for me\n", irq, 170 raw_smp_processor_id()); 171 return IRQ_NONE; 172 } 173 efx->last_irq_cpu = raw_smp_processor_id(); 174 EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n", 175 irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker)); 176 177 /* Check to see if we have a serious error condition */ 178 syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT); 179 if (unlikely(syserr)) 180 return efx_nic_fatal_interrupt(efx); 181 182 /* Determine interrupting queues, clear interrupt status 183 * register and acknowledge the device interrupt. 184 */ 185 BUILD_BUG_ON(FSF_AZ_NET_IVEC_INT_Q_WIDTH > EFX_MAX_CHANNELS); 186 queues = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_INT_Q); 187 EFX_ZERO_OWORD(*int_ker); 188 wmb(); /* Ensure the vector is cleared before interrupt ack */ 189 falcon_irq_ack_a1(efx); 190 191 /* Schedule processing of any interrupting queues */ 192 channel = &efx->channel[0]; 193 while (queues) { 194 if (queues & 0x01) 195 efx_schedule_channel(channel); 196 channel++; 197 queues >>= 1; 198 } 199 200 return IRQ_HANDLED; 201} 202/************************************************************************** 203 * 204 * EEPROM/flash 205 * 206 ************************************************************************** 207 */ 208 209#define FALCON_SPI_MAX_LEN sizeof(efx_oword_t) 210 211static int falcon_spi_poll(struct efx_nic *efx) 212{ 213 efx_oword_t reg; 214 efx_reado(efx, &reg, FR_AB_EE_SPI_HCMD); 215 return EFX_OWORD_FIELD(reg, FRF_AB_EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0; 216} 217 218/* Wait for SPI command completion */ 219static int falcon_spi_wait(struct efx_nic *efx) 220{ 221 /* Most commands will finish quickly, so we start polling at 222 * very short intervals. Sometimes the command may have to 223 * wait for VPD or expansion ROM access outside of our 224 * control, so we allow up to 100 ms. */ 225 unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 10); 226 int i; 227 228 for (i = 0; i < 10; i++) { 229 if (!falcon_spi_poll(efx)) 230 return 0; 231 udelay(10); 232 } 233 234 for (;;) { 235 if (!falcon_spi_poll(efx)) 236 return 0; 237 if (time_after_eq(jiffies, timeout)) { 238 EFX_ERR(efx, "timed out waiting for SPI\n"); 239 return -ETIMEDOUT; 240 } 241 schedule_timeout_uninterruptible(1); 242 } 243} 244 245int falcon_spi_cmd(struct efx_nic *efx, const struct efx_spi_device *spi, 246 unsigned int command, int address, 247 const void *in, void *out, size_t len) 248{ 249 bool addressed = (address >= 0); 250 bool reading = (out != NULL); 251 efx_oword_t reg; 252 int rc; 253 254 /* Input validation */ 255 if (len > FALCON_SPI_MAX_LEN) 256 return -EINVAL; 257 BUG_ON(!mutex_is_locked(&efx->spi_lock)); 258 259 /* Check that previous command is not still running */ 260 rc = falcon_spi_poll(efx); 261 if (rc) 262 return rc; 263 264 /* Program address register, if we have an address */ 265 if (addressed) { 266 EFX_POPULATE_OWORD_1(reg, FRF_AB_EE_SPI_HADR_ADR, address); 267 efx_writeo(efx, &reg, FR_AB_EE_SPI_HADR); 268 } 269 270 /* Program data register, if we have data */ 271 if (in != NULL) { 272 memcpy(&reg, in, len); 273 efx_writeo(efx, &reg, FR_AB_EE_SPI_HDATA); 274 } 275 276 /* Issue read/write command */ 277 EFX_POPULATE_OWORD_7(reg, 278 FRF_AB_EE_SPI_HCMD_CMD_EN, 1, 279 FRF_AB_EE_SPI_HCMD_SF_SEL, spi->device_id, 280 FRF_AB_EE_SPI_HCMD_DABCNT, len, 281 FRF_AB_EE_SPI_HCMD_READ, reading, 282 FRF_AB_EE_SPI_HCMD_DUBCNT, 0, 283 FRF_AB_EE_SPI_HCMD_ADBCNT, 284 (addressed ? spi->addr_len : 0), 285 FRF_AB_EE_SPI_HCMD_ENC, command); 286 efx_writeo(efx, &reg, FR_AB_EE_SPI_HCMD); 287 288 /* Wait for read/write to complete */ 289 rc = falcon_spi_wait(efx); 290 if (rc) 291 return rc; 292 293 /* Read data */ 294 if (out != NULL) { 295 efx_reado(efx, &reg, FR_AB_EE_SPI_HDATA); 296 memcpy(out, &reg, len); 297 } 298 299 return 0; 300} 301 302static size_t 303falcon_spi_write_limit(const struct efx_spi_device *spi, size_t start) 304{ 305 return min(FALCON_SPI_MAX_LEN, 306 (spi->block_size - (start & (spi->block_size - 1)))); 307} 308 309static inline u8 310efx_spi_munge_command(const struct efx_spi_device *spi, 311 const u8 command, const unsigned int address) 312{ 313 return command | (((address >> 8) & spi->munge_address) << 3); 314} 315 316/* Wait up to 10 ms for buffered write completion */ 317int 318falcon_spi_wait_write(struct efx_nic *efx, const struct efx_spi_device *spi) 319{ 320 unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 100); 321 u8 status; 322 int rc; 323 324 for (;;) { 325 rc = falcon_spi_cmd(efx, spi, SPI_RDSR, -1, NULL, 326 &status, sizeof(status)); 327 if (rc) 328 return rc; 329 if (!(status & SPI_STATUS_NRDY)) 330 return 0; 331 if (time_after_eq(jiffies, timeout)) { 332 EFX_ERR(efx, "SPI write timeout on device %d" 333 " last status=0x%02x\n", 334 spi->device_id, status); 335 return -ETIMEDOUT; 336 } 337 schedule_timeout_uninterruptible(1); 338 } 339} 340 341int falcon_spi_read(struct efx_nic *efx, const struct efx_spi_device *spi, 342 loff_t start, size_t len, size_t *retlen, u8 *buffer) 343{ 344 size_t block_len, pos = 0; 345 unsigned int command; 346 int rc = 0; 347 348 while (pos < len) { 349 block_len = min(len - pos, FALCON_SPI_MAX_LEN); 350 351 command = efx_spi_munge_command(spi, SPI_READ, start + pos); 352 rc = falcon_spi_cmd(efx, spi, command, start + pos, NULL, 353 buffer + pos, block_len); 354 if (rc) 355 break; 356 pos += block_len; 357 358 /* Avoid locking up the system */ 359 cond_resched(); 360 if (signal_pending(current)) { 361 rc = -EINTR; 362 break; 363 } 364 } 365 366 if (retlen) 367 *retlen = pos; 368 return rc; 369} 370 371int 372falcon_spi_write(struct efx_nic *efx, const struct efx_spi_device *spi, 373 loff_t start, size_t len, size_t *retlen, const u8 *buffer) 374{ 375 u8 verify_buffer[FALCON_SPI_MAX_LEN]; 376 size_t block_len, pos = 0; 377 unsigned int command; 378 int rc = 0; 379 380 while (pos < len) { 381 rc = falcon_spi_cmd(efx, spi, SPI_WREN, -1, NULL, NULL, 0); 382 if (rc) 383 break; 384 385 block_len = min(len - pos, 386 falcon_spi_write_limit(spi, start + pos)); 387 command = efx_spi_munge_command(spi, SPI_WRITE, start + pos); 388 rc = falcon_spi_cmd(efx, spi, command, start + pos, 389 buffer + pos, NULL, block_len); 390 if (rc) 391 break; 392 393 rc = falcon_spi_wait_write(efx, spi); 394 if (rc) 395 break; 396 397 command = efx_spi_munge_command(spi, SPI_READ, start + pos); 398 rc = falcon_spi_cmd(efx, spi, command, start + pos, 399 NULL, verify_buffer, block_len); 400 if (memcmp(verify_buffer, buffer + pos, block_len)) { 401 rc = -EIO; 402 break; 403 } 404 405 pos += block_len; 406 407 /* Avoid locking up the system */ 408 cond_resched(); 409 if (signal_pending(current)) { 410 rc = -EINTR; 411 break; 412 } 413 } 414 415 if (retlen) 416 *retlen = pos; 417 return rc; 418} 419 420/************************************************************************** 421 * 422 * MAC wrapper 423 * 424 ************************************************************************** 425 */ 426 427static void falcon_push_multicast_hash(struct efx_nic *efx) 428{ 429 union efx_multicast_hash *mc_hash = &efx->multicast_hash; 430 431 WARN_ON(!mutex_is_locked(&efx->mac_lock)); 432 433 efx_writeo(efx, &mc_hash->oword[0], FR_AB_MAC_MC_HASH_REG0); 434 efx_writeo(efx, &mc_hash->oword[1], FR_AB_MAC_MC_HASH_REG1); 435} 436 437static void falcon_reset_macs(struct efx_nic *efx) 438{ 439 struct falcon_nic_data *nic_data = efx->nic_data; 440 efx_oword_t reg, mac_ctrl; 441 int count; 442 443 if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) { 444 /* It's not safe to use GLB_CTL_REG to reset the 445 * macs, so instead use the internal MAC resets 446 */ 447 if (!EFX_IS10G(efx)) { 448 EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 1); 449 efx_writeo(efx, &reg, FR_AB_GM_CFG1); 450 udelay(1000); 451 452 EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 0); 453 efx_writeo(efx, &reg, FR_AB_GM_CFG1); 454 udelay(1000); 455 return; 456 } else { 457 EFX_POPULATE_OWORD_1(reg, FRF_AB_XM_CORE_RST, 1); 458 efx_writeo(efx, &reg, FR_AB_XM_GLB_CFG); 459 460 for (count = 0; count < 10000; count++) { 461 efx_reado(efx, &reg, FR_AB_XM_GLB_CFG); 462 if (EFX_OWORD_FIELD(reg, FRF_AB_XM_CORE_RST) == 463 0) 464 return; 465 udelay(10); 466 } 467 468 EFX_ERR(efx, "timed out waiting for XMAC core reset\n"); 469 } 470 } 471 472 /* Mac stats will fail whist the TX fifo is draining */ 473 WARN_ON(nic_data->stats_disable_count == 0); 474 475 efx_reado(efx, &mac_ctrl, FR_AB_MAC_CTRL); 476 EFX_SET_OWORD_FIELD(mac_ctrl, FRF_BB_TXFIFO_DRAIN_EN, 1); 477 efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL); 478 479 efx_reado(efx, &reg, FR_AB_GLB_CTL); 480 EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGTX, 1); 481 EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGRX, 1); 482 EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_EM, 1); 483 efx_writeo(efx, &reg, FR_AB_GLB_CTL); 484 485 count = 0; 486 while (1) { 487 efx_reado(efx, &reg, FR_AB_GLB_CTL); 488 if (!EFX_OWORD_FIELD(reg, FRF_AB_RST_XGTX) && 489 !EFX_OWORD_FIELD(reg, FRF_AB_RST_XGRX) && 490 !EFX_OWORD_FIELD(reg, FRF_AB_RST_EM)) { 491 EFX_LOG(efx, "Completed MAC reset after %d loops\n", 492 count); 493 break; 494 } 495 if (count > 20) { 496 EFX_ERR(efx, "MAC reset failed\n"); 497 break; 498 } 499 count++; 500 udelay(10); 501 } 502 503 /* Ensure the correct MAC is selected before statistics 504 * are re-enabled by the caller */ 505 efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL); 506} 507 508void falcon_drain_tx_fifo(struct efx_nic *efx) 509{ 510 efx_oword_t reg; 511 512 if ((efx_nic_rev(efx) < EFX_REV_FALCON_B0) || 513 (efx->loopback_mode != LOOPBACK_NONE)) 514 return; 515 516 efx_reado(efx, &reg, FR_AB_MAC_CTRL); 517 /* There is no point in draining more than once */ 518 if (EFX_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN)) 519 return; 520 521 falcon_reset_macs(efx); 522} 523 524static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx) 525{ 526 efx_oword_t reg; 527 528 if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) 529 return; 530 531 /* Isolate the MAC -> RX */ 532 efx_reado(efx, &reg, FR_AZ_RX_CFG); 533 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 0); 534 efx_writeo(efx, &reg, FR_AZ_RX_CFG); 535 536 /* Isolate TX -> MAC */ 537 falcon_drain_tx_fifo(efx); 538} 539 540void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) 541{ 542 struct efx_link_state *link_state = &efx->link_state; 543 efx_oword_t reg; 544 int link_speed; 545 546 switch (link_state->speed) { 547 case 10000: link_speed = 3; break; 548 case 1000: link_speed = 2; break; 549 case 100: link_speed = 1; break; 550 default: link_speed = 0; break; 551 } 552 /* MAC_LINK_STATUS controls MAC backpressure but doesn't work 553 * as advertised. Disable to ensure packets are not 554 * indefinitely held and TX queue can be flushed at any point 555 * while the link is down. */ 556 EFX_POPULATE_OWORD_5(reg, 557 FRF_AB_MAC_XOFF_VAL, 0xffff /* max pause time */, 558 FRF_AB_MAC_BCAD_ACPT, 1, 559 FRF_AB_MAC_UC_PROM, efx->promiscuous, 560 FRF_AB_MAC_LINK_STATUS, 1, /* always set */ 561 FRF_AB_MAC_SPEED, link_speed); 562 /* On B0, MAC backpressure can be disabled and packets get 563 * discarded. */ 564 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { 565 EFX_SET_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN, 566 !link_state->up); 567 } 568 569 efx_writeo(efx, &reg, FR_AB_MAC_CTRL); 570 571 /* Restore the multicast hash registers. */ 572 falcon_push_multicast_hash(efx); 573 574 efx_reado(efx, &reg, FR_AZ_RX_CFG); 575 /* Enable XOFF signal from RX FIFO (we enabled it during NIC 576 * initialisation but it may read back as 0) */ 577 EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1); 578 /* Unisolate the MAC -> RX */ 579 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) 580 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1); 581 efx_writeo(efx, &reg, FR_AZ_RX_CFG); 582} 583 584static void falcon_stats_request(struct efx_nic *efx) 585{ 586 struct falcon_nic_data *nic_data = efx->nic_data; 587 efx_oword_t reg; 588 589 WARN_ON(nic_data->stats_pending); 590 WARN_ON(nic_data->stats_disable_count); 591 592 if (nic_data->stats_dma_done == NULL) 593 return; /* no mac selected */ 594 595 *nic_data->stats_dma_done = FALCON_STATS_NOT_DONE; 596 nic_data->stats_pending = true; 597 wmb(); /* ensure done flag is clear */ 598 599 /* Initiate DMA transfer of stats */ 600 EFX_POPULATE_OWORD_2(reg, 601 FRF_AB_MAC_STAT_DMA_CMD, 1, 602 FRF_AB_MAC_STAT_DMA_ADR, 603 efx->stats_buffer.dma_addr); 604 efx_writeo(efx, &reg, FR_AB_MAC_STAT_DMA); 605 606 mod_timer(&nic_data->stats_timer, round_jiffies_up(jiffies + HZ / 2)); 607} 608 609static void falcon_stats_complete(struct efx_nic *efx) 610{ 611 struct falcon_nic_data *nic_data = efx->nic_data; 612 613 if (!nic_data->stats_pending) 614 return; 615 616 nic_data->stats_pending = 0; 617 if (*nic_data->stats_dma_done == FALCON_STATS_DONE) { 618 rmb(); /* read the done flag before the stats */ 619 efx->mac_op->update_stats(efx); 620 } else { 621 EFX_ERR(efx, "timed out waiting for statistics\n"); 622 } 623} 624 625static void falcon_stats_timer_func(unsigned long context) 626{ 627 struct efx_nic *efx = (struct efx_nic *)context; 628 struct falcon_nic_data *nic_data = efx->nic_data; 629 630 spin_lock(&efx->stats_lock); 631 632 falcon_stats_complete(efx); 633 if (nic_data->stats_disable_count == 0) 634 falcon_stats_request(efx); 635 636 spin_unlock(&efx->stats_lock); 637} 638 639static void falcon_switch_mac(struct efx_nic *efx); 640 641static bool falcon_loopback_link_poll(struct efx_nic *efx) 642{ 643 struct efx_link_state old_state = efx->link_state; 644 645 WARN_ON(!mutex_is_locked(&efx->mac_lock)); 646 WARN_ON(!LOOPBACK_INTERNAL(efx)); 647 648 efx->link_state.fd = true; 649 efx->link_state.fc = efx->wanted_fc; 650 efx->link_state.up = true; 651 652 if (efx->loopback_mode == LOOPBACK_GMAC) 653 efx->link_state.speed = 1000; 654 else 655 efx->link_state.speed = 10000; 656 657 return !efx_link_state_equal(&efx->link_state, &old_state); 658} 659 660static int falcon_reconfigure_port(struct efx_nic *efx) 661{ 662 int rc; 663 664 WARN_ON(efx_nic_rev(efx) > EFX_REV_FALCON_B0); 665 666 /* Poll the PHY link state *before* reconfiguring it. This means we 667 * will pick up the correct speed (in loopback) to select the correct 668 * MAC. 669 */ 670 if (LOOPBACK_INTERNAL(efx)) 671 falcon_loopback_link_poll(efx); 672 else 673 efx->phy_op->poll(efx); 674 675 falcon_stop_nic_stats(efx); 676 falcon_deconfigure_mac_wrapper(efx); 677 678 falcon_switch_mac(efx); 679 680 efx->phy_op->reconfigure(efx); 681 rc = efx->mac_op->reconfigure(efx); 682 BUG_ON(rc); 683 684 falcon_start_nic_stats(efx); 685 686 /* Synchronise efx->link_state with the kernel */ 687 efx_link_status_changed(efx); 688 689 return 0; 690} 691 692/************************************************************************** 693 * 694 * PHY access via GMII 695 * 696 ************************************************************************** 697 */ 698 699/* Wait for GMII access to complete */ 700static int falcon_gmii_wait(struct efx_nic *efx) 701{ 702 efx_oword_t md_stat; 703 int count; 704 705 /* wait upto 50ms - taken max from datasheet */ 706 for (count = 0; count < 5000; count++) { 707 efx_reado(efx, &md_stat, FR_AB_MD_STAT); 708 if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) { 709 if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_LNFL) != 0 || 710 EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSERR) != 0) { 711 EFX_ERR(efx, "error from GMII access " 712 EFX_OWORD_FMT"\n", 713 EFX_OWORD_VAL(md_stat)); 714 return -EIO; 715 } 716 return 0; 717 } 718 udelay(10); 719 } 720 EFX_ERR(efx, "timed out waiting for GMII\n"); 721 return -ETIMEDOUT; 722} 723 724/* Write an MDIO register of a PHY connected to Falcon. */ 725static int falcon_mdio_write(struct net_device *net_dev, 726 int prtad, int devad, u16 addr, u16 value) 727{ 728 struct efx_nic *efx = netdev_priv(net_dev); 729 efx_oword_t reg; 730 int rc; 731 732 EFX_REGDUMP(efx, "writing MDIO %d register %d.%d with 0x%04x\n", 733 prtad, devad, addr, value); 734 735 mutex_lock(&efx->mdio_lock); 736 737 /* Check MDIO not currently being accessed */ 738 rc = falcon_gmii_wait(efx); 739 if (rc) 740 goto out; 741 742 /* Write the address/ID register */ 743 EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr); 744 efx_writeo(efx, &reg, FR_AB_MD_PHY_ADR); 745 746 EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad, 747 FRF_AB_MD_DEV_ADR, devad); 748 efx_writeo(efx, &reg, FR_AB_MD_ID); 749 750 /* Write data */ 751 EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_TXD, value); 752 efx_writeo(efx, &reg, FR_AB_MD_TXD); 753 754 EFX_POPULATE_OWORD_2(reg, 755 FRF_AB_MD_WRC, 1, 756 FRF_AB_MD_GC, 0); 757 efx_writeo(efx, &reg, FR_AB_MD_CS); 758 759 /* Wait for data to be written */ 760 rc = falcon_gmii_wait(efx); 761 if (rc) { 762 /* Abort the write operation */ 763 EFX_POPULATE_OWORD_2(reg, 764 FRF_AB_MD_WRC, 0, 765 FRF_AB_MD_GC, 1); 766 efx_writeo(efx, &reg, FR_AB_MD_CS); 767 udelay(10); 768 } 769 770out: 771 mutex_unlock(&efx->mdio_lock); 772 return rc; 773} 774 775/* Read an MDIO register of a PHY connected to Falcon. */ 776static int falcon_mdio_read(struct net_device *net_dev, 777 int prtad, int devad, u16 addr) 778{ 779 struct efx_nic *efx = netdev_priv(net_dev); 780 efx_oword_t reg; 781 int rc; 782 783 mutex_lock(&efx->mdio_lock); 784 785 /* Check MDIO not currently being accessed */ 786 rc = falcon_gmii_wait(efx); 787 if (rc) 788 goto out; 789 790 EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr); 791 efx_writeo(efx, &reg, FR_AB_MD_PHY_ADR); 792 793 EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad, 794 FRF_AB_MD_DEV_ADR, devad); 795 efx_writeo(efx, &reg, FR_AB_MD_ID); 796 797 /* Request data to be read */ 798 EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_RDC, 1, FRF_AB_MD_GC, 0); 799 efx_writeo(efx, &reg, FR_AB_MD_CS); 800 801 /* Wait for data to become available */ 802 rc = falcon_gmii_wait(efx); 803 if (rc == 0) { 804 efx_reado(efx, &reg, FR_AB_MD_RXD); 805 rc = EFX_OWORD_FIELD(reg, FRF_AB_MD_RXD); 806 EFX_REGDUMP(efx, "read from MDIO %d register %d.%d, got %04x\n", 807 prtad, devad, addr, rc); 808 } else { 809 /* Abort the read operation */ 810 EFX_POPULATE_OWORD_2(reg, 811 FRF_AB_MD_RIC, 0, 812 FRF_AB_MD_GC, 1); 813 efx_writeo(efx, &reg, FR_AB_MD_CS); 814 815 EFX_LOG(efx, "read from MDIO %d register %d.%d, got error %d\n", 816 prtad, devad, addr, rc); 817 } 818 819out: 820 mutex_unlock(&efx->mdio_lock); 821 return rc; 822} 823 824static void falcon_clock_mac(struct efx_nic *efx) 825{ 826 unsigned strap_val; 827 efx_oword_t nic_stat; 828 829 /* Configure the NIC generated MAC clock correctly */ 830 efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); 831 strap_val = EFX_IS10G(efx) ? 5 : 3; 832 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { 833 EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP_EN, 1); 834 EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP, strap_val); 835 efx_writeo(efx, &nic_stat, FR_AB_NIC_STAT); 836 } else { 837 /* Falcon A1 does not support 1G/10G speed switching 838 * and must not be used with a PHY that does. */ 839 BUG_ON(EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_PINS) != 840 strap_val); 841 } 842} 843 844static void falcon_switch_mac(struct efx_nic *efx) 845{ 846 struct efx_mac_operations *old_mac_op = efx->mac_op; 847 struct falcon_nic_data *nic_data = efx->nic_data; 848 unsigned int stats_done_offset; 849 850 WARN_ON(!mutex_is_locked(&efx->mac_lock)); 851 WARN_ON(nic_data->stats_disable_count == 0); 852 853 efx->mac_op = (EFX_IS10G(efx) ? 854 &falcon_xmac_operations : &falcon_gmac_operations); 855 856 if (EFX_IS10G(efx)) 857 stats_done_offset = XgDmaDone_offset; 858 else 859 stats_done_offset = GDmaDone_offset; 860 nic_data->stats_dma_done = efx->stats_buffer.addr + stats_done_offset; 861 862 if (old_mac_op == efx->mac_op) 863 return; 864 865 falcon_clock_mac(efx); 866 867 EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); 868 /* Not all macs support a mac-level link state */ 869 efx->xmac_poll_required = false; 870 falcon_reset_macs(efx); 871} 872 873/* This call is responsible for hooking in the MAC and PHY operations */ 874static int falcon_probe_port(struct efx_nic *efx) 875{ 876 int rc; 877 878 switch (efx->phy_type) { 879 case PHY_TYPE_SFX7101: 880 efx->phy_op = &falcon_sfx7101_phy_ops; 881 break; 882 case PHY_TYPE_SFT9001A: 883 case PHY_TYPE_SFT9001B: 884 efx->phy_op = &falcon_sft9001_phy_ops; 885 break; 886 case PHY_TYPE_QT2022C2: 887 case PHY_TYPE_QT2025C: 888 efx->phy_op = &falcon_qt202x_phy_ops; 889 break; 890 default: 891 EFX_ERR(efx, "Unknown PHY type %d\n", 892 efx->phy_type); 893 return -ENODEV; 894 } 895 896 /* Fill out MDIO structure and loopback modes */ 897 efx->mdio.mdio_read = falcon_mdio_read; 898 efx->mdio.mdio_write = falcon_mdio_write; 899 rc = efx->phy_op->probe(efx); 900 if (rc != 0) 901 return rc; 902 903 /* Initial assumption */ 904 efx->link_state.speed = 10000; 905 efx->link_state.fd = true; 906 907 /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ 908 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) 909 efx->wanted_fc = EFX_FC_RX | EFX_FC_TX; 910 else 911 efx->wanted_fc = EFX_FC_RX; 912 if (efx->mdio.mmds & MDIO_DEVS_AN) 913 efx->wanted_fc |= EFX_FC_AUTO; 914 915 /* Allocate buffer for stats */ 916 rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer, 917 FALCON_MAC_STATS_SIZE); 918 if (rc) 919 return rc; 920 EFX_LOG(efx, "stats buffer at %llx (virt %p phys %llx)\n", 921 (u64)efx->stats_buffer.dma_addr, 922 efx->stats_buffer.addr, 923 (u64)virt_to_phys(efx->stats_buffer.addr)); 924 925 return 0; 926} 927 928static void falcon_remove_port(struct efx_nic *efx) 929{ 930 efx->phy_op->remove(efx); 931 efx_nic_free_buffer(efx, &efx->stats_buffer); 932} 933 934/************************************************************************** 935 * 936 * Falcon test code 937 * 938 **************************************************************************/ 939 940static int 941falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out) 942{ 943 struct falcon_nvconfig *nvconfig; 944 struct efx_spi_device *spi; 945 void *region; 946 int rc, magic_num, struct_ver; 947 __le16 *word, *limit; 948 u32 csum; 949 950 spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom; 951 if (!spi) 952 return -EINVAL; 953 954 region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL); 955 if (!region) 956 return -ENOMEM; 957 nvconfig = region + FALCON_NVCONFIG_OFFSET; 958 959 mutex_lock(&efx->spi_lock); 960 rc = falcon_spi_read(efx, spi, 0, FALCON_NVCONFIG_END, NULL, region); 961 mutex_unlock(&efx->spi_lock); 962 if (rc) { 963 EFX_ERR(efx, "Failed to read %s\n", 964 efx->spi_flash ? "flash" : "EEPROM"); 965 rc = -EIO; 966 goto out; 967 } 968 969 magic_num = le16_to_cpu(nvconfig->board_magic_num); 970 struct_ver = le16_to_cpu(nvconfig->board_struct_ver); 971 972 rc = -EINVAL; 973 if (magic_num != FALCON_NVCONFIG_BOARD_MAGIC_NUM) { 974 EFX_ERR(efx, "NVRAM bad magic 0x%x\n", magic_num); 975 goto out; 976 } 977 if (struct_ver < 2) { 978 EFX_ERR(efx, "NVRAM has ancient version 0x%x\n", struct_ver); 979 goto out; 980 } else if (struct_ver < 4) { 981 word = &nvconfig->board_magic_num; 982 limit = (__le16 *) (nvconfig + 1); 983 } else { 984 word = region; 985 limit = region + FALCON_NVCONFIG_END; 986 } 987 for (csum = 0; word < limit; ++word) 988 csum += le16_to_cpu(*word); 989 990 if (~csum & 0xffff) { 991 EFX_ERR(efx, "NVRAM has incorrect checksum\n"); 992 goto out; 993 } 994 995 rc = 0; 996 if (nvconfig_out) 997 memcpy(nvconfig_out, nvconfig, sizeof(*nvconfig)); 998 999 out: 1000 kfree(region); 1001 return rc; 1002} 1003 1004static int falcon_test_nvram(struct efx_nic *efx) 1005{ 1006 return falcon_read_nvram(efx, NULL); 1007} 1008 1009static const struct efx_nic_register_test falcon_b0_register_tests[] = { 1010 { FR_AZ_ADR_REGION, 1011 EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) }, 1012 { FR_AZ_RX_CFG, 1013 EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) }, 1014 { FR_AZ_TX_CFG, 1015 EFX_OWORD32(0x7FFF0037, 0x00000000, 0x00000000, 0x00000000) }, 1016 { FR_AZ_TX_RESERVED, 1017 EFX_OWORD32(0xFFFEFE80, 0x1FFFFFFF, 0x020000FE, 0x007FFFFF) }, 1018 { FR_AB_MAC_CTRL, 1019 EFX_OWORD32(0xFFFF0000, 0x00000000, 0x00000000, 0x00000000) }, 1020 { FR_AZ_SRM_TX_DC_CFG, 1021 EFX_OWORD32(0x001FFFFF, 0x00000000, 0x00000000, 0x00000000) }, 1022 { FR_AZ_RX_DC_CFG, 1023 EFX_OWORD32(0x0000000F, 0x00000000, 0x00000000, 0x00000000) }, 1024 { FR_AZ_RX_DC_PF_WM, 1025 EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) }, 1026 { FR_BZ_DP_CTRL, 1027 EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) }, 1028 { FR_AB_GM_CFG2, 1029 EFX_OWORD32(0x00007337, 0x00000000, 0x00000000, 0x00000000) }, 1030 { FR_AB_GMF_CFG0, 1031 EFX_OWORD32(0x00001F1F, 0x00000000, 0x00000000, 0x00000000) }, 1032 { FR_AB_XM_GLB_CFG, 1033 EFX_OWORD32(0x00000C68, 0x00000000, 0x00000000, 0x00000000) }, 1034 { FR_AB_XM_TX_CFG, 1035 EFX_OWORD32(0x00080164, 0x00000000, 0x00000000, 0x00000000) }, 1036 { FR_AB_XM_RX_CFG, 1037 EFX_OWORD32(0x07100A0C, 0x00000000, 0x00000000, 0x00000000) }, 1038 { FR_AB_XM_RX_PARAM, 1039 EFX_OWORD32(0x00001FF8, 0x00000000, 0x00000000, 0x00000000) }, 1040 { FR_AB_XM_FC, 1041 EFX_OWORD32(0xFFFF0001, 0x00000000, 0x00000000, 0x00000000) }, 1042 { FR_AB_XM_ADR_LO, 1043 EFX_OWORD32(0xFFFFFFFF, 0x00000000, 0x00000000, 0x00000000) }, 1044 { FR_AB_XX_SD_CTL, 1045 EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) }, 1046}; 1047 1048static int falcon_b0_test_registers(struct efx_nic *efx) 1049{ 1050 return efx_nic_test_registers(efx, falcon_b0_register_tests, 1051 ARRAY_SIZE(falcon_b0_register_tests)); 1052} 1053 1054/************************************************************************** 1055 * 1056 * Device reset 1057 * 1058 ************************************************************************** 1059 */ 1060 1061/* Resets NIC to known state. This routine must be called in process 1062 * context and is allowed to sleep. */ 1063static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) 1064{ 1065 struct falcon_nic_data *nic_data = efx->nic_data; 1066 efx_oword_t glb_ctl_reg_ker; 1067 int rc; 1068 1069 EFX_LOG(efx, "performing %s hardware reset\n", RESET_TYPE(method)); 1070 1071 /* Initiate device reset */ 1072 if (method == RESET_TYPE_WORLD) { 1073 rc = pci_save_state(efx->pci_dev); 1074 if (rc) { 1075 EFX_ERR(efx, "failed to backup PCI state of primary " 1076 "function prior to hardware reset\n"); 1077 goto fail1; 1078 } 1079 if (efx_nic_is_dual_func(efx)) { 1080 rc = pci_save_state(nic_data->pci_dev2); 1081 if (rc) { 1082 EFX_ERR(efx, "failed to backup PCI state of " 1083 "secondary function prior to " 1084 "hardware reset\n"); 1085 goto fail2; 1086 } 1087 } 1088 1089 EFX_POPULATE_OWORD_2(glb_ctl_reg_ker, 1090 FRF_AB_EXT_PHY_RST_DUR, 1091 FFE_AB_EXT_PHY_RST_DUR_10240US, 1092 FRF_AB_SWRST, 1); 1093 } else { 1094 EFX_POPULATE_OWORD_7(glb_ctl_reg_ker, 1095 /* exclude PHY from "invisible" reset */ 1096 FRF_AB_EXT_PHY_RST_CTL, 1097 method == RESET_TYPE_INVISIBLE, 1098 /* exclude EEPROM/flash and PCIe */ 1099 FRF_AB_PCIE_CORE_RST_CTL, 1, 1100 FRF_AB_PCIE_NSTKY_RST_CTL, 1, 1101 FRF_AB_PCIE_SD_RST_CTL, 1, 1102 FRF_AB_EE_RST_CTL, 1, 1103 FRF_AB_EXT_PHY_RST_DUR, 1104 FFE_AB_EXT_PHY_RST_DUR_10240US, 1105 FRF_AB_SWRST, 1); 1106 } 1107 efx_writeo(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL); 1108 1109 EFX_LOG(efx, "waiting for hardware reset\n"); 1110 schedule_timeout_uninterruptible(HZ / 20); 1111 1112 /* Restore PCI configuration if needed */ 1113 if (method == RESET_TYPE_WORLD) { 1114 if (efx_nic_is_dual_func(efx)) { 1115 rc = pci_restore_state(nic_data->pci_dev2); 1116 if (rc) { 1117 EFX_ERR(efx, "failed to restore PCI config for " 1118 "the secondary function\n"); 1119 goto fail3; 1120 } 1121 } 1122 rc = pci_restore_state(efx->pci_dev); 1123 if (rc) { 1124 EFX_ERR(efx, "failed to restore PCI config for the " 1125 "primary function\n"); 1126 goto fail4; 1127 } 1128 EFX_LOG(efx, "successfully restored PCI config\n"); 1129 } 1130 1131 /* Assert that reset complete */ 1132 efx_reado(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL); 1133 if (EFX_OWORD_FIELD(glb_ctl_reg_ker, FRF_AB_SWRST) != 0) { 1134 rc = -ETIMEDOUT; 1135 EFX_ERR(efx, "timed out waiting for hardware reset\n"); 1136 goto fail5; 1137 } 1138 EFX_LOG(efx, "hardware reset complete\n"); 1139 1140 return 0; 1141 1142 /* pci_save_state() and pci_restore_state() MUST be called in pairs */ 1143fail2: 1144fail3: 1145 pci_restore_state(efx->pci_dev); 1146fail1: 1147fail4: 1148fail5: 1149 return rc; 1150} 1151 1152static void falcon_monitor(struct efx_nic *efx) 1153{ 1154 bool link_changed; 1155 int rc; 1156 1157 BUG_ON(!mutex_is_locked(&efx->mac_lock)); 1158 1159 rc = falcon_board(efx)->type->monitor(efx); 1160 if (rc) { 1161 EFX_ERR(efx, "Board sensor %s; shutting down PHY\n", 1162 (rc == -ERANGE) ? "reported fault" : "failed"); 1163 efx->phy_mode |= PHY_MODE_LOW_POWER; 1164 rc = __efx_reconfigure_port(efx); 1165 WARN_ON(rc); 1166 } 1167 1168 if (LOOPBACK_INTERNAL(efx)) 1169 link_changed = falcon_loopback_link_poll(efx); 1170 else 1171 link_changed = efx->phy_op->poll(efx); 1172 1173 if (link_changed) { 1174 falcon_stop_nic_stats(efx); 1175 falcon_deconfigure_mac_wrapper(efx); 1176 1177 falcon_switch_mac(efx); 1178 rc = efx->mac_op->reconfigure(efx); 1179 BUG_ON(rc); 1180 1181 falcon_start_nic_stats(efx); 1182 1183 efx_link_status_changed(efx); 1184 } 1185 1186 if (EFX_IS10G(efx)) 1187 falcon_poll_xmac(efx); 1188} 1189 1190/* Zeroes out the SRAM contents. This routine must be called in 1191 * process context and is allowed to sleep. 1192 */ 1193static int falcon_reset_sram(struct efx_nic *efx) 1194{ 1195 efx_oword_t srm_cfg_reg_ker, gpio_cfg_reg_ker; 1196 int count; 1197 1198 /* Set the SRAM wake/sleep GPIO appropriately. */ 1199 efx_reado(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL); 1200 EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OEN, 1); 1201 EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OUT, 1); 1202 efx_writeo(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL); 1203 1204 /* Initiate SRAM reset */ 1205 EFX_POPULATE_OWORD_2(srm_cfg_reg_ker, 1206 FRF_AZ_SRM_INIT_EN, 1, 1207 FRF_AZ_SRM_NB_SZ, 0); 1208 efx_writeo(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG); 1209 1210 /* Wait for SRAM reset to complete */ 1211 count = 0; 1212 do { 1213 EFX_LOG(efx, "waiting for SRAM reset (attempt %d)...\n", count); 1214 1215 /* SRAM reset is slow; expect around 16ms */ 1216 schedule_timeout_uninterruptible(HZ / 50); 1217 1218 /* Check for reset complete */ 1219 efx_reado(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG); 1220 if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, FRF_AZ_SRM_INIT_EN)) { 1221 EFX_LOG(efx, "SRAM reset complete\n"); 1222 1223 return 0; 1224 } 1225 } while (++count < 20); /* wait upto 0.4 sec */ 1226 1227 EFX_ERR(efx, "timed out waiting for SRAM reset\n"); 1228 return -ETIMEDOUT; 1229} 1230 1231static int falcon_spi_device_init(struct efx_nic *efx, 1232 struct efx_spi_device **spi_device_ret, 1233 unsigned int device_id, u32 device_type) 1234{ 1235 struct efx_spi_device *spi_device; 1236 1237 if (device_type != 0) { 1238 spi_device = kzalloc(sizeof(*spi_device), GFP_KERNEL); 1239 if (!spi_device) 1240 return -ENOMEM; 1241 spi_device->device_id = device_id; 1242 spi_device->size = 1243 1 << SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_SIZE); 1244 spi_device->addr_len = 1245 SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ADDR_LEN); 1246 spi_device->munge_address = (spi_device->size == 1 << 9 && 1247 spi_device->addr_len == 1); 1248 spi_device->erase_command = 1249 SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_ERASE_CMD); 1250 spi_device->erase_size = 1251 1 << SPI_DEV_TYPE_FIELD(device_type, 1252 SPI_DEV_TYPE_ERASE_SIZE); 1253 spi_device->block_size = 1254 1 << SPI_DEV_TYPE_FIELD(device_type, 1255 SPI_DEV_TYPE_BLOCK_SIZE); 1256 } else { 1257 spi_device = NULL; 1258 } 1259 1260 kfree(*spi_device_ret); 1261 *spi_device_ret = spi_device; 1262 return 0; 1263} 1264 1265static void falcon_remove_spi_devices(struct efx_nic *efx) 1266{ 1267 kfree(efx->spi_eeprom); 1268 efx->spi_eeprom = NULL; 1269 kfree(efx->spi_flash); 1270 efx->spi_flash = NULL; 1271} 1272 1273/* Extract non-volatile configuration */ 1274static int falcon_probe_nvconfig(struct efx_nic *efx) 1275{ 1276 struct falcon_nvconfig *nvconfig; 1277 int board_rev; 1278 int rc; 1279 1280 nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL); 1281 if (!nvconfig) 1282 return -ENOMEM; 1283 1284 rc = falcon_read_nvram(efx, nvconfig); 1285 if (rc == -EINVAL) { 1286 EFX_ERR(efx, "NVRAM is invalid therefore using defaults\n"); 1287 efx->phy_type = PHY_TYPE_NONE; 1288 efx->mdio.prtad = MDIO_PRTAD_NONE; 1289 board_rev = 0; 1290 rc = 0; 1291 } else if (rc) { 1292 goto fail1; 1293 } else { 1294 struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2; 1295 struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3; 1296 1297 efx->phy_type = v2->port0_phy_type; 1298 efx->mdio.prtad = v2->port0_phy_addr; 1299 board_rev = le16_to_cpu(v2->board_revision); 1300 1301 if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) { 1302 rc = falcon_spi_device_init( 1303 efx, &efx->spi_flash, FFE_AB_SPI_DEVICE_FLASH, 1304 le32_to_cpu(v3->spi_device_type 1305 [FFE_AB_SPI_DEVICE_FLASH])); 1306 if (rc) 1307 goto fail2; 1308 rc = falcon_spi_device_init( 1309 efx, &efx->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM, 1310 le32_to_cpu(v3->spi_device_type 1311 [FFE_AB_SPI_DEVICE_EEPROM])); 1312 if (rc) 1313 goto fail2; 1314 } 1315 } 1316 1317 /* Read the MAC addresses */ 1318 memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN); 1319 1320 EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad); 1321 1322 falcon_probe_board(efx, board_rev); 1323 1324 kfree(nvconfig); 1325 return 0; 1326 1327 fail2: 1328 falcon_remove_spi_devices(efx); 1329 fail1: 1330 kfree(nvconfig); 1331 return rc; 1332} 1333 1334/* Probe all SPI devices on the NIC */ 1335static void falcon_probe_spi_devices(struct efx_nic *efx) 1336{ 1337 efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg; 1338 int boot_dev; 1339 1340 efx_reado(efx, &gpio_ctl, FR_AB_GPIO_CTL); 1341 efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); 1342 efx_reado(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0); 1343 1344 if (EFX_OWORD_FIELD(gpio_ctl, FRF_AB_GPIO3_PWRUP_VALUE)) { 1345 boot_dev = (EFX_OWORD_FIELD(nic_stat, FRF_AB_SF_PRST) ? 1346 FFE_AB_SPI_DEVICE_FLASH : FFE_AB_SPI_DEVICE_EEPROM); 1347 EFX_LOG(efx, "Booted from %s\n", 1348 boot_dev == FFE_AB_SPI_DEVICE_FLASH ? "flash" : "EEPROM"); 1349 } else { 1350 /* Disable VPD and set clock dividers to safe 1351 * values for initial programming. */ 1352 boot_dev = -1; 1353 EFX_LOG(efx, "Booted from internal ASIC settings;" 1354 " setting SPI config\n"); 1355 EFX_POPULATE_OWORD_3(ee_vpd_cfg, FRF_AB_EE_VPD_EN, 0, 1356 /* 125 MHz / 7 ~= 20 MHz */ 1357 FRF_AB_EE_SF_CLOCK_DIV, 7, 1358 /* 125 MHz / 63 ~= 2 MHz */ 1359 FRF_AB_EE_EE_CLOCK_DIV, 63); 1360 efx_writeo(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0); 1361 } 1362 1363 if (boot_dev == FFE_AB_SPI_DEVICE_FLASH) 1364 falcon_spi_device_init(efx, &efx->spi_flash, 1365 FFE_AB_SPI_DEVICE_FLASH, 1366 default_flash_type); 1367 if (boot_dev == FFE_AB_SPI_DEVICE_EEPROM) 1368 falcon_spi_device_init(efx, &efx->spi_eeprom, 1369 FFE_AB_SPI_DEVICE_EEPROM, 1370 large_eeprom_type); 1371} 1372 1373static int falcon_probe_nic(struct efx_nic *efx) 1374{ 1375 struct falcon_nic_data *nic_data; 1376 struct falcon_board *board; 1377 int rc; 1378 1379 /* Allocate storage for hardware specific data */ 1380 nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL); 1381 if (!nic_data) 1382 return -ENOMEM; 1383 efx->nic_data = nic_data; 1384 1385 rc = -ENODEV; 1386 1387 if (efx_nic_fpga_ver(efx) != 0) { 1388 EFX_ERR(efx, "Falcon FPGA not supported\n"); 1389 goto fail1; 1390 } 1391 1392 if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) { 1393 efx_oword_t nic_stat; 1394 struct pci_dev *dev; 1395 u8 pci_rev = efx->pci_dev->revision; 1396 1397 if ((pci_rev == 0xff) || (pci_rev == 0)) { 1398 EFX_ERR(efx, "Falcon rev A0 not supported\n"); 1399 goto fail1; 1400 } 1401 efx_reado(efx, &nic_stat, FR_AB_NIC_STAT); 1402 if (EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_10G) == 0) { 1403 EFX_ERR(efx, "Falcon rev A1 1G not supported\n"); 1404 goto fail1; 1405 } 1406 if (EFX_OWORD_FIELD(nic_stat, FRF_AA_STRAP_PCIE) == 0) { 1407 EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n"); 1408 goto fail1; 1409 } 1410 1411 dev = pci_dev_get(efx->pci_dev); 1412 while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID, 1413 dev))) { 1414 if (dev->bus == efx->pci_dev->bus && 1415 dev->devfn == efx->pci_dev->devfn + 1) { 1416 nic_data->pci_dev2 = dev; 1417 break; 1418 } 1419 } 1420 if (!nic_data->pci_dev2) { 1421 EFX_ERR(efx, "failed to find secondary function\n"); 1422 rc = -ENODEV; 1423 goto fail2; 1424 } 1425 } 1426 1427 /* Now we can reset the NIC */ 1428 rc = falcon_reset_hw(efx, RESET_TYPE_ALL); 1429 if (rc) { 1430 EFX_ERR(efx, "failed to reset NIC\n"); 1431 goto fail3; 1432 } 1433 1434 /* Allocate memory for INT_KER */ 1435 rc = efx_nic_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t)); 1436 if (rc) 1437 goto fail4; 1438 BUG_ON(efx->irq_status.dma_addr & 0x0f); 1439 1440 EFX_LOG(efx, "INT_KER at %llx (virt %p phys %llx)\n", 1441 (u64)efx->irq_status.dma_addr, 1442 efx->irq_status.addr, (u64)virt_to_phys(efx->irq_status.addr)); 1443 1444 falcon_probe_spi_devices(efx); 1445 1446 /* Read in the non-volatile configuration */ 1447 rc = falcon_probe_nvconfig(efx); 1448 if (rc) 1449 goto fail5; 1450 1451 /* Initialise I2C adapter */ 1452 board = falcon_board(efx); 1453 board->i2c_adap.owner = THIS_MODULE; 1454 board->i2c_data = falcon_i2c_bit_operations; 1455 board->i2c_data.data = efx; 1456 board->i2c_adap.algo_data = &board->i2c_data; 1457 board->i2c_adap.dev.parent = &efx->pci_dev->dev; 1458 strlcpy(board->i2c_adap.name, "SFC4000 GPIO", 1459 sizeof(board->i2c_adap.name)); 1460 rc = i2c_bit_add_bus(&board->i2c_adap); 1461 if (rc) 1462 goto fail5; 1463 1464 rc = falcon_board(efx)->type->init(efx); 1465 if (rc) { 1466 EFX_ERR(efx, "failed to initialise board\n"); 1467 goto fail6; 1468 } 1469 1470 nic_data->stats_disable_count = 1; 1471 setup_timer(&nic_data->stats_timer, &falcon_stats_timer_func, 1472 (unsigned long)efx); 1473 1474 return 0; 1475 1476 fail6: 1477 BUG_ON(i2c_del_adapter(&board->i2c_adap)); 1478 memset(&board->i2c_adap, 0, sizeof(board->i2c_adap)); 1479 fail5: 1480 falcon_remove_spi_devices(efx); 1481 efx_nic_free_buffer(efx, &efx->irq_status); 1482 fail4: 1483 fail3: 1484 if (nic_data->pci_dev2) { 1485 pci_dev_put(nic_data->pci_dev2); 1486 nic_data->pci_dev2 = NULL; 1487 } 1488 fail2: 1489 fail1: 1490 kfree(efx->nic_data); 1491 return rc; 1492} 1493 1494static void falcon_init_rx_cfg(struct efx_nic *efx) 1495{ 1496 /* Prior to Siena the RX DMA engine will split each frame at 1497 * intervals of RX_USR_BUF_SIZE (32-byte units). We set it to 1498 * be so large that that never happens. */ 1499 const unsigned huge_buf_size = (3 * 4096) >> 5; 1500 /* RX control FIFO thresholds (32 entries) */ 1501 const unsigned ctrl_xon_thr = 20; 1502 const unsigned ctrl_xoff_thr = 25; 1503 /* RX data FIFO thresholds (256-byte units; size varies) */ 1504 int data_xon_thr = efx_nic_rx_xon_thresh >> 8; 1505 int data_xoff_thr = efx_nic_rx_xoff_thresh >> 8; 1506 efx_oword_t reg; 1507 1508 efx_reado(efx, &reg, FR_AZ_RX_CFG); 1509 if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) { 1510 /* Data FIFO size is 5.5K */ 1511 if (data_xon_thr < 0) 1512 data_xon_thr = 512 >> 8; 1513 if (data_xoff_thr < 0) 1514 data_xoff_thr = 2048 >> 8; 1515 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_DESC_PUSH_EN, 0); 1516 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_USR_BUF_SIZE, 1517 huge_buf_size); 1518 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_MAC_TH, data_xon_thr); 1519 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_MAC_TH, data_xoff_thr); 1520 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_TX_TH, ctrl_xon_thr); 1521 EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_TX_TH, ctrl_xoff_thr); 1522 } else { 1523 /* Data FIFO size is 80K; register fields moved */ 1524 if (data_xon_thr < 0) 1525 data_xon_thr = 27648 >> 8; /* ~3*max MTU */ 1526 if (data_xoff_thr < 0) 1527 data_xoff_thr = 54272 >> 8; /* ~80Kb - 3*max MTU */ 1528 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_DESC_PUSH_EN, 0); 1529 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_USR_BUF_SIZE, 1530 huge_buf_size); 1531 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_MAC_TH, data_xon_thr); 1532 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_MAC_TH, data_xoff_thr); 1533 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_TX_TH, ctrl_xon_thr); 1534 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_TX_TH, ctrl_xoff_thr); 1535 EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1); 1536 } 1537 /* Always enable XOFF signal from RX FIFO. We enable 1538 * or disable transmission of pause frames at the MAC. */ 1539 EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1); 1540 efx_writeo(efx, &reg, FR_AZ_RX_CFG); 1541} 1542 1543/* This call performs hardware-specific global initialisation, such as 1544 * defining the descriptor cache sizes and number of RSS channels. 1545 * It does not set up any buffers, descriptor rings or event queues. 1546 */ 1547static int falcon_init_nic(struct efx_nic *efx) 1548{ 1549 efx_oword_t temp; 1550 int rc; 1551 1552 /* Use on-chip SRAM */ 1553 efx_reado(efx, &temp, FR_AB_NIC_STAT); 1554 EFX_SET_OWORD_FIELD(temp, FRF_AB_ONCHIP_SRAM, 1); 1555 efx_writeo(efx, &temp, FR_AB_NIC_STAT); 1556 1557 /* Set the source of the GMAC clock */ 1558 if (efx_nic_rev(efx) == EFX_REV_FALCON_B0) { 1559 efx_reado(efx, &temp, FR_AB_GPIO_CTL); 1560 EFX_SET_OWORD_FIELD(temp, FRF_AB_USE_NIC_CLK, true); 1561 efx_writeo(efx, &temp, FR_AB_GPIO_CTL); 1562 } 1563 1564 /* Select the correct MAC */ 1565 falcon_clock_mac(efx); 1566 1567 rc = falcon_reset_sram(efx); 1568 if (rc) 1569 return rc; 1570 1571 /* Clear the parity enables on the TX data fifos as 1572 * they produce false parity errors because of timing issues 1573 */ 1574 if (EFX_WORKAROUND_5129(efx)) { 1575 efx_reado(efx, &temp, FR_AZ_CSR_SPARE); 1576 EFX_SET_OWORD_FIELD(temp, FRF_AB_MEM_PERR_EN_TX_DATA, 0); 1577 efx_writeo(efx, &temp, FR_AZ_CSR_SPARE); 1578 } 1579 1580 if (EFX_WORKAROUND_7244(efx)) { 1581 efx_reado(efx, &temp, FR_BZ_RX_FILTER_CTL); 1582 EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_FULL_SRCH_LIMIT, 8); 1583 EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_WILD_SRCH_LIMIT, 8); 1584 EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_FULL_SRCH_LIMIT, 8); 1585 EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_WILD_SRCH_LIMIT, 8); 1586 efx_writeo(efx, &temp, FR_BZ_RX_FILTER_CTL); 1587 } 1588 1589 /* XXX This is documented only for Falcon A0/A1 */ 1590 /* Setup RX. Wait for descriptor is broken and must 1591 * be disabled. RXDP recovery shouldn't be needed, but is. 1592 */ 1593 efx_reado(efx, &temp, FR_AA_RX_SELF_RST); 1594 EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_NODESC_WAIT_DIS, 1); 1595 EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_SELF_RST_EN, 1); 1596 if (EFX_WORKAROUND_5583(efx)) 1597 EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_ISCSI_DIS, 1); 1598 efx_writeo(efx, &temp, FR_AA_RX_SELF_RST); 1599 1600 /* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16 1601 * descriptors (which is bad). 1602 */ 1603 efx_reado(efx, &temp, FR_AZ_TX_CFG); 1604 EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_NO_EOP_DISC_EN, 0); 1605 efx_writeo(efx, &temp, FR_AZ_TX_CFG); 1606 1607 falcon_init_rx_cfg(efx); 1608 1609 /* Set destination of both TX and RX Flush events */ 1610 if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) { 1611 EFX_POPULATE_OWORD_1(temp, FRF_BZ_FLS_EVQ_ID, 0); 1612 efx_writeo(efx, &temp, FR_BZ_DP_CTRL); 1613 } 1614 1615 efx_nic_init_common(efx); 1616 1617 return 0; 1618} 1619 1620static void falcon_remove_nic(struct efx_nic *efx) 1621{ 1622 struct falcon_nic_data *nic_data = efx->nic_data; 1623 struct falcon_board *board = falcon_board(efx); 1624 int rc; 1625 1626 board->type->fini(efx); 1627 1628 /* Remove I2C adapter and clear it in preparation for a retry */ 1629 rc = i2c_del_adapter(&board->i2c_adap); 1630 BUG_ON(rc); 1631 memset(&board->i2c_adap, 0, sizeof(board->i2c_adap)); 1632 1633 falcon_remove_spi_devices(efx); 1634 efx_nic_free_buffer(efx, &efx->irq_status); 1635 1636 falcon_reset_hw(efx, RESET_TYPE_ALL); 1637 1638 /* Release the second function after the reset */ 1639 if (nic_data->pci_dev2) { 1640 pci_dev_put(nic_data->pci_dev2); 1641 nic_data->pci_dev2 = NULL; 1642 } 1643 1644 /* Tear down the private nic state */ 1645 kfree(efx->nic_data); 1646 efx->nic_data = NULL; 1647} 1648 1649static void falcon_update_nic_stats(struct efx_nic *efx) 1650{ 1651 struct falcon_nic_data *nic_data = efx->nic_data; 1652 efx_oword_t cnt; 1653 1654 if (nic_data->stats_disable_count) 1655 return; 1656 1657 efx_reado(efx, &cnt, FR_AZ_RX_NODESC_DROP); 1658 efx->n_rx_nodesc_drop_cnt += 1659 EFX_OWORD_FIELD(cnt, FRF_AB_RX_NODESC_DROP_CNT); 1660 1661 if (nic_data->stats_pending && 1662 *nic_data->stats_dma_done == FALCON_STATS_DONE) { 1663 nic_data->stats_pending = false; 1664 rmb(); /* read the done flag before the stats */ 1665 efx->mac_op->update_stats(efx); 1666 } 1667} 1668 1669void falcon_start_nic_stats(struct efx_nic *efx) 1670{ 1671 struct falcon_nic_data *nic_data = efx->nic_data; 1672 1673 spin_lock_bh(&efx->stats_lock); 1674 if (--nic_data->stats_disable_count == 0) 1675 falcon_stats_request(efx); 1676 spin_unlock_bh(&efx->stats_lock); 1677} 1678 1679void falcon_stop_nic_stats(struct efx_nic *efx) 1680{ 1681 struct falcon_nic_data *nic_data = efx->nic_data; 1682 int i; 1683 1684 might_sleep(); 1685 1686 spin_lock_bh(&efx->stats_lock); 1687 ++nic_data->stats_disable_count; 1688 spin_unlock_bh(&efx->stats_lock); 1689 1690 del_timer_sync(&nic_data->stats_timer); 1691 1692 /* Wait enough time for the most recent transfer to 1693 * complete. */ 1694 for (i = 0; i < 4 && nic_data->stats_pending; i++) { 1695 if (*nic_data->stats_dma_done == FALCON_STATS_DONE) 1696 break; 1697 msleep(1); 1698 } 1699 1700 spin_lock_bh(&efx->stats_lock); 1701 falcon_stats_complete(efx); 1702 spin_unlock_bh(&efx->stats_lock); 1703} 1704 1705static void falcon_set_id_led(struct efx_nic *efx, enum efx_led_mode mode) 1706{ 1707 falcon_board(efx)->type->set_id_led(efx, mode); 1708} 1709 1710/************************************************************************** 1711 * 1712 * Wake on LAN 1713 * 1714 ************************************************************************** 1715 */ 1716 1717static void falcon_get_wol(struct efx_nic *efx, struct ethtool_wolinfo *wol) 1718{ 1719 wol->supported = 0; 1720 wol->wolopts = 0; 1721 memset(&wol->sopass, 0, sizeof(wol->sopass)); 1722} 1723 1724static int falcon_set_wol(struct efx_nic *efx, u32 type) 1725{ 1726 if (type != 0) 1727 return -EINVAL; 1728 return 0; 1729} 1730 1731/************************************************************************** 1732 * 1733 * Revision-dependent attributes used by efx.c and nic.c 1734 * 1735 ************************************************************************** 1736 */ 1737 1738struct efx_nic_type falcon_a1_nic_type = { 1739 .probe = falcon_probe_nic, 1740 .remove = falcon_remove_nic, 1741 .init = falcon_init_nic, 1742 .fini = efx_port_dummy_op_void, 1743 .monitor = falcon_monitor, 1744 .reset = falcon_reset_hw, 1745 .probe_port = falcon_probe_port, 1746 .remove_port = falcon_remove_port, 1747 .prepare_flush = falcon_prepare_flush, 1748 .update_stats = falcon_update_nic_stats, 1749 .start_stats = falcon_start_nic_stats, 1750 .stop_stats = falcon_stop_nic_stats, 1751 .set_id_led = falcon_set_id_led, 1752 .push_irq_moderation = falcon_push_irq_moderation, 1753 .push_multicast_hash = falcon_push_multicast_hash, 1754 .reconfigure_port = falcon_reconfigure_port, 1755 .get_wol = falcon_get_wol, 1756 .set_wol = falcon_set_wol, 1757 .resume_wol = efx_port_dummy_op_void, 1758 .test_nvram = falcon_test_nvram, 1759 .default_mac_ops = &falcon_xmac_operations, 1760 1761 .revision = EFX_REV_FALCON_A1, 1762 .mem_map_size = 0x20000, 1763 .txd_ptr_tbl_base = FR_AA_TX_DESC_PTR_TBL_KER, 1764 .rxd_ptr_tbl_base = FR_AA_RX_DESC_PTR_TBL_KER, 1765 .buf_tbl_base = FR_AA_BUF_FULL_TBL_KER, 1766 .evq_ptr_tbl_base = FR_AA_EVQ_PTR_TBL_KER, 1767 .evq_rptr_tbl_base = FR_AA_EVQ_RPTR_KER, 1768 .max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH), 1769 .rx_buffer_padding = 0x24, 1770 .max_interrupt_mode = EFX_INT_MODE_MSI, 1771 .phys_addr_channels = 4, 1772 .tx_dc_base = 0x130000, 1773 .rx_dc_base = 0x100000, 1774 .offload_features = NETIF_F_IP_CSUM, 1775 .reset_world_flags = ETH_RESET_IRQ, 1776}; 1777 1778struct efx_nic_type falcon_b0_nic_type = { 1779 .probe = falcon_probe_nic, 1780 .remove = falcon_remove_nic, 1781 .init = falcon_init_nic, 1782 .fini = efx_port_dummy_op_void, 1783 .monitor = falcon_monitor, 1784 .reset = falcon_reset_hw, 1785 .probe_port = falcon_probe_port, 1786 .remove_port = falcon_remove_port, 1787 .prepare_flush = falcon_prepare_flush, 1788 .update_stats = falcon_update_nic_stats, 1789 .start_stats = falcon_start_nic_stats, 1790 .stop_stats = falcon_stop_nic_stats, 1791 .set_id_led = falcon_set_id_led, 1792 .push_irq_moderation = falcon_push_irq_moderation, 1793 .push_multicast_hash = falcon_push_multicast_hash, 1794 .reconfigure_port = falcon_reconfigure_port, 1795 .get_wol = falcon_get_wol, 1796 .set_wol = falcon_set_wol, 1797 .resume_wol = efx_port_dummy_op_void, 1798 .test_registers = falcon_b0_test_registers, 1799 .test_nvram = falcon_test_nvram, 1800 .default_mac_ops = &falcon_xmac_operations, 1801 1802 .revision = EFX_REV_FALCON_B0, 1803 /* Map everything up to and including the RSS indirection 1804 * table. Don't map MSI-X table, MSI-X PBA since Linux 1805 * requires that they not be mapped. */ 1806 .mem_map_size = (FR_BZ_RX_INDIRECTION_TBL + 1807 FR_BZ_RX_INDIRECTION_TBL_STEP * 1808 FR_BZ_RX_INDIRECTION_TBL_ROWS), 1809 .txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL, 1810 .rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL, 1811 .buf_tbl_base = FR_BZ_BUF_FULL_TBL, 1812 .evq_ptr_tbl_base = FR_BZ_EVQ_PTR_TBL, 1813 .evq_rptr_tbl_base = FR_BZ_EVQ_RPTR, 1814 .max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH), 1815 .rx_buffer_padding = 0, 1816 .max_interrupt_mode = EFX_INT_MODE_MSIX, 1817 .phys_addr_channels = 32, /* Hardware limit is 64, but the legacy 1818 * interrupt handler only supports 32 1819 * channels */ 1820 .tx_dc_base = 0x130000, 1821 .rx_dc_base = 0x100000, 1822 .offload_features = NETIF_F_IP_CSUM, 1823 .reset_world_flags = ETH_RESET_IRQ, 1824}; 1825