tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#
2# Touchscreen driver configuration
3#
4menuconfig INPUT_TOUCHSCREEN
5 bool "Touchscreens"
6 help
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
9
10 If unsure, say Y.
11
12if INPUT_TOUCHSCREEN
13
14config TOUCHSCREEN_ADS7846
15 tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
16 depends on SPI_MASTER
17 depends on HWMON = n || HWMON
18 help
19 Say Y here if you have a touchscreen interface using the
20 ADS7846/TSC2046 or ADS7843 controller, and your board-specific
21 setup code includes that in its table of SPI devices.
22
23 If HWMON is selected, and the driver is told the reference voltage
24 on your board, you will also get hwmon interfaces for the voltage
25 (and on ads7846/tsc2046, temperature) sensors of this chip.
26
27 If unsure, say N (but it's safe to say "Y").
28
29 To compile this driver as a module, choose M here: the
30 module will be called ads7846.
31
32config TOUCHSCREEN_AD7877
33 tristate "AD7877 based touchscreens"
34 depends on SPI_MASTER
35 help
36 Say Y here if you have a touchscreen interface using the
37 AD7877 controller, and your board-specific initialization
38 code includes that in its table of SPI devices.
39
40 If unsure, say N (but it's safe to say "Y").
41
42 To compile this driver as a module, choose M here: the
43 module will be called ad7877.
44
45config TOUCHSCREEN_AD7879_I2C
46 tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
47 depends on I2C
48 select TOUCHSCREEN_AD7879
49 help
50 Say Y here if you have a touchscreen interface using the
51 AD7879-1 controller, and your board-specific initialization
52 code includes that in its table of I2C devices.
53
54 If unsure, say N (but it's safe to say "Y").
55
56 To compile this driver as a module, choose M here: the
57 module will be called ad7879.
58
59config TOUCHSCREEN_AD7879_SPI
60 tristate "AD7879 based touchscreens: AD7879 SPI Interface"
61 depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
62 select TOUCHSCREEN_AD7879
63 help
64 Say Y here if you have a touchscreen interface using the
65 AD7879 controller, and your board-specific initialization
66 code includes that in its table of SPI devices.
67
68 If unsure, say N (but it's safe to say "Y").
69
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
72
73config TOUCHSCREEN_AD7879
74 tristate
75 default n
76
77config TOUCHSCREEN_BITSY
78 tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
79 depends on SA1100_BITSY
80 select SERIO
81 help
82 Say Y here if you have the h3600 (Bitsy) touchscreen.
83
84 If unsure, say N.
85
86 To compile this driver as a module, choose M here: the
87 module will be called h3600_ts_input.
88
89config TOUCHSCREEN_CORGI
90 tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
91 depends on PXA_SHARPSL
92 select CORGI_SSP_DEPRECATED
93 default y
94 help
95 Say Y here to enable the driver for the touchscreen on the
96 Sharp SL-C7xx and SL-Cxx00 series of PDAs.
97
98 If unsure, say N.
99
100 To compile this driver as a module, choose M here: the
101 module will be called corgi_ts.
102
103 NOTE: this driver is deprecated, try enable SPI and generic
104 ADS7846-based touchscreen driver.
105
106config TOUCHSCREEN_DA9034
107 tristate "Touchscreen support for Dialog Semiconductor DA9034"
108 depends on PMIC_DA903X
109 default y
110 help
111 Say Y here to enable the support for the touchscreen found
112 on Dialog Semiconductor DA9034 PMIC.
113
114config TOUCHSCREEN_EETI
115 tristate "EETI touchscreen panel support"
116 depends on I2C
117 help
118 Say Y here to enable support for I2C connected EETI touch panels.
119
120 To compile this driver as a module, choose M here: the
121 module will be called eeti_ts.
122
123config TOUCHSCREEN_FUJITSU
124 tristate "Fujitsu serial touchscreen"
125 select SERIO
126 help
127 Say Y here if you have the Fujitsu touchscreen (such as one
128 installed in Lifebook P series laptop) connected to your
129 system.
130
131 If unsure, say N.
132
133 To compile this driver as a module, choose M here: the
134 module will be called fujitsu-ts.
135
136config TOUCHSCREEN_GUNZE
137 tristate "Gunze AHL-51S touchscreen"
138 select SERIO
139 help
140 Say Y here if you have the Gunze AHL-51 touchscreen connected to
141 your system.
142
143 If unsure, say N.
144
145 To compile this driver as a module, choose M here: the
146 module will be called gunze.
147
148config TOUCHSCREEN_ELO
149 tristate "Elo serial touchscreens"
150 select SERIO
151 help
152 Say Y here if you have an Elo serial touchscreen connected to
153 your system.
154
155 If unsure, say N.
156
157 To compile this driver as a module, choose M here: the
158 module will be called elo.
159
160config TOUCHSCREEN_WACOM_W8001
161 tristate "Wacom W8001 penabled serial touchscreen"
162 select SERIO
163 help
164 Say Y here if you have an Wacom W8001 penabled serial touchscreen
165 connected to your system.
166
167 If unsure, say N.
168
169 To compile this driver as a module, choose M here: the
170 module will be called wacom_w8001.
171
172
173config TOUCHSCREEN_MTOUCH
174 tristate "MicroTouch serial touchscreens"
175 select SERIO
176 help
177 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
178 your system.
179
180 If unsure, say N.
181
182 To compile this driver as a module, choose M here: the
183 module will be called mtouch.
184
185config TOUCHSCREEN_INEXIO
186 tristate "iNexio serial touchscreens"
187 select SERIO
188 help
189 Say Y here if you have an iNexio serial touchscreen connected to
190 your system.
191
192 If unsure, say N.
193
194 To compile this driver as a module, choose M here: the
195 module will be called inexio.
196
197config TOUCHSCREEN_MK712
198 tristate "ICS MicroClock MK712 touchscreen"
199 help
200 Say Y here if you have the ICS MicroClock MK712 touchscreen
201 controller chip in your system.
202
203 If unsure, say N.
204
205 To compile this driver as a module, choose M here: the
206 module will be called mk712.
207
208config TOUCHSCREEN_HP600
209 tristate "HP Jornada 6xx touchscreen"
210 depends on SH_HP6XX && SH_ADC
211 help
212 Say Y here if you have a HP Jornada 620/660/680/690 and want to
213 support the built-in touchscreen.
214
215 To compile this driver as a module, choose M here: the
216 module will be called hp680_ts_input.
217
218config TOUCHSCREEN_HP7XX
219 tristate "HP Jornada 7xx touchscreen"
220 depends on SA1100_JORNADA720_SSP
221 help
222 Say Y here if you have a HP Jornada 710/720/728 and want
223 to support the built-in touchscreen.
224
225 To compile this driver as a module, choose M here: the
226 module will be called jornada720_ts.
227
228config TOUCHSCREEN_HTCPEN
229 tristate "HTC Shift X9500 touchscreen"
230 depends on ISA
231 help
232 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
233 Clio / Shangrila and want to support the built-in touchscreen.
234
235 If unsure, say N.
236
237 To compile this driver as a module, choose M here: the
238 module will be called htcpen.
239
240config TOUCHSCREEN_PENMOUNT
241 tristate "Penmount serial touchscreen"
242 select SERIO
243 help
244 Say Y here if you have a Penmount serial touchscreen connected to
245 your system.
246
247 If unsure, say N.
248
249 To compile this driver as a module, choose M here: the
250 module will be called penmount.
251
252config TOUCHSCREEN_MIGOR
253 tristate "Renesas MIGO-R touchscreen"
254 depends on SH_MIGOR && I2C
255 help
256 Say Y here to enable MIGO-R touchscreen support.
257
258 If unsure, say N.
259
260 To compile this driver as a module, choose M here: the
261 module will be called migor_ts.
262
263config TOUCHSCREEN_TOUCHRIGHT
264 tristate "Touchright serial touchscreen"
265 select SERIO
266 help
267 Say Y here if you have a Touchright serial touchscreen connected to
268 your system.
269
270 If unsure, say N.
271
272 To compile this driver as a module, choose M here: the
273 module will be called touchright.
274
275config TOUCHSCREEN_TOUCHWIN
276 tristate "Touchwin serial touchscreen"
277 select SERIO
278 help
279 Say Y here if you have a Touchwin serial touchscreen connected to
280 your system.
281
282 If unsure, say N.
283
284 To compile this driver as a module, choose M here: the
285 module will be called touchwin.
286
287config TOUCHSCREEN_ATMEL_TSADCC
288 tristate "Atmel Touchscreen Interface"
289 depends on ARCH_AT91SAM9RL
290 help
291 Say Y here if you have a 4-wire touchscreen connected to the
292 ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
293
294 If unsure, say N.
295
296 To compile this driver as a module, choose M here: the
297 module will be called atmel_tsadcc.
298
299config TOUCHSCREEN_UCB1400
300 tristate "Philips UCB1400 touchscreen"
301 depends on AC97_BUS
302 depends on UCB1400_CORE
303 help
304 This enables support for the Philips UCB1400 touchscreen interface.
305 The UCB1400 is an AC97 audio codec. The touchscreen interface
306 will be initialized only after the ALSA subsystem has been
307 brought up and the UCB1400 detected. You therefore have to
308 configure ALSA support as well (either built-in or modular,
309 independently of whether this driver is itself built-in or
310 modular) for this driver to work.
311
312 To compile this driver as a module, choose M here: the
313 module will be called ucb1400_ts.
314
315config TOUCHSCREEN_WM97XX
316 tristate "Support for WM97xx AC97 touchscreen controllers"
317 depends on AC97_BUS
318 help
319 Say Y here if you have a Wolfson Microelectronics WM97xx
320 touchscreen connected to your system. Note that this option
321 only enables core driver, you will also need to select
322 support for appropriate chip below.
323
324 If unsure, say N.
325
326 To compile this driver as a module, choose M here: the
327 module will be called wm97xx-ts.
328
329config TOUCHSCREEN_WM9705
330 bool "WM9705 Touchscreen interface support"
331 depends on TOUCHSCREEN_WM97XX
332 default y
333 help
334 Say Y here to enable support for the Wolfson Microelectronics
335 WM9705 touchscreen controller.
336
337config TOUCHSCREEN_WM9712
338 bool "WM9712 Touchscreen interface support"
339 depends on TOUCHSCREEN_WM97XX
340 default y
341 help
342 Say Y here to enable support for the Wolfson Microelectronics
343 WM9712 touchscreen controller.
344
345config TOUCHSCREEN_WM9713
346 bool "WM9713 Touchscreen interface support"
347 depends on TOUCHSCREEN_WM97XX
348 default y
349 help
350 Say Y here to enable support for the Wolfson Microelectronics
351 WM9713 touchscreen controller.
352
353config TOUCHSCREEN_WM97XX_ATMEL
354 tristate "WM97xx Atmel accelerated touch"
355 depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
356 help
357 Say Y here for support for streaming mode with WM97xx touchscreens
358 on Atmel AT91 or AVR32 systems with an AC97C module.
359
360 Be aware that this will use channel B in the controller for
361 streaming data, this must not conflict with other AC97C drivers.
362
363 If unsure, say N.
364
365 To compile this driver as a module, choose M here: the module will
366 be called atmel-wm97xx.
367
368config TOUCHSCREEN_WM97XX_MAINSTONE
369 tristate "WM97xx Mainstone accelerated touch"
370 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
371 help
372 Say Y here for support for streaming mode with WM97xx touchscreens
373 on Mainstone systems.
374
375 If unsure, say N.
376
377 To compile this driver as a module, choose M here: the
378 module will be called mainstone-wm97xx.
379
380config TOUCHSCREEN_WM97XX_ZYLONITE
381 tristate "Zylonite accelerated touch"
382 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
383 select TOUCHSCREEN_WM9713
384 help
385 Say Y here for support for streaming mode with the touchscreen
386 on Zylonite systems.
387
388 If unsure, say N.
389
390 To compile this driver as a module, choose M here: the
391 module will be called zylonite-wm97xx.
392
393config TOUCHSCREEN_USB_COMPOSITE
394 tristate "USB Touchscreen Driver"
395 depends on USB_ARCH_HAS_HCD
396 select USB
397 help
398 USB Touchscreen driver for:
399 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
400 - PanJit TouchSet USB
401 - 3M MicroTouch USB (EX II series)
402 - ITM
403 - some other eTurboTouch
404 - Gunze AHL61
405 - DMC TSC-10/25
406 - IRTOUCHSYSTEMS/UNITOP
407 - IdealTEK URTC1000
408 - GoTop Super_Q2/GogoPen/PenPower tablets
409
410 Have a look at <http://linux.chapter7.ch/touchkit/> for
411 a usage description and the required user-space stuff.
412
413 To compile this driver as a module, choose M here: the
414 module will be called usbtouchscreen.
415
416config TOUCHSCREEN_USB_EGALAX
417 default y
418 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
419 depends on TOUCHSCREEN_USB_COMPOSITE
420
421config TOUCHSCREEN_USB_PANJIT
422 default y
423 bool "PanJit device support" if EMBEDDED
424 depends on TOUCHSCREEN_USB_COMPOSITE
425
426config TOUCHSCREEN_USB_3M
427 default y
428 bool "3M/Microtouch EX II series device support" if EMBEDDED
429 depends on TOUCHSCREEN_USB_COMPOSITE
430
431config TOUCHSCREEN_USB_ITM
432 default y
433 bool "ITM device support" if EMBEDDED
434 depends on TOUCHSCREEN_USB_COMPOSITE
435
436config TOUCHSCREEN_USB_ETURBO
437 default y
438 bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
439 depends on TOUCHSCREEN_USB_COMPOSITE
440
441config TOUCHSCREEN_USB_GUNZE
442 default y
443 bool "Gunze AHL61 device support" if EMBEDDED
444 depends on TOUCHSCREEN_USB_COMPOSITE
445
446config TOUCHSCREEN_USB_DMC_TSC10
447 default y
448 bool "DMC TSC-10/25 device support" if EMBEDDED
449 depends on TOUCHSCREEN_USB_COMPOSITE
450
451config TOUCHSCREEN_USB_IRTOUCH
452 default y
453 bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
454 depends on TOUCHSCREEN_USB_COMPOSITE
455
456config TOUCHSCREEN_USB_IDEALTEK
457 default y
458 bool "IdealTEK URTC1000 device support" if EMBEDDED
459 depends on TOUCHSCREEN_USB_COMPOSITE
460
461config TOUCHSCREEN_USB_GENERAL_TOUCH
462 default y
463 bool "GeneralTouch Touchscreen device support" if EMBEDDED
464 depends on TOUCHSCREEN_USB_COMPOSITE
465
466config TOUCHSCREEN_USB_GOTOP
467 default y
468 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
469 depends on TOUCHSCREEN_USB_COMPOSITE
470
471config TOUCHSCREEN_TOUCHIT213
472 tristate "Sahara TouchIT-213 touchscreen"
473 select SERIO
474 help
475 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
476
477 If unsure, say N.
478
479 To compile this driver as a module, choose M here: the
480 module will be called touchit213.
481
482config TOUCHSCREEN_TSC2007
483 tristate "TSC2007 based touchscreens"
484 depends on I2C
485 help
486 Say Y here if you have a TSC2007 based touchscreen.
487
488 If unsure, say N.
489
490 To compile this driver as a module, choose M here: the
491 module will be called tsc2007.
492
493config TOUCHSCREEN_W90X900
494 tristate "W90P910 touchscreen driver"
495 help
496 Say Y here if you have a W90P910 based touchscreen.
497
498 To compile this driver as a module, choose M here: the
499 module will be called w90p910_ts.
500
501endif