tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * Microchip ENC28J60 ethernet driver (MAC + PHY)
3 *
4 * Copyright (C) 2007 Eurek srl
5 * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
6 * based on enc28j60.c written by David Anders for 2.4 kernel version
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
14 */
15
16#include <linux/module.h>
17#include <linux/kernel.h>
18#include <linux/types.h>
19#include <linux/fcntl.h>
20#include <linux/interrupt.h>
21#include <linux/slab.h>
22#include <linux/string.h>
23#include <linux/errno.h>
24#include <linux/init.h>
25#include <linux/netdevice.h>
26#include <linux/etherdevice.h>
27#include <linux/ethtool.h>
28#include <linux/tcp.h>
29#include <linux/skbuff.h>
30#include <linux/delay.h>
31#include <linux/spi/spi.h>
32
33#include "enc28j60_hw.h"
34
35#define DRV_NAME "enc28j60"
36#define DRV_VERSION "1.01"
37
38#define SPI_OPLEN 1
39
40#define ENC28J60_MSG_DEFAULT \
41 (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
42
43/* Buffer size required for the largest SPI transfer (i.e., reading a
44 * frame). */
45#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
46
47#define TX_TIMEOUT (4 * HZ)
48
49/* Max TX retries in case of collision as suggested by errata datasheet */
50#define MAX_TX_RETRYCOUNT 16
51
52enum {
53 RXFILTER_NORMAL,
54 RXFILTER_MULTI,
55 RXFILTER_PROMISC
56};
57
58/* Driver local data */
59struct enc28j60_net {
60 struct net_device *netdev;
61 struct spi_device *spi;
62 struct mutex lock;
63 struct sk_buff *tx_skb;
64 struct work_struct tx_work;
65 struct work_struct irq_work;
66 struct work_struct setrx_work;
67 struct work_struct restart_work;
68 u8 bank; /* current register bank selected */
69 u16 next_pk_ptr; /* next packet pointer within FIFO */
70 u16 max_pk_counter; /* statistics: max packet counter */
71 u16 tx_retry_count;
72 bool hw_enable;
73 bool full_duplex;
74 int rxfilter;
75 u32 msg_enable;
76 u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
77};
78
79/* use ethtool to change the level for any given device */
80static struct {
81 u32 msg_enable;
82} debug = { -1 };
83
84/*
85 * SPI read buffer
86 * wait for the SPI transfer and copy received data to destination
87 */
88static int
89spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
90{
91 u8 *rx_buf = priv->spi_transfer_buf + 4;
92 u8 *tx_buf = priv->spi_transfer_buf;
93 struct spi_transfer t = {
94 .tx_buf = tx_buf,
95 .rx_buf = rx_buf,
96 .len = SPI_OPLEN + len,
97 };
98 struct spi_message msg;
99 int ret;
100
101 tx_buf[0] = ENC28J60_READ_BUF_MEM;
102 tx_buf[1] = tx_buf[2] = tx_buf[3] = 0; /* don't care */
103
104 spi_message_init(&msg);
105 spi_message_add_tail(&t, &msg);
106 ret = spi_sync(priv->spi, &msg);
107 if (ret == 0) {
108 memcpy(data, &rx_buf[SPI_OPLEN], len);
109 ret = msg.status;
110 }
111 if (ret && netif_msg_drv(priv))
112 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
113 __func__, ret);
114
115 return ret;
116}
117
118/*
119 * SPI write buffer
120 */
121static int spi_write_buf(struct enc28j60_net *priv, int len,
122 const u8 *data)
123{
124 int ret;
125
126 if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
127 ret = -EINVAL;
128 else {
129 priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
130 memcpy(&priv->spi_transfer_buf[1], data, len);
131 ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
132 if (ret && netif_msg_drv(priv))
133 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
134 __func__, ret);
135 }
136 return ret;
137}
138
139/*
140 * basic SPI read operation
141 */
142static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
143 u8 addr)
144{
145 u8 tx_buf[2];
146 u8 rx_buf[4];
147 u8 val = 0;
148 int ret;
149 int slen = SPI_OPLEN;
150
151 /* do dummy read if needed */
152 if (addr & SPRD_MASK)
153 slen++;
154
155 tx_buf[0] = op | (addr & ADDR_MASK);
156 ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
157 if (ret)
158 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
159 __func__, ret);
160 else
161 val = rx_buf[slen - 1];
162
163 return val;
164}
165
166/*
167 * basic SPI write operation
168 */
169static int spi_write_op(struct enc28j60_net *priv, u8 op,
170 u8 addr, u8 val)
171{
172 int ret;
173
174 priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
175 priv->spi_transfer_buf[1] = val;
176 ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
177 if (ret && netif_msg_drv(priv))
178 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
179 __func__, ret);
180 return ret;
181}
182
183static void enc28j60_soft_reset(struct enc28j60_net *priv)
184{
185 if (netif_msg_hw(priv))
186 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
187
188 spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
189 /* Errata workaround #1, CLKRDY check is unreliable,
190 * delay at least 1 mS instead */
191 udelay(2000);
192}
193
194/*
195 * select the current register bank if necessary
196 */
197static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
198{
199 u8 b = (addr & BANK_MASK) >> 5;
200
201 /* These registers (EIE, EIR, ESTAT, ECON2, ECON1)
202 * are present in all banks, no need to switch bank
203 */
204 if (addr >= EIE && addr <= ECON1)
205 return;
206
207 /* Clear or set each bank selection bit as needed */
208 if ((b & ECON1_BSEL0) != (priv->bank & ECON1_BSEL0)) {
209 if (b & ECON1_BSEL0)
210 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
211 ECON1_BSEL0);
212 else
213 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
214 ECON1_BSEL0);
215 }
216 if ((b & ECON1_BSEL1) != (priv->bank & ECON1_BSEL1)) {
217 if (b & ECON1_BSEL1)
218 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
219 ECON1_BSEL1);
220 else
221 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
222 ECON1_BSEL1);
223 }
224 priv->bank = b;
225}
226
227/*
228 * Register access routines through the SPI bus.
229 * Every register access comes in two flavours:
230 * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
231 * atomically more than one register
232 * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
233 *
234 * Some registers can be accessed through the bit field clear and
235 * bit field set to avoid a read modify write cycle.
236 */
237
238/*
239 * Register bit field Set
240 */
241static void nolock_reg_bfset(struct enc28j60_net *priv,
242 u8 addr, u8 mask)
243{
244 enc28j60_set_bank(priv, addr);
245 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
246}
247
248static void locked_reg_bfset(struct enc28j60_net *priv,
249 u8 addr, u8 mask)
250{
251 mutex_lock(&priv->lock);
252 nolock_reg_bfset(priv, addr, mask);
253 mutex_unlock(&priv->lock);
254}
255
256/*
257 * Register bit field Clear
258 */
259static void nolock_reg_bfclr(struct enc28j60_net *priv,
260 u8 addr, u8 mask)
261{
262 enc28j60_set_bank(priv, addr);
263 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
264}
265
266static void locked_reg_bfclr(struct enc28j60_net *priv,
267 u8 addr, u8 mask)
268{
269 mutex_lock(&priv->lock);
270 nolock_reg_bfclr(priv, addr, mask);
271 mutex_unlock(&priv->lock);
272}
273
274/*
275 * Register byte read
276 */
277static int nolock_regb_read(struct enc28j60_net *priv,
278 u8 address)
279{
280 enc28j60_set_bank(priv, address);
281 return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
282}
283
284static int locked_regb_read(struct enc28j60_net *priv,
285 u8 address)
286{
287 int ret;
288
289 mutex_lock(&priv->lock);
290 ret = nolock_regb_read(priv, address);
291 mutex_unlock(&priv->lock);
292
293 return ret;
294}
295
296/*
297 * Register word read
298 */
299static int nolock_regw_read(struct enc28j60_net *priv,
300 u8 address)
301{
302 int rl, rh;
303
304 enc28j60_set_bank(priv, address);
305 rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
306 rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
307
308 return (rh << 8) | rl;
309}
310
311static int locked_regw_read(struct enc28j60_net *priv,
312 u8 address)
313{
314 int ret;
315
316 mutex_lock(&priv->lock);
317 ret = nolock_regw_read(priv, address);
318 mutex_unlock(&priv->lock);
319
320 return ret;
321}
322
323/*
324 * Register byte write
325 */
326static void nolock_regb_write(struct enc28j60_net *priv,
327 u8 address, u8 data)
328{
329 enc28j60_set_bank(priv, address);
330 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
331}
332
333static void locked_regb_write(struct enc28j60_net *priv,
334 u8 address, u8 data)
335{
336 mutex_lock(&priv->lock);
337 nolock_regb_write(priv, address, data);
338 mutex_unlock(&priv->lock);
339}
340
341/*
342 * Register word write
343 */
344static void nolock_regw_write(struct enc28j60_net *priv,
345 u8 address, u16 data)
346{
347 enc28j60_set_bank(priv, address);
348 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
349 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
350 (u8) (data >> 8));
351}
352
353static void locked_regw_write(struct enc28j60_net *priv,
354 u8 address, u16 data)
355{
356 mutex_lock(&priv->lock);
357 nolock_regw_write(priv, address, data);
358 mutex_unlock(&priv->lock);
359}
360
361/*
362 * Buffer memory read
363 * Select the starting address and execute a SPI buffer read
364 */
365static void enc28j60_mem_read(struct enc28j60_net *priv,
366 u16 addr, int len, u8 *data)
367{
368 mutex_lock(&priv->lock);
369 nolock_regw_write(priv, ERDPTL, addr);
370#ifdef CONFIG_ENC28J60_WRITEVERIFY
371 if (netif_msg_drv(priv)) {
372 u16 reg;
373 reg = nolock_regw_read(priv, ERDPTL);
374 if (reg != addr)
375 printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
376 "(0x%04x - 0x%04x)\n", __func__, reg, addr);
377 }
378#endif
379 spi_read_buf(priv, len, data);
380 mutex_unlock(&priv->lock);
381}
382
383/*
384 * Write packet to enc28j60 TX buffer memory
385 */
386static void
387enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
388{
389 mutex_lock(&priv->lock);
390 /* Set the write pointer to start of transmit buffer area */
391 nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
392#ifdef CONFIG_ENC28J60_WRITEVERIFY
393 if (netif_msg_drv(priv)) {
394 u16 reg;
395 reg = nolock_regw_read(priv, EWRPTL);
396 if (reg != TXSTART_INIT)
397 printk(KERN_DEBUG DRV_NAME
398 ": %s() ERWPT:0x%04x != 0x%04x\n",
399 __func__, reg, TXSTART_INIT);
400 }
401#endif
402 /* Set the TXND pointer to correspond to the packet size given */
403 nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
404 /* write per-packet control byte */
405 spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
406 if (netif_msg_hw(priv))
407 printk(KERN_DEBUG DRV_NAME
408 ": %s() after control byte ERWPT:0x%04x\n",
409 __func__, nolock_regw_read(priv, EWRPTL));
410 /* copy the packet into the transmit buffer */
411 spi_write_buf(priv, len, data);
412 if (netif_msg_hw(priv))
413 printk(KERN_DEBUG DRV_NAME
414 ": %s() after write packet ERWPT:0x%04x, len=%d\n",
415 __func__, nolock_regw_read(priv, EWRPTL), len);
416 mutex_unlock(&priv->lock);
417}
418
419static unsigned long msec20_to_jiffies;
420
421static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
422{
423 unsigned long timeout = jiffies + msec20_to_jiffies;
424
425 /* 20 msec timeout read */
426 while ((nolock_regb_read(priv, reg) & mask) != val) {
427 if (time_after(jiffies, timeout)) {
428 if (netif_msg_drv(priv))
429 dev_dbg(&priv->spi->dev,
430 "reg %02x ready timeout!\n", reg);
431 return -ETIMEDOUT;
432 }
433 cpu_relax();
434 }
435 return 0;
436}
437
438/*
439 * Wait until the PHY operation is complete.
440 */
441static int wait_phy_ready(struct enc28j60_net *priv)
442{
443 return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
444}
445
446/*
447 * PHY register read
448 * PHY registers are not accessed directly, but through the MII
449 */
450static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
451{
452 u16 ret;
453
454 mutex_lock(&priv->lock);
455 /* set the PHY register address */
456 nolock_regb_write(priv, MIREGADR, address);
457 /* start the register read operation */
458 nolock_regb_write(priv, MICMD, MICMD_MIIRD);
459 /* wait until the PHY read completes */
460 wait_phy_ready(priv);
461 /* quit reading */
462 nolock_regb_write(priv, MICMD, 0x00);
463 /* return the data */
464 ret = nolock_regw_read(priv, MIRDL);
465 mutex_unlock(&priv->lock);
466
467 return ret;
468}
469
470static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
471{
472 int ret;
473
474 mutex_lock(&priv->lock);
475 /* set the PHY register address */
476 nolock_regb_write(priv, MIREGADR, address);
477 /* write the PHY data */
478 nolock_regw_write(priv, MIWRL, data);
479 /* wait until the PHY write completes and return */
480 ret = wait_phy_ready(priv);
481 mutex_unlock(&priv->lock);
482
483 return ret;
484}
485
486/*
487 * Program the hardware MAC address from dev->dev_addr.
488 */
489static int enc28j60_set_hw_macaddr(struct net_device *ndev)
490{
491 int ret;
492 struct enc28j60_net *priv = netdev_priv(ndev);
493
494 mutex_lock(&priv->lock);
495 if (!priv->hw_enable) {
496 if (netif_msg_drv(priv))
497 printk(KERN_INFO DRV_NAME
498 ": %s: Setting MAC address to %pM\n",
499 ndev->name, ndev->dev_addr);
500 /* NOTE: MAC address in ENC28J60 is byte-backward */
501 nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
502 nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
503 nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
504 nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
505 nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
506 nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
507 ret = 0;
508 } else {
509 if (netif_msg_drv(priv))
510 printk(KERN_DEBUG DRV_NAME
511 ": %s() Hardware must be disabled to set "
512 "Mac address\n", __func__);
513 ret = -EBUSY;
514 }
515 mutex_unlock(&priv->lock);
516 return ret;
517}
518
519/*
520 * Store the new hardware address in dev->dev_addr, and update the MAC.
521 */
522static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
523{
524 struct sockaddr *address = addr;
525
526 if (netif_running(dev))
527 return -EBUSY;
528 if (!is_valid_ether_addr(address->sa_data))
529 return -EADDRNOTAVAIL;
530
531 memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
532 return enc28j60_set_hw_macaddr(dev);
533}
534
535/*
536 * Debug routine to dump useful register contents
537 */
538static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
539{
540 mutex_lock(&priv->lock);
541 printk(KERN_DEBUG DRV_NAME " %s\n"
542 "HwRevID: 0x%02x\n"
543 "Cntrl: ECON1 ECON2 ESTAT EIR EIE\n"
544 " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n"
545 "MAC : MACON1 MACON3 MACON4\n"
546 " 0x%02x 0x%02x 0x%02x\n"
547 "Rx : ERXST ERXND ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
548 " 0x%04x 0x%04x 0x%04x 0x%04x "
549 "0x%02x 0x%02x 0x%04x\n"
550 "Tx : ETXST ETXND MACLCON1 MACLCON2 MAPHSUP\n"
551 " 0x%04x 0x%04x 0x%02x 0x%02x 0x%02x\n",
552 msg, nolock_regb_read(priv, EREVID),
553 nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
554 nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
555 nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
556 nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
557 nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
558 nolock_regw_read(priv, ERXWRPTL),
559 nolock_regw_read(priv, ERXRDPTL),
560 nolock_regb_read(priv, ERXFCON),
561 nolock_regb_read(priv, EPKTCNT),
562 nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
563 nolock_regw_read(priv, ETXNDL),
564 nolock_regb_read(priv, MACLCON1),
565 nolock_regb_read(priv, MACLCON2),
566 nolock_regb_read(priv, MAPHSUP));
567 mutex_unlock(&priv->lock);
568}
569
570/*
571 * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
572 */
573static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
574{
575 u16 erxrdpt;
576
577 if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
578 erxrdpt = end;
579 else
580 erxrdpt = next_packet_ptr - 1;
581
582 return erxrdpt;
583}
584
585/*
586 * Calculate wrap around when reading beyond the end of the RX buffer
587 */
588static u16 rx_packet_start(u16 ptr)
589{
590 if (ptr + RSV_SIZE > RXEND_INIT)
591 return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
592 else
593 return ptr + RSV_SIZE;
594}
595
596static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
597{
598 u16 erxrdpt;
599
600 if (start > 0x1FFF || end > 0x1FFF || start > end) {
601 if (netif_msg_drv(priv))
602 printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
603 "bad parameters!\n", __func__, start, end);
604 return;
605 }
606 /* set receive buffer start + end */
607 priv->next_pk_ptr = start;
608 nolock_regw_write(priv, ERXSTL, start);
609 erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
610 nolock_regw_write(priv, ERXRDPTL, erxrdpt);
611 nolock_regw_write(priv, ERXNDL, end);
612}
613
614static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
615{
616 if (start > 0x1FFF || end > 0x1FFF || start > end) {
617 if (netif_msg_drv(priv))
618 printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
619 "bad parameters!\n", __func__, start, end);
620 return;
621 }
622 /* set transmit buffer start + end */
623 nolock_regw_write(priv, ETXSTL, start);
624 nolock_regw_write(priv, ETXNDL, end);
625}
626
627/*
628 * Low power mode shrinks power consumption about 100x, so we'd like
629 * the chip to be in that mode whenever it's inactive. (However, we
630 * can't stay in lowpower mode during suspend with WOL active.)
631 */
632static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
633{
634 if (netif_msg_drv(priv))
635 dev_dbg(&priv->spi->dev, "%s power...\n",
636 is_low ? "low" : "high");
637
638 mutex_lock(&priv->lock);
639 if (is_low) {
640 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
641 poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
642 poll_ready(priv, ECON1, ECON1_TXRTS, 0);
643 /* ECON2_VRPS was set during initialization */
644 nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
645 } else {
646 nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
647 poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
648 /* caller sets ECON1_RXEN */
649 }
650 mutex_unlock(&priv->lock);
651}
652
653static int enc28j60_hw_init(struct enc28j60_net *priv)
654{
655 u8 reg;
656
657 if (netif_msg_drv(priv))
658 printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
659 priv->full_duplex ? "FullDuplex" : "HalfDuplex");
660
661 mutex_lock(&priv->lock);
662 /* first reset the chip */
663 enc28j60_soft_reset(priv);
664 /* Clear ECON1 */
665 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
666 priv->bank = 0;
667 priv->hw_enable = false;
668 priv->tx_retry_count = 0;
669 priv->max_pk_counter = 0;
670 priv->rxfilter = RXFILTER_NORMAL;
671 /* enable address auto increment and voltage regulator powersave */
672 nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
673
674 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
675 nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
676 mutex_unlock(&priv->lock);
677
678 /*
679 * Check the RevID.
680 * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
681 * damaged
682 */
683 reg = locked_regb_read(priv, EREVID);
684 if (netif_msg_drv(priv))
685 printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
686 if (reg == 0x00 || reg == 0xff) {
687 if (netif_msg_drv(priv))
688 printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
689 __func__, reg);
690 return 0;
691 }
692
693 /* default filter mode: (unicast OR broadcast) AND crc valid */
694 locked_regb_write(priv, ERXFCON,
695 ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
696
697 /* enable MAC receive */
698 locked_regb_write(priv, MACON1,
699 MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
700 /* enable automatic padding and CRC operations */
701 if (priv->full_duplex) {
702 locked_regb_write(priv, MACON3,
703 MACON3_PADCFG0 | MACON3_TXCRCEN |
704 MACON3_FRMLNEN | MACON3_FULDPX);
705 /* set inter-frame gap (non-back-to-back) */
706 locked_regb_write(priv, MAIPGL, 0x12);
707 /* set inter-frame gap (back-to-back) */
708 locked_regb_write(priv, MABBIPG, 0x15);
709 } else {
710 locked_regb_write(priv, MACON3,
711 MACON3_PADCFG0 | MACON3_TXCRCEN |
712 MACON3_FRMLNEN);
713 locked_regb_write(priv, MACON4, 1 << 6); /* DEFER bit */
714 /* set inter-frame gap (non-back-to-back) */
715 locked_regw_write(priv, MAIPGL, 0x0C12);
716 /* set inter-frame gap (back-to-back) */
717 locked_regb_write(priv, MABBIPG, 0x12);
718 }
719 /*
720 * MACLCON1 (default)
721 * MACLCON2 (default)
722 * Set the maximum packet size which the controller will accept
723 */
724 locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
725
726 /* Configure LEDs */
727 if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
728 return 0;
729
730 if (priv->full_duplex) {
731 if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
732 return 0;
733 if (!enc28j60_phy_write(priv, PHCON2, 0x00))
734 return 0;
735 } else {
736 if (!enc28j60_phy_write(priv, PHCON1, 0x00))
737 return 0;
738 if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
739 return 0;
740 }
741 if (netif_msg_hw(priv))
742 enc28j60_dump_regs(priv, "Hw initialized.");
743
744 return 1;
745}
746
747static void enc28j60_hw_enable(struct enc28j60_net *priv)
748{
749 /* enable interrupts */
750 if (netif_msg_hw(priv))
751 printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
752 __func__);
753
754 enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
755
756 mutex_lock(&priv->lock);
757 nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
758 EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
759 nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
760 EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
761
762 /* enable receive logic */
763 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
764 priv->hw_enable = true;
765 mutex_unlock(&priv->lock);
766}
767
768static void enc28j60_hw_disable(struct enc28j60_net *priv)
769{
770 mutex_lock(&priv->lock);
771 /* disable interrutps and packet reception */
772 nolock_regb_write(priv, EIE, 0x00);
773 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
774 priv->hw_enable = false;
775 mutex_unlock(&priv->lock);
776}
777
778static int
779enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
780{
781 struct enc28j60_net *priv = netdev_priv(ndev);
782 int ret = 0;
783
784 if (!priv->hw_enable) {
785 /* link is in low power mode now; duplex setting
786 * will take effect on next enc28j60_hw_init().
787 */
788 if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
789 priv->full_duplex = (duplex == DUPLEX_FULL);
790 else {
791 if (netif_msg_link(priv))
792 dev_warn(&ndev->dev,
793 "unsupported link setting\n");
794 ret = -EOPNOTSUPP;
795 }
796 } else {
797 if (netif_msg_link(priv))
798 dev_warn(&ndev->dev, "Warning: hw must be disabled "
799 "to set link mode\n");
800 ret = -EBUSY;
801 }
802 return ret;
803}
804
805/*
806 * Read the Transmit Status Vector
807 */
808static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
809{
810 int endptr;
811
812 endptr = locked_regw_read(priv, ETXNDL);
813 if (netif_msg_hw(priv))
814 printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
815 endptr + 1);
816 enc28j60_mem_read(priv, endptr + 1, sizeof(tsv), tsv);
817}
818
819static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
820 u8 tsv[TSV_SIZE])
821{
822 u16 tmp1, tmp2;
823
824 printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
825 tmp1 = tsv[1];
826 tmp1 <<= 8;
827 tmp1 |= tsv[0];
828
829 tmp2 = tsv[5];
830 tmp2 <<= 8;
831 tmp2 |= tsv[4];
832
833 printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
834 " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
835 printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
836 " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
837 TSV_GETBIT(tsv, TSV_TXCRCERROR),
838 TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
839 TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
840 printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
841 "PacketDefer: %d, ExDefer: %d\n",
842 TSV_GETBIT(tsv, TSV_TXMULTICAST),
843 TSV_GETBIT(tsv, TSV_TXBROADCAST),
844 TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
845 TSV_GETBIT(tsv, TSV_TXEXDEFER));
846 printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
847 "Giant: %d, Underrun: %d\n",
848 TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
849 TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
850 TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
851 printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
852 "BackPressApp: %d, VLanTagFrame: %d\n",
853 TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
854 TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
855 TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
856 TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
857}
858
859/*
860 * Receive Status vector
861 */
862static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
863 u16 pk_ptr, int len, u16 sts)
864{
865 printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
866 msg, pk_ptr);
867 printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
868 RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
869 printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
870 " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
871 RSV_GETBIT(sts, RSV_CRCERROR),
872 RSV_GETBIT(sts, RSV_LENCHECKERR),
873 RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
874 printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
875 "LongDropEvent: %d, CarrierEvent: %d\n",
876 RSV_GETBIT(sts, RSV_RXMULTICAST),
877 RSV_GETBIT(sts, RSV_RXBROADCAST),
878 RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
879 RSV_GETBIT(sts, RSV_CARRIEREV));
880 printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
881 " UnknownOp: %d, VLanTagFrame: %d\n",
882 RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
883 RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
884 RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
885 RSV_GETBIT(sts, RSV_RXTYPEVLAN));
886}
887
888static void dump_packet(const char *msg, int len, const char *data)
889{
890 printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
891 print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
892 data, len, true);
893}
894
895/*
896 * Hardware receive function.
897 * Read the buffer memory, update the FIFO pointer to free the buffer,
898 * check the status vector and decrement the packet counter.
899 */
900static void enc28j60_hw_rx(struct net_device *ndev)
901{
902 struct enc28j60_net *priv = netdev_priv(ndev);
903 struct sk_buff *skb = NULL;
904 u16 erxrdpt, next_packet, rxstat;
905 u8 rsv[RSV_SIZE];
906 int len;
907
908 if (netif_msg_rx_status(priv))
909 printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
910 priv->next_pk_ptr);
911
912 if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
913 if (netif_msg_rx_err(priv))
914 dev_err(&ndev->dev,
915 "%s() Invalid packet address!! 0x%04x\n",
916 __func__, priv->next_pk_ptr);
917 /* packet address corrupted: reset RX logic */
918 mutex_lock(&priv->lock);
919 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
920 nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
921 nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
922 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
923 nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
924 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
925 mutex_unlock(&priv->lock);
926 ndev->stats.rx_errors++;
927 return;
928 }
929 /* Read next packet pointer and rx status vector */
930 enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
931
932 next_packet = rsv[1];
933 next_packet <<= 8;
934 next_packet |= rsv[0];
935
936 len = rsv[3];
937 len <<= 8;
938 len |= rsv[2];
939
940 rxstat = rsv[5];
941 rxstat <<= 8;
942 rxstat |= rsv[4];
943
944 if (netif_msg_rx_status(priv))
945 enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
946
947 if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
948 if (netif_msg_rx_err(priv))
949 dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
950 ndev->stats.rx_errors++;
951 if (RSV_GETBIT(rxstat, RSV_CRCERROR))
952 ndev->stats.rx_crc_errors++;
953 if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
954 ndev->stats.rx_frame_errors++;
955 if (len > MAX_FRAMELEN)
956 ndev->stats.rx_over_errors++;
957 } else {
958 skb = dev_alloc_skb(len + NET_IP_ALIGN);
959 if (!skb) {
960 if (netif_msg_rx_err(priv))
961 dev_err(&ndev->dev,
962 "out of memory for Rx'd frame\n");
963 ndev->stats.rx_dropped++;
964 } else {
965 skb->dev = ndev;
966 skb_reserve(skb, NET_IP_ALIGN);
967 /* copy the packet from the receive buffer */
968 enc28j60_mem_read(priv,
969 rx_packet_start(priv->next_pk_ptr),
970 len, skb_put(skb, len));
971 if (netif_msg_pktdata(priv))
972 dump_packet(__func__, skb->len, skb->data);
973 skb->protocol = eth_type_trans(skb, ndev);
974 /* update statistics */
975 ndev->stats.rx_packets++;
976 ndev->stats.rx_bytes += len;
977 netif_rx_ni(skb);
978 }
979 }
980 /*
981 * Move the RX read pointer to the start of the next
982 * received packet.
983 * This frees the memory we just read out
984 */
985 erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
986 if (netif_msg_hw(priv))
987 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
988 __func__, erxrdpt);
989
990 mutex_lock(&priv->lock);
991 nolock_regw_write(priv, ERXRDPTL, erxrdpt);
992#ifdef CONFIG_ENC28J60_WRITEVERIFY
993 if (netif_msg_drv(priv)) {
994 u16 reg;
995 reg = nolock_regw_read(priv, ERXRDPTL);
996 if (reg != erxrdpt)
997 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
998 "error (0x%04x - 0x%04x)\n", __func__,
999 reg, erxrdpt);
1000 }
1001#endif
1002 priv->next_pk_ptr = next_packet;
1003 /* we are done with this packet, decrement the packet counter */
1004 nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
1005 mutex_unlock(&priv->lock);
1006}
1007
1008/*
1009 * Calculate free space in RxFIFO
1010 */
1011static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
1012{
1013 int epkcnt, erxst, erxnd, erxwr, erxrd;
1014 int free_space;
1015
1016 mutex_lock(&priv->lock);
1017 epkcnt = nolock_regb_read(priv, EPKTCNT);
1018 if (epkcnt >= 255)
1019 free_space = -1;
1020 else {
1021 erxst = nolock_regw_read(priv, ERXSTL);
1022 erxnd = nolock_regw_read(priv, ERXNDL);
1023 erxwr = nolock_regw_read(priv, ERXWRPTL);
1024 erxrd = nolock_regw_read(priv, ERXRDPTL);
1025
1026 if (erxwr > erxrd)
1027 free_space = (erxnd - erxst) - (erxwr - erxrd);
1028 else if (erxwr == erxrd)
1029 free_space = (erxnd - erxst);
1030 else
1031 free_space = erxrd - erxwr - 1;
1032 }
1033 mutex_unlock(&priv->lock);
1034 if (netif_msg_rx_status(priv))
1035 printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
1036 __func__, free_space);
1037 return free_space;
1038}
1039
1040/*
1041 * Access the PHY to determine link status
1042 */
1043static void enc28j60_check_link_status(struct net_device *ndev)
1044{
1045 struct enc28j60_net *priv = netdev_priv(ndev);
1046 u16 reg;
1047 int duplex;
1048
1049 reg = enc28j60_phy_read(priv, PHSTAT2);
1050 if (netif_msg_hw(priv))
1051 printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
1052 "PHSTAT2: %04x\n", __func__,
1053 enc28j60_phy_read(priv, PHSTAT1), reg);
1054 duplex = reg & PHSTAT2_DPXSTAT;
1055
1056 if (reg & PHSTAT2_LSTAT) {
1057 netif_carrier_on(ndev);
1058 if (netif_msg_ifup(priv))
1059 dev_info(&ndev->dev, "link up - %s\n",
1060 duplex ? "Full duplex" : "Half duplex");
1061 } else {
1062 if (netif_msg_ifdown(priv))
1063 dev_info(&ndev->dev, "link down\n");
1064 netif_carrier_off(ndev);
1065 }
1066}
1067
1068static void enc28j60_tx_clear(struct net_device *ndev, bool err)
1069{
1070 struct enc28j60_net *priv = netdev_priv(ndev);
1071
1072 if (err)
1073 ndev->stats.tx_errors++;
1074 else
1075 ndev->stats.tx_packets++;
1076
1077 if (priv->tx_skb) {
1078 if (!err)
1079 ndev->stats.tx_bytes += priv->tx_skb->len;
1080 dev_kfree_skb(priv->tx_skb);
1081 priv->tx_skb = NULL;
1082 }
1083 locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1084 netif_wake_queue(ndev);
1085}
1086
1087/*
1088 * RX handler
1089 * ignore PKTIF because is unreliable! (look at the errata datasheet)
1090 * check EPKTCNT is the suggested workaround.
1091 * We don't need to clear interrupt flag, automatically done when
1092 * enc28j60_hw_rx() decrements the packet counter.
1093 * Returns how many packet processed.
1094 */
1095static int enc28j60_rx_interrupt(struct net_device *ndev)
1096{
1097 struct enc28j60_net *priv = netdev_priv(ndev);
1098 int pk_counter, ret;
1099
1100 pk_counter = locked_regb_read(priv, EPKTCNT);
1101 if (pk_counter && netif_msg_intr(priv))
1102 printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
1103 if (pk_counter > priv->max_pk_counter) {
1104 /* update statistics */
1105 priv->max_pk_counter = pk_counter;
1106 if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
1107 printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
1108 priv->max_pk_counter);
1109 }
1110 ret = pk_counter;
1111 while (pk_counter-- > 0)
1112 enc28j60_hw_rx(ndev);
1113
1114 return ret;
1115}
1116
1117static void enc28j60_irq_work_handler(struct work_struct *work)
1118{
1119 struct enc28j60_net *priv =
1120 container_of(work, struct enc28j60_net, irq_work);
1121 struct net_device *ndev = priv->netdev;
1122 int intflags, loop;
1123
1124 if (netif_msg_intr(priv))
1125 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1126 /* disable further interrupts */
1127 locked_reg_bfclr(priv, EIE, EIE_INTIE);
1128
1129 do {
1130 loop = 0;
1131 intflags = locked_regb_read(priv, EIR);
1132 /* DMA interrupt handler (not currently used) */
1133 if ((intflags & EIR_DMAIF) != 0) {
1134 loop++;
1135 if (netif_msg_intr(priv))
1136 printk(KERN_DEBUG DRV_NAME
1137 ": intDMA(%d)\n", loop);
1138 locked_reg_bfclr(priv, EIR, EIR_DMAIF);
1139 }
1140 /* LINK changed handler */
1141 if ((intflags & EIR_LINKIF) != 0) {
1142 loop++;
1143 if (netif_msg_intr(priv))
1144 printk(KERN_DEBUG DRV_NAME
1145 ": intLINK(%d)\n", loop);
1146 enc28j60_check_link_status(ndev);
1147 /* read PHIR to clear the flag */
1148 enc28j60_phy_read(priv, PHIR);
1149 }
1150 /* TX complete handler */
1151 if ((intflags & EIR_TXIF) != 0) {
1152 bool err = false;
1153 loop++;
1154 if (netif_msg_intr(priv))
1155 printk(KERN_DEBUG DRV_NAME
1156 ": intTX(%d)\n", loop);
1157 priv->tx_retry_count = 0;
1158 if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
1159 if (netif_msg_tx_err(priv))
1160 dev_err(&ndev->dev,
1161 "Tx Error (aborted)\n");
1162 err = true;
1163 }
1164 if (netif_msg_tx_done(priv)) {
1165 u8 tsv[TSV_SIZE];
1166 enc28j60_read_tsv(priv, tsv);
1167 enc28j60_dump_tsv(priv, "Tx Done", tsv);
1168 }
1169 enc28j60_tx_clear(ndev, err);
1170 locked_reg_bfclr(priv, EIR, EIR_TXIF);
1171 }
1172 /* TX Error handler */
1173 if ((intflags & EIR_TXERIF) != 0) {
1174 u8 tsv[TSV_SIZE];
1175
1176 loop++;
1177 if (netif_msg_intr(priv))
1178 printk(KERN_DEBUG DRV_NAME
1179 ": intTXErr(%d)\n", loop);
1180 locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1181 enc28j60_read_tsv(priv, tsv);
1182 if (netif_msg_tx_err(priv))
1183 enc28j60_dump_tsv(priv, "Tx Error", tsv);
1184 /* Reset TX logic */
1185 mutex_lock(&priv->lock);
1186 nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
1187 nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
1188 nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
1189 mutex_unlock(&priv->lock);
1190 /* Transmit Late collision check for retransmit */
1191 if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
1192 if (netif_msg_tx_err(priv))
1193 printk(KERN_DEBUG DRV_NAME
1194 ": LateCollision TXErr (%d)\n",
1195 priv->tx_retry_count);
1196 if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
1197 locked_reg_bfset(priv, ECON1,
1198 ECON1_TXRTS);
1199 else
1200 enc28j60_tx_clear(ndev, true);
1201 } else
1202 enc28j60_tx_clear(ndev, true);
1203 locked_reg_bfclr(priv, EIR, EIR_TXERIF);
1204 }
1205 /* RX Error handler */
1206 if ((intflags & EIR_RXERIF) != 0) {
1207 loop++;
1208 if (netif_msg_intr(priv))
1209 printk(KERN_DEBUG DRV_NAME
1210 ": intRXErr(%d)\n", loop);
1211 /* Check free FIFO space to flag RX overrun */
1212 if (enc28j60_get_free_rxfifo(priv) <= 0) {
1213 if (netif_msg_rx_err(priv))
1214 printk(KERN_DEBUG DRV_NAME
1215 ": RX Overrun\n");
1216 ndev->stats.rx_dropped++;
1217 }
1218 locked_reg_bfclr(priv, EIR, EIR_RXERIF);
1219 }
1220 /* RX handler */
1221 if (enc28j60_rx_interrupt(ndev))
1222 loop++;
1223 } while (loop);
1224
1225 /* re-enable interrupts */
1226 locked_reg_bfset(priv, EIE, EIE_INTIE);
1227 if (netif_msg_intr(priv))
1228 printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
1229}
1230
1231/*
1232 * Hardware transmit function.
1233 * Fill the buffer memory and send the contents of the transmit buffer
1234 * onto the network
1235 */
1236static void enc28j60_hw_tx(struct enc28j60_net *priv)
1237{
1238 if (netif_msg_tx_queued(priv))
1239 printk(KERN_DEBUG DRV_NAME
1240 ": Tx Packet Len:%d\n", priv->tx_skb->len);
1241
1242 if (netif_msg_pktdata(priv))
1243 dump_packet(__func__,
1244 priv->tx_skb->len, priv->tx_skb->data);
1245 enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
1246
1247#ifdef CONFIG_ENC28J60_WRITEVERIFY
1248 /* readback and verify written data */
1249 if (netif_msg_drv(priv)) {
1250 int test_len, k;
1251 u8 test_buf[64]; /* limit the test to the first 64 bytes */
1252 int okflag;
1253
1254 test_len = priv->tx_skb->len;
1255 if (test_len > sizeof(test_buf))
1256 test_len = sizeof(test_buf);
1257
1258 /* + 1 to skip control byte */
1259 enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
1260 okflag = 1;
1261 for (k = 0; k < test_len; k++) {
1262 if (priv->tx_skb->data[k] != test_buf[k]) {
1263 printk(KERN_DEBUG DRV_NAME
1264 ": Error, %d location differ: "
1265 "0x%02x-0x%02x\n", k,
1266 priv->tx_skb->data[k], test_buf[k]);
1267 okflag = 0;
1268 }
1269 }
1270 if (!okflag)
1271 printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
1272 "verify ERROR!\n");
1273 }
1274#endif
1275 /* set TX request flag */
1276 locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
1277}
1278
1279static int enc28j60_send_packet(struct sk_buff *skb, struct net_device *dev)
1280{
1281 struct enc28j60_net *priv = netdev_priv(dev);
1282
1283 if (netif_msg_tx_queued(priv))
1284 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1285
1286 /* If some error occurs while trying to transmit this
1287 * packet, you should return '1' from this function.
1288 * In such a case you _may not_ do anything to the
1289 * SKB, it is still owned by the network queueing
1290 * layer when an error is returned. This means you
1291 * may not modify any SKB fields, you may not free
1292 * the SKB, etc.
1293 */
1294 netif_stop_queue(dev);
1295
1296 /* save the timestamp */
1297 priv->netdev->trans_start = jiffies;
1298 /* Remember the skb for deferred processing */
1299 priv->tx_skb = skb;
1300 schedule_work(&priv->tx_work);
1301
1302 return 0;
1303}
1304
1305static void enc28j60_tx_work_handler(struct work_struct *work)
1306{
1307 struct enc28j60_net *priv =
1308 container_of(work, struct enc28j60_net, tx_work);
1309
1310 /* actual delivery of data */
1311 enc28j60_hw_tx(priv);
1312}
1313
1314static irqreturn_t enc28j60_irq(int irq, void *dev_id)
1315{
1316 struct enc28j60_net *priv = dev_id;
1317
1318 /*
1319 * Can't do anything in interrupt context because we need to
1320 * block (spi_sync() is blocking) so fire of the interrupt
1321 * handling workqueue.
1322 * Remember that we access enc28j60 registers through SPI bus
1323 * via spi_sync() call.
1324 */
1325 schedule_work(&priv->irq_work);
1326
1327 return IRQ_HANDLED;
1328}
1329
1330static void enc28j60_tx_timeout(struct net_device *ndev)
1331{
1332 struct enc28j60_net *priv = netdev_priv(ndev);
1333
1334 if (netif_msg_timer(priv))
1335 dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
1336
1337 ndev->stats.tx_errors++;
1338 /* can't restart safely under softirq */
1339 schedule_work(&priv->restart_work);
1340}
1341
1342/*
1343 * Open/initialize the board. This is called (in the current kernel)
1344 * sometime after booting when the 'ifconfig' program is run.
1345 *
1346 * This routine should set everything up anew at each open, even
1347 * registers that "should" only need to be set once at boot, so that
1348 * there is non-reboot way to recover if something goes wrong.
1349 */
1350static int enc28j60_net_open(struct net_device *dev)
1351{
1352 struct enc28j60_net *priv = netdev_priv(dev);
1353
1354 if (netif_msg_drv(priv))
1355 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1356
1357 if (!is_valid_ether_addr(dev->dev_addr)) {
1358 if (netif_msg_ifup(priv))
1359 dev_err(&dev->dev, "invalid MAC address %pM\n",
1360 dev->dev_addr);
1361 return -EADDRNOTAVAIL;
1362 }
1363 /* Reset the hardware here (and take it out of low power mode) */
1364 enc28j60_lowpower(priv, false);
1365 enc28j60_hw_disable(priv);
1366 if (!enc28j60_hw_init(priv)) {
1367 if (netif_msg_ifup(priv))
1368 dev_err(&dev->dev, "hw_reset() failed\n");
1369 return -EINVAL;
1370 }
1371 /* Update the MAC address (in case user has changed it) */
1372 enc28j60_set_hw_macaddr(dev);
1373 /* Enable interrupts */
1374 enc28j60_hw_enable(priv);
1375 /* check link status */
1376 enc28j60_check_link_status(dev);
1377 /* We are now ready to accept transmit requests from
1378 * the queueing layer of the networking.
1379 */
1380 netif_start_queue(dev);
1381
1382 return 0;
1383}
1384
1385/* The inverse routine to net_open(). */
1386static int enc28j60_net_close(struct net_device *dev)
1387{
1388 struct enc28j60_net *priv = netdev_priv(dev);
1389
1390 if (netif_msg_drv(priv))
1391 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1392
1393 enc28j60_hw_disable(priv);
1394 enc28j60_lowpower(priv, true);
1395 netif_stop_queue(dev);
1396
1397 return 0;
1398}
1399
1400/*
1401 * Set or clear the multicast filter for this adapter
1402 * num_addrs == -1 Promiscuous mode, receive all packets
1403 * num_addrs == 0 Normal mode, filter out multicast packets
1404 * num_addrs > 0 Multicast mode, receive normal and MC packets
1405 */
1406static void enc28j60_set_multicast_list(struct net_device *dev)
1407{
1408 struct enc28j60_net *priv = netdev_priv(dev);
1409 int oldfilter = priv->rxfilter;
1410
1411 if (dev->flags & IFF_PROMISC) {
1412 if (netif_msg_link(priv))
1413 dev_info(&dev->dev, "promiscuous mode\n");
1414 priv->rxfilter = RXFILTER_PROMISC;
1415 } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
1416 if (netif_msg_link(priv))
1417 dev_info(&dev->dev, "%smulticast mode\n",
1418 (dev->flags & IFF_ALLMULTI) ? "all-" : "");
1419 priv->rxfilter = RXFILTER_MULTI;
1420 } else {
1421 if (netif_msg_link(priv))
1422 dev_info(&dev->dev, "normal mode\n");
1423 priv->rxfilter = RXFILTER_NORMAL;
1424 }
1425
1426 if (oldfilter != priv->rxfilter)
1427 schedule_work(&priv->setrx_work);
1428}
1429
1430static void enc28j60_setrx_work_handler(struct work_struct *work)
1431{
1432 struct enc28j60_net *priv =
1433 container_of(work, struct enc28j60_net, setrx_work);
1434
1435 if (priv->rxfilter == RXFILTER_PROMISC) {
1436 if (netif_msg_drv(priv))
1437 printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
1438 locked_regb_write(priv, ERXFCON, 0x00);
1439 } else if (priv->rxfilter == RXFILTER_MULTI) {
1440 if (netif_msg_drv(priv))
1441 printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
1442 locked_regb_write(priv, ERXFCON,
1443 ERXFCON_UCEN | ERXFCON_CRCEN |
1444 ERXFCON_BCEN | ERXFCON_MCEN);
1445 } else {
1446 if (netif_msg_drv(priv))
1447 printk(KERN_DEBUG DRV_NAME ": normal mode\n");
1448 locked_regb_write(priv, ERXFCON,
1449 ERXFCON_UCEN | ERXFCON_CRCEN |
1450 ERXFCON_BCEN);
1451 }
1452}
1453
1454static void enc28j60_restart_work_handler(struct work_struct *work)
1455{
1456 struct enc28j60_net *priv =
1457 container_of(work, struct enc28j60_net, restart_work);
1458 struct net_device *ndev = priv->netdev;
1459 int ret;
1460
1461 rtnl_lock();
1462 if (netif_running(ndev)) {
1463 enc28j60_net_close(ndev);
1464 ret = enc28j60_net_open(ndev);
1465 if (unlikely(ret)) {
1466 dev_info(&ndev->dev, " could not restart %d\n", ret);
1467 dev_close(ndev);
1468 }
1469 }
1470 rtnl_unlock();
1471}
1472
1473/* ......................... ETHTOOL SUPPORT ........................... */
1474
1475static void
1476enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1477{
1478 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1479 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1480 strlcpy(info->bus_info,
1481 dev_name(dev->dev.parent), sizeof(info->bus_info));
1482}
1483
1484static int
1485enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1486{
1487 struct enc28j60_net *priv = netdev_priv(dev);
1488
1489 cmd->transceiver = XCVR_INTERNAL;
1490 cmd->supported = SUPPORTED_10baseT_Half
1491 | SUPPORTED_10baseT_Full
1492 | SUPPORTED_TP;
1493 cmd->speed = SPEED_10;
1494 cmd->duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
1495 cmd->port = PORT_TP;
1496 cmd->autoneg = AUTONEG_DISABLE;
1497
1498 return 0;
1499}
1500
1501static int
1502enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1503{
1504 return enc28j60_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
1505}
1506
1507static u32 enc28j60_get_msglevel(struct net_device *dev)
1508{
1509 struct enc28j60_net *priv = netdev_priv(dev);
1510 return priv->msg_enable;
1511}
1512
1513static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
1514{
1515 struct enc28j60_net *priv = netdev_priv(dev);
1516 priv->msg_enable = val;
1517}
1518
1519static const struct ethtool_ops enc28j60_ethtool_ops = {
1520 .get_settings = enc28j60_get_settings,
1521 .set_settings = enc28j60_set_settings,
1522 .get_drvinfo = enc28j60_get_drvinfo,
1523 .get_msglevel = enc28j60_get_msglevel,
1524 .set_msglevel = enc28j60_set_msglevel,
1525};
1526
1527static int enc28j60_chipset_init(struct net_device *dev)
1528{
1529 struct enc28j60_net *priv = netdev_priv(dev);
1530
1531 return enc28j60_hw_init(priv);
1532}
1533
1534static const struct net_device_ops enc28j60_netdev_ops = {
1535 .ndo_open = enc28j60_net_open,
1536 .ndo_stop = enc28j60_net_close,
1537 .ndo_start_xmit = enc28j60_send_packet,
1538 .ndo_set_multicast_list = enc28j60_set_multicast_list,
1539 .ndo_set_mac_address = enc28j60_set_mac_address,
1540 .ndo_tx_timeout = enc28j60_tx_timeout,
1541 .ndo_change_mtu = eth_change_mtu,
1542 .ndo_validate_addr = eth_validate_addr,
1543};
1544
1545static int __devinit enc28j60_probe(struct spi_device *spi)
1546{
1547 struct net_device *dev;
1548 struct enc28j60_net *priv;
1549 int ret = 0;
1550
1551 if (netif_msg_drv(&debug))
1552 dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
1553 DRV_VERSION);
1554
1555 dev = alloc_etherdev(sizeof(struct enc28j60_net));
1556 if (!dev) {
1557 if (netif_msg_drv(&debug))
1558 dev_err(&spi->dev, DRV_NAME
1559 ": unable to alloc new ethernet\n");
1560 ret = -ENOMEM;
1561 goto error_alloc;
1562 }
1563 priv = netdev_priv(dev);
1564
1565 priv->netdev = dev; /* priv to netdev reference */
1566 priv->spi = spi; /* priv to spi reference */
1567 priv->msg_enable = netif_msg_init(debug.msg_enable,
1568 ENC28J60_MSG_DEFAULT);
1569 mutex_init(&priv->lock);
1570 INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
1571 INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
1572 INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
1573 INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
1574 dev_set_drvdata(&spi->dev, priv); /* spi to priv reference */
1575 SET_NETDEV_DEV(dev, &spi->dev);
1576
1577 if (!enc28j60_chipset_init(dev)) {
1578 if (netif_msg_probe(priv))
1579 dev_info(&spi->dev, DRV_NAME " chip not found\n");
1580 ret = -EIO;
1581 goto error_irq;
1582 }
1583 random_ether_addr(dev->dev_addr);
1584 enc28j60_set_hw_macaddr(dev);
1585
1586 /* Board setup must set the relevant edge trigger type;
1587 * level triggers won't currently work.
1588 */
1589 ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
1590 if (ret < 0) {
1591 if (netif_msg_probe(priv))
1592 dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
1593 "(ret = %d)\n", spi->irq, ret);
1594 goto error_irq;
1595 }
1596
1597 dev->if_port = IF_PORT_10BASET;
1598 dev->irq = spi->irq;
1599 dev->netdev_ops = &enc28j60_netdev_ops;
1600 dev->watchdog_timeo = TX_TIMEOUT;
1601 SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
1602
1603 enc28j60_lowpower(priv, true);
1604
1605 ret = register_netdev(dev);
1606 if (ret) {
1607 if (netif_msg_probe(priv))
1608 dev_err(&spi->dev, "register netdev " DRV_NAME
1609 " failed (ret = %d)\n", ret);
1610 goto error_register;
1611 }
1612 dev_info(&dev->dev, DRV_NAME " driver registered\n");
1613
1614 return 0;
1615
1616error_register:
1617 free_irq(spi->irq, priv);
1618error_irq:
1619 free_netdev(dev);
1620error_alloc:
1621 return ret;
1622}
1623
1624static int __devexit enc28j60_remove(struct spi_device *spi)
1625{
1626 struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
1627
1628 if (netif_msg_drv(priv))
1629 printk(KERN_DEBUG DRV_NAME ": remove\n");
1630
1631 unregister_netdev(priv->netdev);
1632 free_irq(spi->irq, priv);
1633 free_netdev(priv->netdev);
1634
1635 return 0;
1636}
1637
1638static struct spi_driver enc28j60_driver = {
1639 .driver = {
1640 .name = DRV_NAME,
1641 .owner = THIS_MODULE,
1642 },
1643 .probe = enc28j60_probe,
1644 .remove = __devexit_p(enc28j60_remove),
1645};
1646
1647static int __init enc28j60_init(void)
1648{
1649 msec20_to_jiffies = msecs_to_jiffies(20);
1650
1651 return spi_register_driver(&enc28j60_driver);
1652}
1653
1654module_init(enc28j60_init);
1655
1656static void __exit enc28j60_exit(void)
1657{
1658 spi_unregister_driver(&enc28j60_driver);
1659}
1660
1661module_exit(enc28j60_exit);
1662
1663MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1664MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
1665MODULE_LICENSE("GPL");
1666module_param_named(debug, debug.msg_enable, int, 0);
1667MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");