Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v2.6.29-rc2 871 lines 24 kB view raw
1/* mac8390.c: New driver for 8390-based Nubus (or Nubus-alike) 2 Ethernet cards on Linux */ 3/* Based on the former daynaport.c driver, by Alan Cox. Some code 4 taken from or inspired by skeleton.c by Donald Becker, acenic.c by 5 Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker. 6 7 This software may be used and distributed according to the terms of 8 the GNU Public License, incorporated herein by reference. */ 9 10/* 2000-02-28: support added for Dayna and Kinetics cards by 11 A.G.deWijn@phys.uu.nl */ 12/* 2000-04-04: support added for Dayna2 by bart@etpmod.phys.tue.nl */ 13/* 2001-04-18: support for DaynaPort E/LC-M by rayk@knightsmanor.org */ 14/* 2001-05-15: support for Cabletron ported from old daynaport driver 15 * and fixed access to Sonic Sys card which masquerades as a Farallon 16 * by rayk@knightsmanor.org */ 17/* 2002-12-30: Try to support more cards, some clues from NetBSD driver */ 18/* 2003-12-26: Make sure Asante cards always work. */ 19 20#include <linux/module.h> 21#include <linux/kernel.h> 22#include <linux/types.h> 23#include <linux/fcntl.h> 24#include <linux/interrupt.h> 25#include <linux/ptrace.h> 26#include <linux/ioport.h> 27#include <linux/nubus.h> 28#include <linux/in.h> 29#include <linux/slab.h> 30#include <linux/string.h> 31#include <linux/errno.h> 32#include <linux/init.h> 33#include <linux/netdevice.h> 34#include <linux/etherdevice.h> 35#include <linux/skbuff.h> 36#include <linux/bitops.h> 37 38#include <asm/system.h> 39#include <asm/io.h> 40#include <asm/dma.h> 41#include <asm/hwtest.h> 42#include <asm/macints.h> 43 44static char version[] = 45 "mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n"; 46 47#define EI_SHIFT(x) (ei_local->reg_offset[x]) 48#define ei_inb(port) in_8(port) 49#define ei_outb(val,port) out_8(port,val) 50#define ei_inb_p(port) in_8(port) 51#define ei_outb_p(val,port) out_8(port,val) 52 53#include "lib8390.c" 54 55#define WD_START_PG 0x00 /* First page of TX buffer */ 56#define CABLETRON_RX_START_PG 0x00 /* First page of RX buffer */ 57#define CABLETRON_RX_STOP_PG 0x30 /* Last page +1 of RX ring */ 58#define CABLETRON_TX_START_PG CABLETRON_RX_STOP_PG /* First page of TX buffer */ 59 60/* Unfortunately it seems we have to hardcode these for the moment */ 61/* Shouldn't the card know about this? Does anyone know where to read it off the card? Do we trust the data provided by the card? */ 62 63#define DAYNA_8390_BASE 0x80000 64#define DAYNA_8390_MEM 0x00000 65 66#define CABLETRON_8390_BASE 0x90000 67#define CABLETRON_8390_MEM 0x00000 68 69#define INTERLAN_8390_BASE 0xE0000 70#define INTERLAN_8390_MEM 0xD0000 71 72enum mac8390_type { 73 MAC8390_NONE = -1, 74 MAC8390_APPLE, 75 MAC8390_ASANTE, 76 MAC8390_FARALLON, 77 MAC8390_CABLETRON, 78 MAC8390_DAYNA, 79 MAC8390_INTERLAN, 80 MAC8390_KINETICS, 81}; 82 83static const char * cardname[] = { 84 "apple", 85 "asante", 86 "farallon", 87 "cabletron", 88 "dayna", 89 "interlan", 90 "kinetics", 91}; 92 93static int word16[] = { 94 1, /* apple */ 95 1, /* asante */ 96 1, /* farallon */ 97 1, /* cabletron */ 98 0, /* dayna */ 99 1, /* interlan */ 100 0, /* kinetics */ 101}; 102 103/* on which cards do we use NuBus resources? */ 104static int useresources[] = { 105 1, /* apple */ 106 1, /* asante */ 107 1, /* farallon */ 108 0, /* cabletron */ 109 0, /* dayna */ 110 0, /* interlan */ 111 0, /* kinetics */ 112}; 113 114enum mac8390_access { 115 ACCESS_UNKNOWN = 0, 116 ACCESS_32, 117 ACCESS_16, 118}; 119 120extern int mac8390_memtest(struct net_device * dev); 121static int mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev, 122 enum mac8390_type type); 123 124static int mac8390_open(struct net_device * dev); 125static int mac8390_close(struct net_device * dev); 126static void mac8390_no_reset(struct net_device *dev); 127static void interlan_reset(struct net_device *dev); 128 129/* Sane (32-bit chunk memory read/write) - Some Farallon and Apple do this*/ 130static void sane_get_8390_hdr(struct net_device *dev, 131 struct e8390_pkt_hdr *hdr, int ring_page); 132static void sane_block_input(struct net_device * dev, int count, 133 struct sk_buff * skb, int ring_offset); 134static void sane_block_output(struct net_device * dev, int count, 135 const unsigned char * buf, const int start_page); 136 137/* dayna_memcpy to and from card */ 138static void dayna_memcpy_fromcard(struct net_device *dev, void *to, 139 int from, int count); 140static void dayna_memcpy_tocard(struct net_device *dev, int to, 141 const void *from, int count); 142 143/* Dayna - Dayna/Kinetics use this */ 144static void dayna_get_8390_hdr(struct net_device *dev, 145 struct e8390_pkt_hdr *hdr, int ring_page); 146static void dayna_block_input(struct net_device *dev, int count, 147 struct sk_buff *skb, int ring_offset); 148static void dayna_block_output(struct net_device *dev, int count, 149 const unsigned char *buf, int start_page); 150 151#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) 152#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) 153 154/* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */ 155static void slow_sane_get_8390_hdr(struct net_device *dev, 156 struct e8390_pkt_hdr *hdr, int ring_page); 157static void slow_sane_block_input(struct net_device *dev, int count, 158 struct sk_buff *skb, int ring_offset); 159static void slow_sane_block_output(struct net_device *dev, int count, 160 const unsigned char *buf, int start_page); 161static void word_memcpy_tocard(void *tp, const void *fp, int count); 162static void word_memcpy_fromcard(void *tp, const void *fp, int count); 163 164static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) 165{ 166 switch (dev->dr_sw) { 167 case NUBUS_DRSW_3COM: 168 switch (dev->dr_hw) { 169 case NUBUS_DRHW_APPLE_SONIC_NB: 170 case NUBUS_DRHW_APPLE_SONIC_LC: 171 case NUBUS_DRHW_SONNET: 172 return MAC8390_NONE; 173 break; 174 default: 175 return MAC8390_APPLE; 176 break; 177 } 178 break; 179 180 case NUBUS_DRSW_APPLE: 181 switch (dev->dr_hw) { 182 case NUBUS_DRHW_ASANTE_LC: 183 return MAC8390_NONE; 184 break; 185 case NUBUS_DRHW_CABLETRON: 186 return MAC8390_CABLETRON; 187 break; 188 default: 189 return MAC8390_APPLE; 190 break; 191 } 192 break; 193 194 case NUBUS_DRSW_ASANTE: 195 return MAC8390_ASANTE; 196 break; 197 198 case NUBUS_DRSW_TECHWORKS: 199 case NUBUS_DRSW_DAYNA2: 200 case NUBUS_DRSW_DAYNA_LC: 201 if (dev->dr_hw == NUBUS_DRHW_CABLETRON) 202 return MAC8390_CABLETRON; 203 else 204 return MAC8390_APPLE; 205 break; 206 207 case NUBUS_DRSW_FARALLON: 208 return MAC8390_FARALLON; 209 break; 210 211 case NUBUS_DRSW_KINETICS: 212 switch (dev->dr_hw) { 213 case NUBUS_DRHW_INTERLAN: 214 return MAC8390_INTERLAN; 215 break; 216 default: 217 return MAC8390_KINETICS; 218 break; 219 } 220 break; 221 222 case NUBUS_DRSW_DAYNA: 223 // These correspond to Dayna Sonic cards 224 // which use the macsonic driver 225 if (dev->dr_hw == NUBUS_DRHW_SMC9194 || 226 dev->dr_hw == NUBUS_DRHW_INTERLAN ) 227 return MAC8390_NONE; 228 else 229 return MAC8390_DAYNA; 230 break; 231 } 232 return MAC8390_NONE; 233} 234 235static enum mac8390_access __init mac8390_testio(volatile unsigned long membase) 236{ 237 unsigned long outdata = 0xA5A0B5B0; 238 unsigned long indata = 0x00000000; 239 /* Try writing 32 bits */ 240 memcpy((char *)membase, (char *)&outdata, 4); 241 /* Now compare them */ 242 if (memcmp((char *)&outdata, (char *)membase, 4) == 0) 243 return ACCESS_32; 244 /* Write 16 bit output */ 245 word_memcpy_tocard((char *)membase, (char *)&outdata, 4); 246 /* Now read it back */ 247 word_memcpy_fromcard((char *)&indata, (char *)membase, 4); 248 if (outdata == indata) 249 return ACCESS_16; 250 return ACCESS_UNKNOWN; 251} 252 253static int __init mac8390_memsize(unsigned long membase) 254{ 255 unsigned long flags; 256 int i, j; 257 258 local_irq_save(flags); 259 /* Check up to 32K in 4K increments */ 260 for (i = 0; i < 8; i++) { 261 volatile unsigned short *m = (unsigned short *) (membase + (i * 0x1000)); 262 263 /* Unwriteable - we have a fully decoded card and the 264 RAM end located */ 265 if (hwreg_present(m) == 0) 266 break; 267 268 /* write a distinctive byte */ 269 *m = 0xA5A0 | i; 270 /* check that we read back what we wrote */ 271 if (*m != (0xA5A0 | i)) 272 break; 273 274 /* check for partial decode and wrap */ 275 for (j = 0; j < i; j++) { 276 volatile unsigned short *p = (unsigned short *) (membase + (j * 0x1000)); 277 if (*p != (0xA5A0 | j)) 278 break; 279 } 280 } 281 local_irq_restore(flags); 282 /* in any case, we stopped once we tried one block too many, 283 or once we reached 32K */ 284 return i * 0x1000; 285} 286 287struct net_device * __init mac8390_probe(int unit) 288{ 289 struct net_device *dev; 290 volatile unsigned short *i; 291 int version_disp = 0; 292 struct nubus_dev * ndev = NULL; 293 int err = -ENODEV; 294 295 struct nubus_dir dir; 296 struct nubus_dirent ent; 297 int offset; 298 static unsigned int slots; 299 300 enum mac8390_type cardtype; 301 302 /* probably should check for Nubus instead */ 303 304 if (!MACH_IS_MAC) 305 return ERR_PTR(-ENODEV); 306 307 dev = alloc_ei_netdev(); 308 if (!dev) 309 return ERR_PTR(-ENOMEM); 310 311 if (unit >= 0) 312 sprintf(dev->name, "eth%d", unit); 313 314 while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev))) { 315 /* Have we seen it already? */ 316 if (slots & (1<<ndev->board->slot)) 317 continue; 318 slots |= 1<<ndev->board->slot; 319 320 if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE) 321 continue; 322 323 if (version_disp == 0) { 324 version_disp = 1; 325 printk(version); 326 } 327 328 dev->irq = SLOT2IRQ(ndev->board->slot); 329 /* This is getting to be a habit */ 330 dev->base_addr = ndev->board->slot_addr | ((ndev->board->slot&0xf) << 20); 331 332 /* Get some Nubus info - we will trust the card's idea 333 of where its memory and registers are. */ 334 335 if (nubus_get_func_dir(ndev, &dir) == -1) { 336 printk(KERN_ERR "%s: Unable to get Nubus functional" 337 " directory for slot %X!\n", 338 dev->name, ndev->board->slot); 339 continue; 340 } 341 342 /* Get the MAC address */ 343 if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) { 344 printk(KERN_INFO "%s: Couldn't get MAC address!\n", 345 dev->name); 346 continue; 347 } else { 348 nubus_get_rsrc_mem(dev->dev_addr, &ent, 6); 349 } 350 351 if (useresources[cardtype] == 1) { 352 nubus_rewinddir(&dir); 353 if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) { 354 printk(KERN_ERR "%s: Memory offset resource" 355 " for slot %X not found!\n", 356 dev->name, ndev->board->slot); 357 continue; 358 } 359 nubus_get_rsrc_mem(&offset, &ent, 4); 360 dev->mem_start = dev->base_addr + offset; 361 /* yes, this is how the Apple driver does it */ 362 dev->base_addr = dev->mem_start + 0x10000; 363 nubus_rewinddir(&dir); 364 if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) { 365 printk(KERN_INFO "%s: Memory length resource" 366 " for slot %X not found" 367 ", probing\n", 368 dev->name, ndev->board->slot); 369 offset = mac8390_memsize(dev->mem_start); 370 } else { 371 nubus_get_rsrc_mem(&offset, &ent, 4); 372 } 373 dev->mem_end = dev->mem_start + offset; 374 } else { 375 switch (cardtype) { 376 case MAC8390_KINETICS: 377 case MAC8390_DAYNA: /* it's the same */ 378 dev->base_addr = 379 (int)(ndev->board->slot_addr + 380 DAYNA_8390_BASE); 381 dev->mem_start = 382 (int)(ndev->board->slot_addr + 383 DAYNA_8390_MEM); 384 dev->mem_end = 385 dev->mem_start + 386 mac8390_memsize(dev->mem_start); 387 break; 388 case MAC8390_INTERLAN: 389 dev->base_addr = 390 (int)(ndev->board->slot_addr + 391 INTERLAN_8390_BASE); 392 dev->mem_start = 393 (int)(ndev->board->slot_addr + 394 INTERLAN_8390_MEM); 395 dev->mem_end = 396 dev->mem_start + 397 mac8390_memsize(dev->mem_start); 398 break; 399 case MAC8390_CABLETRON: 400 dev->base_addr = 401 (int)(ndev->board->slot_addr + 402 CABLETRON_8390_BASE); 403 dev->mem_start = 404 (int)(ndev->board->slot_addr + 405 CABLETRON_8390_MEM); 406 /* The base address is unreadable if 0x00 407 * has been written to the command register 408 * Reset the chip by writing E8390_NODMA + 409 * E8390_PAGE0 + E8390_STOP just to be 410 * sure 411 */ 412 i = (void *)dev->base_addr; 413 *i = 0x21; 414 dev->mem_end = 415 dev->mem_start + 416 mac8390_memsize(dev->mem_start); 417 break; 418 419 default: 420 printk(KERN_ERR "Card type %s is" 421 " unsupported, sorry\n", 422 ndev->board->name); 423 continue; 424 } 425 } 426 427 /* Do the nasty 8390 stuff */ 428 if (!mac8390_initdev(dev, ndev, cardtype)) 429 break; 430 } 431 432 if (!ndev) 433 goto out; 434 err = register_netdev(dev); 435 if (err) 436 goto out; 437 return dev; 438 439out: 440 free_netdev(dev); 441 return ERR_PTR(err); 442} 443 444#ifdef MODULE 445MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others"); 446MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver"); 447MODULE_LICENSE("GPL"); 448 449/* overkill, of course */ 450static struct net_device *dev_mac8390[15]; 451int init_module(void) 452{ 453 int i; 454 for (i = 0; i < 15; i++) { 455 struct net_device *dev = mac8390_probe(-1); 456 if (IS_ERR(dev)) 457 break; 458 dev_mac890[i] = dev; 459 } 460 if (!i) { 461 printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n"); 462 return -ENODEV; 463 } 464 return 0; 465} 466 467void cleanup_module(void) 468{ 469 int i; 470 for (i = 0; i < 15; i++) { 471 struct net_device *dev = dev_mac890[i]; 472 if (dev) { 473 unregister_netdev(dev); 474 free_netdev(dev); 475 } 476 } 477} 478 479#endif /* MODULE */ 480 481static const struct net_device_ops mac8390_netdev_ops = { 482 .ndo_open = mac8390_open, 483 .ndo_stop = mac8390_close, 484 .ndo_start_xmit = ei_start_xmit, 485 .ndo_tx_timeout = ei_tx_timeout, 486 .ndo_get_stats = ei_get_stats, 487 .ndo_set_multicast_list = ei_set_multicast_list, 488 .ndo_validate_addr = eth_validate_addr, 489 .ndo_set_mac_address = eth_mac_addr, 490 .ndo_change_mtu = eth_change_mtu, 491#ifdef CONFIG_NET_POLL_CONTROLLER 492 .ndo_poll_controller = ei_poll, 493#endif 494}; 495 496static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev, 497 enum mac8390_type type) 498{ 499 static u32 fwrd4_offsets[16]={ 500 0, 4, 8, 12, 501 16, 20, 24, 28, 502 32, 36, 40, 44, 503 48, 52, 56, 60 504 }; 505 static u32 back4_offsets[16]={ 506 60, 56, 52, 48, 507 44, 40, 36, 32, 508 28, 24, 20, 16, 509 12, 8, 4, 0 510 }; 511 static u32 fwrd2_offsets[16]={ 512 0, 2, 4, 6, 513 8, 10, 12, 14, 514 16, 18, 20, 22, 515 24, 26, 28, 30 516 }; 517 518 int access_bitmode = 0; 519 520 /* Now fill in our stuff */ 521 dev->netdev_ops = &mac8390_netdev_ops; 522 523 /* GAR, ei_status is actually a macro even though it looks global */ 524 ei_status.name = cardname[type]; 525 ei_status.word16 = word16[type]; 526 527 /* Cabletron's TX/RX buffers are backwards */ 528 if (type == MAC8390_CABLETRON) { 529 ei_status.tx_start_page = CABLETRON_TX_START_PG; 530 ei_status.rx_start_page = CABLETRON_RX_START_PG; 531 ei_status.stop_page = CABLETRON_RX_STOP_PG; 532 ei_status.rmem_start = dev->mem_start; 533 ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256; 534 } else { 535 ei_status.tx_start_page = WD_START_PG; 536 ei_status.rx_start_page = WD_START_PG + TX_PAGES; 537 ei_status.stop_page = (dev->mem_end - dev->mem_start)/256; 538 ei_status.rmem_start = dev->mem_start + TX_PAGES*256; 539 ei_status.rmem_end = dev->mem_end; 540 } 541 542 /* Fill in model-specific information and functions */ 543 switch(type) { 544 case MAC8390_FARALLON: 545 case MAC8390_APPLE: 546 switch(mac8390_testio(dev->mem_start)) { 547 case ACCESS_UNKNOWN: 548 printk("Don't know how to access card memory!\n"); 549 return -ENODEV; 550 break; 551 552 case ACCESS_16: 553 /* 16 bit card, register map is reversed */ 554 ei_status.reset_8390 = &mac8390_no_reset; 555 ei_status.block_input = &slow_sane_block_input; 556 ei_status.block_output = &slow_sane_block_output; 557 ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; 558 ei_status.reg_offset = back4_offsets; 559 break; 560 561 case ACCESS_32: 562 /* 32 bit card, register map is reversed */ 563 ei_status.reset_8390 = &mac8390_no_reset; 564 ei_status.block_input = &sane_block_input; 565 ei_status.block_output = &sane_block_output; 566 ei_status.get_8390_hdr = &sane_get_8390_hdr; 567 ei_status.reg_offset = back4_offsets; 568 access_bitmode = 1; 569 break; 570 } 571 break; 572 573 case MAC8390_ASANTE: 574 /* Some Asante cards pass the 32 bit test 575 * but overwrite system memory when run at 32 bit. 576 * so we run them all at 16 bit. 577 */ 578 ei_status.reset_8390 = &mac8390_no_reset; 579 ei_status.block_input = &slow_sane_block_input; 580 ei_status.block_output = &slow_sane_block_output; 581 ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; 582 ei_status.reg_offset = back4_offsets; 583 break; 584 585 case MAC8390_CABLETRON: 586 /* 16 bit card, register map is short forward */ 587 ei_status.reset_8390 = &mac8390_no_reset; 588 ei_status.block_input = &slow_sane_block_input; 589 ei_status.block_output = &slow_sane_block_output; 590 ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; 591 ei_status.reg_offset = fwrd2_offsets; 592 break; 593 594 case MAC8390_DAYNA: 595 case MAC8390_KINETICS: 596 /* 16 bit memory, register map is forward */ 597 /* dayna and similar */ 598 ei_status.reset_8390 = &mac8390_no_reset; 599 ei_status.block_input = &dayna_block_input; 600 ei_status.block_output = &dayna_block_output; 601 ei_status.get_8390_hdr = &dayna_get_8390_hdr; 602 ei_status.reg_offset = fwrd4_offsets; 603 break; 604 605 case MAC8390_INTERLAN: 606 /* 16 bit memory, register map is forward */ 607 ei_status.reset_8390 = &interlan_reset; 608 ei_status.block_input = &slow_sane_block_input; 609 ei_status.block_output = &slow_sane_block_output; 610 ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; 611 ei_status.reg_offset = fwrd4_offsets; 612 break; 613 614 default: 615 printk(KERN_ERR "Card type %s is unsupported, sorry\n", ndev->board->name); 616 return -ENODEV; 617 } 618 619 __NS8390_init(dev, 0); 620 621 /* Good, done, now spit out some messages */ 622 printk(KERN_INFO "%s: %s in slot %X (type %s)\n", 623 dev->name, ndev->board->name, ndev->board->slot, cardname[type]); 624 printk(KERN_INFO "MAC "); 625 { 626 int i; 627 for (i = 0; i < 6; i++) { 628 printk("%2.2x", dev->dev_addr[i]); 629 if (i < 5) 630 printk(":"); 631 } 632 } 633 printk(" IRQ %d, %d KB shared memory at %#lx, %d-bit access.\n", 634 dev->irq, (int)((dev->mem_end - dev->mem_start)/0x1000) * 4, 635 dev->mem_start, access_bitmode?32:16); 636 return 0; 637} 638 639static int mac8390_open(struct net_device *dev) 640{ 641 __ei_open(dev); 642 if (request_irq(dev->irq, __ei_interrupt, 0, "8390 Ethernet", dev)) { 643 printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq); 644 return -EAGAIN; 645 } 646 return 0; 647} 648 649static int mac8390_close(struct net_device *dev) 650{ 651 free_irq(dev->irq, dev); 652 __ei_close(dev); 653 return 0; 654} 655 656static void mac8390_no_reset(struct net_device *dev) 657{ 658 ei_status.txing = 0; 659 if (ei_debug > 1) 660 printk("reset not supported\n"); 661 return; 662} 663 664static void interlan_reset(struct net_device *dev) 665{ 666 unsigned char *target=nubus_slot_addr(IRQ2SLOT(dev->irq)); 667 if (ei_debug > 1) 668 printk("Need to reset the NS8390 t=%lu...", jiffies); 669 ei_status.txing = 0; 670 target[0xC0000] = 0; 671 if (ei_debug > 1) 672 printk("reset complete\n"); 673 return; 674} 675 676/* dayna_memcpy_fromio/dayna_memcpy_toio */ 677/* directly from daynaport.c by Alan Cox */ 678static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, int count) 679{ 680 volatile unsigned char *ptr; 681 unsigned char *target=to; 682 from<<=1; /* word, skip overhead */ 683 ptr=(unsigned char *)(dev->mem_start+from); 684 /* Leading byte? */ 685 if (from&2) { 686 *target++ = ptr[-1]; 687 ptr += 2; 688 count--; 689 } 690 while(count>=2) 691 { 692 *(unsigned short *)target = *(unsigned short volatile *)ptr; 693 ptr += 4; /* skip cruft */ 694 target += 2; 695 count-=2; 696 } 697 /* Trailing byte? */ 698 if(count) 699 *target = *ptr; 700} 701 702static void dayna_memcpy_tocard(struct net_device *dev, int to, const void *from, int count) 703{ 704 volatile unsigned short *ptr; 705 const unsigned char *src=from; 706 to<<=1; /* word, skip overhead */ 707 ptr=(unsigned short *)(dev->mem_start+to); 708 /* Leading byte? */ 709 if (to&2) { /* avoid a byte write (stomps on other data) */ 710 ptr[-1] = (ptr[-1]&0xFF00)|*src++; 711 ptr++; 712 count--; 713 } 714 while(count>=2) 715 { 716 *ptr++=*(unsigned short *)src; /* Copy and */ 717 ptr++; /* skip cruft */ 718 src += 2; 719 count-=2; 720 } 721 /* Trailing byte? */ 722 if(count) 723 { 724 /* card doesn't like byte writes */ 725 *ptr=(*ptr&0x00FF)|(*src << 8); 726 } 727} 728 729/* sane block input/output */ 730static void sane_get_8390_hdr(struct net_device *dev, 731 struct e8390_pkt_hdr *hdr, int ring_page) 732{ 733 unsigned long hdr_start = (ring_page - WD_START_PG)<<8; 734 memcpy_fromio((void *)hdr, (char *)dev->mem_start + hdr_start, 4); 735 /* Fix endianness */ 736 hdr->count = swab16(hdr->count); 737} 738 739static void sane_block_input(struct net_device *dev, int count, 740 struct sk_buff *skb, int ring_offset) 741{ 742 unsigned long xfer_base = ring_offset - (WD_START_PG<<8); 743 unsigned long xfer_start = xfer_base + dev->mem_start; 744 745 if (xfer_start + count > ei_status.rmem_end) { 746 /* We must wrap the input move. */ 747 int semi_count = ei_status.rmem_end - xfer_start; 748 memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, semi_count); 749 count -= semi_count; 750 memcpy_toio(skb->data + semi_count, (char *)ei_status.rmem_start, count); 751 } else { 752 memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, count); 753 } 754} 755 756static void sane_block_output(struct net_device *dev, int count, 757 const unsigned char *buf, int start_page) 758{ 759 long shmem = (start_page - WD_START_PG)<<8; 760 761 memcpy_toio((char *)dev->mem_start + shmem, buf, count); 762} 763 764/* dayna block input/output */ 765static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) 766{ 767 unsigned long hdr_start = (ring_page - WD_START_PG)<<8; 768 769 dayna_memcpy_fromcard(dev, (void *)hdr, hdr_start, 4); 770 /* Fix endianness */ 771 hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8); 772} 773 774static void dayna_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) 775{ 776 unsigned long xfer_base = ring_offset - (WD_START_PG<<8); 777 unsigned long xfer_start = xfer_base+dev->mem_start; 778 779 /* Note the offset math is done in card memory space which is word 780 per long onto our space. */ 781 782 if (xfer_start + count > ei_status.rmem_end) 783 { 784 /* We must wrap the input move. */ 785 int semi_count = ei_status.rmem_end - xfer_start; 786 dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count); 787 count -= semi_count; 788 dayna_memcpy_fromcard(dev, skb->data + semi_count, 789 ei_status.rmem_start - dev->mem_start, 790 count); 791 } 792 else 793 { 794 dayna_memcpy_fromcard(dev, skb->data, xfer_base, count); 795 } 796} 797 798static void dayna_block_output(struct net_device *dev, int count, const unsigned char *buf, 799 int start_page) 800{ 801 long shmem = (start_page - WD_START_PG)<<8; 802 803 dayna_memcpy_tocard(dev, shmem, buf, count); 804} 805 806/* Cabletron block I/O */ 807static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, 808 int ring_page) 809{ 810 unsigned long hdr_start = (ring_page - WD_START_PG)<<8; 811 word_memcpy_fromcard((void *)hdr, (char *)dev->mem_start+hdr_start, 4); 812 /* Register endianism - fix here rather than 8390.c */ 813 hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8); 814} 815 816static void slow_sane_block_input(struct net_device *dev, int count, struct sk_buff *skb, 817 int ring_offset) 818{ 819 unsigned long xfer_base = ring_offset - (WD_START_PG<<8); 820 unsigned long xfer_start = xfer_base+dev->mem_start; 821 822 if (xfer_start + count > ei_status.rmem_end) 823 { 824 /* We must wrap the input move. */ 825 int semi_count = ei_status.rmem_end - xfer_start; 826 word_memcpy_fromcard(skb->data, (char *)dev->mem_start + 827 xfer_base, semi_count); 828 count -= semi_count; 829 word_memcpy_fromcard(skb->data + semi_count, 830 (char *)ei_status.rmem_start, count); 831 } 832 else 833 { 834 word_memcpy_fromcard(skb->data, (char *)dev->mem_start + 835 xfer_base, count); 836 } 837} 838 839static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf, 840 int start_page) 841{ 842 long shmem = (start_page - WD_START_PG)<<8; 843 844 word_memcpy_tocard((char *)dev->mem_start + shmem, buf, count); 845} 846 847static void word_memcpy_tocard(void *tp, const void *fp, int count) 848{ 849 volatile unsigned short *to = tp; 850 const unsigned short *from = fp; 851 852 count++; 853 count/=2; 854 855 while(count--) 856 *to++=*from++; 857} 858 859static void word_memcpy_fromcard(void *tp, const void *fp, int count) 860{ 861 unsigned short *to = tp; 862 const volatile unsigned short *from = fp; 863 864 count++; 865 count/=2; 866 867 while(count--) 868 *to++=*from++; 869} 870 871