tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1
2/*
3 * Radio tuning for Philips SA2400 on RTL8180
4 *
5 * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
6 *
7 * Code from the BSD driver and the rtl8181 project have been
8 * very useful to understand certain things
9 *
10 * I want to thanks the Authors of such projects and the Ndiswrapper
11 * project Authors.
12 *
13 * A special Big Thanks also is for all people who donated me cards,
14 * making possible the creation of the original rtl8180 driver
15 * from which this code is derived!
16 *
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
20 */
21
22#include <linux/init.h>
23#include <linux/pci.h>
24#include <linux/delay.h>
25#include <net/mac80211.h>
26
27#include "rtl8180.h"
28#include "rtl8180_sa2400.h"
29
30static const u32 sa2400_chan[] = {
31 0x00096c, /* ch1 */
32 0x080970,
33 0x100974,
34 0x180978,
35 0x000980,
36 0x080984,
37 0x100988,
38 0x18098c,
39 0x000994,
40 0x080998,
41 0x10099c,
42 0x1809a0,
43 0x0009a8,
44 0x0009b4, /* ch 14 */
45};
46
47static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data)
48{
49 struct rtl8180_priv *priv = dev->priv;
50 u32 phy_config;
51
52 /* MAC will bang bits to the sa2400. sw 3-wire is NOT used */
53 phy_config = 0xb0000000;
54
55 phy_config |= ((u32)(addr & 0xf)) << 24;
56 phy_config |= data & 0xffffff;
57
58 rtl818x_iowrite32(priv,
59 (__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
60
61 msleep(3);
62}
63
64static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan)
65{
66 struct rtl8180_priv *priv = dev->priv;
67 u8 ant = SA2400_ANTENNA;
68
69 if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
70 ant |= BB_ANTENNA_B;
71
72 if (chan == 14)
73 ant |= BB_ANTATTEN_CHAN14;
74
75 rtl8180_write_phy(dev, 0x10, ant);
76
77}
78
79static void sa2400_rf_set_channel(struct ieee80211_hw *dev,
80 struct ieee80211_conf *conf)
81{
82 struct rtl8180_priv *priv = dev->priv;
83 int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
84 u32 txpw = priv->channels[channel - 1].hw_value & 0xFF;
85 u32 chan = sa2400_chan[channel - 1];
86
87 write_sa2400(dev, 7, txpw);
88
89 sa2400_write_phy_antenna(dev, channel);
90
91 write_sa2400(dev, 0, chan);
92 write_sa2400(dev, 1, 0xbb50);
93 write_sa2400(dev, 2, 0x80);
94 write_sa2400(dev, 3, 0);
95}
96
97static void sa2400_rf_stop(struct ieee80211_hw *dev)
98{
99 write_sa2400(dev, 4, 0);
100}
101
102static void sa2400_rf_init(struct ieee80211_hw *dev)
103{
104 struct rtl8180_priv *priv = dev->priv;
105 u32 anaparam, txconf;
106 u8 firdac;
107 int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY;
108
109 anaparam = priv->anaparam;
110 anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT);
111 anaparam &= ~ANAPARAM_PWR1_MASK;
112 anaparam &= ~ANAPARAM_PWR0_MASK;
113
114 if (analogphy) {
115 anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT;
116 firdac = 0;
117 } else {
118 anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT);
119 anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT);
120 firdac = 1 << SA2400_REG4_FIRDAC_SHIFT;
121 }
122
123 rtl8180_set_anaparam(priv, anaparam);
124
125 write_sa2400(dev, 0, sa2400_chan[0]);
126 write_sa2400(dev, 1, 0xbb50);
127 write_sa2400(dev, 2, 0x80);
128 write_sa2400(dev, 3, 0);
129 write_sa2400(dev, 4, 0x19340 | firdac);
130 write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15);
131 write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */
132
133 if (!analogphy)
134 write_sa2400(dev, 4, 0x1938c); /*???*/
135
136 write_sa2400(dev, 4, 0x19340 | firdac);
137
138 write_sa2400(dev, 0, sa2400_chan[0]);
139 write_sa2400(dev, 1, 0xbb50);
140 write_sa2400(dev, 2, 0x80);
141 write_sa2400(dev, 3, 0);
142 write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */
143
144 /* new from rtl8180 embedded driver (rtl8181 project) */
145 write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */
146 write_sa2400(dev, 8, 0); /* VCO */
147
148 if (analogphy) {
149 rtl8180_set_anaparam(priv, anaparam |
150 (1 << ANAPARAM_TXDACOFF_SHIFT));
151
152 txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF);
153 rtl818x_iowrite32(priv, &priv->map->TX_CONF,
154 txconf | RTL818X_TX_CONF_LOOPBACK_CONT);
155
156 write_sa2400(dev, 4, 0x19341); /* calibrates DC */
157
158 /* a 5us sleep is required here,
159 * we rely on the 3ms delay introduced in write_sa2400 */
160 write_sa2400(dev, 4, 0x19345);
161
162 /* a 20us sleep is required here,
163 * we rely on the 3ms delay introduced in write_sa2400 */
164
165 rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf);
166
167 rtl8180_set_anaparam(priv, anaparam);
168 }
169 /* end new code */
170
171 write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */
172
173 /* baseband configuration */
174 rtl8180_write_phy(dev, 0, 0x98);
175 rtl8180_write_phy(dev, 3, 0x38);
176 rtl8180_write_phy(dev, 4, 0xe0);
177 rtl8180_write_phy(dev, 5, 0x90);
178 rtl8180_write_phy(dev, 6, 0x1a);
179 rtl8180_write_phy(dev, 7, 0x64);
180
181 sa2400_write_phy_antenna(dev, 1);
182
183 rtl8180_write_phy(dev, 0x11, 0x80);
184
185 if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
186 RTL818X_CONFIG2_ANTENNA_DIV)
187 rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */
188 else
189 rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */
190
191 rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
192
193 rtl8180_write_phy(dev, 0x19, 0x0);
194 rtl8180_write_phy(dev, 0x1a, 0xa0);
195}
196
197const struct rtl818x_rf_ops sa2400_rf_ops = {
198 .name = "Philips",
199 .init = sa2400_rf_init,
200 .stop = sa2400_rf_stop,
201 .set_chan = sa2400_rf_set_channel
202};