Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v2.6.27-rc2 144 lines 3.8 kB view raw
1/* 2 * Created 20 Oct 2004 by Mark Lord 3 * 4 * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter 5 * 6 * Modeled after the 16-bit PCMCIA driver: ide-cs.c 7 * 8 * This is slightly peculiar, in that it is a PCI driver, 9 * but is NOT an IDE PCI driver -- the IDE layer does not directly 10 * support hot insertion/removal of PCI interfaces, so this driver 11 * is unable to use the IDE PCI interfaces. Instead, it uses the 12 * same interfaces as the ide-cs (PCMCIA) driver uses. 13 * On the plus side, the driver is also smaller/simpler this way. 14 * 15 * This file is subject to the terms and conditions of the GNU General Public 16 * License. See the file COPYING in the main directory of this archive for 17 * more details. 18 */ 19 20#include <linux/types.h> 21#include <linux/module.h> 22#include <linux/hdreg.h> 23#include <linux/ide.h> 24#include <linux/init.h> 25#include <linux/pci.h> 26 27#include <asm/io.h> 28 29/* 30 * No chip documentation has yet been found, 31 * so these configuration values were pulled from 32 * a running Win98 system using "debug". 33 * This gives around 3MByte/second read performance, 34 * which is about 2/3 of what the chip is capable of. 35 * 36 * There is also a 4KByte mmio region on the card, 37 * but its purpose has yet to be reverse-engineered. 38 */ 39static const u8 setup[] = { 40 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00, 41 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80, 42 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 43 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13, 44}; 45 46static const struct ide_port_ops delkin_cb_port_ops = { 47 .quirkproc = ide_undecoded_slave, 48}; 49 50static const struct ide_port_info delkin_cb_port_info = { 51 .port_ops = &delkin_cb_port_ops, 52 .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | 53 IDE_HFLAG_NO_DMA, 54}; 55 56static int __devinit 57delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) 58{ 59 struct ide_host *host; 60 unsigned long base; 61 int i, rc; 62 hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; 63 64 rc = pci_enable_device(dev); 65 if (rc) { 66 printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc); 67 return rc; 68 } 69 rc = pci_request_regions(dev, "delkin_cb"); 70 if (rc) { 71 printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc); 72 pci_disable_device(dev); 73 return rc; 74 } 75 base = pci_resource_start(dev, 0); 76 outb(0x02, base + 0x1e); /* set nIEN to block interrupts */ 77 inb(base + 0x17); /* read status to clear interrupts */ 78 for (i = 0; i < sizeof(setup); ++i) { 79 if (setup[i]) 80 outb(setup[i], base + i); 81 } 82 83 memset(&hw, 0, sizeof(hw)); 84 ide_std_init_ports(&hw, base + 0x10, base + 0x1e); 85 hw.irq = dev->irq; 86 hw.dev = &dev->dev; 87 hw.chipset = ide_pci; /* this enables IRQ sharing */ 88 89 rc = ide_host_add(&delkin_cb_port_info, hws, &host); 90 if (rc) 91 goto out_disable; 92 93 pci_set_drvdata(dev, host); 94 95 return 0; 96 97out_disable: 98 pci_release_regions(dev); 99 pci_disable_device(dev); 100 return rc; 101} 102 103static void 104delkin_cb_remove (struct pci_dev *dev) 105{ 106 struct ide_host *host = pci_get_drvdata(dev); 107 108 ide_host_remove(host); 109 110 pci_release_regions(dev); 111 pci_disable_device(dev); 112} 113 114static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = { 115 { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 116 { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 117 { 0, }, 118}; 119MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl); 120 121static struct pci_driver driver = { 122 .name = "Delkin-ASKA-Workbit Cardbus IDE", 123 .id_table = delkin_cb_pci_tbl, 124 .probe = delkin_cb_probe, 125 .remove = delkin_cb_remove, 126}; 127 128static int __init delkin_cb_init(void) 129{ 130 return pci_register_driver(&driver); 131} 132 133static void __exit delkin_cb_exit(void) 134{ 135 pci_unregister_driver(&driver); 136} 137 138module_init(delkin_cb_init); 139module_exit(delkin_cb_exit); 140 141MODULE_AUTHOR("Mark Lord"); 142MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE"); 143MODULE_LICENSE("GPL"); 144