tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1#ifndef LINUX_SSB_PCICORE_H_
2#define LINUX_SSB_PCICORE_H_
3
4#ifdef CONFIG_SSB_DRIVER_PCICORE
5
6/* PCI core registers. */
7#define SSB_PCICORE_CTL 0x0000 /* PCI Control */
8#define SSB_PCICORE_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
9#define SSB_PCICORE_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
10#define SSB_PCICORE_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
11#define SSB_PCICORE_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
12#define SSB_PCICORE_ARBCTL 0x0010 /* PCI Arbiter Control */
13#define SSB_PCICORE_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
14#define SSB_PCICORE_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
15#define SSB_PCICORE_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
16#define SSB_PCICORE_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
17#define SSB_PCICORE_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
18#define SSB_PCICORE_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
19#define SSB_PCICORE_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
20#define SSB_PCICORE_ISTAT 0x0020 /* Interrupt status */
21#define SSB_PCICORE_ISTAT_INTA 0x00000001 /* PCI INTA# */
22#define SSB_PCICORE_ISTAT_INTB 0x00000002 /* PCI INTB# */
23#define SSB_PCICORE_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
24#define SSB_PCICORE_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
25#define SSB_PCICORE_ISTAT_PME 0x00000010 /* PCI PME# */
26#define SSB_PCICORE_IMASK 0x0024 /* Interrupt mask */
27#define SSB_PCICORE_IMASK_INTA 0x00000001 /* PCI INTA# */
28#define SSB_PCICORE_IMASK_INTB 0x00000002 /* PCI INTB# */
29#define SSB_PCICORE_IMASK_SERR 0x00000004 /* PCI SERR# */
30#define SSB_PCICORE_IMASK_PERR 0x00000008 /* PCI PERR# */
31#define SSB_PCICORE_IMASK_PME 0x00000010 /* PCI PME# */
32#define SSB_PCICORE_MBOX 0x0028 /* Backplane to PCI Mailbox */
33#define SSB_PCICORE_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
34#define SSB_PCICORE_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
35#define SSB_PCICORE_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
36#define SSB_PCICORE_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
37#define SSB_PCICORE_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
38#define SSB_PCICORE_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
39#define SSB_PCICORE_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
40#define SSB_PCICORE_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
41#define SSB_PCICORE_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
42#define SSB_PCICORE_BCAST_ADDR_MASK 0x000000FF
43#define SSB_PCICORE_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
44#define SSB_PCICORE_GPIO_IN 0x0060 /* rev >= 2 only */
45#define SSB_PCICORE_GPIO_OUT 0x0064 /* rev >= 2 only */
46#define SSB_PCICORE_GPIO_ENABLE 0x0068 /* rev >= 2 only */
47#define SSB_PCICORE_GPIO_CTL 0x006C /* rev >= 2 only */
48#define SSB_PCICORE_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
49#define SSB_PCICORE_SBTOPCI0_MASK 0xFC000000
50#define SSB_PCICORE_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
51#define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000
52#define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
53#define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000
54#define SSB_PCICORE_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
55#define SSB_PCICORE_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
56#define SSB_PCICORE_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
57#define SSB_PCICORE_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
58#define SSB_PCICORE_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
59
60/* SBtoPCIx */
61#define SSB_PCICORE_SBTOPCI_MEM 0x00000000
62#define SSB_PCICORE_SBTOPCI_IO 0x00000001
63#define SSB_PCICORE_SBTOPCI_CFG0 0x00000002
64#define SSB_PCICORE_SBTOPCI_CFG1 0x00000003
65#define SSB_PCICORE_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
66#define SSB_PCICORE_SBTOPCI_BURST 0x00000008 /* Burst enable */
67#define SSB_PCICORE_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
68#define SSB_PCICORE_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
69#define SSB_PCICORE_SBTOPCI_RC_READ 0x00000000 /* Memory read */
70#define SSB_PCICORE_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
71#define SSB_PCICORE_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
72
73
74/* PCIcore specific boardflags */
75#define SSB_PCICORE_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
76
77
78struct ssb_pcicore {
79 struct ssb_device *dev;
80 u8 setup_done:1;
81 u8 hostmode:1;
82 u8 cardbusmode:1;
83};
84
85extern void ssb_pcicore_init(struct ssb_pcicore *pc);
86
87/* Enable IRQ routing for a specific device */
88extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
89 struct ssb_device *dev);
90
91
92#else /* CONFIG_SSB_DRIVER_PCICORE */
93
94
95struct ssb_pcicore {
96};
97
98static inline
99void ssb_pcicore_init(struct ssb_pcicore *pc)
100{
101}
102
103static inline
104int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
105 struct ssb_device *dev)
106{
107 return 0;
108}
109
110#endif /* CONFIG_SSB_DRIVER_PCICORE */
111#endif /* LINUX_SSB_PCICORE_H_ */