Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/*
2 * include/linux/fsl_devices.h
3 *
4 * Definitions for any platform device related flags or structures for
5 * Freescale processor devices
6 *
7 * Maintainer: Kumar Gala <galak@kernel.crashing.org>
8 *
9 * Copyright 2004 Freescale Semiconductor, Inc
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 */
16
17#ifdef __KERNEL__
18#ifndef _FSL_DEVICE_H_
19#define _FSL_DEVICE_H_
20
21#include <linux/types.h>
22#include <linux/phy.h>
23
24/*
25 * Some conventions on how we handle peripherals on Freescale chips
26 *
27 * unique device: a platform_device entry in fsl_plat_devs[] plus
28 * associated device information in its platform_data structure.
29 *
30 * A chip is described by a set of unique devices.
31 *
32 * Each sub-arch has its own master list of unique devices and
33 * enumerates them by enum fsl_devices in a sub-arch specific header
34 *
35 * The platform data structure is broken into two parts. The
36 * first is device specific information that help identify any
37 * unique features of a peripheral. The second is any
38 * information that may be defined by the board or how the device
39 * is connected externally of the chip.
40 *
41 * naming conventions:
42 * - platform data structures: <driver>_platform_data
43 * - platform data device flags: FSL_<driver>_DEV_<FLAG>
44 * - platform data board flags: FSL_<driver>_BRD_<FLAG>
45 *
46 */
47
48struct gianfar_platform_data {
49 /* device specific information */
50 u32 device_flags;
51 /* board specific information */
52 u32 board_flags;
53 u32 bus_id;
54 u32 phy_id;
55 u8 mac_addr[6];
56 phy_interface_t interface;
57};
58
59struct gianfar_mdio_data {
60 /* board specific information */
61 int irq[32];
62};
63
64/* Flags related to gianfar device features */
65#define FSL_GIANFAR_DEV_HAS_GIGABIT 0x00000001
66#define FSL_GIANFAR_DEV_HAS_COALESCE 0x00000002
67#define FSL_GIANFAR_DEV_HAS_RMON 0x00000004
68#define FSL_GIANFAR_DEV_HAS_MULTI_INTR 0x00000008
69#define FSL_GIANFAR_DEV_HAS_CSUM 0x00000010
70#define FSL_GIANFAR_DEV_HAS_VLAN 0x00000020
71#define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH 0x00000040
72#define FSL_GIANFAR_DEV_HAS_PADDING 0x00000080
73
74/* Flags in gianfar_platform_data */
75#define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */
76#define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */
77
78struct fsl_i2c_platform_data {
79 /* device specific information */
80 u32 device_flags;
81};
82
83/* Flags related to I2C device features */
84#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
85#define FSL_I2C_DEV_CLOCK_5200 0x00000002
86
87enum fsl_usb2_operating_modes {
88 FSL_USB2_MPH_HOST,
89 FSL_USB2_DR_HOST,
90 FSL_USB2_DR_DEVICE,
91 FSL_USB2_DR_OTG,
92};
93
94enum fsl_usb2_phy_modes {
95 FSL_USB2_PHY_NONE,
96 FSL_USB2_PHY_ULPI,
97 FSL_USB2_PHY_UTMI,
98 FSL_USB2_PHY_UTMI_WIDE,
99 FSL_USB2_PHY_SERIAL,
100};
101
102struct fsl_usb2_platform_data {
103 /* board specific information */
104 enum fsl_usb2_operating_modes operating_mode;
105 enum fsl_usb2_phy_modes phy_mode;
106 unsigned int port_enables;
107};
108
109/* Flags in fsl_usb2_mph_platform_data */
110#define FSL_USB2_PORT0_ENABLED 0x00000001
111#define FSL_USB2_PORT1_ENABLED 0x00000002
112
113struct fsl_spi_platform_data {
114 u32 initial_spmode; /* initial SPMODE value */
115 u16 bus_num;
116 bool qe_mode;
117 /* board specific information */
118 u16 max_chipselect;
119 void (*activate_cs)(u8 cs, u8 polarity);
120 void (*deactivate_cs)(u8 cs, u8 polarity);
121 u32 sysclk;
122};
123
124struct mpc8xx_pcmcia_ops {
125 void(*hw_ctrl)(int slot, int enable);
126 int(*voltage_set)(int slot, int vcc, int vpp);
127};
128
129#endif /* _FSL_DEVICE_H_ */
130#endif /* __KERNEL__ */