Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
at v2.6.24 950 lines 24 kB view raw
1/* 2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net> 3 Under the terms of the GNU General Public License. 4 5 This is the high-level driver for parallel port IDE hard 6 drives based on chips supported by the paride module. 7 8 By default, the driver will autoprobe for a single parallel 9 port IDE drive, but if their individual parameters are 10 specified, the driver can handle up to 4 drives. 11 12 The behaviour of the pd driver can be altered by setting 13 some parameters from the insmod command line. The following 14 parameters are adjustable: 15 16 drive0 These four arguments can be arrays of 17 drive1 1-8 integers as follows: 18 drive2 19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv> 20 21 Where, 22 23 <prt> is the base of the parallel port address for 24 the corresponding drive. (required) 25 26 <pro> is the protocol number for the adapter that 27 supports this drive. These numbers are 28 logged by 'paride' when the protocol modules 29 are initialised. (0 if not given) 30 31 <uni> for those adapters that support chained 32 devices, this is the unit selector for the 33 chain of devices on the given port. It should 34 be zero for devices that don't support chaining. 35 (0 if not given) 36 37 <mod> this can be -1 to choose the best mode, or one 38 of the mode numbers supported by the adapter. 39 (-1 if not given) 40 41 <geo> this defaults to 0 to indicate that the driver 42 should use the CHS geometry provided by the drive 43 itself. If set to 1, the driver will provide 44 a logical geometry with 64 heads and 32 sectors 45 per track, to be consistent with most SCSI 46 drivers. (0 if not given) 47 48 <sby> set this to zero to disable the power saving 49 standby mode, if needed. (1 if not given) 50 51 <dly> some parallel ports require the driver to 52 go more slowly. -1 sets a default value that 53 should work with the chosen protocol. Otherwise, 54 set this to a small integer, the larger it is 55 the slower the port i/o. In some cases, setting 56 this to zero will speed up the device. (default -1) 57 58 <slv> IDE disks can be jumpered to master or slave. 59 Set this to 0 to choose the master drive, 1 to 60 choose the slave, -1 (the default) to choose the 61 first drive found. 62 63 64 major You may use this parameter to overide the 65 default major number (45) that this driver 66 will use. Be sure to change the device 67 name as well. 68 69 name This parameter is a character string that 70 contains the name the kernel will use for this 71 device (in /proc output, for instance). 72 (default "pd") 73 74 cluster The driver will attempt to aggregate requests 75 for adjacent blocks into larger multi-block 76 clusters. The maximum cluster size (in 512 77 byte sectors) is set with this parameter. 78 (default 64) 79 80 verbose This parameter controls the amount of logging 81 that the driver will do. Set it to 0 for 82 normal operation, 1 to see autoprobe progress 83 messages, or 2 to see additional debugging 84 output. (default 0) 85 86 nice This parameter controls the driver's use of 87 idle CPU time, at the expense of some speed. 88 89 If this driver is built into the kernel, you can use kernel 90 the following command line parameters, with the same values 91 as the corresponding module parameters listed above: 92 93 pd.drive0 94 pd.drive1 95 pd.drive2 96 pd.drive3 97 pd.cluster 98 pd.nice 99 100 In addition, you can use the parameter pd.disable to disable 101 the driver entirely. 102 103*/ 104 105/* Changes: 106 107 1.01 GRG 1997.01.24 Restored pd_reset() 108 Added eject ioctl 109 1.02 GRG 1998.05.06 SMP spinlock changes, 110 Added slave support 111 1.03 GRG 1998.06.16 Eliminate an Ugh. 112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing 113 1.05 GRG 1998.09.24 Added jumbo support 114 115*/ 116 117#define PD_VERSION "1.05" 118#define PD_MAJOR 45 119#define PD_NAME "pd" 120#define PD_UNITS 4 121 122/* Here are things one can override from the insmod command. 123 Most are autoprobed by paride unless set here. Verbose is off 124 by default. 125 126*/ 127 128static int verbose = 0; 129static int major = PD_MAJOR; 130static char *name = PD_NAME; 131static int cluster = 64; 132static int nice = 0; 133static int disable = 0; 134 135static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; 136static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; 137static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; 138static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 }; 139 140static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3}; 141 142enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV}; 143 144/* end of parameters */ 145 146#include <linux/init.h> 147#include <linux/module.h> 148#include <linux/fs.h> 149#include <linux/delay.h> 150#include <linux/hdreg.h> 151#include <linux/cdrom.h> /* for the eject ioctl */ 152#include <linux/blkdev.h> 153#include <linux/blkpg.h> 154#include <linux/kernel.h> 155#include <asm/uaccess.h> 156#include <linux/workqueue.h> 157 158static DEFINE_SPINLOCK(pd_lock); 159 160module_param(verbose, bool, 0); 161module_param(major, int, 0); 162module_param(name, charp, 0); 163module_param(cluster, int, 0); 164module_param(nice, int, 0); 165module_param_array(drive0, int, NULL, 0); 166module_param_array(drive1, int, NULL, 0); 167module_param_array(drive2, int, NULL, 0); 168module_param_array(drive3, int, NULL, 0); 169 170#include "paride.h" 171 172#define PD_BITS 4 173 174/* numbers for "SCSI" geometry */ 175 176#define PD_LOG_HEADS 64 177#define PD_LOG_SECTS 32 178 179#define PD_ID_OFF 54 180#define PD_ID_LEN 14 181 182#define PD_MAX_RETRIES 5 183#define PD_TMO 800 /* interrupt timeout in jiffies */ 184#define PD_SPIN_DEL 50 /* spin delay in micro-seconds */ 185 186#define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL) 187 188#define STAT_ERR 0x00001 189#define STAT_INDEX 0x00002 190#define STAT_ECC 0x00004 191#define STAT_DRQ 0x00008 192#define STAT_SEEK 0x00010 193#define STAT_WRERR 0x00020 194#define STAT_READY 0x00040 195#define STAT_BUSY 0x00080 196 197#define ERR_AMNF 0x00100 198#define ERR_TK0NF 0x00200 199#define ERR_ABRT 0x00400 200#define ERR_MCR 0x00800 201#define ERR_IDNF 0x01000 202#define ERR_MC 0x02000 203#define ERR_UNC 0x04000 204#define ERR_TMO 0x10000 205 206#define IDE_READ 0x20 207#define IDE_WRITE 0x30 208#define IDE_READ_VRFY 0x40 209#define IDE_INIT_DEV_PARMS 0x91 210#define IDE_STANDBY 0x96 211#define IDE_ACKCHANGE 0xdb 212#define IDE_DOORLOCK 0xde 213#define IDE_DOORUNLOCK 0xdf 214#define IDE_IDENTIFY 0xec 215#define IDE_EJECT 0xed 216 217#define PD_NAMELEN 8 218 219struct pd_unit { 220 struct pi_adapter pia; /* interface to paride layer */ 221 struct pi_adapter *pi; 222 int access; /* count of active opens ... */ 223 int capacity; /* Size of this volume in sectors */ 224 int heads; /* physical geometry */ 225 int sectors; 226 int cylinders; 227 int can_lba; 228 int drive; /* master=0 slave=1 */ 229 int changed; /* Have we seen a disk change ? */ 230 int removable; /* removable media device ? */ 231 int standby; 232 int alt_geom; 233 char name[PD_NAMELEN]; /* pda, pdb, etc ... */ 234 struct gendisk *gd; 235}; 236 237static struct pd_unit pd[PD_UNITS]; 238 239static char pd_scratch[512]; /* scratch block buffer */ 240 241static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR", 242 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR", 243 "IDNF", "MC", "UNC", "???", "TMO" 244}; 245 246static inline int status_reg(struct pd_unit *disk) 247{ 248 return pi_read_regr(disk->pi, 1, 6); 249} 250 251static inline int read_reg(struct pd_unit *disk, int reg) 252{ 253 return pi_read_regr(disk->pi, 0, reg); 254} 255 256static inline void write_status(struct pd_unit *disk, int val) 257{ 258 pi_write_regr(disk->pi, 1, 6, val); 259} 260 261static inline void write_reg(struct pd_unit *disk, int reg, int val) 262{ 263 pi_write_regr(disk->pi, 0, reg, val); 264} 265 266static inline u8 DRIVE(struct pd_unit *disk) 267{ 268 return 0xa0+0x10*disk->drive; 269} 270 271/* ide command interface */ 272 273static void pd_print_error(struct pd_unit *disk, char *msg, int status) 274{ 275 int i; 276 277 printk("%s: %s: status = 0x%x =", disk->name, msg, status); 278 for (i = 0; i < ARRAY_SIZE(pd_errs); i++) 279 if (status & (1 << i)) 280 printk(" %s", pd_errs[i]); 281 printk("\n"); 282} 283 284static void pd_reset(struct pd_unit *disk) 285{ /* called only for MASTER drive */ 286 write_status(disk, 4); 287 udelay(50); 288 write_status(disk, 0); 289 udelay(250); 290} 291 292#define DBMSG(msg) ((verbose>1)?(msg):NULL) 293 294static int pd_wait_for(struct pd_unit *disk, int w, char *msg) 295{ /* polled wait */ 296 int k, r, e; 297 298 k = 0; 299 while (k < PD_SPIN) { 300 r = status_reg(disk); 301 k++; 302 if (((r & w) == w) && !(r & STAT_BUSY)) 303 break; 304 udelay(PD_SPIN_DEL); 305 } 306 e = (read_reg(disk, 1) << 8) + read_reg(disk, 7); 307 if (k >= PD_SPIN) 308 e |= ERR_TMO; 309 if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL)) 310 pd_print_error(disk, msg, e); 311 return e; 312} 313 314static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func) 315{ 316 write_reg(disk, 6, DRIVE(disk) + h); 317 write_reg(disk, 1, 0); /* the IDE task file */ 318 write_reg(disk, 2, n); 319 write_reg(disk, 3, s); 320 write_reg(disk, 4, c0); 321 write_reg(disk, 5, c1); 322 write_reg(disk, 7, func); 323 324 udelay(1); 325} 326 327static void pd_ide_command(struct pd_unit *disk, int func, int block, int count) 328{ 329 int c1, c0, h, s; 330 331 if (disk->can_lba) { 332 s = block & 255; 333 c0 = (block >>= 8) & 255; 334 c1 = (block >>= 8) & 255; 335 h = ((block >>= 8) & 15) + 0x40; 336 } else { 337 s = (block % disk->sectors) + 1; 338 h = (block /= disk->sectors) % disk->heads; 339 c0 = (block /= disk->heads) % 256; 340 c1 = (block >>= 8); 341 } 342 pd_send_command(disk, count, s, h, c0, c1, func); 343} 344 345/* The i/o request engine */ 346 347enum action {Fail = 0, Ok = 1, Hold, Wait}; 348 349static struct request *pd_req; /* current request */ 350static enum action (*phase)(void); 351 352static void run_fsm(void); 353 354static void ps_tq_int(struct work_struct *work); 355 356static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int); 357 358static void schedule_fsm(void) 359{ 360 if (!nice) 361 schedule_delayed_work(&fsm_tq, 0); 362 else 363 schedule_delayed_work(&fsm_tq, nice-1); 364} 365 366static void ps_tq_int(struct work_struct *work) 367{ 368 run_fsm(); 369} 370 371static enum action do_pd_io_start(void); 372static enum action pd_special(void); 373static enum action do_pd_read_start(void); 374static enum action do_pd_write_start(void); 375static enum action do_pd_read_drq(void); 376static enum action do_pd_write_done(void); 377 378static struct request_queue *pd_queue; 379static int pd_claimed; 380 381static struct pd_unit *pd_current; /* current request's drive */ 382static PIA *pi_current; /* current request's PIA */ 383 384static void run_fsm(void) 385{ 386 while (1) { 387 enum action res; 388 unsigned long saved_flags; 389 int stop = 0; 390 391 if (!phase) { 392 pd_current = pd_req->rq_disk->private_data; 393 pi_current = pd_current->pi; 394 phase = do_pd_io_start; 395 } 396 397 switch (pd_claimed) { 398 case 0: 399 pd_claimed = 1; 400 if (!pi_schedule_claimed(pi_current, run_fsm)) 401 return; 402 case 1: 403 pd_claimed = 2; 404 pi_current->proto->connect(pi_current); 405 } 406 407 switch(res = phase()) { 408 case Ok: case Fail: 409 pi_disconnect(pi_current); 410 pd_claimed = 0; 411 phase = NULL; 412 spin_lock_irqsave(&pd_lock, saved_flags); 413 end_request(pd_req, res); 414 pd_req = elv_next_request(pd_queue); 415 if (!pd_req) 416 stop = 1; 417 spin_unlock_irqrestore(&pd_lock, saved_flags); 418 if (stop) 419 return; 420 case Hold: 421 schedule_fsm(); 422 return; 423 case Wait: 424 pi_disconnect(pi_current); 425 pd_claimed = 0; 426 } 427 } 428} 429 430static int pd_retries = 0; /* i/o error retry count */ 431static int pd_block; /* address of next requested block */ 432static int pd_count; /* number of blocks still to do */ 433static int pd_run; /* sectors in current cluster */ 434static int pd_cmd; /* current command READ/WRITE */ 435static char *pd_buf; /* buffer for request in progress */ 436 437static enum action do_pd_io_start(void) 438{ 439 if (blk_special_request(pd_req)) { 440 phase = pd_special; 441 return pd_special(); 442 } 443 444 pd_cmd = rq_data_dir(pd_req); 445 if (pd_cmd == READ || pd_cmd == WRITE) { 446 pd_block = pd_req->sector; 447 pd_count = pd_req->current_nr_sectors; 448 if (pd_block + pd_count > get_capacity(pd_req->rq_disk)) 449 return Fail; 450 pd_run = pd_req->nr_sectors; 451 pd_buf = pd_req->buffer; 452 pd_retries = 0; 453 if (pd_cmd == READ) 454 return do_pd_read_start(); 455 else 456 return do_pd_write_start(); 457 } 458 return Fail; 459} 460 461static enum action pd_special(void) 462{ 463 enum action (*func)(struct pd_unit *) = pd_req->special; 464 return func(pd_current); 465} 466 467static int pd_next_buf(void) 468{ 469 unsigned long saved_flags; 470 471 pd_count--; 472 pd_run--; 473 pd_buf += 512; 474 pd_block++; 475 if (!pd_run) 476 return 1; 477 if (pd_count) 478 return 0; 479 spin_lock_irqsave(&pd_lock, saved_flags); 480 end_request(pd_req, 1); 481 pd_count = pd_req->current_nr_sectors; 482 pd_buf = pd_req->buffer; 483 spin_unlock_irqrestore(&pd_lock, saved_flags); 484 return 0; 485} 486 487static unsigned long pd_timeout; 488 489static enum action do_pd_read_start(void) 490{ 491 if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) { 492 if (pd_retries < PD_MAX_RETRIES) { 493 pd_retries++; 494 return Wait; 495 } 496 return Fail; 497 } 498 pd_ide_command(pd_current, IDE_READ, pd_block, pd_run); 499 phase = do_pd_read_drq; 500 pd_timeout = jiffies + PD_TMO; 501 return Hold; 502} 503 504static enum action do_pd_write_start(void) 505{ 506 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) { 507 if (pd_retries < PD_MAX_RETRIES) { 508 pd_retries++; 509 return Wait; 510 } 511 return Fail; 512 } 513 pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run); 514 while (1) { 515 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) { 516 if (pd_retries < PD_MAX_RETRIES) { 517 pd_retries++; 518 return Wait; 519 } 520 return Fail; 521 } 522 pi_write_block(pd_current->pi, pd_buf, 512); 523 if (pd_next_buf()) 524 break; 525 } 526 phase = do_pd_write_done; 527 pd_timeout = jiffies + PD_TMO; 528 return Hold; 529} 530 531static inline int pd_ready(void) 532{ 533 return !(status_reg(pd_current) & STAT_BUSY); 534} 535 536static enum action do_pd_read_drq(void) 537{ 538 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout)) 539 return Hold; 540 541 while (1) { 542 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) { 543 if (pd_retries < PD_MAX_RETRIES) { 544 pd_retries++; 545 phase = do_pd_read_start; 546 return Wait; 547 } 548 return Fail; 549 } 550 pi_read_block(pd_current->pi, pd_buf, 512); 551 if (pd_next_buf()) 552 break; 553 } 554 return Ok; 555} 556 557static enum action do_pd_write_done(void) 558{ 559 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout)) 560 return Hold; 561 562 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) { 563 if (pd_retries < PD_MAX_RETRIES) { 564 pd_retries++; 565 phase = do_pd_write_start; 566 return Wait; 567 } 568 return Fail; 569 } 570 return Ok; 571} 572 573/* special io requests */ 574 575/* According to the ATA standard, the default CHS geometry should be 576 available following a reset. Some Western Digital drives come up 577 in a mode where only LBA addresses are accepted until the device 578 parameters are initialised. 579*/ 580 581static void pd_init_dev_parms(struct pd_unit *disk) 582{ 583 pd_wait_for(disk, 0, DBMSG("before init_dev_parms")); 584 pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0, 585 IDE_INIT_DEV_PARMS); 586 udelay(300); 587 pd_wait_for(disk, 0, "Initialise device parameters"); 588} 589 590static enum action pd_door_lock(struct pd_unit *disk) 591{ 592 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) { 593 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK); 594 pd_wait_for(disk, STAT_READY, "Lock done"); 595 } 596 return Ok; 597} 598 599static enum action pd_door_unlock(struct pd_unit *disk) 600{ 601 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) { 602 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK); 603 pd_wait_for(disk, STAT_READY, "Lock done"); 604 } 605 return Ok; 606} 607 608static enum action pd_eject(struct pd_unit *disk) 609{ 610 pd_wait_for(disk, 0, DBMSG("before unlock on eject")); 611 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK); 612 pd_wait_for(disk, 0, DBMSG("after unlock on eject")); 613 pd_wait_for(disk, 0, DBMSG("before eject")); 614 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT); 615 pd_wait_for(disk, 0, DBMSG("after eject")); 616 return Ok; 617} 618 619static enum action pd_media_check(struct pd_unit *disk) 620{ 621 int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check")); 622 if (!(r & STAT_ERR)) { 623 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY); 624 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY")); 625 } else 626 disk->changed = 1; /* say changed if other error */ 627 if (r & ERR_MC) { 628 disk->changed = 1; 629 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE); 630 pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE")); 631 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY); 632 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY")); 633 } 634 return Ok; 635} 636 637static void pd_standby_off(struct pd_unit *disk) 638{ 639 pd_wait_for(disk, 0, DBMSG("before STANDBY")); 640 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY); 641 pd_wait_for(disk, 0, DBMSG("after STANDBY")); 642} 643 644static enum action pd_identify(struct pd_unit *disk) 645{ 646 int j; 647 char id[PD_ID_LEN + 1]; 648 649/* WARNING: here there may be dragons. reset() applies to both drives, 650 but we call it only on probing the MASTER. This should allow most 651 common configurations to work, but be warned that a reset can clear 652 settings on the SLAVE drive. 653*/ 654 655 if (disk->drive == 0) 656 pd_reset(disk); 657 658 write_reg(disk, 6, DRIVE(disk)); 659 pd_wait_for(disk, 0, DBMSG("before IDENT")); 660 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY); 661 662 if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR) 663 return Fail; 664 pi_read_block(disk->pi, pd_scratch, 512); 665 disk->can_lba = pd_scratch[99] & 2; 666 disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12)); 667 disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6)); 668 disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2)); 669 if (disk->can_lba) 670 disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120)); 671 else 672 disk->capacity = disk->sectors * disk->heads * disk->cylinders; 673 674 for (j = 0; j < PD_ID_LEN; j++) 675 id[j ^ 1] = pd_scratch[j + PD_ID_OFF]; 676 j = PD_ID_LEN - 1; 677 while ((j >= 0) && (id[j] <= 0x20)) 678 j--; 679 j++; 680 id[j] = 0; 681 682 disk->removable = pd_scratch[0] & 0x80; 683 684 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n", 685 disk->name, id, 686 disk->drive ? "slave" : "master", 687 disk->capacity, disk->capacity / 2048, 688 disk->cylinders, disk->heads, disk->sectors, 689 disk->removable ? "removable" : "fixed"); 690 691 if (disk->capacity) 692 pd_init_dev_parms(disk); 693 if (!disk->standby) 694 pd_standby_off(disk); 695 696 return Ok; 697} 698 699/* end of io request engine */ 700 701static void do_pd_request(struct request_queue * q) 702{ 703 if (pd_req) 704 return; 705 pd_req = elv_next_request(q); 706 if (!pd_req) 707 return; 708 709 schedule_fsm(); 710} 711 712static int pd_special_command(struct pd_unit *disk, 713 enum action (*func)(struct pd_unit *disk)) 714{ 715 DECLARE_COMPLETION_ONSTACK(wait); 716 struct request rq; 717 int err = 0; 718 719 memset(&rq, 0, sizeof(rq)); 720 rq.errors = 0; 721 rq.rq_disk = disk->gd; 722 rq.ref_count = 1; 723 rq.end_io_data = &wait; 724 rq.end_io = blk_end_sync_rq; 725 blk_insert_request(disk->gd->queue, &rq, 0, func); 726 wait_for_completion(&wait); 727 if (rq.errors) 728 err = -EIO; 729 blk_put_request(&rq); 730 return err; 731} 732 733/* kernel glue structures */ 734 735static int pd_open(struct inode *inode, struct file *file) 736{ 737 struct pd_unit *disk = inode->i_bdev->bd_disk->private_data; 738 739 disk->access++; 740 741 if (disk->removable) { 742 pd_special_command(disk, pd_media_check); 743 pd_special_command(disk, pd_door_lock); 744 } 745 return 0; 746} 747 748static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo) 749{ 750 struct pd_unit *disk = bdev->bd_disk->private_data; 751 752 if (disk->alt_geom) { 753 geo->heads = PD_LOG_HEADS; 754 geo->sectors = PD_LOG_SECTS; 755 geo->cylinders = disk->capacity / (geo->heads * geo->sectors); 756 } else { 757 geo->heads = disk->heads; 758 geo->sectors = disk->sectors; 759 geo->cylinders = disk->cylinders; 760 } 761 762 return 0; 763} 764 765static int pd_ioctl(struct inode *inode, struct file *file, 766 unsigned int cmd, unsigned long arg) 767{ 768 struct pd_unit *disk = inode->i_bdev->bd_disk->private_data; 769 770 switch (cmd) { 771 case CDROMEJECT: 772 if (disk->access == 1) 773 pd_special_command(disk, pd_eject); 774 return 0; 775 default: 776 return -EINVAL; 777 } 778} 779 780static int pd_release(struct inode *inode, struct file *file) 781{ 782 struct pd_unit *disk = inode->i_bdev->bd_disk->private_data; 783 784 if (!--disk->access && disk->removable) 785 pd_special_command(disk, pd_door_unlock); 786 787 return 0; 788} 789 790static int pd_check_media(struct gendisk *p) 791{ 792 struct pd_unit *disk = p->private_data; 793 int r; 794 if (!disk->removable) 795 return 0; 796 pd_special_command(disk, pd_media_check); 797 r = disk->changed; 798 disk->changed = 0; 799 return r; 800} 801 802static int pd_revalidate(struct gendisk *p) 803{ 804 struct pd_unit *disk = p->private_data; 805 if (pd_special_command(disk, pd_identify) == 0) 806 set_capacity(p, disk->capacity); 807 else 808 set_capacity(p, 0); 809 return 0; 810} 811 812static struct block_device_operations pd_fops = { 813 .owner = THIS_MODULE, 814 .open = pd_open, 815 .release = pd_release, 816 .ioctl = pd_ioctl, 817 .getgeo = pd_getgeo, 818 .media_changed = pd_check_media, 819 .revalidate_disk= pd_revalidate 820}; 821 822/* probing */ 823 824static void pd_probe_drive(struct pd_unit *disk) 825{ 826 struct gendisk *p = alloc_disk(1 << PD_BITS); 827 if (!p) 828 return; 829 strcpy(p->disk_name, disk->name); 830 p->fops = &pd_fops; 831 p->major = major; 832 p->first_minor = (disk - pd) << PD_BITS; 833 disk->gd = p; 834 p->private_data = disk; 835 p->queue = pd_queue; 836 837 if (disk->drive == -1) { 838 for (disk->drive = 0; disk->drive <= 1; disk->drive++) 839 if (pd_special_command(disk, pd_identify) == 0) 840 return; 841 } else if (pd_special_command(disk, pd_identify) == 0) 842 return; 843 disk->gd = NULL; 844 put_disk(p); 845} 846 847static int pd_detect(void) 848{ 849 int found = 0, unit, pd_drive_count = 0; 850 struct pd_unit *disk; 851 852 for (unit = 0; unit < PD_UNITS; unit++) { 853 int *parm = *drives[unit]; 854 struct pd_unit *disk = pd + unit; 855 disk->pi = &disk->pia; 856 disk->access = 0; 857 disk->changed = 1; 858 disk->capacity = 0; 859 disk->drive = parm[D_SLV]; 860 snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit); 861 disk->alt_geom = parm[D_GEO]; 862 disk->standby = parm[D_SBY]; 863 if (parm[D_PRT]) 864 pd_drive_count++; 865 } 866 867 if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */ 868 disk = pd; 869 if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch, 870 PI_PD, verbose, disk->name)) { 871 pd_probe_drive(disk); 872 if (!disk->gd) 873 pi_release(disk->pi); 874 } 875 876 } else { 877 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { 878 int *parm = *drives[unit]; 879 if (!parm[D_PRT]) 880 continue; 881 if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD], 882 parm[D_UNI], parm[D_PRO], parm[D_DLY], 883 pd_scratch, PI_PD, verbose, disk->name)) { 884 pd_probe_drive(disk); 885 if (!disk->gd) 886 pi_release(disk->pi); 887 } 888 } 889 } 890 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { 891 if (disk->gd) { 892 set_capacity(disk->gd, disk->capacity); 893 add_disk(disk->gd); 894 found = 1; 895 } 896 } 897 if (!found) 898 printk("%s: no valid drive found\n", name); 899 return found; 900} 901 902static int __init pd_init(void) 903{ 904 if (disable) 905 goto out1; 906 907 pd_queue = blk_init_queue(do_pd_request, &pd_lock); 908 if (!pd_queue) 909 goto out1; 910 911 blk_queue_max_sectors(pd_queue, cluster); 912 913 if (register_blkdev(major, name)) 914 goto out2; 915 916 printk("%s: %s version %s, major %d, cluster %d, nice %d\n", 917 name, name, PD_VERSION, major, cluster, nice); 918 if (!pd_detect()) 919 goto out3; 920 921 return 0; 922 923out3: 924 unregister_blkdev(major, name); 925out2: 926 blk_cleanup_queue(pd_queue); 927out1: 928 return -ENODEV; 929} 930 931static void __exit pd_exit(void) 932{ 933 struct pd_unit *disk; 934 int unit; 935 unregister_blkdev(major, name); 936 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) { 937 struct gendisk *p = disk->gd; 938 if (p) { 939 disk->gd = NULL; 940 del_gendisk(p); 941 put_disk(p); 942 pi_release(disk->pi); 943 } 944 } 945 blk_cleanup_queue(pd_queue); 946} 947 948MODULE_LICENSE("GPL"); 949module_init(pd_init) 950module_exit(pd_exit)