tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/* linux/spi/ads7846.h */
2
3/* Touchscreen characteristics vary between boards and models. The
4 * platform_data for the device's "struct device" holds this information.
5 *
6 * It's OK if the min/max values are zero.
7 */
8enum ads7846_filter {
9 ADS7846_FILTER_OK,
10 ADS7846_FILTER_REPEAT,
11 ADS7846_FILTER_IGNORE,
12};
13
14struct ads7846_platform_data {
15 u16 model; /* 7843, 7845, 7846. */
16 u16 vref_delay_usecs; /* 0 for external vref; etc */
17 int keep_vref_on:1; /* set to keep vref on for differential
18 * measurements as well */
19
20 /* Settling time of the analog signals; a function of Vcc and the
21 * capacitance on the X/Y drivers. If set to non-zero, two samples
22 * are taken with settle_delay us apart, and the second one is used.
23 * ~150 uSec with 0.01uF caps.
24 */
25 u16 settle_delay_usecs;
26
27 /* If set to non-zero, after samples are taken this delay is applied
28 * and penirq is rechecked, to help avoid false events. This value
29 * is affected by the material used to build the touch layer.
30 */
31 u16 penirq_recheck_delay_usecs;
32
33 u16 x_plate_ohms;
34 u16 y_plate_ohms;
35
36 u16 x_min, x_max;
37 u16 y_min, y_max;
38 u16 pressure_min, pressure_max;
39
40 u16 debounce_max; /* max number of additional readings
41 * per sample */
42 u16 debounce_tol; /* tolerance used for filtering */
43 u16 debounce_rep; /* additional consecutive good readings
44 * required after the first two */
45 int (*get_pendown_state)(void);
46 int (*filter_init) (struct ads7846_platform_data *pdata,
47 void **filter_data);
48 int (*filter) (void *filter_data, int data_idx, int *val);
49 void (*filter_cleanup)(void *filter_data);
50};
51