Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v2.6.20-rc6 803 lines 23 kB view raw
1/* 2 * Dynamic DMA mapping support. 3 * 4 * This implementation is for IA-64 and EM64T platforms that do not support 5 * I/O TLBs (aka DMA address translation hardware). 6 * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com> 7 * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com> 8 * Copyright (C) 2000, 2003 Hewlett-Packard Co 9 * David Mosberger-Tang <davidm@hpl.hp.com> 10 * 11 * 03/05/07 davidm Switch from PCI-DMA to generic device DMA API. 12 * 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid 13 * unnecessary i-cache flushing. 14 * 04/07/.. ak Better overflow handling. Assorted fixes. 15 * 05/09/10 linville Add support for syncing ranges, support syncing for 16 * DMA_BIDIRECTIONAL mappings, miscellaneous cleanup. 17 */ 18 19#include <linux/cache.h> 20#include <linux/dma-mapping.h> 21#include <linux/mm.h> 22#include <linux/module.h> 23#include <linux/spinlock.h> 24#include <linux/string.h> 25#include <linux/types.h> 26#include <linux/ctype.h> 27 28#include <asm/io.h> 29#include <asm/dma.h> 30#include <asm/scatterlist.h> 31 32#include <linux/init.h> 33#include <linux/bootmem.h> 34 35#define OFFSET(val,align) ((unsigned long) \ 36 ( (val) & ( (align) - 1))) 37 38#define SG_ENT_VIRT_ADDRESS(sg) (page_address((sg)->page) + (sg)->offset) 39#define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG)) 40 41/* 42 * Maximum allowable number of contiguous slabs to map, 43 * must be a power of 2. What is the appropriate value ? 44 * The complexity of {map,unmap}_single is linearly dependent on this value. 45 */ 46#define IO_TLB_SEGSIZE 128 47 48/* 49 * log of the size of each IO TLB slab. The number of slabs is command line 50 * controllable. 51 */ 52#define IO_TLB_SHIFT 11 53 54#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) 55 56/* 57 * Minimum IO TLB size to bother booting with. Systems with mainly 58 * 64bit capable cards will only lightly use the swiotlb. If we can't 59 * allocate a contiguous 1MB, we're probably in trouble anyway. 60 */ 61#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) 62 63/* 64 * Enumeration for sync targets 65 */ 66enum dma_sync_target { 67 SYNC_FOR_CPU = 0, 68 SYNC_FOR_DEVICE = 1, 69}; 70 71int swiotlb_force; 72 73/* 74 * Used to do a quick range check in swiotlb_unmap_single and 75 * swiotlb_sync_single_*, to see if the memory was in fact allocated by this 76 * API. 77 */ 78static char *io_tlb_start, *io_tlb_end; 79 80/* 81 * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and 82 * io_tlb_end. This is command line adjustable via setup_io_tlb_npages. 83 */ 84static unsigned long io_tlb_nslabs; 85 86/* 87 * When the IOMMU overflows we return a fallback buffer. This sets the size. 88 */ 89static unsigned long io_tlb_overflow = 32*1024; 90 91void *io_tlb_overflow_buffer; 92 93/* 94 * This is a free list describing the number of free entries available from 95 * each index 96 */ 97static unsigned int *io_tlb_list; 98static unsigned int io_tlb_index; 99 100/* 101 * We need to save away the original address corresponding to a mapped entry 102 * for the sync operations. 103 */ 104static unsigned char **io_tlb_orig_addr; 105 106/* 107 * Protect the above data structures in the map and unmap calls 108 */ 109static DEFINE_SPINLOCK(io_tlb_lock); 110 111static int __init 112setup_io_tlb_npages(char *str) 113{ 114 if (isdigit(*str)) { 115 io_tlb_nslabs = simple_strtoul(str, &str, 0); 116 /* avoid tail segment of size < IO_TLB_SEGSIZE */ 117 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); 118 } 119 if (*str == ',') 120 ++str; 121 if (!strcmp(str, "force")) 122 swiotlb_force = 1; 123 return 1; 124} 125__setup("swiotlb=", setup_io_tlb_npages); 126/* make io_tlb_overflow tunable too? */ 127 128/* 129 * Statically reserve bounce buffer space and initialize bounce buffer data 130 * structures for the software IO TLB used to implement the DMA API. 131 */ 132void 133swiotlb_init_with_default_size (size_t default_size) 134{ 135 unsigned long i; 136 137 if (!io_tlb_nslabs) { 138 io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); 139 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); 140 } 141 142 /* 143 * Get IO TLB memory from the low pages 144 */ 145 io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs * (1 << IO_TLB_SHIFT)); 146 if (!io_tlb_start) 147 panic("Cannot allocate SWIOTLB buffer"); 148 io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); 149 150 /* 151 * Allocate and initialize the free list array. This array is used 152 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE 153 * between io_tlb_start and io_tlb_end. 154 */ 155 io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int)); 156 for (i = 0; i < io_tlb_nslabs; i++) 157 io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); 158 io_tlb_index = 0; 159 io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *)); 160 161 /* 162 * Get the overflow emergency buffer 163 */ 164 io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow); 165 printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n", 166 virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); 167} 168 169void 170swiotlb_init (void) 171{ 172 swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */ 173} 174 175/* 176 * Systems with larger DMA zones (those that don't support ISA) can 177 * initialize the swiotlb later using the slab allocator if needed. 178 * This should be just like above, but with some error catching. 179 */ 180int 181swiotlb_late_init_with_default_size (size_t default_size) 182{ 183 unsigned long i, req_nslabs = io_tlb_nslabs; 184 unsigned int order; 185 186 if (!io_tlb_nslabs) { 187 io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); 188 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); 189 } 190 191 /* 192 * Get IO TLB memory from the low pages 193 */ 194 order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT)); 195 io_tlb_nslabs = SLABS_PER_PAGE << order; 196 197 while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { 198 io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN, 199 order); 200 if (io_tlb_start) 201 break; 202 order--; 203 } 204 205 if (!io_tlb_start) 206 goto cleanup1; 207 208 if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) { 209 printk(KERN_WARNING "Warning: only able to allocate %ld MB " 210 "for software IO TLB\n", (PAGE_SIZE << order) >> 20); 211 io_tlb_nslabs = SLABS_PER_PAGE << order; 212 } 213 io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); 214 memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT)); 215 216 /* 217 * Allocate and initialize the free list array. This array is used 218 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE 219 * between io_tlb_start and io_tlb_end. 220 */ 221 io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL, 222 get_order(io_tlb_nslabs * sizeof(int))); 223 if (!io_tlb_list) 224 goto cleanup2; 225 226 for (i = 0; i < io_tlb_nslabs; i++) 227 io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); 228 io_tlb_index = 0; 229 230 io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL, 231 get_order(io_tlb_nslabs * sizeof(char *))); 232 if (!io_tlb_orig_addr) 233 goto cleanup3; 234 235 memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *)); 236 237 /* 238 * Get the overflow emergency buffer 239 */ 240 io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA, 241 get_order(io_tlb_overflow)); 242 if (!io_tlb_overflow_buffer) 243 goto cleanup4; 244 245 printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - " 246 "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20, 247 virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); 248 249 return 0; 250 251cleanup4: 252 free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs * 253 sizeof(char *))); 254 io_tlb_orig_addr = NULL; 255cleanup3: 256 free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs * 257 sizeof(int))); 258 io_tlb_list = NULL; 259 io_tlb_end = NULL; 260cleanup2: 261 free_pages((unsigned long)io_tlb_start, order); 262 io_tlb_start = NULL; 263cleanup1: 264 io_tlb_nslabs = req_nslabs; 265 return -ENOMEM; 266} 267 268static inline int 269address_needs_mapping(struct device *hwdev, dma_addr_t addr) 270{ 271 dma_addr_t mask = 0xffffffff; 272 /* If the device has a mask, use it, otherwise default to 32 bits */ 273 if (hwdev && hwdev->dma_mask) 274 mask = *hwdev->dma_mask; 275 return (addr & ~mask) != 0; 276} 277 278/* 279 * Allocates bounce buffer and returns its kernel virtual address. 280 */ 281static void * 282map_single(struct device *hwdev, char *buffer, size_t size, int dir) 283{ 284 unsigned long flags; 285 char *dma_addr; 286 unsigned int nslots, stride, index, wrap; 287 int i; 288 289 /* 290 * For mappings greater than a page, we limit the stride (and 291 * hence alignment) to a page size. 292 */ 293 nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; 294 if (size > PAGE_SIZE) 295 stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT)); 296 else 297 stride = 1; 298 299 BUG_ON(!nslots); 300 301 /* 302 * Find suitable number of IO TLB entries size that will fit this 303 * request and allocate a buffer from that IO TLB pool. 304 */ 305 spin_lock_irqsave(&io_tlb_lock, flags); 306 { 307 wrap = index = ALIGN(io_tlb_index, stride); 308 309 if (index >= io_tlb_nslabs) 310 wrap = index = 0; 311 312 do { 313 /* 314 * If we find a slot that indicates we have 'nslots' 315 * number of contiguous buffers, we allocate the 316 * buffers from that slot and mark the entries as '0' 317 * indicating unavailable. 318 */ 319 if (io_tlb_list[index] >= nslots) { 320 int count = 0; 321 322 for (i = index; i < (int) (index + nslots); i++) 323 io_tlb_list[i] = 0; 324 for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--) 325 io_tlb_list[i] = ++count; 326 dma_addr = io_tlb_start + (index << IO_TLB_SHIFT); 327 328 /* 329 * Update the indices to avoid searching in 330 * the next round. 331 */ 332 io_tlb_index = ((index + nslots) < io_tlb_nslabs 333 ? (index + nslots) : 0); 334 335 goto found; 336 } 337 index += stride; 338 if (index >= io_tlb_nslabs) 339 index = 0; 340 } while (index != wrap); 341 342 spin_unlock_irqrestore(&io_tlb_lock, flags); 343 return NULL; 344 } 345 found: 346 spin_unlock_irqrestore(&io_tlb_lock, flags); 347 348 /* 349 * Save away the mapping from the original address to the DMA address. 350 * This is needed when we sync the memory. Then we sync the buffer if 351 * needed. 352 */ 353 io_tlb_orig_addr[index] = buffer; 354 if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) 355 memcpy(dma_addr, buffer, size); 356 357 return dma_addr; 358} 359 360/* 361 * dma_addr is the kernel virtual address of the bounce buffer to unmap. 362 */ 363static void 364unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir) 365{ 366 unsigned long flags; 367 int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; 368 int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; 369 char *buffer = io_tlb_orig_addr[index]; 370 371 /* 372 * First, sync the memory before unmapping the entry 373 */ 374 if (buffer && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL))) 375 /* 376 * bounce... copy the data back into the original buffer * and 377 * delete the bounce buffer. 378 */ 379 memcpy(buffer, dma_addr, size); 380 381 /* 382 * Return the buffer to the free list by setting the corresponding 383 * entries to indicate the number of contigous entries available. 384 * While returning the entries to the free list, we merge the entries 385 * with slots below and above the pool being returned. 386 */ 387 spin_lock_irqsave(&io_tlb_lock, flags); 388 { 389 count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ? 390 io_tlb_list[index + nslots] : 0); 391 /* 392 * Step 1: return the slots to the free list, merging the 393 * slots with superceeding slots 394 */ 395 for (i = index + nslots - 1; i >= index; i--) 396 io_tlb_list[i] = ++count; 397 /* 398 * Step 2: merge the returned slots with the preceding slots, 399 * if available (non zero) 400 */ 401 for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--) 402 io_tlb_list[i] = ++count; 403 } 404 spin_unlock_irqrestore(&io_tlb_lock, flags); 405} 406 407static void 408sync_single(struct device *hwdev, char *dma_addr, size_t size, 409 int dir, int target) 410{ 411 int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; 412 char *buffer = io_tlb_orig_addr[index]; 413 414 switch (target) { 415 case SYNC_FOR_CPU: 416 if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)) 417 memcpy(buffer, dma_addr, size); 418 else 419 BUG_ON(dir != DMA_TO_DEVICE); 420 break; 421 case SYNC_FOR_DEVICE: 422 if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) 423 memcpy(dma_addr, buffer, size); 424 else 425 BUG_ON(dir != DMA_FROM_DEVICE); 426 break; 427 default: 428 BUG(); 429 } 430} 431 432void * 433swiotlb_alloc_coherent(struct device *hwdev, size_t size, 434 dma_addr_t *dma_handle, gfp_t flags) 435{ 436 unsigned long dev_addr; 437 void *ret; 438 int order = get_order(size); 439 440 /* 441 * XXX fix me: the DMA API should pass us an explicit DMA mask 442 * instead, or use ZONE_DMA32 (ia64 overloads ZONE_DMA to be a ~32 443 * bit range instead of a 16MB one). 444 */ 445 flags |= GFP_DMA; 446 447 ret = (void *)__get_free_pages(flags, order); 448 if (ret && address_needs_mapping(hwdev, virt_to_phys(ret))) { 449 /* 450 * The allocated memory isn't reachable by the device. 451 * Fall back on swiotlb_map_single(). 452 */ 453 free_pages((unsigned long) ret, order); 454 ret = NULL; 455 } 456 if (!ret) { 457 /* 458 * We are either out of memory or the device can't DMA 459 * to GFP_DMA memory; fall back on 460 * swiotlb_map_single(), which will grab memory from 461 * the lowest available address range. 462 */ 463 dma_addr_t handle; 464 handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE); 465 if (swiotlb_dma_mapping_error(handle)) 466 return NULL; 467 468 ret = phys_to_virt(handle); 469 } 470 471 memset(ret, 0, size); 472 dev_addr = virt_to_phys(ret); 473 474 /* Confirm address can be DMA'd by device */ 475 if (address_needs_mapping(hwdev, dev_addr)) { 476 printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016lx\n", 477 (unsigned long long)*hwdev->dma_mask, dev_addr); 478 panic("swiotlb_alloc_coherent: allocated memory is out of " 479 "range for device"); 480 } 481 *dma_handle = dev_addr; 482 return ret; 483} 484 485void 486swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr, 487 dma_addr_t dma_handle) 488{ 489 if (!(vaddr >= (void *)io_tlb_start 490 && vaddr < (void *)io_tlb_end)) 491 free_pages((unsigned long) vaddr, get_order(size)); 492 else 493 /* DMA_TO_DEVICE to avoid memcpy in unmap_single */ 494 swiotlb_unmap_single (hwdev, dma_handle, size, DMA_TO_DEVICE); 495} 496 497static void 498swiotlb_full(struct device *dev, size_t size, int dir, int do_panic) 499{ 500 /* 501 * Ran out of IOMMU space for this operation. This is very bad. 502 * Unfortunately the drivers cannot handle this operation properly. 503 * unless they check for dma_mapping_error (most don't) 504 * When the mapping is small enough return a static buffer to limit 505 * the damage, or panic when the transfer is too big. 506 */ 507 printk(KERN_ERR "DMA: Out of SW-IOMMU space for %lu bytes at " 508 "device %s\n", size, dev ? dev->bus_id : "?"); 509 510 if (size > io_tlb_overflow && do_panic) { 511 if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) 512 panic("DMA: Memory would be corrupted\n"); 513 if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) 514 panic("DMA: Random memory would be DMAed\n"); 515 } 516} 517 518/* 519 * Map a single buffer of the indicated size for DMA in streaming mode. The 520 * physical address to use is returned. 521 * 522 * Once the device is given the dma address, the device owns this memory until 523 * either swiotlb_unmap_single or swiotlb_dma_sync_single is performed. 524 */ 525dma_addr_t 526swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir) 527{ 528 unsigned long dev_addr = virt_to_phys(ptr); 529 void *map; 530 531 BUG_ON(dir == DMA_NONE); 532 /* 533 * If the pointer passed in happens to be in the device's DMA window, 534 * we can safely return the device addr and not worry about bounce 535 * buffering it. 536 */ 537 if (!address_needs_mapping(hwdev, dev_addr) && !swiotlb_force) 538 return dev_addr; 539 540 /* 541 * Oh well, have to allocate and map a bounce buffer. 542 */ 543 map = map_single(hwdev, ptr, size, dir); 544 if (!map) { 545 swiotlb_full(hwdev, size, dir, 1); 546 map = io_tlb_overflow_buffer; 547 } 548 549 dev_addr = virt_to_phys(map); 550 551 /* 552 * Ensure that the address returned is DMA'ble 553 */ 554 if (address_needs_mapping(hwdev, dev_addr)) 555 panic("map_single: bounce buffer is not DMA'ble"); 556 557 return dev_addr; 558} 559 560/* 561 * Since DMA is i-cache coherent, any (complete) pages that were written via 562 * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to 563 * flush them when they get mapped into an executable vm-area. 564 */ 565static void 566mark_clean(void *addr, size_t size) 567{ 568 unsigned long pg_addr, end; 569 570 pg_addr = PAGE_ALIGN((unsigned long) addr); 571 end = (unsigned long) addr + size; 572 while (pg_addr + PAGE_SIZE <= end) { 573 struct page *page = virt_to_page(pg_addr); 574 set_bit(PG_arch_1, &page->flags); 575 pg_addr += PAGE_SIZE; 576 } 577} 578 579/* 580 * Unmap a single streaming mode DMA translation. The dma_addr and size must 581 * match what was provided for in a previous swiotlb_map_single call. All 582 * other usages are undefined. 583 * 584 * After this call, reads by the cpu to the buffer are guaranteed to see 585 * whatever the device wrote there. 586 */ 587void 588swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size, 589 int dir) 590{ 591 char *dma_addr = phys_to_virt(dev_addr); 592 593 BUG_ON(dir == DMA_NONE); 594 if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) 595 unmap_single(hwdev, dma_addr, size, dir); 596 else if (dir == DMA_FROM_DEVICE) 597 mark_clean(dma_addr, size); 598} 599 600/* 601 * Make physical memory consistent for a single streaming mode DMA translation 602 * after a transfer. 603 * 604 * If you perform a swiotlb_map_single() but wish to interrogate the buffer 605 * using the cpu, yet do not wish to teardown the dma mapping, you must 606 * call this function before doing so. At the next point you give the dma 607 * address back to the card, you must first perform a 608 * swiotlb_dma_sync_for_device, and then the device again owns the buffer 609 */ 610static inline void 611swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr, 612 size_t size, int dir, int target) 613{ 614 char *dma_addr = phys_to_virt(dev_addr); 615 616 BUG_ON(dir == DMA_NONE); 617 if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) 618 sync_single(hwdev, dma_addr, size, dir, target); 619 else if (dir == DMA_FROM_DEVICE) 620 mark_clean(dma_addr, size); 621} 622 623void 624swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr, 625 size_t size, int dir) 626{ 627 swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_CPU); 628} 629 630void 631swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr, 632 size_t size, int dir) 633{ 634 swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_DEVICE); 635} 636 637/* 638 * Same as above, but for a sub-range of the mapping. 639 */ 640static inline void 641swiotlb_sync_single_range(struct device *hwdev, dma_addr_t dev_addr, 642 unsigned long offset, size_t size, 643 int dir, int target) 644{ 645 char *dma_addr = phys_to_virt(dev_addr) + offset; 646 647 BUG_ON(dir == DMA_NONE); 648 if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) 649 sync_single(hwdev, dma_addr, size, dir, target); 650 else if (dir == DMA_FROM_DEVICE) 651 mark_clean(dma_addr, size); 652} 653 654void 655swiotlb_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dev_addr, 656 unsigned long offset, size_t size, int dir) 657{ 658 swiotlb_sync_single_range(hwdev, dev_addr, offset, size, dir, 659 SYNC_FOR_CPU); 660} 661 662void 663swiotlb_sync_single_range_for_device(struct device *hwdev, dma_addr_t dev_addr, 664 unsigned long offset, size_t size, int dir) 665{ 666 swiotlb_sync_single_range(hwdev, dev_addr, offset, size, dir, 667 SYNC_FOR_DEVICE); 668} 669 670/* 671 * Map a set of buffers described by scatterlist in streaming mode for DMA. 672 * This is the scatter-gather version of the above swiotlb_map_single 673 * interface. Here the scatter gather list elements are each tagged with the 674 * appropriate dma address and length. They are obtained via 675 * sg_dma_{address,length}(SG). 676 * 677 * NOTE: An implementation may be able to use a smaller number of 678 * DMA address/length pairs than there are SG table elements. 679 * (for example via virtual mapping capabilities) 680 * The routine returns the number of addr/length pairs actually 681 * used, at most nents. 682 * 683 * Device ownership issues as mentioned above for swiotlb_map_single are the 684 * same here. 685 */ 686int 687swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nelems, 688 int dir) 689{ 690 void *addr; 691 unsigned long dev_addr; 692 int i; 693 694 BUG_ON(dir == DMA_NONE); 695 696 for (i = 0; i < nelems; i++, sg++) { 697 addr = SG_ENT_VIRT_ADDRESS(sg); 698 dev_addr = virt_to_phys(addr); 699 if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) { 700 void *map = map_single(hwdev, addr, sg->length, dir); 701 sg->dma_address = virt_to_bus(map); 702 if (!map) { 703 /* Don't panic here, we expect map_sg users 704 to do proper error handling. */ 705 swiotlb_full(hwdev, sg->length, dir, 0); 706 swiotlb_unmap_sg(hwdev, sg - i, i, dir); 707 sg[0].dma_length = 0; 708 return 0; 709 } 710 } else 711 sg->dma_address = dev_addr; 712 sg->dma_length = sg->length; 713 } 714 return nelems; 715} 716 717/* 718 * Unmap a set of streaming mode DMA translations. Again, cpu read rules 719 * concerning calls here are the same as for swiotlb_unmap_single() above. 720 */ 721void 722swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nelems, 723 int dir) 724{ 725 int i; 726 727 BUG_ON(dir == DMA_NONE); 728 729 for (i = 0; i < nelems; i++, sg++) 730 if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) 731 unmap_single(hwdev, (void *) phys_to_virt(sg->dma_address), sg->dma_length, dir); 732 else if (dir == DMA_FROM_DEVICE) 733 mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length); 734} 735 736/* 737 * Make physical memory consistent for a set of streaming mode DMA translations 738 * after a transfer. 739 * 740 * The same as swiotlb_sync_single_* but for a scatter-gather list, same rules 741 * and usage. 742 */ 743static inline void 744swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sg, 745 int nelems, int dir, int target) 746{ 747 int i; 748 749 BUG_ON(dir == DMA_NONE); 750 751 for (i = 0; i < nelems; i++, sg++) 752 if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) 753 sync_single(hwdev, (void *) sg->dma_address, 754 sg->dma_length, dir, target); 755} 756 757void 758swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg, 759 int nelems, int dir) 760{ 761 swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_CPU); 762} 763 764void 765swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg, 766 int nelems, int dir) 767{ 768 swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_DEVICE); 769} 770 771int 772swiotlb_dma_mapping_error(dma_addr_t dma_addr) 773{ 774 return (dma_addr == virt_to_phys(io_tlb_overflow_buffer)); 775} 776 777/* 778 * Return whether the given device DMA address mask can be supported 779 * properly. For example, if your device can only drive the low 24-bits 780 * during bus mastering, then you would pass 0x00ffffff as the mask to 781 * this function. 782 */ 783int 784swiotlb_dma_supported (struct device *hwdev, u64 mask) 785{ 786 return (virt_to_phys (io_tlb_end) - 1) <= mask; 787} 788 789EXPORT_SYMBOL(swiotlb_init); 790EXPORT_SYMBOL(swiotlb_map_single); 791EXPORT_SYMBOL(swiotlb_unmap_single); 792EXPORT_SYMBOL(swiotlb_map_sg); 793EXPORT_SYMBOL(swiotlb_unmap_sg); 794EXPORT_SYMBOL(swiotlb_sync_single_for_cpu); 795EXPORT_SYMBOL(swiotlb_sync_single_for_device); 796EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_cpu); 797EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_device); 798EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu); 799EXPORT_SYMBOL(swiotlb_sync_sg_for_device); 800EXPORT_SYMBOL(swiotlb_dma_mapping_error); 801EXPORT_SYMBOL(swiotlb_alloc_coherent); 802EXPORT_SYMBOL(swiotlb_free_coherent); 803EXPORT_SYMBOL(swiotlb_dma_supported);