Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
1
fork

Configure Feed

Select the types of activity you want to include in your feed.

at v2.6.19 2893 lines 85 kB view raw
1/******************************************************************************* 2 3 Intel PRO/100 Linux driver 4 Copyright(c) 1999 - 2006 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 19 The full GNU General Public License is included in this distribution in 20 the file called "COPYING". 21 22 Contact Information: 23 Linux NICS <linux.nics@intel.com> 24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 26 27*******************************************************************************/ 28 29/* 30 * e100.c: Intel(R) PRO/100 ethernet driver 31 * 32 * (Re)written 2003 by scott.feldman@intel.com. Based loosely on 33 * original e100 driver, but better described as a munging of 34 * e100, e1000, eepro100, tg3, 8139cp, and other drivers. 35 * 36 * References: 37 * Intel 8255x 10/100 Mbps Ethernet Controller Family, 38 * Open Source Software Developers Manual, 39 * http://sourceforge.net/projects/e1000 40 * 41 * 42 * Theory of Operation 43 * 44 * I. General 45 * 46 * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet 47 * controller family, which includes the 82557, 82558, 82559, 82550, 48 * 82551, and 82562 devices. 82558 and greater controllers 49 * integrate the Intel 82555 PHY. The controllers are used in 50 * server and client network interface cards, as well as in 51 * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx 52 * configurations. 8255x supports a 32-bit linear addressing 53 * mode and operates at 33Mhz PCI clock rate. 54 * 55 * II. Driver Operation 56 * 57 * Memory-mapped mode is used exclusively to access the device's 58 * shared-memory structure, the Control/Status Registers (CSR). All 59 * setup, configuration, and control of the device, including queuing 60 * of Tx, Rx, and configuration commands is through the CSR. 61 * cmd_lock serializes accesses to the CSR command register. cb_lock 62 * protects the shared Command Block List (CBL). 63 * 64 * 8255x is highly MII-compliant and all access to the PHY go 65 * through the Management Data Interface (MDI). Consequently, the 66 * driver leverages the mii.c library shared with other MII-compliant 67 * devices. 68 * 69 * Big- and Little-Endian byte order as well as 32- and 64-bit 70 * archs are supported. Weak-ordered memory and non-cache-coherent 71 * archs are supported. 72 * 73 * III. Transmit 74 * 75 * A Tx skb is mapped and hangs off of a TCB. TCBs are linked 76 * together in a fixed-size ring (CBL) thus forming the flexible mode 77 * memory structure. A TCB marked with the suspend-bit indicates 78 * the end of the ring. The last TCB processed suspends the 79 * controller, and the controller can be restarted by issue a CU 80 * resume command to continue from the suspend point, or a CU start 81 * command to start at a given position in the ring. 82 * 83 * Non-Tx commands (config, multicast setup, etc) are linked 84 * into the CBL ring along with Tx commands. The common structure 85 * used for both Tx and non-Tx commands is the Command Block (CB). 86 * 87 * cb_to_use is the next CB to use for queuing a command; cb_to_clean 88 * is the next CB to check for completion; cb_to_send is the first 89 * CB to start on in case of a previous failure to resume. CB clean 90 * up happens in interrupt context in response to a CU interrupt. 91 * cbs_avail keeps track of number of free CB resources available. 92 * 93 * Hardware padding of short packets to minimum packet size is 94 * enabled. 82557 pads with 7Eh, while the later controllers pad 95 * with 00h. 96 * 97 * IV. Recieve 98 * 99 * The Receive Frame Area (RFA) comprises a ring of Receive Frame 100 * Descriptors (RFD) + data buffer, thus forming the simplified mode 101 * memory structure. Rx skbs are allocated to contain both the RFD 102 * and the data buffer, but the RFD is pulled off before the skb is 103 * indicated. The data buffer is aligned such that encapsulated 104 * protocol headers are u32-aligned. Since the RFD is part of the 105 * mapped shared memory, and completion status is contained within 106 * the RFD, the RFD must be dma_sync'ed to maintain a consistent 107 * view from software and hardware. 108 * 109 * Under typical operation, the receive unit (RU) is start once, 110 * and the controller happily fills RFDs as frames arrive. If 111 * replacement RFDs cannot be allocated, or the RU goes non-active, 112 * the RU must be restarted. Frame arrival generates an interrupt, 113 * and Rx indication and re-allocation happen in the same context, 114 * therefore no locking is required. A software-generated interrupt 115 * is generated from the watchdog to recover from a failed allocation 116 * senario where all Rx resources have been indicated and none re- 117 * placed. 118 * 119 * V. Miscellaneous 120 * 121 * VLAN offloading of tagging, stripping and filtering is not 122 * supported, but driver will accommodate the extra 4-byte VLAN tag 123 * for processing by upper layers. Tx/Rx Checksum offloading is not 124 * supported. Tx Scatter/Gather is not supported. Jumbo Frames is 125 * not supported (hardware limitation). 126 * 127 * MagicPacket(tm) WoL support is enabled/disabled via ethtool. 128 * 129 * Thanks to JC (jchapman@katalix.com) for helping with 130 * testing/troubleshooting the development driver. 131 * 132 * TODO: 133 * o several entry points race with dev->close 134 * o check for tx-no-resources/stop Q races with tx clean/wake Q 135 * 136 * FIXES: 137 * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com> 138 * - Stratus87247: protect MDI control register manipulations 139 */ 140 141#include <linux/module.h> 142#include <linux/moduleparam.h> 143#include <linux/kernel.h> 144#include <linux/types.h> 145#include <linux/slab.h> 146#include <linux/delay.h> 147#include <linux/init.h> 148#include <linux/pci.h> 149#include <linux/dma-mapping.h> 150#include <linux/netdevice.h> 151#include <linux/etherdevice.h> 152#include <linux/mii.h> 153#include <linux/if_vlan.h> 154#include <linux/skbuff.h> 155#include <linux/ethtool.h> 156#include <linux/string.h> 157#include <asm/unaligned.h> 158 159 160#define DRV_NAME "e100" 161#define DRV_EXT "-NAPI" 162#define DRV_VERSION "3.5.17-k2"DRV_EXT 163#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" 164#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" 165#define PFX DRV_NAME ": " 166 167#define E100_WATCHDOG_PERIOD (2 * HZ) 168#define E100_NAPI_WEIGHT 16 169 170MODULE_DESCRIPTION(DRV_DESCRIPTION); 171MODULE_AUTHOR(DRV_COPYRIGHT); 172MODULE_LICENSE("GPL"); 173MODULE_VERSION(DRV_VERSION); 174 175static int debug = 3; 176static int eeprom_bad_csum_allow = 0; 177module_param(debug, int, 0); 178module_param(eeprom_bad_csum_allow, int, 0); 179MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); 180MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums"); 181#define DPRINTK(nlevel, klevel, fmt, args...) \ 182 (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \ 183 printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \ 184 __FUNCTION__ , ## args)) 185 186#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\ 187 PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \ 188 PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich } 189static struct pci_device_id e100_id_table[] = { 190 INTEL_8255X_ETHERNET_DEVICE(0x1029, 0), 191 INTEL_8255X_ETHERNET_DEVICE(0x1030, 0), 192 INTEL_8255X_ETHERNET_DEVICE(0x1031, 3), 193 INTEL_8255X_ETHERNET_DEVICE(0x1032, 3), 194 INTEL_8255X_ETHERNET_DEVICE(0x1033, 3), 195 INTEL_8255X_ETHERNET_DEVICE(0x1034, 3), 196 INTEL_8255X_ETHERNET_DEVICE(0x1038, 3), 197 INTEL_8255X_ETHERNET_DEVICE(0x1039, 4), 198 INTEL_8255X_ETHERNET_DEVICE(0x103A, 4), 199 INTEL_8255X_ETHERNET_DEVICE(0x103B, 4), 200 INTEL_8255X_ETHERNET_DEVICE(0x103C, 4), 201 INTEL_8255X_ETHERNET_DEVICE(0x103D, 4), 202 INTEL_8255X_ETHERNET_DEVICE(0x103E, 4), 203 INTEL_8255X_ETHERNET_DEVICE(0x1050, 5), 204 INTEL_8255X_ETHERNET_DEVICE(0x1051, 5), 205 INTEL_8255X_ETHERNET_DEVICE(0x1052, 5), 206 INTEL_8255X_ETHERNET_DEVICE(0x1053, 5), 207 INTEL_8255X_ETHERNET_DEVICE(0x1054, 5), 208 INTEL_8255X_ETHERNET_DEVICE(0x1055, 5), 209 INTEL_8255X_ETHERNET_DEVICE(0x1056, 5), 210 INTEL_8255X_ETHERNET_DEVICE(0x1057, 5), 211 INTEL_8255X_ETHERNET_DEVICE(0x1059, 0), 212 INTEL_8255X_ETHERNET_DEVICE(0x1064, 6), 213 INTEL_8255X_ETHERNET_DEVICE(0x1065, 6), 214 INTEL_8255X_ETHERNET_DEVICE(0x1066, 6), 215 INTEL_8255X_ETHERNET_DEVICE(0x1067, 6), 216 INTEL_8255X_ETHERNET_DEVICE(0x1068, 6), 217 INTEL_8255X_ETHERNET_DEVICE(0x1069, 6), 218 INTEL_8255X_ETHERNET_DEVICE(0x106A, 6), 219 INTEL_8255X_ETHERNET_DEVICE(0x106B, 6), 220 INTEL_8255X_ETHERNET_DEVICE(0x1091, 7), 221 INTEL_8255X_ETHERNET_DEVICE(0x1092, 7), 222 INTEL_8255X_ETHERNET_DEVICE(0x1093, 7), 223 INTEL_8255X_ETHERNET_DEVICE(0x1094, 7), 224 INTEL_8255X_ETHERNET_DEVICE(0x1095, 7), 225 INTEL_8255X_ETHERNET_DEVICE(0x1209, 0), 226 INTEL_8255X_ETHERNET_DEVICE(0x1229, 0), 227 INTEL_8255X_ETHERNET_DEVICE(0x2449, 2), 228 INTEL_8255X_ETHERNET_DEVICE(0x2459, 2), 229 INTEL_8255X_ETHERNET_DEVICE(0x245D, 2), 230 INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7), 231 { 0, } 232}; 233MODULE_DEVICE_TABLE(pci, e100_id_table); 234 235enum mac { 236 mac_82557_D100_A = 0, 237 mac_82557_D100_B = 1, 238 mac_82557_D100_C = 2, 239 mac_82558_D101_A4 = 4, 240 mac_82558_D101_B0 = 5, 241 mac_82559_D101M = 8, 242 mac_82559_D101S = 9, 243 mac_82550_D102 = 12, 244 mac_82550_D102_C = 13, 245 mac_82551_E = 14, 246 mac_82551_F = 15, 247 mac_82551_10 = 16, 248 mac_unknown = 0xFF, 249}; 250 251enum phy { 252 phy_100a = 0x000003E0, 253 phy_100c = 0x035002A8, 254 phy_82555_tx = 0x015002A8, 255 phy_nsc_tx = 0x5C002000, 256 phy_82562_et = 0x033002A8, 257 phy_82562_em = 0x032002A8, 258 phy_82562_ek = 0x031002A8, 259 phy_82562_eh = 0x017002A8, 260 phy_unknown = 0xFFFFFFFF, 261}; 262 263/* CSR (Control/Status Registers) */ 264struct csr { 265 struct { 266 u8 status; 267 u8 stat_ack; 268 u8 cmd_lo; 269 u8 cmd_hi; 270 u32 gen_ptr; 271 } scb; 272 u32 port; 273 u16 flash_ctrl; 274 u8 eeprom_ctrl_lo; 275 u8 eeprom_ctrl_hi; 276 u32 mdi_ctrl; 277 u32 rx_dma_count; 278}; 279 280enum scb_status { 281 rus_ready = 0x10, 282 rus_mask = 0x3C, 283}; 284 285enum ru_state { 286 RU_SUSPENDED = 0, 287 RU_RUNNING = 1, 288 RU_UNINITIALIZED = -1, 289}; 290 291enum scb_stat_ack { 292 stat_ack_not_ours = 0x00, 293 stat_ack_sw_gen = 0x04, 294 stat_ack_rnr = 0x10, 295 stat_ack_cu_idle = 0x20, 296 stat_ack_frame_rx = 0x40, 297 stat_ack_cu_cmd_done = 0x80, 298 stat_ack_not_present = 0xFF, 299 stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx), 300 stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done), 301}; 302 303enum scb_cmd_hi { 304 irq_mask_none = 0x00, 305 irq_mask_all = 0x01, 306 irq_sw_gen = 0x02, 307}; 308 309enum scb_cmd_lo { 310 cuc_nop = 0x00, 311 ruc_start = 0x01, 312 ruc_load_base = 0x06, 313 cuc_start = 0x10, 314 cuc_resume = 0x20, 315 cuc_dump_addr = 0x40, 316 cuc_dump_stats = 0x50, 317 cuc_load_base = 0x60, 318 cuc_dump_reset = 0x70, 319}; 320 321enum cuc_dump { 322 cuc_dump_complete = 0x0000A005, 323 cuc_dump_reset_complete = 0x0000A007, 324}; 325 326enum port { 327 software_reset = 0x0000, 328 selftest = 0x0001, 329 selective_reset = 0x0002, 330}; 331 332enum eeprom_ctrl_lo { 333 eesk = 0x01, 334 eecs = 0x02, 335 eedi = 0x04, 336 eedo = 0x08, 337}; 338 339enum mdi_ctrl { 340 mdi_write = 0x04000000, 341 mdi_read = 0x08000000, 342 mdi_ready = 0x10000000, 343}; 344 345enum eeprom_op { 346 op_write = 0x05, 347 op_read = 0x06, 348 op_ewds = 0x10, 349 op_ewen = 0x13, 350}; 351 352enum eeprom_offsets { 353 eeprom_cnfg_mdix = 0x03, 354 eeprom_id = 0x0A, 355 eeprom_config_asf = 0x0D, 356 eeprom_smbus_addr = 0x90, 357}; 358 359enum eeprom_cnfg_mdix { 360 eeprom_mdix_enabled = 0x0080, 361}; 362 363enum eeprom_id { 364 eeprom_id_wol = 0x0020, 365}; 366 367enum eeprom_config_asf { 368 eeprom_asf = 0x8000, 369 eeprom_gcl = 0x4000, 370}; 371 372enum cb_status { 373 cb_complete = 0x8000, 374 cb_ok = 0x2000, 375}; 376 377enum cb_command { 378 cb_nop = 0x0000, 379 cb_iaaddr = 0x0001, 380 cb_config = 0x0002, 381 cb_multi = 0x0003, 382 cb_tx = 0x0004, 383 cb_ucode = 0x0005, 384 cb_dump = 0x0006, 385 cb_tx_sf = 0x0008, 386 cb_cid = 0x1f00, 387 cb_i = 0x2000, 388 cb_s = 0x4000, 389 cb_el = 0x8000, 390}; 391 392struct rfd { 393 u16 status; 394 u16 command; 395 u32 link; 396 u32 rbd; 397 u16 actual_size; 398 u16 size; 399}; 400 401struct rx { 402 struct rx *next, *prev; 403 struct sk_buff *skb; 404 dma_addr_t dma_addr; 405}; 406 407#if defined(__BIG_ENDIAN_BITFIELD) 408#define X(a,b) b,a 409#else 410#define X(a,b) a,b 411#endif 412struct config { 413/*0*/ u8 X(byte_count:6, pad0:2); 414/*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1); 415/*2*/ u8 adaptive_ifs; 416/*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1), 417 term_write_cache_line:1), pad3:4); 418/*4*/ u8 X(rx_dma_max_count:7, pad4:1); 419/*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1); 420/*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1), 421 tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1), 422 rx_discard_overruns:1), rx_save_bad_frames:1); 423/*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2), 424 pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1), 425 tx_dynamic_tbd:1); 426/*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1); 427/*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1), 428 link_status_wake:1), arp_wake:1), mcmatch_wake:1); 429/*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2), 430 loopback:2); 431/*11*/ u8 X(linear_priority:3, pad11:5); 432/*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4); 433/*13*/ u8 ip_addr_lo; 434/*14*/ u8 ip_addr_hi; 435/*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1), 436 wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1), 437 pad15_2:1), crs_or_cdt:1); 438/*16*/ u8 fc_delay_lo; 439/*17*/ u8 fc_delay_hi; 440/*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1), 441 rx_long_ok:1), fc_priority_threshold:3), pad18:1); 442/*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1), 443 fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1), 444 full_duplex_force:1), full_duplex_pin:1); 445/*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1); 446/*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4); 447/*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6); 448 u8 pad_d102[9]; 449}; 450 451#define E100_MAX_MULTICAST_ADDRS 64 452struct multi { 453 u16 count; 454 u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/]; 455}; 456 457/* Important: keep total struct u32-aligned */ 458#define UCODE_SIZE 134 459struct cb { 460 u16 status; 461 u16 command; 462 u32 link; 463 union { 464 u8 iaaddr[ETH_ALEN]; 465 u32 ucode[UCODE_SIZE]; 466 struct config config; 467 struct multi multi; 468 struct { 469 u32 tbd_array; 470 u16 tcb_byte_count; 471 u8 threshold; 472 u8 tbd_count; 473 struct { 474 u32 buf_addr; 475 u16 size; 476 u16 eol; 477 } tbd; 478 } tcb; 479 u32 dump_buffer_addr; 480 } u; 481 struct cb *next, *prev; 482 dma_addr_t dma_addr; 483 struct sk_buff *skb; 484}; 485 486enum loopback { 487 lb_none = 0, lb_mac = 1, lb_phy = 3, 488}; 489 490struct stats { 491 u32 tx_good_frames, tx_max_collisions, tx_late_collisions, 492 tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions, 493 tx_multiple_collisions, tx_total_collisions; 494 u32 rx_good_frames, rx_crc_errors, rx_alignment_errors, 495 rx_resource_errors, rx_overrun_errors, rx_cdt_errors, 496 rx_short_frame_errors; 497 u32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported; 498 u16 xmt_tco_frames, rcv_tco_frames; 499 u32 complete; 500}; 501 502struct mem { 503 struct { 504 u32 signature; 505 u32 result; 506 } selftest; 507 struct stats stats; 508 u8 dump_buf[596]; 509}; 510 511struct param_range { 512 u32 min; 513 u32 max; 514 u32 count; 515}; 516 517struct params { 518 struct param_range rfds; 519 struct param_range cbs; 520}; 521 522struct nic { 523 /* Begin: frequently used values: keep adjacent for cache effect */ 524 u32 msg_enable ____cacheline_aligned; 525 struct net_device *netdev; 526 struct pci_dev *pdev; 527 528 struct rx *rxs ____cacheline_aligned; 529 struct rx *rx_to_use; 530 struct rx *rx_to_clean; 531 struct rfd blank_rfd; 532 enum ru_state ru_running; 533 534 spinlock_t cb_lock ____cacheline_aligned; 535 spinlock_t cmd_lock; 536 struct csr __iomem *csr; 537 enum scb_cmd_lo cuc_cmd; 538 unsigned int cbs_avail; 539 struct cb *cbs; 540 struct cb *cb_to_use; 541 struct cb *cb_to_send; 542 struct cb *cb_to_clean; 543 u16 tx_command; 544 /* End: frequently used values: keep adjacent for cache effect */ 545 546 enum { 547 ich = (1 << 0), 548 promiscuous = (1 << 1), 549 multicast_all = (1 << 2), 550 wol_magic = (1 << 3), 551 ich_10h_workaround = (1 << 4), 552 } flags ____cacheline_aligned; 553 554 enum mac mac; 555 enum phy phy; 556 struct params params; 557 struct net_device_stats net_stats; 558 struct timer_list watchdog; 559 struct timer_list blink_timer; 560 struct mii_if_info mii; 561 struct work_struct tx_timeout_task; 562 enum loopback loopback; 563 564 struct mem *mem; 565 dma_addr_t dma_addr; 566 567 dma_addr_t cbs_dma_addr; 568 u8 adaptive_ifs; 569 u8 tx_threshold; 570 u32 tx_frames; 571 u32 tx_collisions; 572 u32 tx_deferred; 573 u32 tx_single_collisions; 574 u32 tx_multiple_collisions; 575 u32 tx_fc_pause; 576 u32 tx_tco_frames; 577 578 u32 rx_fc_pause; 579 u32 rx_fc_unsupported; 580 u32 rx_tco_frames; 581 u32 rx_over_length_errors; 582 583 u8 rev_id; 584 u16 leds; 585 u16 eeprom_wc; 586 u16 eeprom[256]; 587 spinlock_t mdio_lock; 588}; 589 590static inline void e100_write_flush(struct nic *nic) 591{ 592 /* Flush previous PCI writes through intermediate bridges 593 * by doing a benign read */ 594 (void)readb(&nic->csr->scb.status); 595} 596 597static void e100_enable_irq(struct nic *nic) 598{ 599 unsigned long flags; 600 601 spin_lock_irqsave(&nic->cmd_lock, flags); 602 writeb(irq_mask_none, &nic->csr->scb.cmd_hi); 603 e100_write_flush(nic); 604 spin_unlock_irqrestore(&nic->cmd_lock, flags); 605} 606 607static void e100_disable_irq(struct nic *nic) 608{ 609 unsigned long flags; 610 611 spin_lock_irqsave(&nic->cmd_lock, flags); 612 writeb(irq_mask_all, &nic->csr->scb.cmd_hi); 613 e100_write_flush(nic); 614 spin_unlock_irqrestore(&nic->cmd_lock, flags); 615} 616 617static void e100_hw_reset(struct nic *nic) 618{ 619 /* Put CU and RU into idle with a selective reset to get 620 * device off of PCI bus */ 621 writel(selective_reset, &nic->csr->port); 622 e100_write_flush(nic); udelay(20); 623 624 /* Now fully reset device */ 625 writel(software_reset, &nic->csr->port); 626 e100_write_flush(nic); udelay(20); 627 628 /* Mask off our interrupt line - it's unmasked after reset */ 629 e100_disable_irq(nic); 630} 631 632static int e100_self_test(struct nic *nic) 633{ 634 u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest); 635 636 /* Passing the self-test is a pretty good indication 637 * that the device can DMA to/from host memory */ 638 639 nic->mem->selftest.signature = 0; 640 nic->mem->selftest.result = 0xFFFFFFFF; 641 642 writel(selftest | dma_addr, &nic->csr->port); 643 e100_write_flush(nic); 644 /* Wait 10 msec for self-test to complete */ 645 msleep(10); 646 647 /* Interrupts are enabled after self-test */ 648 e100_disable_irq(nic); 649 650 /* Check results of self-test */ 651 if(nic->mem->selftest.result != 0) { 652 DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n", 653 nic->mem->selftest.result); 654 return -ETIMEDOUT; 655 } 656 if(nic->mem->selftest.signature == 0) { 657 DPRINTK(HW, ERR, "Self-test failed: timed out\n"); 658 return -ETIMEDOUT; 659 } 660 661 return 0; 662} 663 664static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, u16 data) 665{ 666 u32 cmd_addr_data[3]; 667 u8 ctrl; 668 int i, j; 669 670 /* Three cmds: write/erase enable, write data, write/erase disable */ 671 cmd_addr_data[0] = op_ewen << (addr_len - 2); 672 cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) | 673 cpu_to_le16(data); 674 cmd_addr_data[2] = op_ewds << (addr_len - 2); 675 676 /* Bit-bang cmds to write word to eeprom */ 677 for(j = 0; j < 3; j++) { 678 679 /* Chip select */ 680 writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo); 681 e100_write_flush(nic); udelay(4); 682 683 for(i = 31; i >= 0; i--) { 684 ctrl = (cmd_addr_data[j] & (1 << i)) ? 685 eecs | eedi : eecs; 686 writeb(ctrl, &nic->csr->eeprom_ctrl_lo); 687 e100_write_flush(nic); udelay(4); 688 689 writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo); 690 e100_write_flush(nic); udelay(4); 691 } 692 /* Wait 10 msec for cmd to complete */ 693 msleep(10); 694 695 /* Chip deselect */ 696 writeb(0, &nic->csr->eeprom_ctrl_lo); 697 e100_write_flush(nic); udelay(4); 698 } 699}; 700 701/* General technique stolen from the eepro100 driver - very clever */ 702static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr) 703{ 704 u32 cmd_addr_data; 705 u16 data = 0; 706 u8 ctrl; 707 int i; 708 709 cmd_addr_data = ((op_read << *addr_len) | addr) << 16; 710 711 /* Chip select */ 712 writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo); 713 e100_write_flush(nic); udelay(4); 714 715 /* Bit-bang to read word from eeprom */ 716 for(i = 31; i >= 0; i--) { 717 ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs; 718 writeb(ctrl, &nic->csr->eeprom_ctrl_lo); 719 e100_write_flush(nic); udelay(4); 720 721 writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo); 722 e100_write_flush(nic); udelay(4); 723 724 /* Eeprom drives a dummy zero to EEDO after receiving 725 * complete address. Use this to adjust addr_len. */ 726 ctrl = readb(&nic->csr->eeprom_ctrl_lo); 727 if(!(ctrl & eedo) && i > 16) { 728 *addr_len -= (i - 16); 729 i = 17; 730 } 731 732 data = (data << 1) | (ctrl & eedo ? 1 : 0); 733 } 734 735 /* Chip deselect */ 736 writeb(0, &nic->csr->eeprom_ctrl_lo); 737 e100_write_flush(nic); udelay(4); 738 739 return le16_to_cpu(data); 740}; 741 742/* Load entire EEPROM image into driver cache and validate checksum */ 743static int e100_eeprom_load(struct nic *nic) 744{ 745 u16 addr, addr_len = 8, checksum = 0; 746 747 /* Try reading with an 8-bit addr len to discover actual addr len */ 748 e100_eeprom_read(nic, &addr_len, 0); 749 nic->eeprom_wc = 1 << addr_len; 750 751 for(addr = 0; addr < nic->eeprom_wc; addr++) { 752 nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr); 753 if(addr < nic->eeprom_wc - 1) 754 checksum += cpu_to_le16(nic->eeprom[addr]); 755 } 756 757 /* The checksum, stored in the last word, is calculated such that 758 * the sum of words should be 0xBABA */ 759 checksum = le16_to_cpu(0xBABA - checksum); 760 if(checksum != nic->eeprom[nic->eeprom_wc - 1]) { 761 DPRINTK(PROBE, ERR, "EEPROM corrupted\n"); 762 if (!eeprom_bad_csum_allow) 763 return -EAGAIN; 764 } 765 766 return 0; 767} 768 769/* Save (portion of) driver EEPROM cache to device and update checksum */ 770static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) 771{ 772 u16 addr, addr_len = 8, checksum = 0; 773 774 /* Try reading with an 8-bit addr len to discover actual addr len */ 775 e100_eeprom_read(nic, &addr_len, 0); 776 nic->eeprom_wc = 1 << addr_len; 777 778 if(start + count >= nic->eeprom_wc) 779 return -EINVAL; 780 781 for(addr = start; addr < start + count; addr++) 782 e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]); 783 784 /* The checksum, stored in the last word, is calculated such that 785 * the sum of words should be 0xBABA */ 786 for(addr = 0; addr < nic->eeprom_wc - 1; addr++) 787 checksum += cpu_to_le16(nic->eeprom[addr]); 788 nic->eeprom[nic->eeprom_wc - 1] = le16_to_cpu(0xBABA - checksum); 789 e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1, 790 nic->eeprom[nic->eeprom_wc - 1]); 791 792 return 0; 793} 794 795#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ 796#define E100_WAIT_SCB_FAST 20 /* delay like the old code */ 797static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) 798{ 799 unsigned long flags; 800 unsigned int i; 801 int err = 0; 802 803 spin_lock_irqsave(&nic->cmd_lock, flags); 804 805 /* Previous command is accepted when SCB clears */ 806 for(i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) { 807 if(likely(!readb(&nic->csr->scb.cmd_lo))) 808 break; 809 cpu_relax(); 810 if(unlikely(i > E100_WAIT_SCB_FAST)) 811 udelay(5); 812 } 813 if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) { 814 err = -EAGAIN; 815 goto err_unlock; 816 } 817 818 if(unlikely(cmd != cuc_resume)) 819 writel(dma_addr, &nic->csr->scb.gen_ptr); 820 writeb(cmd, &nic->csr->scb.cmd_lo); 821 822err_unlock: 823 spin_unlock_irqrestore(&nic->cmd_lock, flags); 824 825 return err; 826} 827 828static int e100_exec_cb(struct nic *nic, struct sk_buff *skb, 829 void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *)) 830{ 831 struct cb *cb; 832 unsigned long flags; 833 int err = 0; 834 835 spin_lock_irqsave(&nic->cb_lock, flags); 836 837 if(unlikely(!nic->cbs_avail)) { 838 err = -ENOMEM; 839 goto err_unlock; 840 } 841 842 cb = nic->cb_to_use; 843 nic->cb_to_use = cb->next; 844 nic->cbs_avail--; 845 cb->skb = skb; 846 847 if(unlikely(!nic->cbs_avail)) 848 err = -ENOSPC; 849 850 cb_prepare(nic, cb, skb); 851 852 /* Order is important otherwise we'll be in a race with h/w: 853 * set S-bit in current first, then clear S-bit in previous. */ 854 cb->command |= cpu_to_le16(cb_s); 855 wmb(); 856 cb->prev->command &= cpu_to_le16(~cb_s); 857 858 while(nic->cb_to_send != nic->cb_to_use) { 859 if(unlikely(e100_exec_cmd(nic, nic->cuc_cmd, 860 nic->cb_to_send->dma_addr))) { 861 /* Ok, here's where things get sticky. It's 862 * possible that we can't schedule the command 863 * because the controller is too busy, so 864 * let's just queue the command and try again 865 * when another command is scheduled. */ 866 if(err == -ENOSPC) { 867 //request a reset 868 schedule_work(&nic->tx_timeout_task); 869 } 870 break; 871 } else { 872 nic->cuc_cmd = cuc_resume; 873 nic->cb_to_send = nic->cb_to_send->next; 874 } 875 } 876 877err_unlock: 878 spin_unlock_irqrestore(&nic->cb_lock, flags); 879 880 return err; 881} 882 883static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data) 884{ 885 u32 data_out = 0; 886 unsigned int i; 887 unsigned long flags; 888 889 890 /* 891 * Stratus87247: we shouldn't be writing the MDI control 892 * register until the Ready bit shows True. Also, since 893 * manipulation of the MDI control registers is a multi-step 894 * procedure it should be done under lock. 895 */ 896 spin_lock_irqsave(&nic->mdio_lock, flags); 897 for (i = 100; i; --i) { 898 if (readl(&nic->csr->mdi_ctrl) & mdi_ready) 899 break; 900 udelay(20); 901 } 902 if (unlikely(!i)) { 903 printk("e100.mdio_ctrl(%s) won't go Ready\n", 904 nic->netdev->name ); 905 spin_unlock_irqrestore(&nic->mdio_lock, flags); 906 return 0; /* No way to indicate timeout error */ 907 } 908 writel((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl); 909 910 for (i = 0; i < 100; i++) { 911 udelay(20); 912 if ((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready) 913 break; 914 } 915 spin_unlock_irqrestore(&nic->mdio_lock, flags); 916 DPRINTK(HW, DEBUG, 917 "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n", 918 dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out); 919 return (u16)data_out; 920} 921 922static int mdio_read(struct net_device *netdev, int addr, int reg) 923{ 924 return mdio_ctrl(netdev_priv(netdev), addr, mdi_read, reg, 0); 925} 926 927static void mdio_write(struct net_device *netdev, int addr, int reg, int data) 928{ 929 mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data); 930} 931 932static void e100_get_defaults(struct nic *nic) 933{ 934 struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; 935 struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; 936 937 pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); 938 /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ 939 nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->rev_id; 940 if(nic->mac == mac_unknown) 941 nic->mac = mac_82557_D100_A; 942 943 nic->params.rfds = rfds; 944 nic->params.cbs = cbs; 945 946 /* Quadwords to DMA into FIFO before starting frame transmit */ 947 nic->tx_threshold = 0xE0; 948 949 /* no interrupt for every tx completion, delay = 256us if not 557*/ 950 nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf | 951 ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i)); 952 953 /* Template for a freshly allocated RFD */ 954 nic->blank_rfd.command = cpu_to_le16(cb_el); 955 nic->blank_rfd.rbd = 0xFFFFFFFF; 956 nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN); 957 958 /* MII setup */ 959 nic->mii.phy_id_mask = 0x1F; 960 nic->mii.reg_num_mask = 0x1F; 961 nic->mii.dev = nic->netdev; 962 nic->mii.mdio_read = mdio_read; 963 nic->mii.mdio_write = mdio_write; 964} 965 966static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) 967{ 968 struct config *config = &cb->u.config; 969 u8 *c = (u8 *)config; 970 971 cb->command = cpu_to_le16(cb_config); 972 973 memset(config, 0, sizeof(struct config)); 974 975 config->byte_count = 0x16; /* bytes in this struct */ 976 config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */ 977 config->direct_rx_dma = 0x1; /* reserved */ 978 config->standard_tcb = 0x1; /* 1=standard, 0=extended */ 979 config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */ 980 config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */ 981 config->tx_underrun_retry = 0x3; /* # of underrun retries */ 982 config->mii_mode = 0x1; /* 1=MII mode, 0=503 mode */ 983 config->pad10 = 0x6; 984 config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */ 985 config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */ 986 config->ifs = 0x6; /* x16 = inter frame spacing */ 987 config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */ 988 config->pad15_1 = 0x1; 989 config->pad15_2 = 0x1; 990 config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */ 991 config->fc_delay_hi = 0x40; /* time delay for fc frame */ 992 config->tx_padding = 0x1; /* 1=pad short frames */ 993 config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */ 994 config->pad18 = 0x1; 995 config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */ 996 config->pad20_1 = 0x1F; 997 config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */ 998 config->pad21_1 = 0x5; 999 1000 config->adaptive_ifs = nic->adaptive_ifs; 1001 config->loopback = nic->loopback; 1002 1003 if(nic->mii.force_media && nic->mii.full_duplex) 1004 config->full_duplex_force = 0x1; /* 1=force, 0=auto */ 1005 1006 if(nic->flags & promiscuous || nic->loopback) { 1007 config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */ 1008 config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */ 1009 config->promiscuous_mode = 0x1; /* 1=on, 0=off */ 1010 } 1011 1012 if(nic->flags & multicast_all) 1013 config->multicast_all = 0x1; /* 1=accept, 0=no */ 1014 1015 /* disable WoL when up */ 1016 if(netif_running(nic->netdev) || !(nic->flags & wol_magic)) 1017 config->magic_packet_disable = 0x1; /* 1=off, 0=on */ 1018 1019 if(nic->mac >= mac_82558_D101_A4) { 1020 config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */ 1021 config->mwi_enable = 0x1; /* 1=enable, 0=disable */ 1022 config->standard_tcb = 0x0; /* 1=standard, 0=extended */ 1023 config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */ 1024 if(nic->mac >= mac_82559_D101M) 1025 config->tno_intr = 0x1; /* TCO stats enable */ 1026 else 1027 config->standard_stat_counter = 0x0; 1028 } 1029 1030 DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", 1031 c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]); 1032 DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", 1033 c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]); 1034 DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", 1035 c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); 1036} 1037 1038/********************************************************/ 1039/* Micro code for 8086:1229 Rev 8 */ 1040/********************************************************/ 1041 1042/* Parameter values for the D101M B-step */ 1043#define D101M_CPUSAVER_TIMER_DWORD 78 1044#define D101M_CPUSAVER_BUNDLE_DWORD 65 1045#define D101M_CPUSAVER_MIN_SIZE_DWORD 126 1046 1047#define D101M_B_RCVBUNDLE_UCODE \ 1048{\ 10490x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \ 10500x000C0001, 0x00101312, 0x000C0008, 0x00380216, \ 10510x0010009C, 0x00204056, 0x002380CC, 0x00380056, \ 10520x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \ 10530x00380438, 0x00000000, 0x00140000, 0x00380555, \ 10540x00308000, 0x00100662, 0x00100561, 0x000E0408, \ 10550x00134861, 0x000C0002, 0x00103093, 0x00308000, \ 10560x00100624, 0x00100561, 0x000E0408, 0x00100861, \ 10570x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \ 10580x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \ 10590x00000000, 0x00000000, 0x00000000, 0x00000000, \ 10600x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \ 10610x003A0437, 0x00044010, 0x0038078A, 0x00000000, \ 10620x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \ 10630x00130824, 0x000C0001, 0x00101213, 0x00260C75, \ 10640x00041000, 0x00010004, 0x00130826, 0x000C0006, \ 10650x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \ 10660x00000000, 0x00000000, 0x00000000, 0x00000000, \ 10670x00000000, 0x00000000, 0x00000000, 0x00000000, \ 10680x00080600, 0x00101B10, 0x00050004, 0x00100826, \ 10690x00101210, 0x00380C34, 0x00000000, 0x00000000, \ 10700x0021155B, 0x00100099, 0x00206559, 0x0010009C, \ 10710x00244559, 0x00130836, 0x000C0000, 0x00220C62, \ 10720x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \ 10730x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \ 10740x00214C0E, 0x00380555, 0x00010004, 0x00041000, \ 10750x00278C67, 0x00040800, 0x00018100, 0x003A0437, \ 10760x00130826, 0x000C0001, 0x00220559, 0x00101313, \ 10770x00380559, 0x00000000, 0x00000000, 0x00000000, \ 10780x00000000, 0x00000000, 0x00000000, 0x00000000, \ 10790x00000000, 0x00130831, 0x0010090B, 0x00124813, \ 10800x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \ 10810x003806A8, 0x00000000, 0x00000000, 0x00000000, \ 1082} 1083 1084/********************************************************/ 1085/* Micro code for 8086:1229 Rev 9 */ 1086/********************************************************/ 1087 1088/* Parameter values for the D101S */ 1089#define D101S_CPUSAVER_TIMER_DWORD 78 1090#define D101S_CPUSAVER_BUNDLE_DWORD 67 1091#define D101S_CPUSAVER_MIN_SIZE_DWORD 128 1092 1093#define D101S_RCVBUNDLE_UCODE \ 1094{\ 10950x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \ 10960x000C0001, 0x00101312, 0x000C0008, 0x00380243, \ 10970x0010009C, 0x00204056, 0x002380D0, 0x00380056, \ 10980x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \ 10990x0038047F, 0x00000000, 0x00140000, 0x003805A3, \ 11000x00308000, 0x00100610, 0x00100561, 0x000E0408, \ 11010x00134861, 0x000C0002, 0x00103093, 0x00308000, \ 11020x00100624, 0x00100561, 0x000E0408, 0x00100861, \ 11030x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \ 11040x00380F90, 0x00080000, 0x00103090, 0x00380F90, \ 11050x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11060x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \ 11070x003A047E, 0x00044010, 0x00380819, 0x00000000, \ 11080x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \ 11090x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \ 11100x00101213, 0x00260FF7, 0x00041000, 0x00010004, \ 11110x00130826, 0x000C0006, 0x00220700, 0x0013C926, \ 11120x00101313, 0x00380700, 0x00000000, 0x00000000, \ 11130x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11140x00080600, 0x00101B10, 0x00050004, 0x00100826, \ 11150x00101210, 0x00380FB6, 0x00000000, 0x00000000, \ 11160x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \ 11170x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \ 11180x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \ 11190x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \ 11200x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \ 11210x00010004, 0x00041000, 0x00278FE9, 0x00040800, \ 11220x00018100, 0x003A047E, 0x00130826, 0x000C0001, \ 11230x002205A7, 0x00101313, 0x003805A7, 0x00000000, \ 11240x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11250x00000000, 0x00000000, 0x00000000, 0x00130831, \ 11260x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \ 11270x00041000, 0x00010004, 0x00380700 \ 1128} 1129 1130/********************************************************/ 1131/* Micro code for the 8086:1229 Rev F/10 */ 1132/********************************************************/ 1133 1134/* Parameter values for the D102 E-step */ 1135#define D102_E_CPUSAVER_TIMER_DWORD 42 1136#define D102_E_CPUSAVER_BUNDLE_DWORD 54 1137#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46 1138 1139#define D102_E_RCVBUNDLE_UCODE \ 1140{\ 11410x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \ 11420x00E014B9, 0x00000000, 0x00000000, 0x00000000, \ 11430x00E014BD, 0x00000000, 0x00000000, 0x00000000, \ 11440x00E014D5, 0x00000000, 0x00000000, 0x00000000, \ 11450x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11460x00E014C1, 0x00000000, 0x00000000, 0x00000000, \ 11470x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11480x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11490x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11500x00E014C8, 0x00000000, 0x00000000, 0x00000000, \ 11510x00200600, 0x00E014EE, 0x00000000, 0x00000000, \ 11520x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \ 11530x00E00E43, 0x00000000, 0x00000000, 0x00000000, \ 11540x00300006, 0x00E014FB, 0x00000000, 0x00000000, \ 11550x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11560x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11570x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11580x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \ 11590x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \ 11600x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11610x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11620x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11630x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11640x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11650x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11660x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11670x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11680x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11690x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11700x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11710x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11720x00000000, 0x00000000, 0x00000000, 0x00000000, \ 11730x00000000, 0x00000000, 0x00000000, 0x00000000, \ 1174} 1175 1176static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) 1177{ 1178/* *INDENT-OFF* */ 1179 static struct { 1180 u32 ucode[UCODE_SIZE + 1]; 1181 u8 mac; 1182 u8 timer_dword; 1183 u8 bundle_dword; 1184 u8 min_size_dword; 1185 } ucode_opts[] = { 1186 { D101M_B_RCVBUNDLE_UCODE, 1187 mac_82559_D101M, 1188 D101M_CPUSAVER_TIMER_DWORD, 1189 D101M_CPUSAVER_BUNDLE_DWORD, 1190 D101M_CPUSAVER_MIN_SIZE_DWORD }, 1191 { D101S_RCVBUNDLE_UCODE, 1192 mac_82559_D101S, 1193 D101S_CPUSAVER_TIMER_DWORD, 1194 D101S_CPUSAVER_BUNDLE_DWORD, 1195 D101S_CPUSAVER_MIN_SIZE_DWORD }, 1196 { D102_E_RCVBUNDLE_UCODE, 1197 mac_82551_F, 1198 D102_E_CPUSAVER_TIMER_DWORD, 1199 D102_E_CPUSAVER_BUNDLE_DWORD, 1200 D102_E_CPUSAVER_MIN_SIZE_DWORD }, 1201 { D102_E_RCVBUNDLE_UCODE, 1202 mac_82551_10, 1203 D102_E_CPUSAVER_TIMER_DWORD, 1204 D102_E_CPUSAVER_BUNDLE_DWORD, 1205 D102_E_CPUSAVER_MIN_SIZE_DWORD }, 1206 { {0}, 0, 0, 0, 0} 1207 }, *opts; 1208/* *INDENT-ON* */ 1209 1210/************************************************************************* 1211* CPUSaver parameters 1212* 1213* All CPUSaver parameters are 16-bit literals that are part of a 1214* "move immediate value" instruction. By changing the value of 1215* the literal in the instruction before the code is loaded, the 1216* driver can change the algorithm. 1217* 1218* INTDELAY - This loads the dead-man timer with its inital value. 1219* When this timer expires the interrupt is asserted, and the 1220* timer is reset each time a new packet is received. (see 1221* BUNDLEMAX below to set the limit on number of chained packets) 1222* The current default is 0x600 or 1536. Experiments show that 1223* the value should probably stay within the 0x200 - 0x1000. 1224* 1225* BUNDLEMAX - 1226* This sets the maximum number of frames that will be bundled. In 1227* some situations, such as the TCP windowing algorithm, it may be 1228* better to limit the growth of the bundle size than let it go as 1229* high as it can, because that could cause too much added latency. 1230* The default is six, because this is the number of packets in the 1231* default TCP window size. A value of 1 would make CPUSaver indicate 1232* an interrupt for every frame received. If you do not want to put 1233* a limit on the bundle size, set this value to xFFFF. 1234* 1235* BUNDLESMALL - 1236* This contains a bit-mask describing the minimum size frame that 1237* will be bundled. The default masks the lower 7 bits, which means 1238* that any frame less than 128 bytes in length will not be bundled, 1239* but will instead immediately generate an interrupt. This does 1240* not affect the current bundle in any way. Any frame that is 128 1241* bytes or large will be bundled normally. This feature is meant 1242* to provide immediate indication of ACK frames in a TCP environment. 1243* Customers were seeing poor performance when a machine with CPUSaver 1244* enabled was sending but not receiving. The delay introduced when 1245* the ACKs were received was enough to reduce total throughput, because 1246* the sender would sit idle until the ACK was finally seen. 1247* 1248* The current default is 0xFF80, which masks out the lower 7 bits. 1249* This means that any frame which is x7F (127) bytes or smaller 1250* will cause an immediate interrupt. Because this value must be a 1251* bit mask, there are only a few valid values that can be used. To 1252* turn this feature off, the driver can write the value xFFFF to the 1253* lower word of this instruction (in the same way that the other 1254* parameters are used). Likewise, a value of 0xF800 (2047) would 1255* cause an interrupt to be generated for every frame, because all 1256* standard Ethernet frames are <= 2047 bytes in length. 1257*************************************************************************/ 1258 1259/* if you wish to disable the ucode functionality, while maintaining the 1260 * workarounds it provides, set the following defines to: 1261 * BUNDLESMALL 0 1262 * BUNDLEMAX 1 1263 * INTDELAY 1 1264 */ 1265#define BUNDLESMALL 1 1266#define BUNDLEMAX (u16)6 1267#define INTDELAY (u16)1536 /* 0x600 */ 1268 1269 /* do not load u-code for ICH devices */ 1270 if (nic->flags & ich) 1271 goto noloaducode; 1272 1273 /* Search for ucode match against h/w rev_id */ 1274 for (opts = ucode_opts; opts->mac; opts++) { 1275 int i; 1276 u32 *ucode = opts->ucode; 1277 if (nic->mac != opts->mac) 1278 continue; 1279 1280 /* Insert user-tunable settings */ 1281 ucode[opts->timer_dword] &= 0xFFFF0000; 1282 ucode[opts->timer_dword] |= INTDELAY; 1283 ucode[opts->bundle_dword] &= 0xFFFF0000; 1284 ucode[opts->bundle_dword] |= BUNDLEMAX; 1285 ucode[opts->min_size_dword] &= 0xFFFF0000; 1286 ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80; 1287 1288 for (i = 0; i < UCODE_SIZE; i++) 1289 cb->u.ucode[i] = cpu_to_le32(ucode[i]); 1290 cb->command = cpu_to_le16(cb_ucode | cb_el); 1291 return; 1292 } 1293 1294noloaducode: 1295 cb->command = cpu_to_le16(cb_nop | cb_el); 1296} 1297 1298static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb, 1299 void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *)) 1300{ 1301 int err = 0, counter = 50; 1302 struct cb *cb = nic->cb_to_clean; 1303 1304 if ((err = e100_exec_cb(nic, NULL, e100_setup_ucode))) 1305 DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err); 1306 1307 /* must restart cuc */ 1308 nic->cuc_cmd = cuc_start; 1309 1310 /* wait for completion */ 1311 e100_write_flush(nic); 1312 udelay(10); 1313 1314 /* wait for possibly (ouch) 500ms */ 1315 while (!(cb->status & cpu_to_le16(cb_complete))) { 1316 msleep(10); 1317 if (!--counter) break; 1318 } 1319 1320 /* ack any interupts, something could have been set */ 1321 writeb(~0, &nic->csr->scb.stat_ack); 1322 1323 /* if the command failed, or is not OK, notify and return */ 1324 if (!counter || !(cb->status & cpu_to_le16(cb_ok))) { 1325 DPRINTK(PROBE,ERR, "ucode load failed\n"); 1326 err = -EPERM; 1327 } 1328 1329 return err; 1330} 1331 1332static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, 1333 struct sk_buff *skb) 1334{ 1335 cb->command = cpu_to_le16(cb_iaaddr); 1336 memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN); 1337} 1338 1339static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb) 1340{ 1341 cb->command = cpu_to_le16(cb_dump); 1342 cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr + 1343 offsetof(struct mem, dump_buf)); 1344} 1345 1346#define NCONFIG_AUTO_SWITCH 0x0080 1347#define MII_NSC_CONG MII_RESV1 1348#define NSC_CONG_ENABLE 0x0100 1349#define NSC_CONG_TXREADY 0x0400 1350#define ADVERTISE_FC_SUPPORTED 0x0400 1351static int e100_phy_init(struct nic *nic) 1352{ 1353 struct net_device *netdev = nic->netdev; 1354 u32 addr; 1355 u16 bmcr, stat, id_lo, id_hi, cong; 1356 1357 /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */ 1358 for(addr = 0; addr < 32; addr++) { 1359 nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr; 1360 bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR); 1361 stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR); 1362 stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR); 1363 if(!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0)))) 1364 break; 1365 } 1366 DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id); 1367 if(addr == 32) 1368 return -EAGAIN; 1369 1370 /* Selected the phy and isolate the rest */ 1371 for(addr = 0; addr < 32; addr++) { 1372 if(addr != nic->mii.phy_id) { 1373 mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); 1374 } else { 1375 bmcr = mdio_read(netdev, addr, MII_BMCR); 1376 mdio_write(netdev, addr, MII_BMCR, 1377 bmcr & ~BMCR_ISOLATE); 1378 } 1379 } 1380 1381 /* Get phy ID */ 1382 id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1); 1383 id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2); 1384 nic->phy = (u32)id_hi << 16 | (u32)id_lo; 1385 DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy); 1386 1387 /* Handle National tx phys */ 1388#define NCS_PHY_MODEL_MASK 0xFFF0FFFF 1389 if((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) { 1390 /* Disable congestion control */ 1391 cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG); 1392 cong |= NSC_CONG_TXREADY; 1393 cong &= ~NSC_CONG_ENABLE; 1394 mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong); 1395 } 1396 1397 if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && 1398 (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) && 1399 !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) { 1400 /* enable/disable MDI/MDI-X auto-switching. */ 1401 mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG, 1402 nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH); 1403 } 1404 1405 return 0; 1406} 1407 1408static int e100_hw_init(struct nic *nic) 1409{ 1410 int err; 1411 1412 e100_hw_reset(nic); 1413 1414 DPRINTK(HW, ERR, "e100_hw_init\n"); 1415 if(!in_interrupt() && (err = e100_self_test(nic))) 1416 return err; 1417 1418 if((err = e100_phy_init(nic))) 1419 return err; 1420 if((err = e100_exec_cmd(nic, cuc_load_base, 0))) 1421 return err; 1422 if((err = e100_exec_cmd(nic, ruc_load_base, 0))) 1423 return err; 1424 if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode))) 1425 return err; 1426 if((err = e100_exec_cb(nic, NULL, e100_configure))) 1427 return err; 1428 if((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr))) 1429 return err; 1430 if((err = e100_exec_cmd(nic, cuc_dump_addr, 1431 nic->dma_addr + offsetof(struct mem, stats)))) 1432 return err; 1433 if((err = e100_exec_cmd(nic, cuc_dump_reset, 0))) 1434 return err; 1435 1436 e100_disable_irq(nic); 1437 1438 return 0; 1439} 1440 1441static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb) 1442{ 1443 struct net_device *netdev = nic->netdev; 1444 struct dev_mc_list *list = netdev->mc_list; 1445 u16 i, count = min(netdev->mc_count, E100_MAX_MULTICAST_ADDRS); 1446 1447 cb->command = cpu_to_le16(cb_multi); 1448 cb->u.multi.count = cpu_to_le16(count * ETH_ALEN); 1449 for(i = 0; list && i < count; i++, list = list->next) 1450 memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr, 1451 ETH_ALEN); 1452} 1453 1454static void e100_set_multicast_list(struct net_device *netdev) 1455{ 1456 struct nic *nic = netdev_priv(netdev); 1457 1458 DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n", 1459 netdev->mc_count, netdev->flags); 1460 1461 if(netdev->flags & IFF_PROMISC) 1462 nic->flags |= promiscuous; 1463 else 1464 nic->flags &= ~promiscuous; 1465 1466 if(netdev->flags & IFF_ALLMULTI || 1467 netdev->mc_count > E100_MAX_MULTICAST_ADDRS) 1468 nic->flags |= multicast_all; 1469 else 1470 nic->flags &= ~multicast_all; 1471 1472 e100_exec_cb(nic, NULL, e100_configure); 1473 e100_exec_cb(nic, NULL, e100_multi); 1474} 1475 1476static void e100_update_stats(struct nic *nic) 1477{ 1478 struct net_device_stats *ns = &nic->net_stats; 1479 struct stats *s = &nic->mem->stats; 1480 u32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause : 1481 (nic->mac < mac_82559_D101M) ? (u32 *)&s->xmt_tco_frames : 1482 &s->complete; 1483 1484 /* Device's stats reporting may take several microseconds to 1485 * complete, so where always waiting for results of the 1486 * previous command. */ 1487 1488 if(*complete == le32_to_cpu(cuc_dump_reset_complete)) { 1489 *complete = 0; 1490 nic->tx_frames = le32_to_cpu(s->tx_good_frames); 1491 nic->tx_collisions = le32_to_cpu(s->tx_total_collisions); 1492 ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions); 1493 ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions); 1494 ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs); 1495 ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns); 1496 ns->collisions += nic->tx_collisions; 1497 ns->tx_errors += le32_to_cpu(s->tx_max_collisions) + 1498 le32_to_cpu(s->tx_lost_crs); 1499 ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) + 1500 nic->rx_over_length_errors; 1501 ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors); 1502 ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors); 1503 ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors); 1504 ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors); 1505 ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors); 1506 ns->rx_errors += le32_to_cpu(s->rx_crc_errors) + 1507 le32_to_cpu(s->rx_alignment_errors) + 1508 le32_to_cpu(s->rx_short_frame_errors) + 1509 le32_to_cpu(s->rx_cdt_errors); 1510 nic->tx_deferred += le32_to_cpu(s->tx_deferred); 1511 nic->tx_single_collisions += 1512 le32_to_cpu(s->tx_single_collisions); 1513 nic->tx_multiple_collisions += 1514 le32_to_cpu(s->tx_multiple_collisions); 1515 if(nic->mac >= mac_82558_D101_A4) { 1516 nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause); 1517 nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause); 1518 nic->rx_fc_unsupported += 1519 le32_to_cpu(s->fc_rcv_unsupported); 1520 if(nic->mac >= mac_82559_D101M) { 1521 nic->tx_tco_frames += 1522 le16_to_cpu(s->xmt_tco_frames); 1523 nic->rx_tco_frames += 1524 le16_to_cpu(s->rcv_tco_frames); 1525 } 1526 } 1527 } 1528 1529 1530 if(e100_exec_cmd(nic, cuc_dump_reset, 0)) 1531 DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n"); 1532} 1533 1534static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex) 1535{ 1536 /* Adjust inter-frame-spacing (IFS) between two transmits if 1537 * we're getting collisions on a half-duplex connection. */ 1538 1539 if(duplex == DUPLEX_HALF) { 1540 u32 prev = nic->adaptive_ifs; 1541 u32 min_frames = (speed == SPEED_100) ? 1000 : 100; 1542 1543 if((nic->tx_frames / 32 < nic->tx_collisions) && 1544 (nic->tx_frames > min_frames)) { 1545 if(nic->adaptive_ifs < 60) 1546 nic->adaptive_ifs += 5; 1547 } else if (nic->tx_frames < min_frames) { 1548 if(nic->adaptive_ifs >= 5) 1549 nic->adaptive_ifs -= 5; 1550 } 1551 if(nic->adaptive_ifs != prev) 1552 e100_exec_cb(nic, NULL, e100_configure); 1553 } 1554} 1555 1556static void e100_watchdog(unsigned long data) 1557{ 1558 struct nic *nic = (struct nic *)data; 1559 struct ethtool_cmd cmd; 1560 1561 DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies); 1562 1563 /* mii library handles link maintenance tasks */ 1564 1565 mii_ethtool_gset(&nic->mii, &cmd); 1566 1567 if(mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) { 1568 DPRINTK(LINK, INFO, "link up, %sMbps, %s-duplex\n", 1569 cmd.speed == SPEED_100 ? "100" : "10", 1570 cmd.duplex == DUPLEX_FULL ? "full" : "half"); 1571 } else if(!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) { 1572 DPRINTK(LINK, INFO, "link down\n"); 1573 } 1574 1575 mii_check_link(&nic->mii); 1576 1577 /* Software generated interrupt to recover from (rare) Rx 1578 * allocation failure. 1579 * Unfortunately have to use a spinlock to not re-enable interrupts 1580 * accidentally, due to hardware that shares a register between the 1581 * interrupt mask bit and the SW Interrupt generation bit */ 1582 spin_lock_irq(&nic->cmd_lock); 1583 writeb(readb(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi); 1584 e100_write_flush(nic); 1585 spin_unlock_irq(&nic->cmd_lock); 1586 1587 e100_update_stats(nic); 1588 e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex); 1589 1590 if(nic->mac <= mac_82557_D100_C) 1591 /* Issue a multicast command to workaround a 557 lock up */ 1592 e100_set_multicast_list(nic->netdev); 1593 1594 if(nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF) 1595 /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */ 1596 nic->flags |= ich_10h_workaround; 1597 else 1598 nic->flags &= ~ich_10h_workaround; 1599 1600 mod_timer(&nic->watchdog, jiffies + E100_WATCHDOG_PERIOD); 1601} 1602 1603static void e100_xmit_prepare(struct nic *nic, struct cb *cb, 1604 struct sk_buff *skb) 1605{ 1606 cb->command = nic->tx_command; 1607 /* interrupt every 16 packets regardless of delay */ 1608 if((nic->cbs_avail & ~15) == nic->cbs_avail) 1609 cb->command |= cpu_to_le16(cb_i); 1610 cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); 1611 cb->u.tcb.tcb_byte_count = 0; 1612 cb->u.tcb.threshold = nic->tx_threshold; 1613 cb->u.tcb.tbd_count = 1; 1614 cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, 1615 skb->data, skb->len, PCI_DMA_TODEVICE)); 1616 /* check for mapping failure? */ 1617 cb->u.tcb.tbd.size = cpu_to_le16(skb->len); 1618} 1619 1620static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev) 1621{ 1622 struct nic *nic = netdev_priv(netdev); 1623 int err; 1624 1625 if(nic->flags & ich_10h_workaround) { 1626 /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang. 1627 Issue a NOP command followed by a 1us delay before 1628 issuing the Tx command. */ 1629 if(e100_exec_cmd(nic, cuc_nop, 0)) 1630 DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n"); 1631 udelay(1); 1632 } 1633 1634 err = e100_exec_cb(nic, skb, e100_xmit_prepare); 1635 1636 switch(err) { 1637 case -ENOSPC: 1638 /* We queued the skb, but now we're out of space. */ 1639 DPRINTK(TX_ERR, DEBUG, "No space for CB\n"); 1640 netif_stop_queue(netdev); 1641 break; 1642 case -ENOMEM: 1643 /* This is a hard error - log it. */ 1644 DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n"); 1645 netif_stop_queue(netdev); 1646 return 1; 1647 } 1648 1649 netdev->trans_start = jiffies; 1650 return 0; 1651} 1652 1653static int e100_tx_clean(struct nic *nic) 1654{ 1655 struct cb *cb; 1656 int tx_cleaned = 0; 1657 1658 spin_lock(&nic->cb_lock); 1659 1660 /* Clean CBs marked complete */ 1661 for(cb = nic->cb_to_clean; 1662 cb->status & cpu_to_le16(cb_complete); 1663 cb = nic->cb_to_clean = cb->next) { 1664 DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n", 1665 (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)), 1666 cb->status); 1667 1668 if(likely(cb->skb != NULL)) { 1669 nic->net_stats.tx_packets++; 1670 nic->net_stats.tx_bytes += cb->skb->len; 1671 1672 pci_unmap_single(nic->pdev, 1673 le32_to_cpu(cb->u.tcb.tbd.buf_addr), 1674 le16_to_cpu(cb->u.tcb.tbd.size), 1675 PCI_DMA_TODEVICE); 1676 dev_kfree_skb_any(cb->skb); 1677 cb->skb = NULL; 1678 tx_cleaned = 1; 1679 } 1680 cb->status = 0; 1681 nic->cbs_avail++; 1682 } 1683 1684 spin_unlock(&nic->cb_lock); 1685 1686 /* Recover from running out of Tx resources in xmit_frame */ 1687 if(unlikely(tx_cleaned && netif_queue_stopped(nic->netdev))) 1688 netif_wake_queue(nic->netdev); 1689 1690 return tx_cleaned; 1691} 1692 1693static void e100_clean_cbs(struct nic *nic) 1694{ 1695 if(nic->cbs) { 1696 while(nic->cbs_avail != nic->params.cbs.count) { 1697 struct cb *cb = nic->cb_to_clean; 1698 if(cb->skb) { 1699 pci_unmap_single(nic->pdev, 1700 le32_to_cpu(cb->u.tcb.tbd.buf_addr), 1701 le16_to_cpu(cb->u.tcb.tbd.size), 1702 PCI_DMA_TODEVICE); 1703 dev_kfree_skb(cb->skb); 1704 } 1705 nic->cb_to_clean = nic->cb_to_clean->next; 1706 nic->cbs_avail++; 1707 } 1708 pci_free_consistent(nic->pdev, 1709 sizeof(struct cb) * nic->params.cbs.count, 1710 nic->cbs, nic->cbs_dma_addr); 1711 nic->cbs = NULL; 1712 nic->cbs_avail = 0; 1713 } 1714 nic->cuc_cmd = cuc_start; 1715 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = 1716 nic->cbs; 1717} 1718 1719static int e100_alloc_cbs(struct nic *nic) 1720{ 1721 struct cb *cb; 1722 unsigned int i, count = nic->params.cbs.count; 1723 1724 nic->cuc_cmd = cuc_start; 1725 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL; 1726 nic->cbs_avail = 0; 1727 1728 nic->cbs = pci_alloc_consistent(nic->pdev, 1729 sizeof(struct cb) * count, &nic->cbs_dma_addr); 1730 if(!nic->cbs) 1731 return -ENOMEM; 1732 1733 for(cb = nic->cbs, i = 0; i < count; cb++, i++) { 1734 cb->next = (i + 1 < count) ? cb + 1 : nic->cbs; 1735 cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1; 1736 1737 cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb); 1738 cb->link = cpu_to_le32(nic->cbs_dma_addr + 1739 ((i+1) % count) * sizeof(struct cb)); 1740 cb->skb = NULL; 1741 } 1742 1743 nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs; 1744 nic->cbs_avail = count; 1745 1746 return 0; 1747} 1748 1749static inline void e100_start_receiver(struct nic *nic, struct rx *rx) 1750{ 1751 if(!nic->rxs) return; 1752 if(RU_SUSPENDED != nic->ru_running) return; 1753 1754 /* handle init time starts */ 1755 if(!rx) rx = nic->rxs; 1756 1757 /* (Re)start RU if suspended or idle and RFA is non-NULL */ 1758 if(rx->skb) { 1759 e100_exec_cmd(nic, ruc_start, rx->dma_addr); 1760 nic->ru_running = RU_RUNNING; 1761 } 1762} 1763 1764#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN) 1765static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) 1766{ 1767 if(!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN))) 1768 return -ENOMEM; 1769 1770 /* Align, init, and map the RFD. */ 1771 skb_reserve(rx->skb, NET_IP_ALIGN); 1772 memcpy(rx->skb->data, &nic->blank_rfd, sizeof(struct rfd)); 1773 rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data, 1774 RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); 1775 1776 if(pci_dma_mapping_error(rx->dma_addr)) { 1777 dev_kfree_skb_any(rx->skb); 1778 rx->skb = NULL; 1779 rx->dma_addr = 0; 1780 return -ENOMEM; 1781 } 1782 1783 /* Link the RFD to end of RFA by linking previous RFD to 1784 * this one, and clearing EL bit of previous. */ 1785 if(rx->prev->skb) { 1786 struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; 1787 put_unaligned(cpu_to_le32(rx->dma_addr), 1788 (u32 *)&prev_rfd->link); 1789 wmb(); 1790 prev_rfd->command &= ~cpu_to_le16(cb_el); 1791 pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, 1792 sizeof(struct rfd), PCI_DMA_TODEVICE); 1793 } 1794 1795 return 0; 1796} 1797 1798static int e100_rx_indicate(struct nic *nic, struct rx *rx, 1799 unsigned int *work_done, unsigned int work_to_do) 1800{ 1801 struct sk_buff *skb = rx->skb; 1802 struct rfd *rfd = (struct rfd *)skb->data; 1803 u16 rfd_status, actual_size; 1804 1805 if(unlikely(work_done && *work_done >= work_to_do)) 1806 return -EAGAIN; 1807 1808 /* Need to sync before taking a peek at cb_complete bit */ 1809 pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, 1810 sizeof(struct rfd), PCI_DMA_FROMDEVICE); 1811 rfd_status = le16_to_cpu(rfd->status); 1812 1813 DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); 1814 1815 /* If data isn't ready, nothing to indicate */ 1816 if(unlikely(!(rfd_status & cb_complete))) 1817 return -ENODATA; 1818 1819 /* Get actual data size */ 1820 actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF; 1821 if(unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd))) 1822 actual_size = RFD_BUF_LEN - sizeof(struct rfd); 1823 1824 /* Get data */ 1825 pci_unmap_single(nic->pdev, rx->dma_addr, 1826 RFD_BUF_LEN, PCI_DMA_FROMDEVICE); 1827 1828 /* this allows for a fast restart without re-enabling interrupts */ 1829 if(le16_to_cpu(rfd->command) & cb_el) 1830 nic->ru_running = RU_SUSPENDED; 1831 1832 /* Pull off the RFD and put the actual data (minus eth hdr) */ 1833 skb_reserve(skb, sizeof(struct rfd)); 1834 skb_put(skb, actual_size); 1835 skb->protocol = eth_type_trans(skb, nic->netdev); 1836 1837 if(unlikely(!(rfd_status & cb_ok))) { 1838 /* Don't indicate if hardware indicates errors */ 1839 dev_kfree_skb_any(skb); 1840 } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) { 1841 /* Don't indicate oversized frames */ 1842 nic->rx_over_length_errors++; 1843 dev_kfree_skb_any(skb); 1844 } else { 1845 nic->net_stats.rx_packets++; 1846 nic->net_stats.rx_bytes += actual_size; 1847 nic->netdev->last_rx = jiffies; 1848 netif_receive_skb(skb); 1849 if(work_done) 1850 (*work_done)++; 1851 } 1852 1853 rx->skb = NULL; 1854 1855 return 0; 1856} 1857 1858static void e100_rx_clean(struct nic *nic, unsigned int *work_done, 1859 unsigned int work_to_do) 1860{ 1861 struct rx *rx; 1862 int restart_required = 0; 1863 struct rx *rx_to_start = NULL; 1864 1865 /* are we already rnr? then pay attention!!! this ensures that 1866 * the state machine progression never allows a start with a 1867 * partially cleaned list, avoiding a race between hardware 1868 * and rx_to_clean when in NAPI mode */ 1869 if(RU_SUSPENDED == nic->ru_running) 1870 restart_required = 1; 1871 1872 /* Indicate newly arrived packets */ 1873 for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) { 1874 int err = e100_rx_indicate(nic, rx, work_done, work_to_do); 1875 if(-EAGAIN == err) { 1876 /* hit quota so have more work to do, restart once 1877 * cleanup is complete */ 1878 restart_required = 0; 1879 break; 1880 } else if(-ENODATA == err) 1881 break; /* No more to clean */ 1882 } 1883 1884 /* save our starting point as the place we'll restart the receiver */ 1885 if(restart_required) 1886 rx_to_start = nic->rx_to_clean; 1887 1888 /* Alloc new skbs to refill list */ 1889 for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) { 1890 if(unlikely(e100_rx_alloc_skb(nic, rx))) 1891 break; /* Better luck next time (see watchdog) */ 1892 } 1893 1894 if(restart_required) { 1895 // ack the rnr? 1896 writeb(stat_ack_rnr, &nic->csr->scb.stat_ack); 1897 e100_start_receiver(nic, rx_to_start); 1898 if(work_done) 1899 (*work_done)++; 1900 } 1901} 1902 1903static void e100_rx_clean_list(struct nic *nic) 1904{ 1905 struct rx *rx; 1906 unsigned int i, count = nic->params.rfds.count; 1907 1908 nic->ru_running = RU_UNINITIALIZED; 1909 1910 if(nic->rxs) { 1911 for(rx = nic->rxs, i = 0; i < count; rx++, i++) { 1912 if(rx->skb) { 1913 pci_unmap_single(nic->pdev, rx->dma_addr, 1914 RFD_BUF_LEN, PCI_DMA_FROMDEVICE); 1915 dev_kfree_skb(rx->skb); 1916 } 1917 } 1918 kfree(nic->rxs); 1919 nic->rxs = NULL; 1920 } 1921 1922 nic->rx_to_use = nic->rx_to_clean = NULL; 1923} 1924 1925static int e100_rx_alloc_list(struct nic *nic) 1926{ 1927 struct rx *rx; 1928 unsigned int i, count = nic->params.rfds.count; 1929 1930 nic->rx_to_use = nic->rx_to_clean = NULL; 1931 nic->ru_running = RU_UNINITIALIZED; 1932 1933 if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC))) 1934 return -ENOMEM; 1935 memset(nic->rxs, 0, sizeof(struct rx) * count); 1936 1937 for(rx = nic->rxs, i = 0; i < count; rx++, i++) { 1938 rx->next = (i + 1 < count) ? rx + 1 : nic->rxs; 1939 rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1; 1940 if(e100_rx_alloc_skb(nic, rx)) { 1941 e100_rx_clean_list(nic); 1942 return -ENOMEM; 1943 } 1944 } 1945 1946 nic->rx_to_use = nic->rx_to_clean = nic->rxs; 1947 nic->ru_running = RU_SUSPENDED; 1948 1949 return 0; 1950} 1951 1952static irqreturn_t e100_intr(int irq, void *dev_id) 1953{ 1954 struct net_device *netdev = dev_id; 1955 struct nic *nic = netdev_priv(netdev); 1956 u8 stat_ack = readb(&nic->csr->scb.stat_ack); 1957 1958 DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack); 1959 1960 if(stat_ack == stat_ack_not_ours || /* Not our interrupt */ 1961 stat_ack == stat_ack_not_present) /* Hardware is ejected */ 1962 return IRQ_NONE; 1963 1964 /* Ack interrupt(s) */ 1965 writeb(stat_ack, &nic->csr->scb.stat_ack); 1966 1967 /* We hit Receive No Resource (RNR); restart RU after cleaning */ 1968 if(stat_ack & stat_ack_rnr) 1969 nic->ru_running = RU_SUSPENDED; 1970 1971 if(likely(netif_rx_schedule_prep(netdev))) { 1972 e100_disable_irq(nic); 1973 __netif_rx_schedule(netdev); 1974 } 1975 1976 return IRQ_HANDLED; 1977} 1978 1979static int e100_poll(struct net_device *netdev, int *budget) 1980{ 1981 struct nic *nic = netdev_priv(netdev); 1982 unsigned int work_to_do = min(netdev->quota, *budget); 1983 unsigned int work_done = 0; 1984 int tx_cleaned; 1985 1986 e100_rx_clean(nic, &work_done, work_to_do); 1987 tx_cleaned = e100_tx_clean(nic); 1988 1989 /* If no Rx and Tx cleanup work was done, exit polling mode. */ 1990 if((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) { 1991 netif_rx_complete(netdev); 1992 e100_enable_irq(nic); 1993 return 0; 1994 } 1995 1996 *budget -= work_done; 1997 netdev->quota -= work_done; 1998 1999 return 1; 2000} 2001 2002#ifdef CONFIG_NET_POLL_CONTROLLER 2003static void e100_netpoll(struct net_device *netdev) 2004{ 2005 struct nic *nic = netdev_priv(netdev); 2006 2007 e100_disable_irq(nic); 2008 e100_intr(nic->pdev->irq, netdev); 2009 e100_tx_clean(nic); 2010 e100_enable_irq(nic); 2011} 2012#endif 2013 2014static struct net_device_stats *e100_get_stats(struct net_device *netdev) 2015{ 2016 struct nic *nic = netdev_priv(netdev); 2017 return &nic->net_stats; 2018} 2019 2020static int e100_set_mac_address(struct net_device *netdev, void *p) 2021{ 2022 struct nic *nic = netdev_priv(netdev); 2023 struct sockaddr *addr = p; 2024 2025 if (!is_valid_ether_addr(addr->sa_data)) 2026 return -EADDRNOTAVAIL; 2027 2028 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); 2029 e100_exec_cb(nic, NULL, e100_setup_iaaddr); 2030 2031 return 0; 2032} 2033 2034static int e100_change_mtu(struct net_device *netdev, int new_mtu) 2035{ 2036 if(new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN) 2037 return -EINVAL; 2038 netdev->mtu = new_mtu; 2039 return 0; 2040} 2041 2042static int e100_asf(struct nic *nic) 2043{ 2044 /* ASF can be enabled from eeprom */ 2045 return((nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) && 2046 (nic->eeprom[eeprom_config_asf] & eeprom_asf) && 2047 !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) && 2048 ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE)); 2049} 2050 2051static int e100_up(struct nic *nic) 2052{ 2053 int err; 2054 2055 if((err = e100_rx_alloc_list(nic))) 2056 return err; 2057 if((err = e100_alloc_cbs(nic))) 2058 goto err_rx_clean_list; 2059 if((err = e100_hw_init(nic))) 2060 goto err_clean_cbs; 2061 e100_set_multicast_list(nic->netdev); 2062 e100_start_receiver(nic, NULL); 2063 mod_timer(&nic->watchdog, jiffies); 2064 if((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED, 2065 nic->netdev->name, nic->netdev))) 2066 goto err_no_irq; 2067 netif_wake_queue(nic->netdev); 2068 netif_poll_enable(nic->netdev); 2069 /* enable ints _after_ enabling poll, preventing a race between 2070 * disable ints+schedule */ 2071 e100_enable_irq(nic); 2072 return 0; 2073 2074err_no_irq: 2075 del_timer_sync(&nic->watchdog); 2076err_clean_cbs: 2077 e100_clean_cbs(nic); 2078err_rx_clean_list: 2079 e100_rx_clean_list(nic); 2080 return err; 2081} 2082 2083static void e100_down(struct nic *nic) 2084{ 2085 /* wait here for poll to complete */ 2086 netif_poll_disable(nic->netdev); 2087 netif_stop_queue(nic->netdev); 2088 e100_hw_reset(nic); 2089 free_irq(nic->pdev->irq, nic->netdev); 2090 del_timer_sync(&nic->watchdog); 2091 netif_carrier_off(nic->netdev); 2092 e100_clean_cbs(nic); 2093 e100_rx_clean_list(nic); 2094} 2095 2096static void e100_tx_timeout(struct net_device *netdev) 2097{ 2098 struct nic *nic = netdev_priv(netdev); 2099 2100 /* Reset outside of interrupt context, to avoid request_irq 2101 * in interrupt context */ 2102 schedule_work(&nic->tx_timeout_task); 2103} 2104 2105static void e100_tx_timeout_task(struct net_device *netdev) 2106{ 2107 struct nic *nic = netdev_priv(netdev); 2108 2109 DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n", 2110 readb(&nic->csr->scb.status)); 2111 e100_down(netdev_priv(netdev)); 2112 e100_up(netdev_priv(netdev)); 2113} 2114 2115static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) 2116{ 2117 int err; 2118 struct sk_buff *skb; 2119 2120 /* Use driver resources to perform internal MAC or PHY 2121 * loopback test. A single packet is prepared and transmitted 2122 * in loopback mode, and the test passes if the received 2123 * packet compares byte-for-byte to the transmitted packet. */ 2124 2125 if((err = e100_rx_alloc_list(nic))) 2126 return err; 2127 if((err = e100_alloc_cbs(nic))) 2128 goto err_clean_rx; 2129 2130 /* ICH PHY loopback is broken so do MAC loopback instead */ 2131 if(nic->flags & ich && loopback_mode == lb_phy) 2132 loopback_mode = lb_mac; 2133 2134 nic->loopback = loopback_mode; 2135 if((err = e100_hw_init(nic))) 2136 goto err_loopback_none; 2137 2138 if(loopback_mode == lb_phy) 2139 mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 2140 BMCR_LOOPBACK); 2141 2142 e100_start_receiver(nic, NULL); 2143 2144 if(!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) { 2145 err = -ENOMEM; 2146 goto err_loopback_none; 2147 } 2148 skb_put(skb, ETH_DATA_LEN); 2149 memset(skb->data, 0xFF, ETH_DATA_LEN); 2150 e100_xmit_frame(skb, nic->netdev); 2151 2152 msleep(10); 2153 2154 pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, 2155 RFD_BUF_LEN, PCI_DMA_FROMDEVICE); 2156 2157 if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), 2158 skb->data, ETH_DATA_LEN)) 2159 err = -EAGAIN; 2160 2161err_loopback_none: 2162 mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0); 2163 nic->loopback = lb_none; 2164 e100_clean_cbs(nic); 2165 e100_hw_reset(nic); 2166err_clean_rx: 2167 e100_rx_clean_list(nic); 2168 return err; 2169} 2170 2171#define MII_LED_CONTROL 0x1B 2172static void e100_blink_led(unsigned long data) 2173{ 2174 struct nic *nic = (struct nic *)data; 2175 enum led_state { 2176 led_on = 0x01, 2177 led_off = 0x04, 2178 led_on_559 = 0x05, 2179 led_on_557 = 0x07, 2180 }; 2181 2182 nic->leds = (nic->leds & led_on) ? led_off : 2183 (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559; 2184 mdio_write(nic->netdev, nic->mii.phy_id, MII_LED_CONTROL, nic->leds); 2185 mod_timer(&nic->blink_timer, jiffies + HZ / 4); 2186} 2187 2188static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) 2189{ 2190 struct nic *nic = netdev_priv(netdev); 2191 return mii_ethtool_gset(&nic->mii, cmd); 2192} 2193 2194static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd) 2195{ 2196 struct nic *nic = netdev_priv(netdev); 2197 int err; 2198 2199 mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET); 2200 err = mii_ethtool_sset(&nic->mii, cmd); 2201 e100_exec_cb(nic, NULL, e100_configure); 2202 2203 return err; 2204} 2205 2206static void e100_get_drvinfo(struct net_device *netdev, 2207 struct ethtool_drvinfo *info) 2208{ 2209 struct nic *nic = netdev_priv(netdev); 2210 strcpy(info->driver, DRV_NAME); 2211 strcpy(info->version, DRV_VERSION); 2212 strcpy(info->fw_version, "N/A"); 2213 strcpy(info->bus_info, pci_name(nic->pdev)); 2214} 2215 2216static int e100_get_regs_len(struct net_device *netdev) 2217{ 2218 struct nic *nic = netdev_priv(netdev); 2219#define E100_PHY_REGS 0x1C 2220#define E100_REGS_LEN 1 + E100_PHY_REGS + \ 2221 sizeof(nic->mem->dump_buf) / sizeof(u32) 2222 return E100_REGS_LEN * sizeof(u32); 2223} 2224 2225static void e100_get_regs(struct net_device *netdev, 2226 struct ethtool_regs *regs, void *p) 2227{ 2228 struct nic *nic = netdev_priv(netdev); 2229 u32 *buff = p; 2230 int i; 2231 2232 regs->version = (1 << 24) | nic->rev_id; 2233 buff[0] = readb(&nic->csr->scb.cmd_hi) << 24 | 2234 readb(&nic->csr->scb.cmd_lo) << 16 | 2235 readw(&nic->csr->scb.status); 2236 for(i = E100_PHY_REGS; i >= 0; i--) 2237 buff[1 + E100_PHY_REGS - i] = 2238 mdio_read(netdev, nic->mii.phy_id, i); 2239 memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf)); 2240 e100_exec_cb(nic, NULL, e100_dump); 2241 msleep(10); 2242 memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf, 2243 sizeof(nic->mem->dump_buf)); 2244} 2245 2246static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) 2247{ 2248 struct nic *nic = netdev_priv(netdev); 2249 wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0; 2250 wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0; 2251} 2252 2253static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) 2254{ 2255 struct nic *nic = netdev_priv(netdev); 2256 2257 if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) 2258 return -EOPNOTSUPP; 2259 2260 if(wol->wolopts) 2261 nic->flags |= wol_magic; 2262 else 2263 nic->flags &= ~wol_magic; 2264 2265 e100_exec_cb(nic, NULL, e100_configure); 2266 2267 return 0; 2268} 2269 2270static u32 e100_get_msglevel(struct net_device *netdev) 2271{ 2272 struct nic *nic = netdev_priv(netdev); 2273 return nic->msg_enable; 2274} 2275 2276static void e100_set_msglevel(struct net_device *netdev, u32 value) 2277{ 2278 struct nic *nic = netdev_priv(netdev); 2279 nic->msg_enable = value; 2280} 2281 2282static int e100_nway_reset(struct net_device *netdev) 2283{ 2284 struct nic *nic = netdev_priv(netdev); 2285 return mii_nway_restart(&nic->mii); 2286} 2287 2288static u32 e100_get_link(struct net_device *netdev) 2289{ 2290 struct nic *nic = netdev_priv(netdev); 2291 return mii_link_ok(&nic->mii); 2292} 2293 2294static int e100_get_eeprom_len(struct net_device *netdev) 2295{ 2296 struct nic *nic = netdev_priv(netdev); 2297 return nic->eeprom_wc << 1; 2298} 2299 2300#define E100_EEPROM_MAGIC 0x1234 2301static int e100_get_eeprom(struct net_device *netdev, 2302 struct ethtool_eeprom *eeprom, u8 *bytes) 2303{ 2304 struct nic *nic = netdev_priv(netdev); 2305 2306 eeprom->magic = E100_EEPROM_MAGIC; 2307 memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len); 2308 2309 return 0; 2310} 2311 2312static int e100_set_eeprom(struct net_device *netdev, 2313 struct ethtool_eeprom *eeprom, u8 *bytes) 2314{ 2315 struct nic *nic = netdev_priv(netdev); 2316 2317 if(eeprom->magic != E100_EEPROM_MAGIC) 2318 return -EINVAL; 2319 2320 memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len); 2321 2322 return e100_eeprom_save(nic, eeprom->offset >> 1, 2323 (eeprom->len >> 1) + 1); 2324} 2325 2326static void e100_get_ringparam(struct net_device *netdev, 2327 struct ethtool_ringparam *ring) 2328{ 2329 struct nic *nic = netdev_priv(netdev); 2330 struct param_range *rfds = &nic->params.rfds; 2331 struct param_range *cbs = &nic->params.cbs; 2332 2333 ring->rx_max_pending = rfds->max; 2334 ring->tx_max_pending = cbs->max; 2335 ring->rx_mini_max_pending = 0; 2336 ring->rx_jumbo_max_pending = 0; 2337 ring->rx_pending = rfds->count; 2338 ring->tx_pending = cbs->count; 2339 ring->rx_mini_pending = 0; 2340 ring->rx_jumbo_pending = 0; 2341} 2342 2343static int e100_set_ringparam(struct net_device *netdev, 2344 struct ethtool_ringparam *ring) 2345{ 2346 struct nic *nic = netdev_priv(netdev); 2347 struct param_range *rfds = &nic->params.rfds; 2348 struct param_range *cbs = &nic->params.cbs; 2349 2350 if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) 2351 return -EINVAL; 2352 2353 if(netif_running(netdev)) 2354 e100_down(nic); 2355 rfds->count = max(ring->rx_pending, rfds->min); 2356 rfds->count = min(rfds->count, rfds->max); 2357 cbs->count = max(ring->tx_pending, cbs->min); 2358 cbs->count = min(cbs->count, cbs->max); 2359 DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n", 2360 rfds->count, cbs->count); 2361 if(netif_running(netdev)) 2362 e100_up(nic); 2363 2364 return 0; 2365} 2366 2367static const char e100_gstrings_test[][ETH_GSTRING_LEN] = { 2368 "Link test (on/offline)", 2369 "Eeprom test (on/offline)", 2370 "Self test (offline)", 2371 "Mac loopback (offline)", 2372 "Phy loopback (offline)", 2373}; 2374#define E100_TEST_LEN sizeof(e100_gstrings_test) / ETH_GSTRING_LEN 2375 2376static int e100_diag_test_count(struct net_device *netdev) 2377{ 2378 return E100_TEST_LEN; 2379} 2380 2381static void e100_diag_test(struct net_device *netdev, 2382 struct ethtool_test *test, u64 *data) 2383{ 2384 struct ethtool_cmd cmd; 2385 struct nic *nic = netdev_priv(netdev); 2386 int i, err; 2387 2388 memset(data, 0, E100_TEST_LEN * sizeof(u64)); 2389 data[0] = !mii_link_ok(&nic->mii); 2390 data[1] = e100_eeprom_load(nic); 2391 if(test->flags & ETH_TEST_FL_OFFLINE) { 2392 2393 /* save speed, duplex & autoneg settings */ 2394 err = mii_ethtool_gset(&nic->mii, &cmd); 2395 2396 if(netif_running(netdev)) 2397 e100_down(nic); 2398 data[2] = e100_self_test(nic); 2399 data[3] = e100_loopback_test(nic, lb_mac); 2400 data[4] = e100_loopback_test(nic, lb_phy); 2401 2402 /* restore speed, duplex & autoneg settings */ 2403 err = mii_ethtool_sset(&nic->mii, &cmd); 2404 2405 if(netif_running(netdev)) 2406 e100_up(nic); 2407 } 2408 for(i = 0; i < E100_TEST_LEN; i++) 2409 test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0; 2410 2411 msleep_interruptible(4 * 1000); 2412} 2413 2414static int e100_phys_id(struct net_device *netdev, u32 data) 2415{ 2416 struct nic *nic = netdev_priv(netdev); 2417 2418 if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) 2419 data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); 2420 mod_timer(&nic->blink_timer, jiffies); 2421 msleep_interruptible(data * 1000); 2422 del_timer_sync(&nic->blink_timer); 2423 mdio_write(netdev, nic->mii.phy_id, MII_LED_CONTROL, 0); 2424 2425 return 0; 2426} 2427 2428static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = { 2429 "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors", 2430 "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions", 2431 "rx_length_errors", "rx_over_errors", "rx_crc_errors", 2432 "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors", 2433 "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors", 2434 "tx_heartbeat_errors", "tx_window_errors", 2435 /* device-specific stats */ 2436 "tx_deferred", "tx_single_collisions", "tx_multi_collisions", 2437 "tx_flow_control_pause", "rx_flow_control_pause", 2438 "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets", 2439}; 2440#define E100_NET_STATS_LEN 21 2441#define E100_STATS_LEN sizeof(e100_gstrings_stats) / ETH_GSTRING_LEN 2442 2443static int e100_get_stats_count(struct net_device *netdev) 2444{ 2445 return E100_STATS_LEN; 2446} 2447 2448static void e100_get_ethtool_stats(struct net_device *netdev, 2449 struct ethtool_stats *stats, u64 *data) 2450{ 2451 struct nic *nic = netdev_priv(netdev); 2452 int i; 2453 2454 for(i = 0; i < E100_NET_STATS_LEN; i++) 2455 data[i] = ((unsigned long *)&nic->net_stats)[i]; 2456 2457 data[i++] = nic->tx_deferred; 2458 data[i++] = nic->tx_single_collisions; 2459 data[i++] = nic->tx_multiple_collisions; 2460 data[i++] = nic->tx_fc_pause; 2461 data[i++] = nic->rx_fc_pause; 2462 data[i++] = nic->rx_fc_unsupported; 2463 data[i++] = nic->tx_tco_frames; 2464 data[i++] = nic->rx_tco_frames; 2465} 2466 2467static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data) 2468{ 2469 switch(stringset) { 2470 case ETH_SS_TEST: 2471 memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test)); 2472 break; 2473 case ETH_SS_STATS: 2474 memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats)); 2475 break; 2476 } 2477} 2478 2479static const struct ethtool_ops e100_ethtool_ops = { 2480 .get_settings = e100_get_settings, 2481 .set_settings = e100_set_settings, 2482 .get_drvinfo = e100_get_drvinfo, 2483 .get_regs_len = e100_get_regs_len, 2484 .get_regs = e100_get_regs, 2485 .get_wol = e100_get_wol, 2486 .set_wol = e100_set_wol, 2487 .get_msglevel = e100_get_msglevel, 2488 .set_msglevel = e100_set_msglevel, 2489 .nway_reset = e100_nway_reset, 2490 .get_link = e100_get_link, 2491 .get_eeprom_len = e100_get_eeprom_len, 2492 .get_eeprom = e100_get_eeprom, 2493 .set_eeprom = e100_set_eeprom, 2494 .get_ringparam = e100_get_ringparam, 2495 .set_ringparam = e100_set_ringparam, 2496 .self_test_count = e100_diag_test_count, 2497 .self_test = e100_diag_test, 2498 .get_strings = e100_get_strings, 2499 .phys_id = e100_phys_id, 2500 .get_stats_count = e100_get_stats_count, 2501 .get_ethtool_stats = e100_get_ethtool_stats, 2502 .get_perm_addr = ethtool_op_get_perm_addr, 2503}; 2504 2505static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) 2506{ 2507 struct nic *nic = netdev_priv(netdev); 2508 2509 return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL); 2510} 2511 2512static int e100_alloc(struct nic *nic) 2513{ 2514 nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem), 2515 &nic->dma_addr); 2516 return nic->mem ? 0 : -ENOMEM; 2517} 2518 2519static void e100_free(struct nic *nic) 2520{ 2521 if(nic->mem) { 2522 pci_free_consistent(nic->pdev, sizeof(struct mem), 2523 nic->mem, nic->dma_addr); 2524 nic->mem = NULL; 2525 } 2526} 2527 2528static int e100_open(struct net_device *netdev) 2529{ 2530 struct nic *nic = netdev_priv(netdev); 2531 int err = 0; 2532 2533 netif_carrier_off(netdev); 2534 if((err = e100_up(nic))) 2535 DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n"); 2536 return err; 2537} 2538 2539static int e100_close(struct net_device *netdev) 2540{ 2541 e100_down(netdev_priv(netdev)); 2542 return 0; 2543} 2544 2545static int __devinit e100_probe(struct pci_dev *pdev, 2546 const struct pci_device_id *ent) 2547{ 2548 struct net_device *netdev; 2549 struct nic *nic; 2550 int err; 2551 2552 if(!(netdev = alloc_etherdev(sizeof(struct nic)))) { 2553 if(((1 << debug) - 1) & NETIF_MSG_PROBE) 2554 printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n"); 2555 return -ENOMEM; 2556 } 2557 2558 netdev->open = e100_open; 2559 netdev->stop = e100_close; 2560 netdev->hard_start_xmit = e100_xmit_frame; 2561 netdev->get_stats = e100_get_stats; 2562 netdev->set_multicast_list = e100_set_multicast_list; 2563 netdev->set_mac_address = e100_set_mac_address; 2564 netdev->change_mtu = e100_change_mtu; 2565 netdev->do_ioctl = e100_do_ioctl; 2566 SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops); 2567 netdev->tx_timeout = e100_tx_timeout; 2568 netdev->watchdog_timeo = E100_WATCHDOG_PERIOD; 2569 netdev->poll = e100_poll; 2570 netdev->weight = E100_NAPI_WEIGHT; 2571#ifdef CONFIG_NET_POLL_CONTROLLER 2572 netdev->poll_controller = e100_netpoll; 2573#endif 2574 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); 2575 2576 nic = netdev_priv(netdev); 2577 nic->netdev = netdev; 2578 nic->pdev = pdev; 2579 nic->msg_enable = (1 << debug) - 1; 2580 pci_set_drvdata(pdev, netdev); 2581 2582 if((err = pci_enable_device(pdev))) { 2583 DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n"); 2584 goto err_out_free_dev; 2585 } 2586 2587 if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { 2588 DPRINTK(PROBE, ERR, "Cannot find proper PCI device " 2589 "base address, aborting.\n"); 2590 err = -ENODEV; 2591 goto err_out_disable_pdev; 2592 } 2593 2594 if((err = pci_request_regions(pdev, DRV_NAME))) { 2595 DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n"); 2596 goto err_out_disable_pdev; 2597 } 2598 2599 if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) { 2600 DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n"); 2601 goto err_out_free_res; 2602 } 2603 2604 SET_MODULE_OWNER(netdev); 2605 SET_NETDEV_DEV(netdev, &pdev->dev); 2606 2607 nic->csr = ioremap(pci_resource_start(pdev, 0), sizeof(struct csr)); 2608 if(!nic->csr) { 2609 DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n"); 2610 err = -ENOMEM; 2611 goto err_out_free_res; 2612 } 2613 2614 if(ent->driver_data) 2615 nic->flags |= ich; 2616 else 2617 nic->flags &= ~ich; 2618 2619 e100_get_defaults(nic); 2620 2621 /* locks must be initialized before calling hw_reset */ 2622 spin_lock_init(&nic->cb_lock); 2623 spin_lock_init(&nic->cmd_lock); 2624 spin_lock_init(&nic->mdio_lock); 2625 2626 /* Reset the device before pci_set_master() in case device is in some 2627 * funky state and has an interrupt pending - hint: we don't have the 2628 * interrupt handler registered yet. */ 2629 e100_hw_reset(nic); 2630 2631 pci_set_master(pdev); 2632 2633 init_timer(&nic->watchdog); 2634 nic->watchdog.function = e100_watchdog; 2635 nic->watchdog.data = (unsigned long)nic; 2636 init_timer(&nic->blink_timer); 2637 nic->blink_timer.function = e100_blink_led; 2638 nic->blink_timer.data = (unsigned long)nic; 2639 2640 INIT_WORK(&nic->tx_timeout_task, 2641 (void (*)(void *))e100_tx_timeout_task, netdev); 2642 2643 if((err = e100_alloc(nic))) { 2644 DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n"); 2645 goto err_out_iounmap; 2646 } 2647 2648 if((err = e100_eeprom_load(nic))) 2649 goto err_out_free; 2650 2651 e100_phy_init(nic); 2652 2653 memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); 2654 memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN); 2655 if(!is_valid_ether_addr(netdev->perm_addr)) { 2656 DPRINTK(PROBE, ERR, "Invalid MAC address from " 2657 "EEPROM, aborting.\n"); 2658 err = -EAGAIN; 2659 goto err_out_free; 2660 } 2661 2662 /* Wol magic packet can be enabled from eeprom */ 2663 if((nic->mac >= mac_82558_D101_A4) && 2664 (nic->eeprom[eeprom_id] & eeprom_id_wol)) 2665 nic->flags |= wol_magic; 2666 2667 /* ack any pending wake events, disable PME */ 2668 err = pci_enable_wake(pdev, 0, 0); 2669 if (err) 2670 DPRINTK(PROBE, ERR, "Error clearing wake event\n"); 2671 2672 strcpy(netdev->name, "eth%d"); 2673 if((err = register_netdev(netdev))) { 2674 DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n"); 2675 goto err_out_free; 2676 } 2677 2678 DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, " 2679 "MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n", 2680 (unsigned long long)pci_resource_start(pdev, 0), pdev->irq, 2681 netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2], 2682 netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]); 2683 2684 return 0; 2685 2686err_out_free: 2687 e100_free(nic); 2688err_out_iounmap: 2689 iounmap(nic->csr); 2690err_out_free_res: 2691 pci_release_regions(pdev); 2692err_out_disable_pdev: 2693 pci_disable_device(pdev); 2694err_out_free_dev: 2695 pci_set_drvdata(pdev, NULL); 2696 free_netdev(netdev); 2697 return err; 2698} 2699 2700static void __devexit e100_remove(struct pci_dev *pdev) 2701{ 2702 struct net_device *netdev = pci_get_drvdata(pdev); 2703 2704 if(netdev) { 2705 struct nic *nic = netdev_priv(netdev); 2706 unregister_netdev(netdev); 2707 e100_free(nic); 2708 iounmap(nic->csr); 2709 free_netdev(netdev); 2710 pci_release_regions(pdev); 2711 pci_disable_device(pdev); 2712 pci_set_drvdata(pdev, NULL); 2713 } 2714} 2715 2716#ifdef CONFIG_PM 2717static int e100_suspend(struct pci_dev *pdev, pm_message_t state) 2718{ 2719 struct net_device *netdev = pci_get_drvdata(pdev); 2720 struct nic *nic = netdev_priv(netdev); 2721 2722#ifdef CONFIG_E100_NAPI 2723 if (netif_running(netdev)) 2724 netif_poll_disable(nic->netdev); 2725#endif 2726 del_timer_sync(&nic->watchdog); 2727 netif_carrier_off(nic->netdev); 2728 2729 pci_save_state(pdev); 2730 2731 if ((nic->flags & wol_magic) | e100_asf(nic)) { 2732 pci_enable_wake(pdev, PCI_D3hot, 1); 2733 pci_enable_wake(pdev, PCI_D3cold, 1); 2734 } else { 2735 pci_enable_wake(pdev, PCI_D3hot, 0); 2736 pci_enable_wake(pdev, PCI_D3cold, 0); 2737 } 2738 2739 pci_disable_device(pdev); 2740 pci_set_power_state(pdev, PCI_D3hot); 2741 2742 return 0; 2743} 2744 2745static int e100_resume(struct pci_dev *pdev) 2746{ 2747 struct net_device *netdev = pci_get_drvdata(pdev); 2748 struct nic *nic = netdev_priv(netdev); 2749 2750 pci_set_power_state(pdev, PCI_D0); 2751 pci_restore_state(pdev); 2752 /* ack any pending wake events, disable PME */ 2753 pci_enable_wake(pdev, 0, 0); 2754 2755 netif_device_attach(netdev); 2756 if (netif_running(netdev)) 2757 e100_up(nic); 2758 2759 return 0; 2760} 2761#endif /* CONFIG_PM */ 2762 2763 2764static void e100_shutdown(struct pci_dev *pdev) 2765{ 2766 struct net_device *netdev = pci_get_drvdata(pdev); 2767 struct nic *nic = netdev_priv(netdev); 2768 2769#ifdef CONFIG_E100_NAPI 2770 if (netif_running(netdev)) 2771 netif_poll_disable(nic->netdev); 2772#endif 2773 del_timer_sync(&nic->watchdog); 2774 netif_carrier_off(nic->netdev); 2775 2776 if ((nic->flags & wol_magic) | e100_asf(nic)) { 2777 pci_enable_wake(pdev, PCI_D3hot, 1); 2778 pci_enable_wake(pdev, PCI_D3cold, 1); 2779 } else { 2780 pci_enable_wake(pdev, PCI_D3hot, 0); 2781 pci_enable_wake(pdev, PCI_D3cold, 0); 2782 } 2783 2784 pci_disable_device(pdev); 2785 pci_set_power_state(pdev, PCI_D3hot); 2786} 2787 2788/* ------------------ PCI Error Recovery infrastructure -------------- */ 2789/** 2790 * e100_io_error_detected - called when PCI error is detected. 2791 * @pdev: Pointer to PCI device 2792 * @state: The current pci conneection state 2793 */ 2794static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) 2795{ 2796 struct net_device *netdev = pci_get_drvdata(pdev); 2797 2798 /* Similar to calling e100_down(), but avoids adpater I/O. */ 2799 netdev->stop(netdev); 2800 2801 /* Detach; put netif into state similar to hotplug unplug. */ 2802 netif_poll_enable(netdev); 2803 netif_device_detach(netdev); 2804 pci_disable_device(pdev); 2805 2806 /* Request a slot reset. */ 2807 return PCI_ERS_RESULT_NEED_RESET; 2808} 2809 2810/** 2811 * e100_io_slot_reset - called after the pci bus has been reset. 2812 * @pdev: Pointer to PCI device 2813 * 2814 * Restart the card from scratch. 2815 */ 2816static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev) 2817{ 2818 struct net_device *netdev = pci_get_drvdata(pdev); 2819 struct nic *nic = netdev_priv(netdev); 2820 2821 if (pci_enable_device(pdev)) { 2822 printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n"); 2823 return PCI_ERS_RESULT_DISCONNECT; 2824 } 2825 pci_set_master(pdev); 2826 2827 /* Only one device per card can do a reset */ 2828 if (0 != PCI_FUNC(pdev->devfn)) 2829 return PCI_ERS_RESULT_RECOVERED; 2830 e100_hw_reset(nic); 2831 e100_phy_init(nic); 2832 2833 return PCI_ERS_RESULT_RECOVERED; 2834} 2835 2836/** 2837 * e100_io_resume - resume normal operations 2838 * @pdev: Pointer to PCI device 2839 * 2840 * Resume normal operations after an error recovery 2841 * sequence has been completed. 2842 */ 2843static void e100_io_resume(struct pci_dev *pdev) 2844{ 2845 struct net_device *netdev = pci_get_drvdata(pdev); 2846 struct nic *nic = netdev_priv(netdev); 2847 2848 /* ack any pending wake events, disable PME */ 2849 pci_enable_wake(pdev, 0, 0); 2850 2851 netif_device_attach(netdev); 2852 if (netif_running(netdev)) { 2853 e100_open(netdev); 2854 mod_timer(&nic->watchdog, jiffies); 2855 } 2856} 2857 2858static struct pci_error_handlers e100_err_handler = { 2859 .error_detected = e100_io_error_detected, 2860 .slot_reset = e100_io_slot_reset, 2861 .resume = e100_io_resume, 2862}; 2863 2864static struct pci_driver e100_driver = { 2865 .name = DRV_NAME, 2866 .id_table = e100_id_table, 2867 .probe = e100_probe, 2868 .remove = __devexit_p(e100_remove), 2869#ifdef CONFIG_PM 2870 /* Power Management hooks */ 2871 .suspend = e100_suspend, 2872 .resume = e100_resume, 2873#endif 2874 .shutdown = e100_shutdown, 2875 .err_handler = &e100_err_handler, 2876}; 2877 2878static int __init e100_init_module(void) 2879{ 2880 if(((1 << debug) - 1) & NETIF_MSG_DRV) { 2881 printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION); 2882 printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT); 2883 } 2884 return pci_register_driver(&e100_driver); 2885} 2886 2887static void __exit e100_cleanup_module(void) 2888{ 2889 pci_unregister_driver(&e100_driver); 2890} 2891 2892module_init(e100_init_module); 2893module_exit(e100_cleanup_module);