Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
at v2.6.18-rc6 1459 lines 47 kB view raw
1/* yellowfin.c: A Packet Engines G-NIC ethernet driver for linux. */ 2/* 3 Written 1997-2001 by Donald Becker. 4 5 This software may be used and distributed according to the terms of 6 the GNU General Public License (GPL), incorporated herein by reference. 7 Drivers based on or derived from this code fall under the GPL and must 8 retain the authorship, copyright and license notice. This file is not 9 a complete program and may only be used when the entire operating 10 system is licensed under the GPL. 11 12 This driver is for the Packet Engines G-NIC PCI Gigabit Ethernet adapter. 13 It also supports the Symbios Logic version of the same chip core. 14 15 The author may be reached as becker@scyld.com, or C/O 16 Scyld Computing Corporation 17 410 Severn Ave., Suite 210 18 Annapolis MD 21403 19 20 Support and updates available at 21 http://www.scyld.com/network/yellowfin.html 22 [link no longer provides useful info -jgarzik] 23 24*/ 25 26#define DRV_NAME "yellowfin" 27#define DRV_VERSION "2.0" 28#define DRV_RELDATE "Jun 27, 2006" 29 30#define PFX DRV_NAME ": " 31 32/* The user-configurable values. 33 These may be modified when a driver module is loaded.*/ 34 35static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ 36/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ 37static int max_interrupt_work = 20; 38static int mtu; 39#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */ 40/* System-wide count of bogus-rx frames. */ 41static int bogus_rx; 42static int dma_ctrl = 0x004A0263; /* Constrained by errata */ 43static int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */ 44#elif defined(YF_NEW) /* A future perfect board :->. */ 45static int dma_ctrl = 0x00CAC277; /* Override when loading module! */ 46static int fifo_cfg = 0x0028; 47#else 48static const int dma_ctrl = 0x004A0263; /* Constrained by errata */ 49static const int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */ 50#endif 51 52/* Set the copy breakpoint for the copy-only-tiny-frames scheme. 53 Setting to > 1514 effectively disables this feature. */ 54static int rx_copybreak; 55 56/* Used to pass the media type, etc. 57 No media types are currently defined. These exist for driver 58 interoperability. 59*/ 60#define MAX_UNITS 8 /* More are supported, limit only on options */ 61static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; 62static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; 63 64/* Do ugly workaround for GX server chipset errata. */ 65static int gx_fix; 66 67/* Operational parameters that are set at compile time. */ 68 69/* Keep the ring sizes a power of two for efficiency. 70 Making the Tx ring too long decreases the effectiveness of channel 71 bonding and packet priority. 72 There are no ill effects from too-large receive rings. */ 73#define TX_RING_SIZE 16 74#define TX_QUEUE_SIZE 12 /* Must be > 4 && <= TX_RING_SIZE */ 75#define RX_RING_SIZE 64 76#define STATUS_TOTAL_SIZE TX_RING_SIZE*sizeof(struct tx_status_words) 77#define TX_TOTAL_SIZE 2*TX_RING_SIZE*sizeof(struct yellowfin_desc) 78#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct yellowfin_desc) 79 80/* Operational parameters that usually are not changed. */ 81/* Time in jiffies before concluding the transmitter is hung. */ 82#define TX_TIMEOUT (2*HZ) 83#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ 84 85#define yellowfin_debug debug 86 87#include <linux/module.h> 88#include <linux/kernel.h> 89#include <linux/string.h> 90#include <linux/timer.h> 91#include <linux/errno.h> 92#include <linux/ioport.h> 93#include <linux/slab.h> 94#include <linux/interrupt.h> 95#include <linux/pci.h> 96#include <linux/init.h> 97#include <linux/mii.h> 98#include <linux/netdevice.h> 99#include <linux/etherdevice.h> 100#include <linux/skbuff.h> 101#include <linux/ethtool.h> 102#include <linux/crc32.h> 103#include <linux/bitops.h> 104#include <asm/uaccess.h> 105#include <asm/processor.h> /* Processor type for cache alignment. */ 106#include <asm/unaligned.h> 107#include <asm/io.h> 108 109/* These identify the driver base version and may not be removed. */ 110static char version[] __devinitdata = 111KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n" 112KERN_INFO " http://www.scyld.com/network/yellowfin.html\n" 113KERN_INFO " (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n"; 114 115MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); 116MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver"); 117MODULE_LICENSE("GPL"); 118 119module_param(max_interrupt_work, int, 0); 120module_param(mtu, int, 0); 121module_param(debug, int, 0); 122module_param(rx_copybreak, int, 0); 123module_param_array(options, int, NULL, 0); 124module_param_array(full_duplex, int, NULL, 0); 125module_param(gx_fix, int, 0); 126MODULE_PARM_DESC(max_interrupt_work, "G-NIC maximum events handled per interrupt"); 127MODULE_PARM_DESC(mtu, "G-NIC MTU (all boards)"); 128MODULE_PARM_DESC(debug, "G-NIC debug level (0-7)"); 129MODULE_PARM_DESC(rx_copybreak, "G-NIC copy breakpoint for copy-only-tiny-frames"); 130MODULE_PARM_DESC(options, "G-NIC: Bits 0-3: media type, bit 17: full duplex"); 131MODULE_PARM_DESC(full_duplex, "G-NIC full duplex setting(s) (1)"); 132MODULE_PARM_DESC(gx_fix, "G-NIC: enable GX server chipset bug workaround (0-1)"); 133 134/* 135 Theory of Operation 136 137I. Board Compatibility 138 139This device driver is designed for the Packet Engines "Yellowfin" Gigabit 140Ethernet adapter. The G-NIC 64-bit PCI card is supported, as well as the 141Symbios 53C885E dual function chip. 142 143II. Board-specific settings 144 145PCI bus devices are configured by the system at boot time, so no jumpers 146need to be set on the board. The system BIOS preferably should assign the 147PCI INTA signal to an otherwise unused system IRQ line. 148Note: Kernel versions earlier than 1.3.73 do not support shared PCI 149interrupt lines. 150 151III. Driver operation 152 153IIIa. Ring buffers 154 155The Yellowfin uses the Descriptor Based DMA Architecture specified by Apple. 156This is a descriptor list scheme similar to that used by the EEPro100 and 157Tulip. This driver uses two statically allocated fixed-size descriptor lists 158formed into rings by a branch from the final descriptor to the beginning of 159the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. 160 161The driver allocates full frame size skbuffs for the Rx ring buffers at 162open() time and passes the skb->data field to the Yellowfin as receive data 163buffers. When an incoming frame is less than RX_COPYBREAK bytes long, 164a fresh skbuff is allocated and the frame is copied to the new skbuff. 165When the incoming frame is larger, the skbuff is passed directly up the 166protocol stack and replaced by a newly allocated skbuff. 167 168The RX_COPYBREAK value is chosen to trade-off the memory wasted by 169using a full-sized skbuff for small frames vs. the copying costs of larger 170frames. For small frames the copying cost is negligible (esp. considering 171that we are pre-loading the cache with immediately useful header 172information). For large frames the copying cost is non-trivial, and the 173larger copy might flush the cache of useful data. 174 175IIIC. Synchronization 176 177The driver runs as two independent, single-threaded flows of control. One 178is the send-packet routine, which enforces single-threaded use by the 179dev->tbusy flag. The other thread is the interrupt handler, which is single 180threaded by the hardware and other software. 181 182The send packet thread has partial control over the Tx ring and 'dev->tbusy' 183flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next 184queue slot is empty, it clears the tbusy flag when finished otherwise it sets 185the 'yp->tx_full' flag. 186 187The interrupt handler has exclusive control over the Rx ring and records stats 188from the Tx ring. After reaping the stats, it marks the Tx queue entry as 189empty by incrementing the dirty_tx mark. Iff the 'yp->tx_full' flag is set, it 190clears both the tx_full and tbusy flags. 191 192IV. Notes 193 194Thanks to Kim Stearns of Packet Engines for providing a pair of G-NIC boards. 195Thanks to Bruce Faust of Digitalscape for providing both their SYM53C885 board 196and an AlphaStation to verifty the Alpha port! 197 198IVb. References 199 200Yellowfin Engineering Design Specification, 4/23/97 Preliminary/Confidential 201Symbios SYM53C885 PCI-SCSI/Fast Ethernet Multifunction Controller Preliminary 202 Data Manual v3.0 203http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html 204http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html 205 206IVc. Errata 207 208See Packet Engines confidential appendix (prototype chips only). 209*/ 210 211 212 213enum capability_flags { 214 HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16, 215 HasMACAddrBug=32, /* Only on early revs. */ 216 DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */ 217}; 218 219/* The PCI I/O space extent. */ 220enum { 221 YELLOWFIN_SIZE = 0x100, 222}; 223 224struct pci_id_info { 225 const char *name; 226 struct match_info { 227 int pci, pci_mask, subsystem, subsystem_mask; 228 int revision, revision_mask; /* Only 8 bits. */ 229 } id; 230 int drv_flags; /* Driver use, intended as capability flags. */ 231}; 232 233static const struct pci_id_info pci_id_tbl[] = { 234 {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff}, 235 FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom}, 236 {"Symbios SYM83C885", { 0x07011000, 0xffffffff}, 237 HasMII | DontUseEeprom }, 238 { } 239}; 240 241static const struct pci_device_id yellowfin_pci_tbl[] = { 242 { 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, 243 { 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, 244 { } 245}; 246MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl); 247 248 249/* Offsets to the Yellowfin registers. Various sizes and alignments. */ 250enum yellowfin_offsets { 251 TxCtrl=0x00, TxStatus=0x04, TxPtr=0x0C, 252 TxIntrSel=0x10, TxBranchSel=0x14, TxWaitSel=0x18, 253 RxCtrl=0x40, RxStatus=0x44, RxPtr=0x4C, 254 RxIntrSel=0x50, RxBranchSel=0x54, RxWaitSel=0x58, 255 EventStatus=0x80, IntrEnb=0x82, IntrClear=0x84, IntrStatus=0x86, 256 ChipRev=0x8C, DMACtrl=0x90, TxThreshold=0x94, 257 Cnfg=0xA0, FrameGap0=0xA2, FrameGap1=0xA4, 258 MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC, 259 MII_Status=0xAE, 260 RxDepth=0xB8, FlowCtrl=0xBC, 261 AddrMode=0xD0, StnAddr=0xD2, HashTbl=0xD8, FIFOcfg=0xF8, 262 EEStatus=0xF0, EECtrl=0xF1, EEAddr=0xF2, EERead=0xF3, EEWrite=0xF4, 263 EEFeature=0xF5, 264}; 265 266/* The Yellowfin Rx and Tx buffer descriptors. 267 Elements are written as 32 bit for endian portability. */ 268struct yellowfin_desc { 269 u32 dbdma_cmd; 270 u32 addr; 271 u32 branch_addr; 272 u32 result_status; 273}; 274 275struct tx_status_words { 276#ifdef __BIG_ENDIAN 277 u16 tx_errs; 278 u16 tx_cnt; 279 u16 paused; 280 u16 total_tx_cnt; 281#else /* Little endian chips. */ 282 u16 tx_cnt; 283 u16 tx_errs; 284 u16 total_tx_cnt; 285 u16 paused; 286#endif /* __BIG_ENDIAN */ 287}; 288 289/* Bits in yellowfin_desc.cmd */ 290enum desc_cmd_bits { 291 CMD_TX_PKT=0x10000000, CMD_RX_BUF=0x20000000, CMD_TXSTATUS=0x30000000, 292 CMD_NOP=0x60000000, CMD_STOP=0x70000000, 293 BRANCH_ALWAYS=0x0C0000, INTR_ALWAYS=0x300000, WAIT_ALWAYS=0x030000, 294 BRANCH_IFTRUE=0x040000, 295}; 296 297/* Bits in yellowfin_desc.status */ 298enum desc_status_bits { RX_EOP=0x0040, }; 299 300/* Bits in the interrupt status/mask registers. */ 301enum intr_status_bits { 302 IntrRxDone=0x01, IntrRxInvalid=0x02, IntrRxPCIFault=0x04,IntrRxPCIErr=0x08, 303 IntrTxDone=0x10, IntrTxInvalid=0x20, IntrTxPCIFault=0x40,IntrTxPCIErr=0x80, 304 IntrEarlyRx=0x100, IntrWakeup=0x200, }; 305 306#define PRIV_ALIGN 31 /* Required alignment mask */ 307#define MII_CNT 4 308struct yellowfin_private { 309 /* Descriptor rings first for alignment. 310 Tx requires a second descriptor for status. */ 311 struct yellowfin_desc *rx_ring; 312 struct yellowfin_desc *tx_ring; 313 struct sk_buff* rx_skbuff[RX_RING_SIZE]; 314 struct sk_buff* tx_skbuff[TX_RING_SIZE]; 315 dma_addr_t rx_ring_dma; 316 dma_addr_t tx_ring_dma; 317 318 struct tx_status_words *tx_status; 319 dma_addr_t tx_status_dma; 320 321 struct timer_list timer; /* Media selection timer. */ 322 struct net_device_stats stats; 323 /* Frequently used and paired value: keep adjacent for cache effect. */ 324 int chip_id, drv_flags; 325 struct pci_dev *pci_dev; 326 unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ 327 unsigned int rx_buf_sz; /* Based on MTU+slack. */ 328 struct tx_status_words *tx_tail_desc; 329 unsigned int cur_tx, dirty_tx; 330 int tx_threshold; 331 unsigned int tx_full:1; /* The Tx queue is full. */ 332 unsigned int full_duplex:1; /* Full-duplex operation requested. */ 333 unsigned int duplex_lock:1; 334 unsigned int medialock:1; /* Do not sense media. */ 335 unsigned int default_port:4; /* Last dev->if_port value. */ 336 /* MII transceiver section. */ 337 int mii_cnt; /* MII device addresses. */ 338 u16 advertising; /* NWay media advertisement */ 339 unsigned char phys[MII_CNT]; /* MII device addresses, only first one used */ 340 spinlock_t lock; 341 void __iomem *base; 342}; 343 344static int read_eeprom(void __iomem *ioaddr, int location); 345static int mdio_read(void __iomem *ioaddr, int phy_id, int location); 346static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value); 347static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 348static int yellowfin_open(struct net_device *dev); 349static void yellowfin_timer(unsigned long data); 350static void yellowfin_tx_timeout(struct net_device *dev); 351static void yellowfin_init_ring(struct net_device *dev); 352static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev); 353static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance, struct pt_regs *regs); 354static int yellowfin_rx(struct net_device *dev); 355static void yellowfin_error(struct net_device *dev, int intr_status); 356static int yellowfin_close(struct net_device *dev); 357static struct net_device_stats *yellowfin_get_stats(struct net_device *dev); 358static void set_rx_mode(struct net_device *dev); 359static struct ethtool_ops ethtool_ops; 360 361 362static int __devinit yellowfin_init_one(struct pci_dev *pdev, 363 const struct pci_device_id *ent) 364{ 365 struct net_device *dev; 366 struct yellowfin_private *np; 367 int irq; 368 int chip_idx = ent->driver_data; 369 static int find_cnt; 370 void __iomem *ioaddr; 371 int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; 372 int drv_flags = pci_id_tbl[chip_idx].drv_flags; 373 void *ring_space; 374 dma_addr_t ring_dma; 375#ifdef USE_IO_OPS 376 int bar = 0; 377#else 378 int bar = 1; 379#endif 380 381/* when built into the kernel, we only print version if device is found */ 382#ifndef MODULE 383 static int printed_version; 384 if (!printed_version++) 385 printk(version); 386#endif 387 388 i = pci_enable_device(pdev); 389 if (i) return i; 390 391 dev = alloc_etherdev(sizeof(*np)); 392 if (!dev) { 393 printk (KERN_ERR PFX "cannot allocate ethernet device\n"); 394 return -ENOMEM; 395 } 396 SET_MODULE_OWNER(dev); 397 SET_NETDEV_DEV(dev, &pdev->dev); 398 399 np = netdev_priv(dev); 400 401 if (pci_request_regions(pdev, DRV_NAME)) 402 goto err_out_free_netdev; 403 404 pci_set_master (pdev); 405 406 ioaddr = pci_iomap(pdev, bar, YELLOWFIN_SIZE); 407 if (!ioaddr) 408 goto err_out_free_res; 409 410 irq = pdev->irq; 411 412 if (drv_flags & DontUseEeprom) 413 for (i = 0; i < 6; i++) 414 dev->dev_addr[i] = ioread8(ioaddr + StnAddr + i); 415 else { 416 int ee_offset = (read_eeprom(ioaddr, 6) == 0xff ? 0x100 : 0); 417 for (i = 0; i < 6; i++) 418 dev->dev_addr[i] = read_eeprom(ioaddr, ee_offset + i); 419 } 420 421 /* Reset the chip. */ 422 iowrite32(0x80000000, ioaddr + DMACtrl); 423 424 dev->base_addr = (unsigned long)ioaddr; 425 dev->irq = irq; 426 427 pci_set_drvdata(pdev, dev); 428 spin_lock_init(&np->lock); 429 430 np->pci_dev = pdev; 431 np->chip_id = chip_idx; 432 np->drv_flags = drv_flags; 433 np->base = ioaddr; 434 435 ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma); 436 if (!ring_space) 437 goto err_out_cleardev; 438 np->tx_ring = (struct yellowfin_desc *)ring_space; 439 np->tx_ring_dma = ring_dma; 440 441 ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma); 442 if (!ring_space) 443 goto err_out_unmap_tx; 444 np->rx_ring = (struct yellowfin_desc *)ring_space; 445 np->rx_ring_dma = ring_dma; 446 447 ring_space = pci_alloc_consistent(pdev, STATUS_TOTAL_SIZE, &ring_dma); 448 if (!ring_space) 449 goto err_out_unmap_rx; 450 np->tx_status = (struct tx_status_words *)ring_space; 451 np->tx_status_dma = ring_dma; 452 453 if (dev->mem_start) 454 option = dev->mem_start; 455 456 /* The lower four bits are the media type. */ 457 if (option > 0) { 458 if (option & 0x200) 459 np->full_duplex = 1; 460 np->default_port = option & 15; 461 if (np->default_port) 462 np->medialock = 1; 463 } 464 if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0) 465 np->full_duplex = 1; 466 467 if (np->full_duplex) 468 np->duplex_lock = 1; 469 470 /* The Yellowfin-specific entries in the device structure. */ 471 dev->open = &yellowfin_open; 472 dev->hard_start_xmit = &yellowfin_start_xmit; 473 dev->stop = &yellowfin_close; 474 dev->get_stats = &yellowfin_get_stats; 475 dev->set_multicast_list = &set_rx_mode; 476 dev->do_ioctl = &netdev_ioctl; 477 SET_ETHTOOL_OPS(dev, &ethtool_ops); 478 dev->tx_timeout = yellowfin_tx_timeout; 479 dev->watchdog_timeo = TX_TIMEOUT; 480 481 if (mtu) 482 dev->mtu = mtu; 483 484 i = register_netdev(dev); 485 if (i) 486 goto err_out_unmap_status; 487 488 printk(KERN_INFO "%s: %s type %8x at %p, ", 489 dev->name, pci_id_tbl[chip_idx].name, 490 ioread32(ioaddr + ChipRev), ioaddr); 491 for (i = 0; i < 5; i++) 492 printk("%2.2x:", dev->dev_addr[i]); 493 printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq); 494 495 if (np->drv_flags & HasMII) { 496 int phy, phy_idx = 0; 497 for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) { 498 int mii_status = mdio_read(ioaddr, phy, 1); 499 if (mii_status != 0xffff && mii_status != 0x0000) { 500 np->phys[phy_idx++] = phy; 501 np->advertising = mdio_read(ioaddr, phy, 4); 502 printk(KERN_INFO "%s: MII PHY found at address %d, status " 503 "0x%4.4x advertising %4.4x.\n", 504 dev->name, phy, mii_status, np->advertising); 505 } 506 } 507 np->mii_cnt = phy_idx; 508 } 509 510 find_cnt++; 511 512 return 0; 513 514err_out_unmap_status: 515 pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status, 516 np->tx_status_dma); 517err_out_unmap_rx: 518 pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma); 519err_out_unmap_tx: 520 pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma); 521err_out_cleardev: 522 pci_set_drvdata(pdev, NULL); 523 pci_iounmap(pdev, ioaddr); 524err_out_free_res: 525 pci_release_regions(pdev); 526err_out_free_netdev: 527 free_netdev (dev); 528 return -ENODEV; 529} 530 531static int __devinit read_eeprom(void __iomem *ioaddr, int location) 532{ 533 int bogus_cnt = 10000; /* Typical 33Mhz: 1050 ticks */ 534 535 iowrite8(location, ioaddr + EEAddr); 536 iowrite8(0x30 | ((location >> 8) & 7), ioaddr + EECtrl); 537 while ((ioread8(ioaddr + EEStatus) & 0x80) && --bogus_cnt > 0) 538 ; 539 return ioread8(ioaddr + EERead); 540} 541 542/* MII Managemen Data I/O accesses. 543 These routines assume the MDIO controller is idle, and do not exit until 544 the command is finished. */ 545 546static int mdio_read(void __iomem *ioaddr, int phy_id, int location) 547{ 548 int i; 549 550 iowrite16((phy_id<<8) + location, ioaddr + MII_Addr); 551 iowrite16(1, ioaddr + MII_Cmd); 552 for (i = 10000; i >= 0; i--) 553 if ((ioread16(ioaddr + MII_Status) & 1) == 0) 554 break; 555 return ioread16(ioaddr + MII_Rd_Data); 556} 557 558static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value) 559{ 560 int i; 561 562 iowrite16((phy_id<<8) + location, ioaddr + MII_Addr); 563 iowrite16(value, ioaddr + MII_Wr_Data); 564 565 /* Wait for the command to finish. */ 566 for (i = 10000; i >= 0; i--) 567 if ((ioread16(ioaddr + MII_Status) & 1) == 0) 568 break; 569 return; 570} 571 572 573static int yellowfin_open(struct net_device *dev) 574{ 575 struct yellowfin_private *yp = netdev_priv(dev); 576 void __iomem *ioaddr = yp->base; 577 int i; 578 579 /* Reset the chip. */ 580 iowrite32(0x80000000, ioaddr + DMACtrl); 581 582 i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev); 583 if (i) return i; 584 585 if (yellowfin_debug > 1) 586 printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n", 587 dev->name, dev->irq); 588 589 yellowfin_init_ring(dev); 590 591 iowrite32(yp->rx_ring_dma, ioaddr + RxPtr); 592 iowrite32(yp->tx_ring_dma, ioaddr + TxPtr); 593 594 for (i = 0; i < 6; i++) 595 iowrite8(dev->dev_addr[i], ioaddr + StnAddr + i); 596 597 /* Set up various condition 'select' registers. 598 There are no options here. */ 599 iowrite32(0x00800080, ioaddr + TxIntrSel); /* Interrupt on Tx abort */ 600 iowrite32(0x00800080, ioaddr + TxBranchSel); /* Branch on Tx abort */ 601 iowrite32(0x00400040, ioaddr + TxWaitSel); /* Wait on Tx status */ 602 iowrite32(0x00400040, ioaddr + RxIntrSel); /* Interrupt on Rx done */ 603 iowrite32(0x00400040, ioaddr + RxBranchSel); /* Branch on Rx error */ 604 iowrite32(0x00400040, ioaddr + RxWaitSel); /* Wait on Rx done */ 605 606 /* Initialize other registers: with so many this eventually this will 607 converted to an offset/value list. */ 608 iowrite32(dma_ctrl, ioaddr + DMACtrl); 609 iowrite16(fifo_cfg, ioaddr + FIFOcfg); 610 /* Enable automatic generation of flow control frames, period 0xffff. */ 611 iowrite32(0x0030FFFF, ioaddr + FlowCtrl); 612 613 yp->tx_threshold = 32; 614 iowrite32(yp->tx_threshold, ioaddr + TxThreshold); 615 616 if (dev->if_port == 0) 617 dev->if_port = yp->default_port; 618 619 netif_start_queue(dev); 620 621 /* Setting the Rx mode will start the Rx process. */ 622 if (yp->drv_flags & IsGigabit) { 623 /* We are always in full-duplex mode with gigabit! */ 624 yp->full_duplex = 1; 625 iowrite16(0x01CF, ioaddr + Cnfg); 626 } else { 627 iowrite16(0x0018, ioaddr + FrameGap0); /* 0060/4060 for non-MII 10baseT */ 628 iowrite16(0x1018, ioaddr + FrameGap1); 629 iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg); 630 } 631 set_rx_mode(dev); 632 633 /* Enable interrupts by setting the interrupt mask. */ 634 iowrite16(0x81ff, ioaddr + IntrEnb); /* See enum intr_status_bits */ 635 iowrite16(0x0000, ioaddr + EventStatus); /* Clear non-interrupting events */ 636 iowrite32(0x80008000, ioaddr + RxCtrl); /* Start Rx and Tx channels. */ 637 iowrite32(0x80008000, ioaddr + TxCtrl); 638 639 if (yellowfin_debug > 2) { 640 printk(KERN_DEBUG "%s: Done yellowfin_open().\n", 641 dev->name); 642 } 643 644 /* Set the timer to check for link beat. */ 645 init_timer(&yp->timer); 646 yp->timer.expires = jiffies + 3*HZ; 647 yp->timer.data = (unsigned long)dev; 648 yp->timer.function = &yellowfin_timer; /* timer handler */ 649 add_timer(&yp->timer); 650 651 return 0; 652} 653 654static void yellowfin_timer(unsigned long data) 655{ 656 struct net_device *dev = (struct net_device *)data; 657 struct yellowfin_private *yp = netdev_priv(dev); 658 void __iomem *ioaddr = yp->base; 659 int next_tick = 60*HZ; 660 661 if (yellowfin_debug > 3) { 662 printk(KERN_DEBUG "%s: Yellowfin timer tick, status %8.8x.\n", 663 dev->name, ioread16(ioaddr + IntrStatus)); 664 } 665 666 if (yp->mii_cnt) { 667 int bmsr = mdio_read(ioaddr, yp->phys[0], MII_BMSR); 668 int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA); 669 int negotiated = lpa & yp->advertising; 670 if (yellowfin_debug > 1) 671 printk(KERN_DEBUG "%s: MII #%d status register is %4.4x, " 672 "link partner capability %4.4x.\n", 673 dev->name, yp->phys[0], bmsr, lpa); 674 675 yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated); 676 677 iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg); 678 679 if (bmsr & BMSR_LSTATUS) 680 next_tick = 60*HZ; 681 else 682 next_tick = 3*HZ; 683 } 684 685 yp->timer.expires = jiffies + next_tick; 686 add_timer(&yp->timer); 687} 688 689static void yellowfin_tx_timeout(struct net_device *dev) 690{ 691 struct yellowfin_private *yp = netdev_priv(dev); 692 void __iomem *ioaddr = yp->base; 693 694 printk(KERN_WARNING "%s: Yellowfin transmit timed out at %d/%d Tx " 695 "status %4.4x, Rx status %4.4x, resetting...\n", 696 dev->name, yp->cur_tx, yp->dirty_tx, 697 ioread32(ioaddr + TxStatus), ioread32(ioaddr + RxStatus)); 698 699 /* Note: these should be KERN_DEBUG. */ 700 if (yellowfin_debug) { 701 int i; 702 printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring); 703 for (i = 0; i < RX_RING_SIZE; i++) 704 printk(" %8.8x", yp->rx_ring[i].result_status); 705 printk("\n"KERN_WARNING" Tx ring %p: ", yp->tx_ring); 706 for (i = 0; i < TX_RING_SIZE; i++) 707 printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs, 708 yp->tx_ring[i].result_status); 709 printk("\n"); 710 } 711 712 /* If the hardware is found to hang regularly, we will update the code 713 to reinitialize the chip here. */ 714 dev->if_port = 0; 715 716 /* Wake the potentially-idle transmit channel. */ 717 iowrite32(0x10001000, yp->base + TxCtrl); 718 if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE) 719 netif_wake_queue (dev); /* Typical path */ 720 721 dev->trans_start = jiffies; 722 yp->stats.tx_errors++; 723} 724 725/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ 726static void yellowfin_init_ring(struct net_device *dev) 727{ 728 struct yellowfin_private *yp = netdev_priv(dev); 729 int i; 730 731 yp->tx_full = 0; 732 yp->cur_rx = yp->cur_tx = 0; 733 yp->dirty_tx = 0; 734 735 yp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); 736 737 for (i = 0; i < RX_RING_SIZE; i++) { 738 yp->rx_ring[i].dbdma_cmd = 739 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz); 740 yp->rx_ring[i].branch_addr = cpu_to_le32(yp->rx_ring_dma + 741 ((i+1)%RX_RING_SIZE)*sizeof(struct yellowfin_desc)); 742 } 743 744 for (i = 0; i < RX_RING_SIZE; i++) { 745 struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz); 746 yp->rx_skbuff[i] = skb; 747 if (skb == NULL) 748 break; 749 skb->dev = dev; /* Mark as being used by this device. */ 750 skb_reserve(skb, 2); /* 16 byte align the IP header. */ 751 yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev, 752 skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE)); 753 } 754 yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP); 755 yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); 756 757#define NO_TXSTATS 758#ifdef NO_TXSTATS 759 /* In this mode the Tx ring needs only a single descriptor. */ 760 for (i = 0; i < TX_RING_SIZE; i++) { 761 yp->tx_skbuff[i] = NULL; 762 yp->tx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP); 763 yp->tx_ring[i].branch_addr = cpu_to_le32(yp->tx_ring_dma + 764 ((i+1)%TX_RING_SIZE)*sizeof(struct yellowfin_desc)); 765 } 766 /* Wrap ring */ 767 yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS); 768#else 769{ 770 int j; 771 772 /* Tx ring needs a pair of descriptors, the second for the status. */ 773 for (i = 0; i < TX_RING_SIZE; i++) { 774 j = 2*i; 775 yp->tx_skbuff[i] = 0; 776 /* Branch on Tx error. */ 777 yp->tx_ring[j].dbdma_cmd = cpu_to_le32(CMD_STOP); 778 yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma + 779 (j+1)*sizeof(struct yellowfin_desc); 780 j++; 781 if (yp->flags & FullTxStatus) { 782 yp->tx_ring[j].dbdma_cmd = 783 cpu_to_le32(CMD_TXSTATUS | sizeof(*yp->tx_status)); 784 yp->tx_ring[j].request_cnt = sizeof(*yp->tx_status); 785 yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma + 786 i*sizeof(struct tx_status_words); 787 } else { 788 /* Symbios chips write only tx_errs word. */ 789 yp->tx_ring[j].dbdma_cmd = 790 cpu_to_le32(CMD_TXSTATUS | INTR_ALWAYS | 2); 791 yp->tx_ring[j].request_cnt = 2; 792 /* Om pade ummmmm... */ 793 yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma + 794 i*sizeof(struct tx_status_words) + 795 &(yp->tx_status[0].tx_errs) - 796 &(yp->tx_status[0])); 797 } 798 yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma + 799 ((j+1)%(2*TX_RING_SIZE))*sizeof(struct yellowfin_desc)); 800 } 801 /* Wrap ring */ 802 yp->tx_ring[++j].dbdma_cmd |= cpu_to_le32(BRANCH_ALWAYS | INTR_ALWAYS); 803} 804#endif 805 yp->tx_tail_desc = &yp->tx_status[0]; 806 return; 807} 808 809static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev) 810{ 811 struct yellowfin_private *yp = netdev_priv(dev); 812 unsigned entry; 813 int len = skb->len; 814 815 netif_stop_queue (dev); 816 817 /* Note: Ordering is important here, set the field with the 818 "ownership" bit last, and only then increment cur_tx. */ 819 820 /* Calculate the next Tx descriptor entry. */ 821 entry = yp->cur_tx % TX_RING_SIZE; 822 823 if (gx_fix) { /* Note: only works for paddable protocols e.g. IP. */ 824 int cacheline_end = ((unsigned long)skb->data + skb->len) % 32; 825 /* Fix GX chipset errata. */ 826 if (cacheline_end > 24 || cacheline_end == 0) { 827 len = skb->len + 32 - cacheline_end + 1; 828 if (skb_padto(skb, len)) { 829 yp->tx_skbuff[entry] = NULL; 830 netif_wake_queue(dev); 831 return 0; 832 } 833 } 834 } 835 yp->tx_skbuff[entry] = skb; 836 837#ifdef NO_TXSTATS 838 yp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev, 839 skb->data, len, PCI_DMA_TODEVICE)); 840 yp->tx_ring[entry].result_status = 0; 841 if (entry >= TX_RING_SIZE-1) { 842 /* New stop command. */ 843 yp->tx_ring[0].dbdma_cmd = cpu_to_le32(CMD_STOP); 844 yp->tx_ring[TX_RING_SIZE-1].dbdma_cmd = 845 cpu_to_le32(CMD_TX_PKT|BRANCH_ALWAYS | len); 846 } else { 847 yp->tx_ring[entry+1].dbdma_cmd = cpu_to_le32(CMD_STOP); 848 yp->tx_ring[entry].dbdma_cmd = 849 cpu_to_le32(CMD_TX_PKT | BRANCH_IFTRUE | len); 850 } 851 yp->cur_tx++; 852#else 853 yp->tx_ring[entry<<1].request_cnt = len; 854 yp->tx_ring[entry<<1].addr = cpu_to_le32(pci_map_single(yp->pci_dev, 855 skb->data, len, PCI_DMA_TODEVICE)); 856 /* The input_last (status-write) command is constant, but we must 857 rewrite the subsequent 'stop' command. */ 858 859 yp->cur_tx++; 860 { 861 unsigned next_entry = yp->cur_tx % TX_RING_SIZE; 862 yp->tx_ring[next_entry<<1].dbdma_cmd = cpu_to_le32(CMD_STOP); 863 } 864 /* Final step -- overwrite the old 'stop' command. */ 865 866 yp->tx_ring[entry<<1].dbdma_cmd = 867 cpu_to_le32( ((entry % 6) == 0 ? CMD_TX_PKT|INTR_ALWAYS|BRANCH_IFTRUE : 868 CMD_TX_PKT | BRANCH_IFTRUE) | len); 869#endif 870 871 /* Non-x86 Todo: explicitly flush cache lines here. */ 872 873 /* Wake the potentially-idle transmit channel. */ 874 iowrite32(0x10001000, yp->base + TxCtrl); 875 876 if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE) 877 netif_start_queue (dev); /* Typical path */ 878 else 879 yp->tx_full = 1; 880 dev->trans_start = jiffies; 881 882 if (yellowfin_debug > 4) { 883 printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n", 884 dev->name, yp->cur_tx, entry); 885 } 886 return 0; 887} 888 889/* The interrupt handler does all of the Rx thread work and cleans up 890 after the Tx thread. */ 891static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance, struct pt_regs *regs) 892{ 893 struct net_device *dev = dev_instance; 894 struct yellowfin_private *yp; 895 void __iomem *ioaddr; 896 int boguscnt = max_interrupt_work; 897 unsigned int handled = 0; 898 899#ifndef final_version /* Can never occur. */ 900 if (dev == NULL) { 901 printk (KERN_ERR "yellowfin_interrupt(): irq %d for unknown device.\n", irq); 902 return IRQ_NONE; 903 } 904#endif 905 906 yp = netdev_priv(dev); 907 ioaddr = yp->base; 908 909 spin_lock (&yp->lock); 910 911 do { 912 u16 intr_status = ioread16(ioaddr + IntrClear); 913 914 if (yellowfin_debug > 4) 915 printk(KERN_DEBUG "%s: Yellowfin interrupt, status %4.4x.\n", 916 dev->name, intr_status); 917 918 if (intr_status == 0) 919 break; 920 handled = 1; 921 922 if (intr_status & (IntrRxDone | IntrEarlyRx)) { 923 yellowfin_rx(dev); 924 iowrite32(0x10001000, ioaddr + RxCtrl); /* Wake Rx engine. */ 925 } 926 927#ifdef NO_TXSTATS 928 for (; yp->cur_tx - yp->dirty_tx > 0; yp->dirty_tx++) { 929 int entry = yp->dirty_tx % TX_RING_SIZE; 930 struct sk_buff *skb; 931 932 if (yp->tx_ring[entry].result_status == 0) 933 break; 934 skb = yp->tx_skbuff[entry]; 935 yp->stats.tx_packets++; 936 yp->stats.tx_bytes += skb->len; 937 /* Free the original skb. */ 938 pci_unmap_single(yp->pci_dev, yp->tx_ring[entry].addr, 939 skb->len, PCI_DMA_TODEVICE); 940 dev_kfree_skb_irq(skb); 941 yp->tx_skbuff[entry] = NULL; 942 } 943 if (yp->tx_full 944 && yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) { 945 /* The ring is no longer full, clear tbusy. */ 946 yp->tx_full = 0; 947 netif_wake_queue(dev); 948 } 949#else 950 if ((intr_status & IntrTxDone) || (yp->tx_tail_desc->tx_errs)) { 951 unsigned dirty_tx = yp->dirty_tx; 952 953 for (dirty_tx = yp->dirty_tx; yp->cur_tx - dirty_tx > 0; 954 dirty_tx++) { 955 /* Todo: optimize this. */ 956 int entry = dirty_tx % TX_RING_SIZE; 957 u16 tx_errs = yp->tx_status[entry].tx_errs; 958 struct sk_buff *skb; 959 960#ifndef final_version 961 if (yellowfin_debug > 5) 962 printk(KERN_DEBUG "%s: Tx queue %d check, Tx status " 963 "%4.4x %4.4x %4.4x %4.4x.\n", 964 dev->name, entry, 965 yp->tx_status[entry].tx_cnt, 966 yp->tx_status[entry].tx_errs, 967 yp->tx_status[entry].total_tx_cnt, 968 yp->tx_status[entry].paused); 969#endif 970 if (tx_errs == 0) 971 break; /* It still hasn't been Txed */ 972 skb = yp->tx_skbuff[entry]; 973 if (tx_errs & 0xF810) { 974 /* There was an major error, log it. */ 975#ifndef final_version 976 if (yellowfin_debug > 1) 977 printk(KERN_DEBUG "%s: Transmit error, Tx status %4.4x.\n", 978 dev->name, tx_errs); 979#endif 980 yp->stats.tx_errors++; 981 if (tx_errs & 0xF800) yp->stats.tx_aborted_errors++; 982 if (tx_errs & 0x0800) yp->stats.tx_carrier_errors++; 983 if (tx_errs & 0x2000) yp->stats.tx_window_errors++; 984 if (tx_errs & 0x8000) yp->stats.tx_fifo_errors++; 985 } else { 986#ifndef final_version 987 if (yellowfin_debug > 4) 988 printk(KERN_DEBUG "%s: Normal transmit, Tx status %4.4x.\n", 989 dev->name, tx_errs); 990#endif 991 yp->stats.tx_bytes += skb->len; 992 yp->stats.collisions += tx_errs & 15; 993 yp->stats.tx_packets++; 994 } 995 /* Free the original skb. */ 996 pci_unmap_single(yp->pci_dev, 997 yp->tx_ring[entry<<1].addr, skb->len, 998 PCI_DMA_TODEVICE); 999 dev_kfree_skb_irq(skb); 1000 yp->tx_skbuff[entry] = 0; 1001 /* Mark status as empty. */ 1002 yp->tx_status[entry].tx_errs = 0; 1003 } 1004 1005#ifndef final_version 1006 if (yp->cur_tx - dirty_tx > TX_RING_SIZE) { 1007 printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n", 1008 dev->name, dirty_tx, yp->cur_tx, yp->tx_full); 1009 dirty_tx += TX_RING_SIZE; 1010 } 1011#endif 1012 1013 if (yp->tx_full 1014 && yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) { 1015 /* The ring is no longer full, clear tbusy. */ 1016 yp->tx_full = 0; 1017 netif_wake_queue(dev); 1018 } 1019 1020 yp->dirty_tx = dirty_tx; 1021 yp->tx_tail_desc = &yp->tx_status[dirty_tx % TX_RING_SIZE]; 1022 } 1023#endif 1024 1025 /* Log errors and other uncommon events. */ 1026 if (intr_status & 0x2ee) /* Abnormal error summary. */ 1027 yellowfin_error(dev, intr_status); 1028 1029 if (--boguscnt < 0) { 1030 printk(KERN_WARNING "%s: Too much work at interrupt, " 1031 "status=0x%4.4x.\n", 1032 dev->name, intr_status); 1033 break; 1034 } 1035 } while (1); 1036 1037 if (yellowfin_debug > 3) 1038 printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", 1039 dev->name, ioread16(ioaddr + IntrStatus)); 1040 1041 spin_unlock (&yp->lock); 1042 return IRQ_RETVAL(handled); 1043} 1044 1045/* This routine is logically part of the interrupt handler, but separated 1046 for clarity and better register allocation. */ 1047static int yellowfin_rx(struct net_device *dev) 1048{ 1049 struct yellowfin_private *yp = netdev_priv(dev); 1050 int entry = yp->cur_rx % RX_RING_SIZE; 1051 int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx; 1052 1053 if (yellowfin_debug > 4) { 1054 printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %8.8x.\n", 1055 entry, yp->rx_ring[entry].result_status); 1056 printk(KERN_DEBUG " #%d desc. %8.8x %8.8x %8.8x.\n", 1057 entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr, 1058 yp->rx_ring[entry].result_status); 1059 } 1060 1061 /* If EOP is set on the next entry, it's a new packet. Send it up. */ 1062 while (1) { 1063 struct yellowfin_desc *desc = &yp->rx_ring[entry]; 1064 struct sk_buff *rx_skb = yp->rx_skbuff[entry]; 1065 s16 frame_status; 1066 u16 desc_status; 1067 int data_size; 1068 u8 *buf_addr; 1069 1070 if(!desc->result_status) 1071 break; 1072 pci_dma_sync_single_for_cpu(yp->pci_dev, desc->addr, 1073 yp->rx_buf_sz, PCI_DMA_FROMDEVICE); 1074 desc_status = le32_to_cpu(desc->result_status) >> 16; 1075 buf_addr = rx_skb->data; 1076 data_size = (le32_to_cpu(desc->dbdma_cmd) - 1077 le32_to_cpu(desc->result_status)) & 0xffff; 1078 frame_status = le16_to_cpu(get_unaligned((s16*)&(buf_addr[data_size - 2]))); 1079 if (yellowfin_debug > 4) 1080 printk(KERN_DEBUG " yellowfin_rx() status was %4.4x.\n", 1081 frame_status); 1082 if (--boguscnt < 0) 1083 break; 1084 if ( ! (desc_status & RX_EOP)) { 1085 if (data_size != 0) 1086 printk(KERN_WARNING "%s: Oversized Ethernet frame spanned multiple buffers," 1087 " status %4.4x, data_size %d!\n", dev->name, desc_status, data_size); 1088 yp->stats.rx_length_errors++; 1089 } else if ((yp->drv_flags & IsGigabit) && (frame_status & 0x0038)) { 1090 /* There was a error. */ 1091 if (yellowfin_debug > 3) 1092 printk(KERN_DEBUG " yellowfin_rx() Rx error was %4.4x.\n", 1093 frame_status); 1094 yp->stats.rx_errors++; 1095 if (frame_status & 0x0060) yp->stats.rx_length_errors++; 1096 if (frame_status & 0x0008) yp->stats.rx_frame_errors++; 1097 if (frame_status & 0x0010) yp->stats.rx_crc_errors++; 1098 if (frame_status < 0) yp->stats.rx_dropped++; 1099 } else if ( !(yp->drv_flags & IsGigabit) && 1100 ((buf_addr[data_size-1] & 0x85) || buf_addr[data_size-2] & 0xC0)) { 1101 u8 status1 = buf_addr[data_size-2]; 1102 u8 status2 = buf_addr[data_size-1]; 1103 yp->stats.rx_errors++; 1104 if (status1 & 0xC0) yp->stats.rx_length_errors++; 1105 if (status2 & 0x03) yp->stats.rx_frame_errors++; 1106 if (status2 & 0x04) yp->stats.rx_crc_errors++; 1107 if (status2 & 0x80) yp->stats.rx_dropped++; 1108#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */ 1109 } else if ((yp->flags & HasMACAddrBug) && 1110 memcmp(le32_to_cpu(yp->rx_ring_dma + 1111 entry*sizeof(struct yellowfin_desc)), 1112 dev->dev_addr, 6) != 0 && 1113 memcmp(le32_to_cpu(yp->rx_ring_dma + 1114 entry*sizeof(struct yellowfin_desc)), 1115 "\377\377\377\377\377\377", 6) != 0) { 1116 if (bogus_rx++ == 0) 1117 printk(KERN_WARNING "%s: Bad frame to %2.2x:%2.2x:%2.2x:%2.2x:" 1118 "%2.2x:%2.2x.\n", 1119 dev->name, buf_addr[0], buf_addr[1], buf_addr[2], 1120 buf_addr[3], buf_addr[4], buf_addr[5]); 1121#endif 1122 } else { 1123 struct sk_buff *skb; 1124 int pkt_len = data_size - 1125 (yp->chip_id ? 7 : 8 + buf_addr[data_size - 8]); 1126 /* To verify: Yellowfin Length should omit the CRC! */ 1127 1128#ifndef final_version 1129 if (yellowfin_debug > 4) 1130 printk(KERN_DEBUG " yellowfin_rx() normal Rx pkt length %d" 1131 " of %d, bogus_cnt %d.\n", 1132 pkt_len, data_size, boguscnt); 1133#endif 1134 /* Check if the packet is long enough to just pass up the skbuff 1135 without copying to a properly sized skbuff. */ 1136 if (pkt_len > rx_copybreak) { 1137 skb_put(skb = rx_skb, pkt_len); 1138 pci_unmap_single(yp->pci_dev, 1139 yp->rx_ring[entry].addr, 1140 yp->rx_buf_sz, 1141 PCI_DMA_FROMDEVICE); 1142 yp->rx_skbuff[entry] = NULL; 1143 } else { 1144 skb = dev_alloc_skb(pkt_len + 2); 1145 if (skb == NULL) 1146 break; 1147 skb->dev = dev; 1148 skb_reserve(skb, 2); /* 16 byte align the IP header */ 1149 eth_copy_and_sum(skb, rx_skb->data, pkt_len, 0); 1150 skb_put(skb, pkt_len); 1151 pci_dma_sync_single_for_device(yp->pci_dev, desc->addr, 1152 yp->rx_buf_sz, 1153 PCI_DMA_FROMDEVICE); 1154 } 1155 skb->protocol = eth_type_trans(skb, dev); 1156 netif_rx(skb); 1157 dev->last_rx = jiffies; 1158 yp->stats.rx_packets++; 1159 yp->stats.rx_bytes += pkt_len; 1160 } 1161 entry = (++yp->cur_rx) % RX_RING_SIZE; 1162 } 1163 1164 /* Refill the Rx ring buffers. */ 1165 for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) { 1166 entry = yp->dirty_rx % RX_RING_SIZE; 1167 if (yp->rx_skbuff[entry] == NULL) { 1168 struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz); 1169 if (skb == NULL) 1170 break; /* Better luck next round. */ 1171 yp->rx_skbuff[entry] = skb; 1172 skb->dev = dev; /* Mark as being used by this device. */ 1173 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ 1174 yp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev, 1175 skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE)); 1176 } 1177 yp->rx_ring[entry].dbdma_cmd = cpu_to_le32(CMD_STOP); 1178 yp->rx_ring[entry].result_status = 0; /* Clear complete bit. */ 1179 if (entry != 0) 1180 yp->rx_ring[entry - 1].dbdma_cmd = 1181 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz); 1182 else 1183 yp->rx_ring[RX_RING_SIZE - 1].dbdma_cmd = 1184 cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | BRANCH_ALWAYS 1185 | yp->rx_buf_sz); 1186 } 1187 1188 return 0; 1189} 1190 1191static void yellowfin_error(struct net_device *dev, int intr_status) 1192{ 1193 struct yellowfin_private *yp = netdev_priv(dev); 1194 1195 printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", 1196 dev->name, intr_status); 1197 /* Hmmmmm, it's not clear what to do here. */ 1198 if (intr_status & (IntrTxPCIErr | IntrTxPCIFault)) 1199 yp->stats.tx_errors++; 1200 if (intr_status & (IntrRxPCIErr | IntrRxPCIFault)) 1201 yp->stats.rx_errors++; 1202} 1203 1204static int yellowfin_close(struct net_device *dev) 1205{ 1206 struct yellowfin_private *yp = netdev_priv(dev); 1207 void __iomem *ioaddr = yp->base; 1208 int i; 1209 1210 netif_stop_queue (dev); 1211 1212 if (yellowfin_debug > 1) { 1213 printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x " 1214 "Rx %4.4x Int %2.2x.\n", 1215 dev->name, ioread16(ioaddr + TxStatus), 1216 ioread16(ioaddr + RxStatus), 1217 ioread16(ioaddr + IntrStatus)); 1218 printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", 1219 dev->name, yp->cur_tx, yp->dirty_tx, yp->cur_rx, yp->dirty_rx); 1220 } 1221 1222 /* Disable interrupts by clearing the interrupt mask. */ 1223 iowrite16(0x0000, ioaddr + IntrEnb); 1224 1225 /* Stop the chip's Tx and Rx processes. */ 1226 iowrite32(0x80000000, ioaddr + RxCtrl); 1227 iowrite32(0x80000000, ioaddr + TxCtrl); 1228 1229 del_timer(&yp->timer); 1230 1231#if defined(__i386__) 1232 if (yellowfin_debug > 2) { 1233 printk("\n"KERN_DEBUG" Tx ring at %8.8llx:\n", 1234 (unsigned long long)yp->tx_ring_dma); 1235 for (i = 0; i < TX_RING_SIZE*2; i++) 1236 printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n", 1237 ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ', 1238 i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr, 1239 yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status); 1240 printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status); 1241 for (i = 0; i < TX_RING_SIZE; i++) 1242 printk(" #%d status %4.4x %4.4x %4.4x %4.4x.\n", 1243 i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs, 1244 yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused); 1245 1246 printk("\n"KERN_DEBUG " Rx ring %8.8llx:\n", 1247 (unsigned long long)yp->rx_ring_dma); 1248 for (i = 0; i < RX_RING_SIZE; i++) { 1249 printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n", 1250 ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ', 1251 i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr, 1252 yp->rx_ring[i].result_status); 1253 if (yellowfin_debug > 6) { 1254 if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) { 1255 int j; 1256 for (j = 0; j < 0x50; j++) 1257 printk(" %4.4x", 1258 get_unaligned(((u16*)yp->rx_ring[i].addr) + j)); 1259 printk("\n"); 1260 } 1261 } 1262 } 1263 } 1264#endif /* __i386__ debugging only */ 1265 1266 free_irq(dev->irq, dev); 1267 1268 /* Free all the skbuffs in the Rx queue. */ 1269 for (i = 0; i < RX_RING_SIZE; i++) { 1270 yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP); 1271 yp->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */ 1272 if (yp->rx_skbuff[i]) { 1273 dev_kfree_skb(yp->rx_skbuff[i]); 1274 } 1275 yp->rx_skbuff[i] = NULL; 1276 } 1277 for (i = 0; i < TX_RING_SIZE; i++) { 1278 if (yp->tx_skbuff[i]) 1279 dev_kfree_skb(yp->tx_skbuff[i]); 1280 yp->tx_skbuff[i] = NULL; 1281 } 1282 1283#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */ 1284 if (yellowfin_debug > 0) { 1285 printk(KERN_DEBUG "%s: Received %d frames that we should not have.\n", 1286 dev->name, bogus_rx); 1287 } 1288#endif 1289 1290 return 0; 1291} 1292 1293static struct net_device_stats *yellowfin_get_stats(struct net_device *dev) 1294{ 1295 struct yellowfin_private *yp = netdev_priv(dev); 1296 return &yp->stats; 1297} 1298 1299/* Set or clear the multicast filter for this adaptor. */ 1300 1301static void set_rx_mode(struct net_device *dev) 1302{ 1303 struct yellowfin_private *yp = netdev_priv(dev); 1304 void __iomem *ioaddr = yp->base; 1305 u16 cfg_value = ioread16(ioaddr + Cnfg); 1306 1307 /* Stop the Rx process to change any value. */ 1308 iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg); 1309 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ 1310 /* Unconditionally log net taps. */ 1311 printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); 1312 iowrite16(0x000F, ioaddr + AddrMode); 1313 } else if ((dev->mc_count > 64) || (dev->flags & IFF_ALLMULTI)) { 1314 /* Too many to filter well, or accept all multicasts. */ 1315 iowrite16(0x000B, ioaddr + AddrMode); 1316 } else if (dev->mc_count > 0) { /* Must use the multicast hash table. */ 1317 struct dev_mc_list *mclist; 1318 u16 hash_table[4]; 1319 int i; 1320 memset(hash_table, 0, sizeof(hash_table)); 1321 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; 1322 i++, mclist = mclist->next) { 1323 unsigned int bit; 1324 1325 /* Due to a bug in the early chip versions, multiple filter 1326 slots must be set for each address. */ 1327 if (yp->drv_flags & HasMulticastBug) { 1328 bit = (ether_crc_le(3, mclist->dmi_addr) >> 3) & 0x3f; 1329 hash_table[bit >> 4] |= (1 << bit); 1330 bit = (ether_crc_le(4, mclist->dmi_addr) >> 3) & 0x3f; 1331 hash_table[bit >> 4] |= (1 << bit); 1332 bit = (ether_crc_le(5, mclist->dmi_addr) >> 3) & 0x3f; 1333 hash_table[bit >> 4] |= (1 << bit); 1334 } 1335 bit = (ether_crc_le(6, mclist->dmi_addr) >> 3) & 0x3f; 1336 hash_table[bit >> 4] |= (1 << bit); 1337 } 1338 /* Copy the hash table to the chip. */ 1339 for (i = 0; i < 4; i++) 1340 iowrite16(hash_table[i], ioaddr + HashTbl + i*2); 1341 iowrite16(0x0003, ioaddr + AddrMode); 1342 } else { /* Normal, unicast/broadcast-only mode. */ 1343 iowrite16(0x0001, ioaddr + AddrMode); 1344 } 1345 /* Restart the Rx process. */ 1346 iowrite16(cfg_value | 0x1000, ioaddr + Cnfg); 1347} 1348 1349static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) 1350{ 1351 struct yellowfin_private *np = netdev_priv(dev); 1352 strcpy(info->driver, DRV_NAME); 1353 strcpy(info->version, DRV_VERSION); 1354 strcpy(info->bus_info, pci_name(np->pci_dev)); 1355} 1356 1357static struct ethtool_ops ethtool_ops = { 1358 .get_drvinfo = yellowfin_get_drvinfo 1359}; 1360 1361static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 1362{ 1363 struct yellowfin_private *np = netdev_priv(dev); 1364 void __iomem *ioaddr = np->base; 1365 struct mii_ioctl_data *data = if_mii(rq); 1366 1367 switch(cmd) { 1368 case SIOCGMIIPHY: /* Get address of MII PHY in use. */ 1369 data->phy_id = np->phys[0] & 0x1f; 1370 /* Fall Through */ 1371 1372 case SIOCGMIIREG: /* Read MII PHY register. */ 1373 data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f); 1374 return 0; 1375 1376 case SIOCSMIIREG: /* Write MII PHY register. */ 1377 if (!capable(CAP_NET_ADMIN)) 1378 return -EPERM; 1379 if (data->phy_id == np->phys[0]) { 1380 u16 value = data->val_in; 1381 switch (data->reg_num) { 1382 case 0: 1383 /* Check for autonegotiation on or reset. */ 1384 np->medialock = (value & 0x9000) ? 0 : 1; 1385 if (np->medialock) 1386 np->full_duplex = (value & 0x0100) ? 1 : 0; 1387 break; 1388 case 4: np->advertising = value; break; 1389 } 1390 /* Perhaps check_duplex(dev), depending on chip semantics. */ 1391 } 1392 mdio_write(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); 1393 return 0; 1394 default: 1395 return -EOPNOTSUPP; 1396 } 1397} 1398 1399 1400static void __devexit yellowfin_remove_one (struct pci_dev *pdev) 1401{ 1402 struct net_device *dev = pci_get_drvdata(pdev); 1403 struct yellowfin_private *np; 1404 1405 BUG_ON(!dev); 1406 np = netdev_priv(dev); 1407 1408 pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status, 1409 np->tx_status_dma); 1410 pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma); 1411 pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma); 1412 unregister_netdev (dev); 1413 1414 pci_iounmap(pdev, np->base); 1415 1416 pci_release_regions (pdev); 1417 1418 free_netdev (dev); 1419 pci_set_drvdata(pdev, NULL); 1420} 1421 1422 1423static struct pci_driver yellowfin_driver = { 1424 .name = DRV_NAME, 1425 .id_table = yellowfin_pci_tbl, 1426 .probe = yellowfin_init_one, 1427 .remove = __devexit_p(yellowfin_remove_one), 1428}; 1429 1430 1431static int __init yellowfin_init (void) 1432{ 1433/* when a module, this is printed whether or not devices are found in probe */ 1434#ifdef MODULE 1435 printk(version); 1436#endif 1437 return pci_module_init (&yellowfin_driver); 1438} 1439 1440 1441static void __exit yellowfin_cleanup (void) 1442{ 1443 pci_unregister_driver (&yellowfin_driver); 1444} 1445 1446 1447module_init(yellowfin_init); 1448module_exit(yellowfin_cleanup); 1449 1450/* 1451 * Local variables: 1452 * compile-command: "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c yellowfin.c" 1453 * compile-command-alphaLX: "gcc -DMODULE -Wall -Wstrict-prototypes -O2 -c yellowfin.c -fomit-frame-pointer -fno-strength-reduce -mno-fp-regs -Wa,-m21164a -DBWX_USABLE -DBWIO_ENABLED" 1454 * simple-compile-command: "gcc -DMODULE -O6 -c yellowfin.c" 1455 * c-indent-level: 4 1456 * c-basic-offset: 4 1457 * tab-width: 4 1458 * End: 1459 */