Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tjh.dev
kernel
os
linux
1/*
2 * Header for MultiMediaCard (MMC)
3 *
4 * Copyright 2002 Hewlett-Packard Company
5 *
6 * Use consistent with the GNU GPL is permitted,
7 * provided that this copyright notice is
8 * preserved in its entirety in all copies and derived works.
9 *
10 * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
11 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
12 * FITNESS FOR ANY PARTICULAR PURPOSE.
13 *
14 * Many thanks to Alessandro Rubini and Jonathan Corbet!
15 *
16 * Based strongly on code by:
17 *
18 * Author: Yong-iL Joh <tolkien@mizi.com>
19 * Date : $Date: 2002/06/18 12:37:30 $
20 *
21 * Author: Andrew Christian
22 * 15 May 2002
23 */
24
25#ifndef MMC_MMC_PROTOCOL_H
26#define MMC_MMC_PROTOCOL_H
27
28/* Standard MMC commands (3.1) type argument response */
29 /* class 1 */
30#define MMC_GO_IDLE_STATE 0 /* bc */
31#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
32#define MMC_ALL_SEND_CID 2 /* bcr R2 */
33#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
34#define MMC_SET_DSR 4 /* bc [31:16] RCA */
35#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
36#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
37#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
38#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
39#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
40#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
41#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
42
43 /* class 2 */
44#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
45#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
46#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
47
48 /* class 3 */
49#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
50
51 /* class 4 */
52#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
53#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
54#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
55#define MMC_PROGRAM_CID 26 /* adtc R1 */
56#define MMC_PROGRAM_CSD 27 /* adtc R1 */
57
58 /* class 6 */
59#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
60#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
61#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
62
63 /* class 5 */
64#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
65#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
66#define MMC_ERASE 38 /* ac R1b */
67
68 /* class 9 */
69#define MMC_FAST_IO 39 /* ac <Complex> R4 */
70#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
71
72 /* class 7 */
73#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
74
75 /* class 8 */
76#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
77#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
78
79/* SD commands type argument response */
80 /* class 8 */
81/* This is basically the same command as for MMC with some quirks. */
82#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */
83
84 /* Application commands */
85#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
86#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
87#define SD_APP_SEND_SCR 51 /* adtc R1 */
88
89/*
90 MMC status in R1
91 Type
92 e : error bit
93 s : status bit
94 r : detected and set for the actual command response
95 x : detected and set during command execution. the host must poll
96 the card by sending status command in order to read these bits.
97 Clear condition
98 a : according to the card state
99 b : always related to the previous command. Reception of
100 a valid command will clear it (with a delay of one command)
101 c : clear by read
102 */
103
104#define R1_OUT_OF_RANGE (1 << 31) /* er, c */
105#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
106#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
107#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
108#define R1_ERASE_PARAM (1 << 27) /* ex, c */
109#define R1_WP_VIOLATION (1 << 26) /* erx, c */
110#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
111#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
112#define R1_COM_CRC_ERROR (1 << 23) /* er, b */
113#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
114#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
115#define R1_CC_ERROR (1 << 20) /* erx, c */
116#define R1_ERROR (1 << 19) /* erx, c */
117#define R1_UNDERRUN (1 << 18) /* ex, c */
118#define R1_OVERRUN (1 << 17) /* ex, c */
119#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
120#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
121#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
122#define R1_ERASE_RESET (1 << 13) /* sr, c */
123#define R1_STATUS(x) (x & 0xFFFFE000)
124#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
125#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
126#define R1_APP_CMD (1 << 5) /* sr, c */
127
128/* These are unpacked versions of the actual responses */
129
130struct _mmc_csd {
131 u8 csd_structure;
132 u8 spec_vers;
133 u8 taac;
134 u8 nsac;
135 u8 tran_speed;
136 u16 ccc;
137 u8 read_bl_len;
138 u8 read_bl_partial;
139 u8 write_blk_misalign;
140 u8 read_blk_misalign;
141 u8 dsr_imp;
142 u16 c_size;
143 u8 vdd_r_curr_min;
144 u8 vdd_r_curr_max;
145 u8 vdd_w_curr_min;
146 u8 vdd_w_curr_max;
147 u8 c_size_mult;
148 union {
149 struct { /* MMC system specification version 3.1 */
150 u8 erase_grp_size;
151 u8 erase_grp_mult;
152 } v31;
153 struct { /* MMC system specification version 2.2 */
154 u8 sector_size;
155 u8 erase_grp_size;
156 } v22;
157 } erase;
158 u8 wp_grp_size;
159 u8 wp_grp_enable;
160 u8 default_ecc;
161 u8 r2w_factor;
162 u8 write_bl_len;
163 u8 write_bl_partial;
164 u8 file_format_grp;
165 u8 copy;
166 u8 perm_write_protect;
167 u8 tmp_write_protect;
168 u8 file_format;
169 u8 ecc;
170};
171
172#define MMC_VDD_145_150 0x00000001 /* VDD voltage 1.45 - 1.50 */
173#define MMC_VDD_150_155 0x00000002 /* VDD voltage 1.50 - 1.55 */
174#define MMC_VDD_155_160 0x00000004 /* VDD voltage 1.55 - 1.60 */
175#define MMC_VDD_160_165 0x00000008 /* VDD voltage 1.60 - 1.65 */
176#define MMC_VDD_165_170 0x00000010 /* VDD voltage 1.65 - 1.70 */
177#define MMC_VDD_17_18 0x00000020 /* VDD voltage 1.7 - 1.8 */
178#define MMC_VDD_18_19 0x00000040 /* VDD voltage 1.8 - 1.9 */
179#define MMC_VDD_19_20 0x00000080 /* VDD voltage 1.9 - 2.0 */
180#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
181#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */
182#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */
183#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */
184#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */
185#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */
186#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */
187#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */
188#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */
189#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */
190#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */
191#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */
192#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */
193#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */
194#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */
195#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
196#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
197
198/*
199 * Card Command Classes (CCC)
200 */
201#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
202 /* (CMD0,1,2,3,4,7,9,10,12,13,15) */
203#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
204 /* (CMD11) */
205#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
206 /* (CMD16,17,18) */
207#define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */
208 /* (CMD20) */
209#define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */
210 /* (CMD16,24,25,26,27) */
211#define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */
212 /* (CMD32,33,34,35,36,37,38,39) */
213#define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */
214 /* (CMD28,29,30) */
215#define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */
216 /* (CMD16,CMD42) */
217#define CCC_APP_SPEC (1<<8) /* (8) Application specific */
218 /* (CMD55,56,57,ACMD*) */
219#define CCC_IO_MODE (1<<9) /* (9) I/O mode */
220 /* (CMD5,39,40,52,53) */
221#define CCC_SWITCH (1<<10) /* (10) High speed switch */
222 /* (CMD6,34,35,36,37,50) */
223 /* (11) Reserved */
224 /* (CMD?) */
225
226/*
227 * CSD field definitions
228 */
229
230#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
231#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
232#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */
233
234#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
235#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
236#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
237#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */
238
239
240/*
241 * SD bus widths
242 */
243#define SD_BUS_WIDTH_1 0
244#define SD_BUS_WIDTH_4 2
245
246#endif /* MMC_MMC_PROTOCOL_H */
247