tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1Driver for Trust Computer Products Framegrabber, version 0.6.1
2------ --- ----- -------- -------- ------------ ------- - - -
3
4- ZORAN ------------------------------------------------------
5 Author: Pauline Middelink <middelin@polyware.nl>
6 Date: 18 September 1999
7Version: 0.6.1
8
9- Description ------------------------------------------------
10
11Video4Linux compatible driver for an unknown brand framegrabber
12(Sold in the Netherlands by TRUST Computer Products) and various
13other zoran zr36120 based framegrabbers.
14
15The card contains a ZR36120 Multimedia PCI Interface and a Philips
16SAA7110 Onechip Frontend videodecoder. There is also an DSP of
17which I have forgotten the number, since i will never get that thing
18to work without specs from the vendor itself.
19
20The SAA711x are capable of processing 6 different video inputs,
21CVBS1..6 and Y1+C1, Y2+C2, Y3+C3. All in 50/60Hz, NTSC, PAL or
22SECAM and delivering a YUV datastream. On my card the input
23'CVBS-0' corresponds to channel CVBS2 and 'S-Video' to Y2+C2.
24
25I have some reports of other cards working with the mentioned
26chip sets. For a list of other working cards please have a look
27at the cards named in the tvcards struct in the beginning of
28zr36120.c
29
30After some testing, I discovered that the carddesigner messed up
31on the I2C interface. The Zoran chip includes 2 lines SDA and SCL
32which (s)he connected reversely. So we have to clock on the SDA
33and r/w data on the SCL pin. Life is fun... Each cardtype now has
34a bit which signifies if you have a card with the same deficiency.
35
36Oh, for the completeness of this story I must mention that my
37card delivers the VSYNC pulse of the SAA chip to GIRQ1, not
38GIRQ0 as some other cards have. This is also incorporated in
39the driver be clearing/setting the 'useirq1' bit in the tvcard
40description.
41
42Another problems of continuous capturing data with a Zoran chip
43is something nasty inside the chip. It effectively halves the
44fps we ought to get... Here is the scenario: capturing frames
45to memory is done in the so-called snapshot mode. In this mode
46the Zoran stops after capturing a frame worth of data and wait
47till the application set GRAB bit to indicate readiness for the
48next frame. After detecting a set bit, the chip neatly waits
49till the start of a frame, captures it and it goes back to off.
50Smart ppl will notice the problem here. Its the waiting on the
51_next_ frame each time we set the GRAB bit... Oh well, 12,5 fps
52is still plenty fast for me.
53-- update 28/7/1999 --
54Don't believe a word I just said... Proof is the output
55of `streamer -t 300 -r 25 -f avi15 -o /dev/null`
56 ++--+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
57 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
58 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
59 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
60 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
61 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
62 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
63 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
64 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
65 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
66 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25
67 +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+-
68 syncer: done
69 writer: done
70(note the /dev/null is prudent here, my system is not able to
71 grab /and/ write 25 fps to a file... gifts welcome :) )
72The technical reasoning follows: The zoran completed the last
73frame, the VSYNC goes low, and GRAB is cleared. The interrupt
74routine starts to work since its VSYNC driven, and again
75activates the GRAB bit. A few ms later the VSYNC (re-)rises and
76the zoran starts to work on a new and freshly broadcasted frame....
77
78For pointers I used the specs of both chips. Below are the URLs:
79 http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf
80 http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf
81Some alternatives for the Philips SAA 7110 datasheet are:
82 http://www.datasheetcatalog.com/datasheets_pdf/S/A/A/7/SAA7110.shtml
83 http://www.datasheetarchive.com/search.php?search=SAA7110&sType=part
84
85The documentation has very little on absolute numbers or timings
86needed for the various modes/resolutions, but there are other
87programs you can borrow those from.
88
89------ Install --------------------------------------------
90Read the file called TODO. Note its long list of limitations.
91
92Build a kernel with VIDEO4LINUX enabled. Activate the
93BT848 driver; we need this because we have need for the
94other modules (i2c and videodev) it enables.
95
96To install this software, extract it into a suitable directory.
97Examine the makefile and change anything you don't like. Type "make".
98
99After making the modules check if you have the much needed
100/dev/video devices. If not, execute the following 4 lines:
101 mknod /dev/video c 81 0
102 mknod /dev/video1 c 81 1
103 mknod /dev/video2 c 81 2
104 mknod /dev/video3 c 81 3
105 mknod /dev/video4 c 81 4
106
107After making/checking the devices do:
108 modprobe i2c
109 modprobe videodev
110 modprobe saa7110 (optional)
111 modprobe saa7111 (optional)
112 modprobe tuner (optional)
113 insmod zoran cardtype=<n>
114
115<n> is the cardtype of the card you have. The cardnumber can
116be found in the source of zr36120. Look for tvcards. If your
117card is not there, please try if any other card gives some
118response, and mail me if you got a working tvcard addition.
119
120PS. <TVCard editors behold!)
121 Dont forget to set video_input to the number of inputs
122 you defined in the video_mux part of the tvcard definition.
123 Its a common error to add a channel but not incrementing
124 video_input and getting angry with me/v4l/linux/linus :(
125
126You are now ready to test the framegrabber with your favorite
127video4linux compatible tool
128
129------ Application ----------------------------------------
130
131This device works with all Video4Linux compatible applications,
132given the limitations in the TODO file.
133
134------ API ------------------------------------------------
135
136This uses the V4L interface as of kernel release 2.1.116, and in
137fact has not been tested on any lower version. There are a couple
138of minor differences due to the fact that the amount of data returned
139with each frame varies, and no doubt there are discrepancies due to my
140misunderstanding of the API. I intend to convert this driver to the
141new V4L2 API when it has stabilized more.
142
143------ Current state --------------------------------------
144
145The driver is capable of overlaying a video image in screen, and
146even capable of grabbing frames. It uses the BIGPHYSAREA patch
147to allocate lots of large memory blocks when tis patch is
148found in the kernel, but it doesn't need it.
149The consequence is that, when loading the driver as a module,
150the module may tell you it's out of memory, but 'free' says
151otherwise. The reason is simple; the modules wants its memory
152contiguous, not fragmented, and after a long uptime there
153probably isn't a fragment of memory large enough...
154
155The driver uses a double buffering scheme, which should really
156be an n-way buffer, depending on the size of allocated framebuffer
157and the requested grab-size/format.
158This current version also fixes a dead-lock situation during irq
159time, which really, really froze my system... :)
160
161Good luck.
162 Pauline