at v2.6.16 6.9 kB view raw
1/* 2 * INET An implementation of the TCP/IP protocol suite for the LINUX 3 * operating system. INET is implemented using the BSD Socket 4 * interface as the means of communication with the user level. 5 * 6 * Global definitions for the INET interface module. 7 * 8 * Version: @(#)if.h 1.0.2 04/18/93 9 * 10 * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988 11 * Ross Biro 12 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> 13 * 14 * This program is free software; you can redistribute it and/or 15 * modify it under the terms of the GNU General Public License 16 * as published by the Free Software Foundation; either version 17 * 2 of the License, or (at your option) any later version. 18 */ 19#ifndef _LINUX_IF_H 20#define _LINUX_IF_H 21 22#include <linux/types.h> /* for "__kernel_caddr_t" et al */ 23#include <linux/socket.h> /* for "struct sockaddr" et al */ 24#include <linux/compiler.h> /* for "__user" et al */ 25 26#define IFNAMSIZ 16 27#include <linux/hdlc/ioctl.h> 28 29/* Standard interface flags (netdevice->flags). */ 30#define IFF_UP 0x1 /* interface is up */ 31#define IFF_BROADCAST 0x2 /* broadcast address valid */ 32#define IFF_DEBUG 0x4 /* turn on debugging */ 33#define IFF_LOOPBACK 0x8 /* is a loopback net */ 34#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */ 35#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */ 36#define IFF_RUNNING 0x40 /* interface running and carrier ok */ 37#define IFF_NOARP 0x80 /* no ARP protocol */ 38#define IFF_PROMISC 0x100 /* receive all packets */ 39#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/ 40 41#define IFF_MASTER 0x400 /* master of a load balancer */ 42#define IFF_SLAVE 0x800 /* slave of a load balancer */ 43 44#define IFF_MULTICAST 0x1000 /* Supports multicast */ 45 46#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING) 47 48#define IFF_PORTSEL 0x2000 /* can set media type */ 49#define IFF_AUTOMEDIA 0x4000 /* auto media select active */ 50#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ 51 52/* Private (from user) interface flags (netdevice->priv_flags). */ 53#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */ 54#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */ 55 56#define IF_GET_IFACE 0x0001 /* for querying only */ 57#define IF_GET_PROTO 0x0002 58 59/* For definitions see hdlc.h */ 60#define IF_IFACE_V35 0x1000 /* V.35 serial interface */ 61#define IF_IFACE_V24 0x1001 /* V.24 serial interface */ 62#define IF_IFACE_X21 0x1002 /* X.21 serial interface */ 63#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */ 64#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */ 65#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */ 66#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */ 67 68/* For definitions see hdlc.h */ 69#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */ 70#define IF_PROTO_PPP 0x2001 /* PPP protocol */ 71#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */ 72#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */ 73#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */ 74#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */ 75#define IF_PROTO_X25 0x2006 /* X.25 */ 76#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */ 77#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */ 78#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */ 79#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */ 80#define IF_PROTO_FR_ETH_PVC 0x200B 81#define IF_PROTO_RAW 0x200C /* RAW Socket */ 82 83 84/* 85 * Device mapping structure. I'd just gone off and designed a 86 * beautiful scheme using only loadable modules with arguments 87 * for driver options and along come the PCMCIA people 8) 88 * 89 * Ah well. The get() side of this is good for WDSETUP, and it'll 90 * be handy for debugging things. The set side is fine for now and 91 * being very small might be worth keeping for clean configuration. 92 */ 93 94struct ifmap 95{ 96 unsigned long mem_start; 97 unsigned long mem_end; 98 unsigned short base_addr; 99 unsigned char irq; 100 unsigned char dma; 101 unsigned char port; 102 /* 3 bytes spare */ 103}; 104 105struct if_settings 106{ 107 unsigned int type; /* Type of physical device or protocol */ 108 unsigned int size; /* Size of the data allocated by the caller */ 109 union { 110 /* {atm/eth/dsl}_settings anyone ? */ 111 raw_hdlc_proto __user *raw_hdlc; 112 cisco_proto __user *cisco; 113 fr_proto __user *fr; 114 fr_proto_pvc __user *fr_pvc; 115 fr_proto_pvc_info __user *fr_pvc_info; 116 117 /* interface settings */ 118 sync_serial_settings __user *sync; 119 te1_settings __user *te1; 120 } ifs_ifsu; 121}; 122 123/* 124 * Interface request structure used for socket 125 * ioctl's. All interface ioctl's must have parameter 126 * definitions which begin with ifr_name. The 127 * remainder may be interface specific. 128 */ 129 130struct ifreq 131{ 132#define IFHWADDRLEN 6 133 union 134 { 135 char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */ 136 } ifr_ifrn; 137 138 union { 139 struct sockaddr ifru_addr; 140 struct sockaddr ifru_dstaddr; 141 struct sockaddr ifru_broadaddr; 142 struct sockaddr ifru_netmask; 143 struct sockaddr ifru_hwaddr; 144 short ifru_flags; 145 int ifru_ivalue; 146 int ifru_mtu; 147 struct ifmap ifru_map; 148 char ifru_slave[IFNAMSIZ]; /* Just fits the size */ 149 char ifru_newname[IFNAMSIZ]; 150 void __user * ifru_data; 151 struct if_settings ifru_settings; 152 } ifr_ifru; 153}; 154 155#define ifr_name ifr_ifrn.ifrn_name /* interface name */ 156#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */ 157#define ifr_addr ifr_ifru.ifru_addr /* address */ 158#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */ 159#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */ 160#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */ 161#define ifr_flags ifr_ifru.ifru_flags /* flags */ 162#define ifr_metric ifr_ifru.ifru_ivalue /* metric */ 163#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */ 164#define ifr_map ifr_ifru.ifru_map /* device map */ 165#define ifr_slave ifr_ifru.ifru_slave /* slave device */ 166#define ifr_data ifr_ifru.ifru_data /* for use by interface */ 167#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */ 168#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */ 169#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */ 170#define ifr_newname ifr_ifru.ifru_newname /* New name */ 171#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/ 172 173/* 174 * Structure used in SIOCGIFCONF request. 175 * Used to retrieve interface configuration 176 * for machine (useful for programs which 177 * must know all networks accessible). 178 */ 179 180struct ifconf 181{ 182 int ifc_len; /* size of buffer */ 183 union 184 { 185 char __user *ifcu_buf; 186 struct ifreq __user *ifcu_req; 187 } ifc_ifcu; 188}; 189#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */ 190#define ifc_req ifc_ifcu.ifcu_req /* array of structures */ 191 192 193#endif /* _LINUX_IF_H */