at v2.6.16 18 kB view raw
1/****************************************************************************** 2 * 3 * Module Name: psparse - Parser top level AML parse routines 4 * 5 *****************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2006, R. Byron Moore 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44/* 45 * Parse the AML and build an operation tree as most interpreters, 46 * like Perl, do. Parsing is done by hand rather than with a YACC 47 * generated parser to tightly constrain stack and dynamic memory 48 * usage. At the same time, parsing is kept flexible and the code 49 * fairly compact by parsing based on a list of AML opcode 50 * templates in aml_op_info[] 51 */ 52 53#include <acpi/acpi.h> 54#include <acpi/acparser.h> 55#include <acpi/acdispat.h> 56#include <acpi/amlcode.h> 57#include <acpi/acnamesp.h> 58#include <acpi/acinterp.h> 59 60#define _COMPONENT ACPI_PARSER 61ACPI_MODULE_NAME("psparse") 62 63/******************************************************************************* 64 * 65 * FUNCTION: acpi_ps_get_opcode_size 66 * 67 * PARAMETERS: Opcode - An AML opcode 68 * 69 * RETURN: Size of the opcode, in bytes (1 or 2) 70 * 71 * DESCRIPTION: Get the size of the current opcode. 72 * 73 ******************************************************************************/ 74u32 acpi_ps_get_opcode_size(u32 opcode) 75{ 76 77 /* Extended (2-byte) opcode if > 255 */ 78 79 if (opcode > 0x00FF) { 80 return (2); 81 } 82 83 /* Otherwise, just a single byte opcode */ 84 85 return (1); 86} 87 88/******************************************************************************* 89 * 90 * FUNCTION: acpi_ps_peek_opcode 91 * 92 * PARAMETERS: parser_state - A parser state object 93 * 94 * RETURN: Next AML opcode 95 * 96 * DESCRIPTION: Get next AML opcode (without incrementing AML pointer) 97 * 98 ******************************************************************************/ 99 100u16 acpi_ps_peek_opcode(struct acpi_parse_state * parser_state) 101{ 102 u8 *aml; 103 u16 opcode; 104 105 aml = parser_state->aml; 106 opcode = (u16) ACPI_GET8(aml); 107 108 if (opcode == AML_EXTENDED_OP_PREFIX) { 109 /* Extended opcode, get the second opcode byte */ 110 111 aml++; 112 opcode = (u16) ((opcode << 8) | ACPI_GET8(aml)); 113 } 114 115 return (opcode); 116} 117 118/******************************************************************************* 119 * 120 * FUNCTION: acpi_ps_complete_this_op 121 * 122 * PARAMETERS: walk_state - Current State 123 * Op - Op to complete 124 * 125 * RETURN: Status 126 * 127 * DESCRIPTION: Perform any cleanup at the completion of an Op. 128 * 129 ******************************************************************************/ 130 131acpi_status 132acpi_ps_complete_this_op(struct acpi_walk_state * walk_state, 133 union acpi_parse_object * op) 134{ 135 union acpi_parse_object *prev; 136 union acpi_parse_object *next; 137 const struct acpi_opcode_info *parent_info; 138 union acpi_parse_object *replacement_op = NULL; 139 140 ACPI_FUNCTION_TRACE_PTR("ps_complete_this_op", op); 141 142 /* Check for null Op, can happen if AML code is corrupt */ 143 144 if (!op) { 145 return_ACPI_STATUS(AE_OK); /* OK for now */ 146 } 147 148 /* Delete this op and the subtree below it if asked to */ 149 150 if (((walk_state->parse_flags & ACPI_PARSE_TREE_MASK) != 151 ACPI_PARSE_DELETE_TREE) 152 || (walk_state->op_info->class == AML_CLASS_ARGUMENT)) { 153 return_ACPI_STATUS(AE_OK); 154 } 155 156 /* Make sure that we only delete this subtree */ 157 158 if (op->common.parent) { 159 prev = op->common.parent->common.value.arg; 160 if (!prev) { 161 /* Nothing more to do */ 162 163 goto cleanup; 164 } 165 166 /* 167 * Check if we need to replace the operator and its subtree 168 * with a return value op (placeholder op) 169 */ 170 parent_info = 171 acpi_ps_get_opcode_info(op->common.parent->common. 172 aml_opcode); 173 174 switch (parent_info->class) { 175 case AML_CLASS_CONTROL: 176 break; 177 178 case AML_CLASS_CREATE: 179 180 /* 181 * These opcodes contain term_arg operands. The current 182 * op must be replaced by a placeholder return op 183 */ 184 replacement_op = 185 acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP); 186 if (!replacement_op) { 187 goto allocate_error; 188 } 189 break; 190 191 case AML_CLASS_NAMED_OBJECT: 192 193 /* 194 * These opcodes contain term_arg operands. The current 195 * op must be replaced by a placeholder return op 196 */ 197 if ((op->common.parent->common.aml_opcode == 198 AML_REGION_OP) 199 || (op->common.parent->common.aml_opcode == 200 AML_DATA_REGION_OP) 201 || (op->common.parent->common.aml_opcode == 202 AML_BUFFER_OP) 203 || (op->common.parent->common.aml_opcode == 204 AML_PACKAGE_OP) 205 || (op->common.parent->common.aml_opcode == 206 AML_VAR_PACKAGE_OP)) { 207 replacement_op = 208 acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP); 209 if (!replacement_op) { 210 goto allocate_error; 211 } 212 } else 213 if ((op->common.parent->common.aml_opcode == 214 AML_NAME_OP) 215 && (walk_state->pass_number <= 216 ACPI_IMODE_LOAD_PASS2)) { 217 if ((op->common.aml_opcode == AML_BUFFER_OP) 218 || (op->common.aml_opcode == AML_PACKAGE_OP) 219 || (op->common.aml_opcode == 220 AML_VAR_PACKAGE_OP)) { 221 replacement_op = 222 acpi_ps_alloc_op(op->common. 223 aml_opcode); 224 if (!replacement_op) { 225 goto allocate_error; 226 } 227 228 replacement_op->named.data = 229 op->named.data; 230 replacement_op->named.length = 231 op->named.length; 232 } 233 } 234 break; 235 236 default: 237 238 replacement_op = 239 acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP); 240 if (!replacement_op) { 241 goto allocate_error; 242 } 243 } 244 245 /* We must unlink this op from the parent tree */ 246 247 if (prev == op) { 248 /* This op is the first in the list */ 249 250 if (replacement_op) { 251 replacement_op->common.parent = 252 op->common.parent; 253 replacement_op->common.value.arg = NULL; 254 replacement_op->common.node = op->common.node; 255 op->common.parent->common.value.arg = 256 replacement_op; 257 replacement_op->common.next = op->common.next; 258 } else { 259 op->common.parent->common.value.arg = 260 op->common.next; 261 } 262 } 263 264 /* Search the parent list */ 265 266 else 267 while (prev) { 268 /* Traverse all siblings in the parent's argument list */ 269 270 next = prev->common.next; 271 if (next == op) { 272 if (replacement_op) { 273 replacement_op->common.parent = 274 op->common.parent; 275 replacement_op->common.value. 276 arg = NULL; 277 replacement_op->common.node = 278 op->common.node; 279 prev->common.next = 280 replacement_op; 281 replacement_op->common.next = 282 op->common.next; 283 next = NULL; 284 } else { 285 prev->common.next = 286 op->common.next; 287 next = NULL; 288 } 289 } 290 prev = next; 291 } 292 } 293 294 cleanup: 295 296 /* Now we can actually delete the subtree rooted at Op */ 297 298 acpi_ps_delete_parse_tree(op); 299 return_ACPI_STATUS(AE_OK); 300 301 allocate_error: 302 303 /* Always delete the subtree, even on error */ 304 305 acpi_ps_delete_parse_tree(op); 306 return_ACPI_STATUS(AE_NO_MEMORY); 307} 308 309/******************************************************************************* 310 * 311 * FUNCTION: acpi_ps_next_parse_state 312 * 313 * PARAMETERS: walk_state - Current state 314 * Op - Current parse op 315 * callback_status - Status from previous operation 316 * 317 * RETURN: Status 318 * 319 * DESCRIPTION: Update the parser state based upon the return exception from 320 * the parser callback. 321 * 322 ******************************************************************************/ 323 324acpi_status 325acpi_ps_next_parse_state(struct acpi_walk_state *walk_state, 326 union acpi_parse_object *op, 327 acpi_status callback_status) 328{ 329 struct acpi_parse_state *parser_state = &walk_state->parser_state; 330 acpi_status status = AE_CTRL_PENDING; 331 332 ACPI_FUNCTION_TRACE_PTR("ps_next_parse_state", op); 333 334 switch (callback_status) { 335 case AE_CTRL_TERMINATE: 336 /* 337 * A control method was terminated via a RETURN statement. 338 * The walk of this method is complete. 339 */ 340 parser_state->aml = parser_state->aml_end; 341 status = AE_CTRL_TERMINATE; 342 break; 343 344 case AE_CTRL_BREAK: 345 346 parser_state->aml = walk_state->aml_last_while; 347 walk_state->control_state->common.value = FALSE; 348 status = acpi_ds_result_stack_pop(walk_state); 349 if (ACPI_SUCCESS(status)) { 350 status = AE_CTRL_BREAK; 351 } 352 break; 353 354 case AE_CTRL_CONTINUE: 355 356 parser_state->aml = walk_state->aml_last_while; 357 status = acpi_ds_result_stack_pop(walk_state); 358 if (ACPI_SUCCESS(status)) { 359 status = AE_CTRL_CONTINUE; 360 } 361 break; 362 363 case AE_CTRL_PENDING: 364 365 parser_state->aml = walk_state->aml_last_while; 366 break; 367 368#if 0 369 case AE_CTRL_SKIP: 370 371 parser_state->aml = parser_state->scope->parse_scope.pkg_end; 372 status = AE_OK; 373 break; 374#endif 375 376 case AE_CTRL_TRUE: 377 /* 378 * Predicate of an IF was true, and we are at the matching ELSE. 379 * Just close out this package 380 */ 381 parser_state->aml = acpi_ps_get_next_package_end(parser_state); 382 status = acpi_ds_result_stack_pop(walk_state); 383 if (ACPI_SUCCESS(status)) { 384 status = AE_CTRL_PENDING; 385 } 386 break; 387 388 case AE_CTRL_FALSE: 389 /* 390 * Either an IF/WHILE Predicate was false or we encountered a BREAK 391 * opcode. In both cases, we do not execute the rest of the 392 * package; We simply close out the parent (finishing the walk of 393 * this branch of the tree) and continue execution at the parent 394 * level. 395 */ 396 parser_state->aml = parser_state->scope->parse_scope.pkg_end; 397 398 /* In the case of a BREAK, just force a predicate (if any) to FALSE */ 399 400 walk_state->control_state->common.value = FALSE; 401 status = AE_CTRL_END; 402 break; 403 404 case AE_CTRL_TRANSFER: 405 406 /* A method call (invocation) -- transfer control */ 407 408 status = AE_CTRL_TRANSFER; 409 walk_state->prev_op = op; 410 walk_state->method_call_op = op; 411 walk_state->method_call_node = 412 (op->common.value.arg)->common.node; 413 414 /* Will return value (if any) be used by the caller? */ 415 416 walk_state->return_used = 417 acpi_ds_is_result_used(op, walk_state); 418 break; 419 420 default: 421 422 status = callback_status; 423 if ((callback_status & AE_CODE_MASK) == AE_CODE_CONTROL) { 424 status = AE_OK; 425 } 426 break; 427 } 428 429 return_ACPI_STATUS(status); 430} 431 432/******************************************************************************* 433 * 434 * FUNCTION: acpi_ps_parse_aml 435 * 436 * PARAMETERS: walk_state - Current state 437 * 438 * 439 * RETURN: Status 440 * 441 * DESCRIPTION: Parse raw AML and return a tree of ops 442 * 443 ******************************************************************************/ 444 445acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state) 446{ 447 acpi_status status; 448 struct acpi_thread_state *thread; 449 struct acpi_thread_state *prev_walk_list = acpi_gbl_current_walk_list; 450 struct acpi_walk_state *previous_walk_state; 451 452 ACPI_FUNCTION_TRACE("ps_parse_aml"); 453 454 ACPI_DEBUG_PRINT((ACPI_DB_PARSE, 455 "Entered with walk_state=%p Aml=%p size=%X\n", 456 walk_state, walk_state->parser_state.aml, 457 walk_state->parser_state.aml_size)); 458 459 /* Create and initialize a new thread state */ 460 461 thread = acpi_ut_create_thread_state(); 462 if (!thread) { 463 return_ACPI_STATUS(AE_NO_MEMORY); 464 } 465 466 walk_state->thread = thread; 467 acpi_ds_push_walk_state(walk_state, thread); 468 469 /* 470 * This global allows the AML debugger to get a handle to the currently 471 * executing control method. 472 */ 473 acpi_gbl_current_walk_list = thread; 474 475 /* 476 * Execute the walk loop as long as there is a valid Walk State. This 477 * handles nested control method invocations without recursion. 478 */ 479 ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state)); 480 481 status = AE_OK; 482 while (walk_state) { 483 if (ACPI_SUCCESS(status)) { 484 /* 485 * The parse_loop executes AML until the method terminates 486 * or calls another method. 487 */ 488 status = acpi_ps_parse_loop(walk_state); 489 } 490 491 ACPI_DEBUG_PRINT((ACPI_DB_PARSE, 492 "Completed one call to walk loop, %s State=%p\n", 493 acpi_format_exception(status), walk_state)); 494 495 if (status == AE_CTRL_TRANSFER) { 496 /* 497 * A method call was detected. 498 * Transfer control to the called control method 499 */ 500 status = 501 acpi_ds_call_control_method(thread, walk_state, 502 NULL); 503 504 /* 505 * If the transfer to the new method method call worked, a new walk 506 * state was created -- get it 507 */ 508 walk_state = acpi_ds_get_current_walk_state(thread); 509 continue; 510 } else if (status == AE_CTRL_TERMINATE) { 511 status = AE_OK; 512 } else if ((status != AE_OK) && (walk_state->method_desc)) { 513 /* Either the method parse or actual execution failed */ 514 515 ACPI_ERROR_METHOD("Method parse/execution failed", 516 walk_state->method_node, NULL, 517 status); 518 519 /* Check for possible multi-thread reentrancy problem */ 520 521 if ((status == AE_ALREADY_EXISTS) && 522 (!walk_state->method_desc->method.semaphore)) { 523 /* 524 * Method tried to create an object twice. The probable cause is 525 * that the method cannot handle reentrancy. 526 * 527 * The method is marked not_serialized, but it tried to create 528 * a named object, causing the second thread entrance to fail. 529 * Workaround this problem by marking the method permanently 530 * as Serialized. 531 */ 532 walk_state->method_desc->method.method_flags |= 533 AML_METHOD_SERIALIZED; 534 walk_state->method_desc->method.concurrency = 1; 535 } 536 } 537 538 /* We are done with this walk, move on to the parent if any */ 539 540 walk_state = acpi_ds_pop_walk_state(thread); 541 542 /* Reset the current scope to the beginning of scope stack */ 543 544 acpi_ds_scope_stack_clear(walk_state); 545 546 /* 547 * If we just returned from the execution of a control method or if we 548 * encountered an error during the method parse phase, there's lots of 549 * cleanup to do 550 */ 551 if (((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) == 552 ACPI_PARSE_EXECUTE) || (ACPI_FAILURE(status))) { 553 if (walk_state->method_desc) { 554 /* Decrement the thread count on the method parse tree */ 555 556 if (walk_state->method_desc->method. 557 thread_count) { 558 walk_state->method_desc->method. 559 thread_count--; 560 } else { 561 ACPI_ERROR((AE_INFO, 562 "Invalid zero thread count in method")); 563 } 564 } 565 566 acpi_ds_terminate_control_method(walk_state); 567 } 568 569 /* Delete this walk state and all linked control states */ 570 571 acpi_ps_cleanup_scope(&walk_state->parser_state); 572 previous_walk_state = walk_state; 573 574 ACPI_DEBUG_PRINT((ACPI_DB_PARSE, 575 "return_value=%p, implicit_value=%p State=%p\n", 576 walk_state->return_desc, 577 walk_state->implicit_return_obj, walk_state)); 578 579 /* Check if we have restarted a preempted walk */ 580 581 walk_state = acpi_ds_get_current_walk_state(thread); 582 if (walk_state) { 583 if (ACPI_SUCCESS(status)) { 584 /* 585 * There is another walk state, restart it. 586 * If the method return value is not used by the parent, 587 * The object is deleted 588 */ 589 if (!previous_walk_state->return_desc) { 590 status = 591 acpi_ds_restart_control_method 592 (walk_state, 593 previous_walk_state-> 594 implicit_return_obj); 595 } else { 596 /* 597 * We have a valid return value, delete any implicit 598 * return value. 599 */ 600 acpi_ds_clear_implicit_return 601 (previous_walk_state); 602 603 status = 604 acpi_ds_restart_control_method 605 (walk_state, 606 previous_walk_state->return_desc); 607 } 608 if (ACPI_SUCCESS(status)) { 609 walk_state->walk_type |= 610 ACPI_WALK_METHOD_RESTART; 611 } 612 } else { 613 /* On error, delete any return object */ 614 615 acpi_ut_remove_reference(previous_walk_state-> 616 return_desc); 617 } 618 } 619 620 /* 621 * Just completed a 1st-level method, save the final internal return 622 * value (if any) 623 */ 624 else if (previous_walk_state->caller_return_desc) { 625 if (previous_walk_state->implicit_return_obj) { 626 *(previous_walk_state->caller_return_desc) = 627 previous_walk_state->implicit_return_obj; 628 } else { 629 /* NULL if no return value */ 630 631 *(previous_walk_state->caller_return_desc) = 632 previous_walk_state->return_desc; 633 } 634 } else { 635 if (previous_walk_state->return_desc) { 636 /* Caller doesn't want it, must delete it */ 637 638 acpi_ut_remove_reference(previous_walk_state-> 639 return_desc); 640 } 641 if (previous_walk_state->implicit_return_obj) { 642 /* Caller doesn't want it, must delete it */ 643 644 acpi_ut_remove_reference(previous_walk_state-> 645 implicit_return_obj); 646 } 647 } 648 649 acpi_ds_delete_walk_state(previous_walk_state); 650 } 651 652 /* Normal exit */ 653 654 acpi_ex_release_all_mutexes(thread); 655 acpi_ut_delete_generic_state(ACPI_CAST_PTR 656 (union acpi_generic_state, thread)); 657 acpi_gbl_current_walk_list = prev_walk_list; 658 return_ACPI_STATUS(status); 659}