at v2.6.15 11 kB view raw
1 2/****************************************************************************** 3 * 4 * Module Name: exutils - interpreter/scanner utilities 5 * 6 *****************************************************************************/ 7 8/* 9 * Copyright (C) 2000 - 2005, R. Byron Moore 10 * All rights reserved. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions, and the following disclaimer, 17 * without modification. 18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 19 * substantially similar to the "NO WARRANTY" disclaimer below 20 * ("Disclaimer") and any redistribution must be conditioned upon 21 * including a substantially similar Disclaimer requirement for further 22 * binary redistribution. 23 * 3. Neither the names of the above-listed copyright holders nor the names 24 * of any contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * Alternatively, this software may be distributed under the terms of the 28 * GNU General Public License ("GPL") version 2 as published by the Free 29 * Software Foundation. 30 * 31 * NO WARRANTY 32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 42 * POSSIBILITY OF SUCH DAMAGES. 43 */ 44 45/* 46 * DEFINE_AML_GLOBALS is tested in amlcode.h 47 * to determine whether certain global names should be "defined" or only 48 * "declared" in the current compilation. This enhances maintainability 49 * by enabling a single header file to embody all knowledge of the names 50 * in question. 51 * 52 * Exactly one module of any executable should #define DEFINE_GLOBALS 53 * before #including the header files which use this convention. The 54 * names in question will be defined and initialized in that module, 55 * and declared as extern in all other modules which #include those 56 * header files. 57 */ 58 59#define DEFINE_AML_GLOBALS 60 61#include <acpi/acpi.h> 62#include <acpi/acinterp.h> 63#include <acpi/amlcode.h> 64#include <acpi/acevents.h> 65 66#define _COMPONENT ACPI_EXECUTER 67ACPI_MODULE_NAME("exutils") 68 69/* Local prototypes */ 70static u32 acpi_ex_digits_needed(acpi_integer value, u32 base); 71 72#ifndef ACPI_NO_METHOD_EXECUTION 73/******************************************************************************* 74 * 75 * FUNCTION: acpi_ex_enter_interpreter 76 * 77 * PARAMETERS: None 78 * 79 * RETURN: Status 80 * 81 * DESCRIPTION: Enter the interpreter execution region. Failure to enter 82 * the interpreter region is a fatal system error 83 * 84 ******************************************************************************/ 85 86acpi_status acpi_ex_enter_interpreter(void) 87{ 88 acpi_status status; 89 90 ACPI_FUNCTION_TRACE("ex_enter_interpreter"); 91 92 status = acpi_ut_acquire_mutex(ACPI_MTX_EXECUTE); 93 if (ACPI_FAILURE(status)) { 94 ACPI_REPORT_ERROR(("Could not acquire interpreter mutex\n")); 95 } 96 97 return_ACPI_STATUS(status); 98} 99 100/******************************************************************************* 101 * 102 * FUNCTION: acpi_ex_exit_interpreter 103 * 104 * PARAMETERS: None 105 * 106 * RETURN: None 107 * 108 * DESCRIPTION: Exit the interpreter execution region 109 * 110 * Cases where the interpreter is unlocked: 111 * 1) Completion of the execution of a control method 112 * 2) Method blocked on a Sleep() AML opcode 113 * 3) Method blocked on an Acquire() AML opcode 114 * 4) Method blocked on a Wait() AML opcode 115 * 5) Method blocked to acquire the global lock 116 * 6) Method blocked to execute a serialized control method that is 117 * already executing 118 * 7) About to invoke a user-installed opregion handler 119 * 120 ******************************************************************************/ 121 122void acpi_ex_exit_interpreter(void) 123{ 124 acpi_status status; 125 126 ACPI_FUNCTION_TRACE("ex_exit_interpreter"); 127 128 status = acpi_ut_release_mutex(ACPI_MTX_EXECUTE); 129 if (ACPI_FAILURE(status)) { 130 ACPI_REPORT_ERROR(("Could not release interpreter mutex\n")); 131 } 132 133 return_VOID; 134} 135 136/******************************************************************************* 137 * 138 * FUNCTION: acpi_ex_truncate_for32bit_table 139 * 140 * PARAMETERS: obj_desc - Object to be truncated 141 * 142 * RETURN: none 143 * 144 * DESCRIPTION: Truncate a number to 32-bits if the currently executing method 145 * belongs to a 32-bit ACPI table. 146 * 147 ******************************************************************************/ 148 149void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc) 150{ 151 152 ACPI_FUNCTION_ENTRY(); 153 154 /* 155 * Object must be a valid number and we must be executing 156 * a control method 157 */ 158 if ((!obj_desc) || 159 (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER)) { 160 return; 161 } 162 163 if (acpi_gbl_integer_byte_width == 4) { 164 /* 165 * We are running a method that exists in a 32-bit ACPI table. 166 * Truncate the value to 32 bits by zeroing out the upper 32-bit field 167 */ 168 obj_desc->integer.value &= (acpi_integer) ACPI_UINT32_MAX; 169 } 170} 171 172/******************************************************************************* 173 * 174 * FUNCTION: acpi_ex_acquire_global_lock 175 * 176 * PARAMETERS: field_flags - Flags with Lock rule: 177 * always_lock or never_lock 178 * 179 * RETURN: TRUE/FALSE indicating whether the lock was actually acquired 180 * 181 * DESCRIPTION: Obtain the global lock and keep track of this fact via two 182 * methods. A global variable keeps the state of the lock, and 183 * the state is returned to the caller. 184 * 185 ******************************************************************************/ 186 187u8 acpi_ex_acquire_global_lock(u32 field_flags) 188{ 189 u8 locked = FALSE; 190 acpi_status status; 191 192 ACPI_FUNCTION_TRACE("ex_acquire_global_lock"); 193 194 /* Only attempt lock if the always_lock bit is set */ 195 196 if (field_flags & AML_FIELD_LOCK_RULE_MASK) { 197 /* We should attempt to get the lock, wait forever */ 198 199 status = acpi_ev_acquire_global_lock(ACPI_WAIT_FOREVER); 200 if (ACPI_SUCCESS(status)) { 201 locked = TRUE; 202 } else { 203 ACPI_DEBUG_PRINT((ACPI_DB_ERROR, 204 "Could not acquire Global Lock, %s\n", 205 acpi_format_exception(status))); 206 } 207 } 208 209 return_VALUE(locked); 210} 211 212/******************************************************************************* 213 * 214 * FUNCTION: acpi_ex_release_global_lock 215 * 216 * PARAMETERS: locked_by_me - Return value from corresponding call to 217 * acquire_global_lock. 218 * 219 * RETURN: None 220 * 221 * DESCRIPTION: Release the global lock if it is locked. 222 * 223 ******************************************************************************/ 224 225void acpi_ex_release_global_lock(u8 locked_by_me) 226{ 227 acpi_status status; 228 229 ACPI_FUNCTION_TRACE("ex_release_global_lock"); 230 231 /* Only attempt unlock if the caller locked it */ 232 233 if (locked_by_me) { 234 /* OK, now release the lock */ 235 236 status = acpi_ev_release_global_lock(); 237 if (ACPI_FAILURE(status)) { 238 /* Report the error, but there isn't much else we can do */ 239 240 ACPI_REPORT_ERROR(("Could not release ACPI Global Lock, %s\n", acpi_format_exception(status))); 241 } 242 } 243 244 return_VOID; 245} 246 247/******************************************************************************* 248 * 249 * FUNCTION: acpi_ex_digits_needed 250 * 251 * PARAMETERS: Value - Value to be represented 252 * Base - Base of representation 253 * 254 * RETURN: The number of digits. 255 * 256 * DESCRIPTION: Calculate the number of digits needed to represent the Value 257 * in the given Base (Radix) 258 * 259 ******************************************************************************/ 260 261static u32 acpi_ex_digits_needed(acpi_integer value, u32 base) 262{ 263 u32 num_digits; 264 acpi_integer current_value; 265 266 ACPI_FUNCTION_TRACE("ex_digits_needed"); 267 268 /* acpi_integer is unsigned, so we don't worry about a '-' prefix */ 269 270 if (value == 0) { 271 return_VALUE(1); 272 } 273 274 current_value = value; 275 num_digits = 0; 276 277 /* Count the digits in the requested base */ 278 279 while (current_value) { 280 (void)acpi_ut_short_divide(current_value, base, &current_value, 281 NULL); 282 num_digits++; 283 } 284 285 return_VALUE(num_digits); 286} 287 288/******************************************************************************* 289 * 290 * FUNCTION: acpi_ex_eisa_id_to_string 291 * 292 * PARAMETERS: numeric_id - EISA ID to be converted 293 * out_string - Where to put the converted string (8 bytes) 294 * 295 * RETURN: None 296 * 297 * DESCRIPTION: Convert a numeric EISA ID to string representation 298 * 299 ******************************************************************************/ 300 301void acpi_ex_eisa_id_to_string(u32 numeric_id, char *out_string) 302{ 303 u32 eisa_id; 304 305 ACPI_FUNCTION_ENTRY(); 306 307 /* Swap ID to big-endian to get contiguous bits */ 308 309 eisa_id = acpi_ut_dword_byte_swap(numeric_id); 310 311 out_string[0] = (char)('@' + (((unsigned long)eisa_id >> 26) & 0x1f)); 312 out_string[1] = (char)('@' + ((eisa_id >> 21) & 0x1f)); 313 out_string[2] = (char)('@' + ((eisa_id >> 16) & 0x1f)); 314 out_string[3] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 12); 315 out_string[4] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 8); 316 out_string[5] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 4); 317 out_string[6] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 0); 318 out_string[7] = 0; 319} 320 321/******************************************************************************* 322 * 323 * FUNCTION: acpi_ex_unsigned_integer_to_string 324 * 325 * PARAMETERS: Value - Value to be converted 326 * out_string - Where to put the converted string (8 bytes) 327 * 328 * RETURN: None, string 329 * 330 * DESCRIPTION: Convert a number to string representation. Assumes string 331 * buffer is large enough to hold the string. 332 * 333 ******************************************************************************/ 334 335void acpi_ex_unsigned_integer_to_string(acpi_integer value, char *out_string) 336{ 337 u32 count; 338 u32 digits_needed; 339 u32 remainder; 340 341 ACPI_FUNCTION_ENTRY(); 342 343 digits_needed = acpi_ex_digits_needed(value, 10); 344 out_string[digits_needed] = 0; 345 346 for (count = digits_needed; count > 0; count--) { 347 (void)acpi_ut_short_divide(value, 10, &value, &remainder); 348 out_string[count - 1] = (char)('0' + remainder); 349 } 350} 351 352#endif