tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
1/*
2 * linux/drivers/char/8250.h
3 *
4 * Driver for 8250/16550-type serial ports
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright (C) 2001 Russell King.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
16 */
17
18#include <linux/config.h>
19#include <linux/serial_8250.h>
20
21struct old_serial_port {
22 unsigned int uart;
23 unsigned int baud_base;
24 unsigned int port;
25 unsigned int irq;
26 unsigned int flags;
27 unsigned char hub6;
28 unsigned char io_type;
29 unsigned char *iomem_base;
30 unsigned short iomem_reg_shift;
31};
32
33/*
34 * This replaces serial_uart_config in include/linux/serial.h
35 */
36struct serial8250_config {
37 const char *name;
38 unsigned short fifo_size;
39 unsigned short tx_loadsz;
40 unsigned char fcr;
41 unsigned int flags;
42};
43
44#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */
45#define UART_CAP_EFR (1 << 9) /* UART has EFR */
46#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */
47#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
48#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
49
50#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
51#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
52
53#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
54#define _INLINE_ inline
55#else
56#define _INLINE_
57#endif
58
59#define PROBE_RSA (1 << 0)
60#define PROBE_ANY (~0)
61
62#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
63
64#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
65#define SERIAL8250_SHARE_IRQS 1
66#else
67#define SERIAL8250_SHARE_IRQS 0
68#endif
69
70#if defined(__alpha__) && !defined(CONFIG_PCI)
71/*
72 * Digital did something really horribly wrong with the OUT1 and OUT2
73 * lines on at least some ALPHA's. The failure mode is that if either
74 * is cleared, the machine locks up with endless interrupts.
75 */
76#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1)
77#elif defined(CONFIG_SBC8560)
78/*
79 * WindRiver did something similarly broken on their SBC8560 board. The
80 * UART tristates its IRQ output while OUT2 is clear, but they pulled
81 * the interrupt line _up_ instead of down, so if we register the IRQ
82 * while the UART is in that state, we die in an IRQ storm. */
83#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
84#else
85#define ALPHA_KLUDGE_MCR 0
86#endif